Upload
phamnhan
View
214
Download
0
Embed Size (px)
Citation preview
Piston PumPs
• Wide range of controls
• Standard ISO and SAE mounting and porting
• Nominal pressure: 210 bar
• Low noise and high efficiency
• Very suitable for industrail application
• Totally interchangeable to Vickers pumps PVQ and PVB series and Denison pumps PV series
hydraut.com
SERIES HY-PVB/HY-PVQ
HY-PVB5/45
FEatuRES
WaRnIng
HY piston pumps are inline, variable volume units available in 4 frame sizes and 8 displacements. The wide variety of controls and overall efficiency make them ideal for the most demanding industrial applications.
ECONOMICAL PVB series combine qualityperformance with low overall cost.
QUIETNoise levels are below theindustry standards.
EFFICIENTHigh volumetric and overallefficiency for industrial applications.
CONTROLSVariety of manual and compensatingcontrols provide fast stable control of units.
MOUNTINGMountings, shafts and port sizes areSAE standard. Metric units available onrequest.
Piston Pump Ordering Specifications HY PVB10 F R C C 70
Frame Size 5/6 -10/15 Design 20/29- 45A/45 Optional maximum volume stop (see page B1.8) Optional foot bracket Control (See Page B1.7/B1.8) Rotation R-C.W. L-C.C.W
Before starting fill pump case with system fluid through uppermost drain port. Housing must be kept full at all times to provide internal lubrication.
HY piston pumps are inline, variable volume units available in 4 frame sizes and 8 displacements. The wide variety of controls and overall efficiency make them ideal for the most demanding industrial applications.
ECONOMICAL PVB series combine qualityperformance with low overall cost.
QUIETNoise levels are below theindustry standards.
EFFICIENTHigh volumetric and overallefficiency for industrial applications.
CONTROLSVariety of manual and compensatingcontrols provide fast stable control of units.
MOUNTINGMountings, shafts and port sizes areSAE standard. Metric units available onrequest.
Piston Pump Ordering Specifications HY PVB10 F R C C 70
Frame Size 5/6 -10/15 Design 20/29- 45A/45 Optional maximum volume stop (see page B1.8) Optional foot bracket Control (See Page B1.7/B1.8) Rotation R-C.W. L-C.C.W
Before starting fill pump case with system fluid through uppermost drain port. Housing must be kept full at all times to provide internal lubrication.
HY piston pumps are inline, variable volume units available in 4 frame sizes and 8 displacements. The wide variety of controls and overall efficiency make them ideal for the most demanding industrial applications.
ECONOMICAL PVB series combine qualityperformance with low overall cost.
QUIETNoise levels are below theindustry standards.
EFFICIENTHigh volumetric and overallefficiency for industrial applications.
CONTROLSVariety of manual and compensatingcontrols provide fast stable control of units.
MOUNTINGMountings, shafts and port sizes areSAE standard. Metric units available onrequest.
Piston Pump Ordering Specifications HY PVB10 F R C C 70
Frame Size 5/6 -10/15 Design 20/29- 45A/45 Optional maximum volume stop (see page B1.8) Optional foot bracket Control (See Page B1.7/B1.8) Rotation R-C.W. L-C.C.W
Before starting fill pump case with system fluid through uppermost drain port. Housing must be kept full at all times to provide internal lubrication.
HY piston pumps are inline, variable volume units available in 4 frame sizes and 8 displacements. The wide variety of controls and overall efficiency make them ideal for the most demanding industrial applications.
ECONOMICAL PVB series combine qualityperformance with low overall cost.
QUIETNoise levels are below theindustry standards.
EFFICIENTHigh volumetric and overallefficiency for industrial applications.
CONTROLSVariety of manual and compensatingcontrols provide fast stable control of units.
MOUNTINGMountings, shafts and port sizes areSAE standard. Metric units available onrequest.
Piston Pump Ordering Specifications HY PVB10 F R C C 70
Frame Size 5/6 -10/15 Design 20/29- 45A/45 Optional maximum volume stop (see page B1.8) Optional foot bracket Control (See Page B1.7/B1.8) Rotation R-C.W. L-C.C.W
Before starting fill pump case with system fluid through uppermost drain port. Housing must be kept full at all times to provide internal lubrication.
VARiABLE DisPLACEmEnt PumPs
hydraut.com
2
MODEL PVB5BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
6543210
121086420
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 500 1000 1500 2000 2500 3000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
MODEL PVB10BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
1086420
24201612840
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 500 1000 1500 2000 2500 3000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
MODEL PVB20BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
454035302520151050
454035302520151050
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 500 1000 1500 2000 2500 3000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
MODEL PVB6BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
876543210
8
6
4
2
0
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 500 1000 1500 2000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
MODEL PVB15BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
6543210
211815129630
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 250 500 750 1000 1250 1500 1750 2000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
MODEL PVB29BASED ON OIL TEMPERATURE OF 120° F (100 SUS)1800 RPM INPUT-ATMOSPHERIC INLET
50454035302520151050
50454035302520151050
1009080706050403020100
EFF
ICE
NC
Y-P
ER
CE
NT
DE
LIV
ER
Y -
GPM
HO
RSE
POW
ER
0 250 500 750 1000 1250 1500 1750 2000 OUTLET PRESSURE - PSI
VOLUMETRIC EFFICIENCY
OVERALL EFFICIENCY
DELIVERY
INPUT HORSEPOWER-FULL FLOW
PERFORManCE CuRVES
HY-PVB5/45VARiABLE DisPLACEmEnt PumPs
hydraut.com
3
aPPLICatIOn guIDELInES
tECHnICaL Data
B1.3
SHAFT ALIGNMENTPVB units are designed for "inline drive" with a flexible coupling. Side loading the shaft is not recommended .
FILL PUMP CASINGBefore starting, fill case with system fluid through upper most drain port. Pipework must be installed in such a way as to ensure that the case is always full of oil during operation.
Note: -Max. case pressure 5 PSI.
STARTINGDuring initial starting it may be necessary to bleed air from pump outlet. HY air bleed valve ABT 02S is available for this purpose.
SYSTEM RELIEF VALVEAlthough PVB series pumps have compensator controls, a system relief valve is recommanded for safety considerations.
Values based on using anti-wear type petroleum oil 150 SUS at 100° F and 0 PSI inlet pressure
MODEL DISPL.
HYPVB5 .643HYPVB6 .843HYPVB10 1.29HYPVB15 2.01HYPVB20 2.61HYPVB29 3.76HYPVB45 5.76
DELIVERY (GPM) AT1800 MAX.RPM RPM5 106.5 11.410 1815 26.220 2629 3845 55
MAX. SPEED RPMAnti-wear oil HWBF
3600 3200 3200 3000 1800 2400 2400 2200
MAX. PRESSURE PSIAnti-wear oil HWBF
3000 2000 3000 2000 1000 3000 2000 3000
WGT.LBS.161630305757210
MODEL
HYPVB5/6
HYPVB10/15
HYPVB20/29
REV OUTLETr/min PSI 10001200 2000 3000 10001800 2000 3000 10001200 2000 3000 10001800 2000 3000 10001200 2000 3000 10001800 2000 3000
CUT-OFF FULL DISPL.
56 5959 6162 57 6262 636457 5762 6264 62 6265 696858 7762 776563 6468 6971
SOUND LEVELPER ISO 4412 NOISE dB(A)
HY-PVB5/45VARiABLE DisPLACEmEnt PumPs
hydraut.com
4
HY-PVB5/6VARiABLE DisPLACEmEnt PumPs
InStaLLatIOn DIMEnSIOnS
InStaLLatIOn DIMEnSIOnS
HY-PVB10/15
Alternate case drain connection
2.06
3.12
1.125
2.67
5.35
Connections A&B ports 1 1/6-12 UN-2B straight thd. for .75 O.D. tubing
3.34 1.12
CW- Increase pressureCCW - Decrease pressure
.437D2 holes
.47 R 2.09
4.18
Compensator positionfor L.H. rotation models
Case drain connection.562-18 UN-2B straightthd for .375 O.D tubing
Compensator positionfor R.H. rotation models
4.28
6.41
6.97
6.44
3.25
1.75.1875 square key
IFP
Rotation Oil port Inlet/OutletR.H A BL.H B A
Bracket mount availablePart NBR- HY-A
4.87
7.63
8.19
7.44
4.00 D
.875 D
2.31
.25 square key
IFP
.562 D2 holes
.52 R 2.875
5.75
Compensator positionfor R.H. rotation models
Case drain connection.7500-16 UNF straightthd for .50 O.D tubing
Compensator positionfor L.H. rotation models
Rotation Oil port Inlet/OutletR.H A BL.H B A
Bracket mount availablePart NBR- HY-B
Alternate case drain connection
2.56
3.25
7.36
Connections A&B ports 1 1.625-12 UN-2B straight thd. for 1.25 O.D. tubing
CW- Increase pressureCCW - Decrease pressure
A B
3.34 1.12
DIMENSION (INCHES)
DIMENSION (INCHES)
A B
1.31
0.75
VARiABLE DisPLACEmEnt PumPs
Alternate case drain connection
2.06
3.12
1.125
2.67
5.35
Connections A&B ports 1 1/6-12 UN-2B straight thd. for .75 O.D. tubing
3.34 1.12
CW- Increase pressureCCW - Decrease pressure
.437D2 holes
.47 R 2.09
4.18
Compensator positionfor L.H. rotation models
Case drain connection.562-18 UN-2B straightthd for .375 O.D tubing
Compensator positionfor R.H. rotation models
4.28
6.41
6.97
6.44
3.25
1.75.1875 square key
IFP
Rotation Oil port Inlet/OutletR.H A BL.H B A
Bracket mount availablePart NBR- HY-A
4.87
7.63
8.19
7.44
4.00 D
.875 D
2.31
.25 square key
IFP
.562 D2 holes
.52 R 2.875
5.75
Compensator positionfor R.H. rotation models
Case drain connection.7500-16 UNF straightthd for .50 O.D tubing
Compensator positionfor L.H. rotation models
Rotation Oil port Inlet/OutletR.H A BL.H B A
Bracket mount availablePart NBR- HY-B
Alternate case drain connection
2.56
3.25
7.36
Connections A&B ports 1 1.625-12 UN-2B straight thd. for 1.25 O.D. tubing
CW- Increase pressureCCW - Decrease pressure
A B
3.34 1.12
DIMENSION (INCHES)
DIMENSION (INCHES)
A B
1.31
0.75
hydraut.com
5
InStaLLatIOn DIMEnSIOnS
SIDE PORt OPtIOn
HY-PVB5/6 HY-PVB10/15 HY PVB20/29
IFP
11.62
4.86
8.73
9.3
2.32
1.25 D5.000/4.998 D
3.56
7.125
.75 R
Case drain connection .750-16 UNF
.688 D 2 HOLES
CONNECTION A&B 1.625-12N SAE "O" RING1.25 "O" D TUBING
3.75 Ref
3.69
4.44
8.88
1.62
1.123.34
CW- Increase pressureCCW- Decrease pressure
.3125Square key
Port A Port B Port A Port B
Port A
Port B
Rotation Oil port Inlet/OutletR.H A BL.H B A
Bracket mount availablePart NBR- HY-C
Connection A & BHYPVB5/6 1" O.D Tubing /1.312-12UNFHYPVB10/15 1 1/4 O.D Tubing/1.625-16UNFHYPVB20/29 1 1/2 SAE 4 Bolt Flange
A B
DIMENSION (INCHES)
HY-PVB20/29VARiABLE DisPLACEmEnt PumPs
hydraut.com
6
InStaLLatIOn InFORMatIOn
HY
DIMENSION (INCHES)
HY-PVB45aVARiABLE DisPLACEmEnt PumPs
hydraut.com
7
3.182
6.364 square
IFP
IFP
6.0005.998
.5
3.2212.13
12.78
.62
4.16
16
2.72.437SQUARE KEY
4.11 6.5 .86
8.13
ALTERNATE CASEDRAIN CONNECTION
CASE DRAIN CONNECTION1.062-12 UN-28 THD.
SAE. STRAIGHT THD. FOR.750 O.D. TUBING-2 PLACE
COMPENSATORADJUSTMENT
SCREW
.656 D.4 HOLES
.343 D. 2 HOLESFOR DOWELING
3.25
6.50SQUARE
11.125
13.88
11.76
11.62
5.73
11.60
OUTLET CONNECTIONFOR R.H. ROTATION MODELS2" Dia. Flange
OUTLET CONNECTIONFOR L.H. ROTATION 2" Dia. Flange
DIMENSION (INCHES)
FLANGE MOUNTED UNIT
FOOT MOUNTED UNIT
DIMENSION (INCHES)
InStaLLatIOn DIMEnSIOnS
HY-PVB45VARiABLE DisPLACEmEnt PumPs
hydraut.com
8
OPtIOnaL COntROLS
HY-PVB5/45VARiABLE DisPLACEmEnt PumPs
B1.7
Load sensing comp. controlport .4375-20 UNF-2Bconnected to downstreampressure
- Pressure compensator- "C" control maintains pump volume requirements of the system until a preselected operating pressure is reached. Pump displacement is then reduced to zero
"CM" range 250 - 1500 PSI"C" range 250 - 3000 PSI
Available in frame sizes HYPVB5 to HYPVB45
- Remote pressure compensator- "CG" control operates same as "C" control except pressure setting can be adjusted using a remote relief valve (HY-C175-*-70) connected to the remote control port.
Available in frame sizes HYPVB5 to HYPVB29
Available in frame sizes HYPVB5 to HYPVB29
- Load sensing/pressure limiter- "CVP" compensator provides load sensing control to automatically adjust pump flow in response to a remote pressure signal. A compensator control is also incorporated to limit maximum working pressure.
TO PUMP CASING
TO CONTROL PISTON
SYSTEM PRESSURE
ADJ. SCREWSPRINGBODYSPOOL
.4375-20 UNF-2B thd.remote control port
B1.7
Load sensing comp. controlport .4375-20 UNF-2Bconnected to downstreampressure
- Pressure compensator- "C" control maintains pump volume requirements of the system until a preselected operating pressure is reached. Pump displacement is then reduced to zero
"CM" range 250 - 1500 PSI"C" range 250 - 3000 PSI
Available in frame sizes HYPVB5 to HYPVB45
- Remote pressure compensator- "CG" control operates same as "C" control except pressure setting can be adjusted using a remote relief valve (HY-C175-*-70) connected to the remote control port.
Available in frame sizes HYPVB5 to HYPVB29
Available in frame sizes HYPVB5 to HYPVB29
- Load sensing/pressure limiter- "CVP" compensator provides load sensing control to automatically adjust pump flow in response to a remote pressure signal. A compensator control is also incorporated to limit maximum working pressure.
TO PUMP CASING
TO CONTROL PISTON
SYSTEM PRESSURE
ADJ. SCREWSPRINGBODYSPOOL
.4375-20 UNF-2B thd.remote control port
B1.7
Load sensing comp. controlport .4375-20 UNF-2Bconnected to downstreampressure
- Pressure compensator- "C" control maintains pump volume requirements of the system until a preselected operating pressure is reached. Pump displacement is then reduced to zero
"CM" range 250 - 1500 PSI"C" range 250 - 3000 PSI
Available in frame sizes HYPVB5 to HYPVB45
- Remote pressure compensator- "CG" control operates same as "C" control except pressure setting can be adjusted using a remote relief valve (HY-C175-*-70) connected to the remote control port.
Available in frame sizes HYPVB5 to HYPVB29
Available in frame sizes HYPVB5 to HYPVB29
- Load sensing/pressure limiter- "CVP" compensator provides load sensing control to automatically adjust pump flow in response to a remote pressure signal. A compensator control is also incorporated to limit maximum working pressure.
TO PUMP CASING
TO CONTROL PISTON
SYSTEM PRESSURE
ADJ. SCREWSPRINGBODYSPOOL
.4375-20 UNF-2B thd.remote control port
COntROL “CM”(942159n)COntROL “C” (942158n)
COntROL “Cg”(942480n)
COntROL “CVP”(924069n)
hydraut.com
9
Maximum volume stop incorporates the "C" compensator with an djustable volume stop. The maximum pump delivery is externally adjusted.
-Level control- "M" control provides manual adjustment of pump flow. Level must be secured in position to maintain prespected flow.
-Handwhell control- Turning handwheel provides over- center control of pump output flow.
Rotation Level Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Shaft Rotation Pointer Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Available in frame size HYPVB5 to HYPVB29
Neutral
Position 1 Position 2
Neutral
Position 1
Position 2
Available in frame size HYPVB5 to HYPVB15
Available in frame size HYPVB5 to HYPVB15
MODEL Max stop S/A No. Adj. Rod Adapter blockHYPVB5 /6 L.H -** 942188N 354573N 354578NHYPVB5 /6 R.H -** 942189N 354573N 354579NHYPVB10/15 L.H -** 942190N 354574N 354579NHYPVB10/15 R.H -** 942191N 354574N 354578NHYPVB20/29 L.H -** 942192N 354575N 354578NHYPVB20/29 R.H -** 942192N 354575N 354578N
(C.W- decrease)(C.C.W.- increase)
BACK-UP RING"O" RING
Control piston/assemblyValve plate
Maximum Stop
Compensator
Adj. Rod
Adapter Block
COntROL “C”
Maximum volume stop incorporates the "C" compensator with an djustable volume stop. The maximum pump delivery is externally adjusted.
-Level control- "M" control provides manual adjustment of pump flow. Level must be secured in position to maintain prespected flow.
-Handwhell control- Turning handwheel provides over- center control of pump output flow.
Rotation Level Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Shaft Rotation Pointer Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Available in frame size HYPVB5 to HYPVB29
Neutral
Position 1 Position 2
Neutral
Position 1
Position 2
Available in frame size HYPVB5 to HYPVB15
Available in frame size HYPVB5 to HYPVB15
MODEL Max stop S/A No. Adj. Rod Adapter blockHYPVB5 /6 L.H -** 942188N 354573N 354578NHYPVB5 /6 R.H -** 942189N 354573N 354579NHYPVB10/15 L.H -** 942190N 354574N 354579NHYPVB10/15 R.H -** 942191N 354574N 354578NHYPVB20/29 L.H -** 942192N 354575N 354578NHYPVB20/29 R.H -** 942192N 354575N 354578N
(C.W- decrease)(C.C.W.- increase)
BACK-UP RING"O" RING
Control piston/assemblyValve plate
Maximum Stop
Compensator
Adj. Rod
Adapter Block
Maximum volume stop incorporates the "C" compensator with an djustable volume stop. The maximum pump delivery is externally adjusted.
-Level control- "M" control provides manual adjustment of pump flow. Level must be secured in position to maintain prespected flow.
-Handwhell control- Turning handwheel provides over- center control of pump output flow.
Rotation Level Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Shaft Rotation Pointer Position Outlet Port R.H 1 A R.H 2 B L.H 1 B L.H 2 A
Available in frame size HYPVB5 to HYPVB29
Neutral
Position 1 Position 2
Neutral
Position 1
Position 2
Available in frame size HYPVB5 to HYPVB15
Available in frame size HYPVB5 to HYPVB15
MODEL Max stop S/A No. Adj. Rod Adapter blockHYPVB5 /6 L.H -** 942188N 354573N 354578NHYPVB5 /6 R.H -** 942189N 354573N 354579NHYPVB10/15 L.H -** 942190N 354574N 354579NHYPVB10/15 R.H -** 942191N 354574N 354578NHYPVB20/29 L.H -** 942192N 354575N 354578NHYPVB20/29 R.H -** 942192N 354575N 354578N
(C.W- decrease)(C.C.W.- increase)
BACK-UP RING"O" RING
Control piston/assemblyValve plate
Maximum Stop
Compensator
Adj. Rod
Adapter Block
COntROL “M”
COntROL “H”
OPtIOnaL COntROLS
HY-PVB5/45VARiABLE DisPLACEmEnt PumPs
hydraut.com
10
SERVICE PaRtS InFORMatIOn
HY-PVB5/6VARiABLE DisPLACEmEnt PumPs
Bolt Torque 150-181 lb.in
• Optional side ports, thru-shaft available. • Optional compensator/controls available. • Optional maximum flow adjustment available. • Optional foot bracket
For satisfactory service life use full flow filtration to provide fluid which ISO cleanliness code 16/13.
notE
fiLtRAtion
hydraut.com
11
SERVICE PaRtS InFORMatIOn
HY-PVB10/15VARiABLE DisPLACEmEnt PumPs
Bolt Torque 150-181 lb.in
Optional side ports, thru-shaft available. Optional compensator/controls available. Optional maximum flow adjustment available. Optional foot bracket
For satisfactory service life use full flow filtration to provide fluid which ISO cleanliness code 16/13.
PINTLE
PINTLE BEARING
BEARING
CYLINDER BLOCK
PINPISTON
WASHERSHOEYOKE
SWASH PLATE
SHAFT
SQ. KEY
BEARING
HOUSING
SHAFT SEAL SPRING SHOE
PLATECONTROL PISTON
VALVE PLATE
COMPENSATOR
INCLUDE IN SEAL KIT INCLUDE IN ROTATING GROUP*
PART # DESCRIPTION938276N ROT GROUP PVB10938273N ROT GROUP PVB15239077N SW. PLATE942047N PISTON PVB10(9)941887N PISTON PVB15(9)275961N SHOE PLATE423324N SPHER. WASHER248812N PINS(3)321703N CYL BLOCK PVB10260860N CYL BLOCK PVB15241954N THRUST WASHER247294N SPRING CYL. BL.942158N C COMPENSATOR942159N CM COMPENSATOR 942480N CG COMPENSATOR924059N CVP COMPENSATOR
PART # DESCRIPTION058303N Y SHAFT KEY274382N RETAINER265425N PINTLE012016N PINTLE BEARING245223N LIFT LIMITER093509N RET. RING942327N Piston & Rod Ass.185638N RET. RING039465N PLATE BEARING942165N RH PLATE PVB10942166N LH PLATE PVB10942167N RH PLATE PVB15942168N LH PLATE PVB15
PART # DESCRIPTION919682N SEAL KIT343573N SEAL317162N GASKET244956N COMP. GASKET357652N HOUSING342743N YOKE278634N YOKE BIG SPRING317239N YOKE SM. SPRING120428N RET. RING OUT119982N RET. RING IN284397N BEARING SHAFT261478N SHAFT SHORT270369N SHAFT LONG942190N MAX STOP (CCW)942191N MAX STOP (CW)
***
notE
fiLtRAtion
hydraut.com
12
Bolt Torque 150 - 181 lb.in
Optional side ports, thru-shaft available. Optional compensator/controls available.
Optional maximum flow adjustment available. Optional foot bracket
For satisfactory service life use full flow filtration to provide fluid which ISO cleanliness code 16/13.
PINTLE
PINTLE BEARING
BEARING
CYLINDER BLOCK
PIN
PISTONWASHER
SHOEYOKE
SWASH PLATE
SHAFT
SQ. KEY
BEARING
HOUSING
SHAFT SEAL SPRING SHOE
PLATECONTROL PISTON
VALVE PLATE
COMPENSATOR
PART # DESCRIPTION938274N ROT GROUP PVB20938275N ROT GROUP PVB29239335N SW. PLATE941883N PISTON PVB20(9)941888N PISTON PVB29(9)248609N SHOE PLATE938392N SPHER. WASHER248836N PINS(3)250688N CYL BLOCK PVB20259458N CYL BLOCK PVB29238780N THRUST WASHER246386N SPRING CYL. BL.20263582N SPRING CYL. BL.29194878N RETAINER942192N MAX STOP
PART # DESCRIPTION919683N SEAL KIT295262N SEAL245976N GASKET244956N COMP. GASKET362029N HOUSING362028N YOKE294079N YOKE BIG SPRING245975N SEAT117506N RET. RING OUT117507N RET. RING IN283090N BEARING SHAFT362135N SHAFT 246353N SHAFT KEY388745N PINTLE
PART # DESCRIPTION353230N PINTLE BEARING36924N PINTLE PLUG244931N LIFT LIMITER194025N RET. RING379793N PISTON379792N PISTON ROD185638N RET. RING251108N PLATE BEARING942169N RH PLATE PVB20942170N LH PLATE PVB20942171N RH PLATE PVB29942172N LH PLATE PVB29942158N C COMPENSATOR942159N CM COMPENSATOR942480N CG COMPENSATOR924059N CVP COMPENSATOR
***
INCLUDE IN SEAL KIT INCLUDE IN ROTATING GROUP*
notE
fiLtRAtion
SERVICE PaRtS InFORMatIOn
HY-PVB20/29VARiABLE DisPLACEmEnt PumPs
hydraut.com
13
SERVICE PaRtS InFORMatIOn
HY-PVB45aVARiABLE DisPLACEmEnt PumPs
Bolt Torque 150 - 181 lb.in
Optional side ports, thru-shaft available. Optional compensator/controls available. Optional maximum flow adjustment available. Optional foot bracket
For satisfactory service life use full flow filtration to provide fluid which ISO cleanliness code 16/13.
PINTLE
PINTLE BEARING
BEARING
CYLINDER BLOCK
PIN
PISTONWASHER
SHOEYOKE
SWASH PLATE
SHAFT
SQ. KEY
BEARING
HOUSING
SHAFT SEAL SPRING SHOE
PLATECONTROL PISTON
VALVE PLATE
COMPENSATOR
PART # DESCRIPTION938074N ROT GROUP PVB45A 239335N SW. PLATE942284N PISTON PVB45A (9) 248609N SHOE PLATE938392N SPHER. WASHER248836N PINS(3)283501N CYL BLOCK PVB45A 238780N THRUST WASHER 263582N SPRING CYL. BL.194878N RETAINER942192N MAX STOP
PART # DESCRIPTION919683N SEAL KIT295262N SEAL245976N GASKET244956N COMP. GASKET362029N HOUSING387534N YOKE294079N YOKE BIG SPRING245975N SEAT117506N RET. RING OUT117507N RET. RING IN283090N BEARING SHAFT362135N SHAFT 246353N SHAFT KEY388745N PINTLE
PART # DESCRIPTION353230N PINTLE BEARING36924N PINTLE PLUG244931N LIFT LIMITER194025N RET. RING379793N PISTON379792N PISTON ROD185638N RET. RING251108N PLATE BEARING942285N RH PLATE PVB45A 942158N C COMPENSATOR942159N CM COMPENSATOR942480N CG COMPENSATOR924059N CVP COMPENSATOR
***
INCLUDE IN SEAL KIT INCLUDE IN ROTATING GROUP*
notE
fiLtRAtion
hydraut.com
14
hydraut.com