[email protected] PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz
Pipe Supports
PS1
Pipe Supports
PS2
[email protected] PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz
Pipe Supports
PS3
All products manufactured in accordance with ISO9001 Standard
2 Piece Clips
Part No: To Suit Outside Pipe Diameter (mm):
Width x Thickness(mm):
Mass(kg):
E2024 HDG 8 32 x 1.6 0.04
E2025 HDG 11 32 x 1.6 0.04
E2026 HDG 14 32 x 1.6 0.04
E2027 HDG 17 32 x 1.6 0.05
E2028 HDG 19 32 x 1.6 0.05
E2029 HDG 22 32 x 1.6 0.05
E2030 HDG 25 32 x 1.6 0.06
E2031 HDG 29 32 x 2.0 0.07
E2032 HDG 32 32 x 2.0 0.07
E2033 HDG 35 32 x 2.0 0.08
E2034 HDG 38 32 x 2.0 0.08
E2035 HDG 43 32 x 2.0 0.09
E2036 HDG 44 32 x 2.0 0.11
E2037 HDG 49 32 x 2.5 0.13
E2038 HDG 51 32 x 2.5 0.14
E2039 HDG 54 32 x 2.5 0.15
E2040 HDG 57 32 x 2.5 0.15
E2041 HDG 60 32 x 2.5 0.15
E2042 HDG 64 32 x 2.5 0.16
E2043 HDG 67 32 x 2.5 0.17
E2044 HDG 70 32 x 2.5 0.17
E2045 HDG 73 32 x 2.5 0.18
E2046 HDG 76 32 x 2.5 0.19
E2047 HDG 79 32 x 2.5 0.20
E2048 HDG 83 32 x 2.5 0.21
E2049 HDG 86 32 x 2.5 0.21
E2050 HDG 90 32 x 2.5 0.21
E2051 HDG 92 32 x 2.5 0.25
E2052 HDG 95 32 x 2.5 0.26
E2053 HDG 98 32 x 2.5 0.27
E2054 HDG 102 32 x 2.5 0.28
E2055 HDG 105 32 x 2.5 0.28
E2056 HDG 108 32 x 2.5 0.29
E2057 HDG 111 32 x 2.5 0.30
E2058 HDG 114 32 x 2.5 0.30
E2059 HDG 117 32 x 2.5 0.32
E2060 HDG 121 32 x 2.5 0.33
E2062 HDG 127 32 x 2.5 0.34
E2064 HDG 133 32 x 2.5 0.35
E2066 HDG 140 32 x 2.5 0.36
E2068 HDG 146 32 x 2.5 0.41
E2070 HDG 152 32 x 2.5 0.43
Custom sizes can be manufactured on request.
Pipe Supports
PS4
All products manufactured in accordance with ISO9001 Standard
Light Duty Saddles
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
Mass(kg):
EMC04-016 16 56 80 0.04
EMC04-019 19 59 83 0.04
EMC04-021 21 61 85 0.05
EMC04-025 25 65 89 0.06
EMC04-027 27 67 91 0.07
EMC04-032 32 72 96 0.07
EMC04-034 34 74 98 0.08
EMC04-038 38 78 102 0.08
EMC04-043 43 83 107 0.08
EMC04-048 48 88 112 0.09
EMC04-051 51 91 115 0.09
EMC04-060 60 100 124 0.12
EMC04-064 64 104 128 0.12
EMC04-073 73 113 137 0.14
EMC04-076 76 116 140 0.16
EMC04-089 89 129 153 0.18
EMC04-102 102 142 166 0.18
EMC04-114 114 154 178 0.20
EMC04-127 127 167 191 0.20
EMC04-140 140 180 204 0.21
EMC04-152 152 192 216 0.22
EMC04-165 165 205 229 0.24
Standard Finish: Hot Dipped GalvanisedMaterial: 25 x 3mmWorking Load: 0.75 kNSafety Factor: 2.5
Custom sizes can be manufactured on request.
[email protected] PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz
Pipe Supports
PS5
All products manufactured in accordance with ISO9001 Standard
Light Duty 2 Piece Clamps
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
C(mm):
Bolt Size(mm):
Mass(kg):
EMC06-019 19 59 83 6 M8 0.10
EMC06-021 21 61 85 6 M8 0.10
EMC06-025 25 65 89 6 M8 0.11
EMC06-027 27 67 91 6 M8 0.11
EMC06-032 32 72 96 6 M8 0.14
EMC06-034 34 74 98 6 M8 0.14
EMC06-038 38 78 102 6 M8 0.15
EMC06-043 43 83 107 6 M8 0.15
EMC06-048 48 88 112 6 M8 0.15
EMC06-051 51 91 115 6 M8 0.15
EMC06-060 60 100 124 6 M8 0.15
EMC06-064 64 104 128 6 M8 0.19
EMC06-073 73 113 137 6 M8 0.19
EMC06-076 76 116 140 6 M8 0.19
EMC06-089 89 129 153 6 M8 0.21
EMC06-102 102 142 166 6 M8 0.23
EMC06-114 114 154 178 6 M8 0.26
EMC06-127 127 167 191 6 M8 0.28
EMC06-140 140 180 204 6 M8 0.31
EMC06-152 152 192 216 6 M8 0.33
EMC06-165 165 205 229 6 M8 0.37
Custom sizes can be manufactured on request.
Standard Finish: Hot Dipped GalvanisedMaterial: 25 x 3mmWorking Load: 2.88 kNSafety Factor: 2.5
Pipe Supports
PS6
All products manufactured in accordance with ISO9001 Standard
Light Duty 2 Piece Yoke Clamps
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
C(mm):
Mass(kg):
EMC08-019 19 59 83 47 0.17
EMC08-021 21 61 85 47 0.17
EMC08-025 25 65 89 47 0.19
EMC08-027 27 67 91 47 0.19
EMC08-032 32 72 96 52 0.19
EMC08-034 34 74 98 54 0.20
EMC08-038 38 78 102 56 0.21
EMC08-043 43 83 107 60 0.21
EMC08-048 48 88 112 63 0.21
EMC08-051 51 91 115 65 0.21
EMC08-060 60 100 124 70 0.21
EMC08-064 64 104 128 72 0.26
EMC08-073 73 113 137 77 0.27
EMC08-076 76 116 140 79 0.28
EMC08-089 89 129 153 86 0.30
EMC08-102 102 142 166 93 0.31
EMC08-114 114 154 178 99 0.34
EMC08-127 127 167 191 105 0.37
EMC08-140 140 180 204 112 0.38
EMC08-152 152 192 216 118 0.41
EMC08-165 165 203 229 125 0.44
Standard Finish: Hot Dipped GalvanisedMaterial: 25 x 3mmWorking Load: 0.38 kNSafety Factor: 2.5
Custom sizes can be manufactured on request.
[email protected] PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz
Pipe Supports
PS7
All products manufactured in accordance with ISO9001 Standard
Single Piece Channel Clamps
Part No: DOutside Pipe Dia.
(mm):
A(mm):
Width x Thickness(mm):
Mass(kg):
EMC10-016 16 51 32 x 1.5 0.02
EMC10-017 17 52 32 x 1.5 0.02
EMC10-021 21 56 32 x 1.5 0.03
EMC10-025 25 60 32 x 1.5 0.04
EMC10-027 27 62 32 x 1.5 0.04
EMC10-032 32 67 32 x 1.5 0.04
EMC10-034 34 69 32 x 1.5 0.05
EMC10-038 38 73 32 x 1.5 0.05
EMC10-043 43 78 32 x 1.5 0.06
EMC10-048 48 83 32 x 1.5 0.06
EMC10-051 51 86 32 x 1.5 0.07
EMC10-060 60 95 32 x 1.5 0.14
EMC10-064 64 99 32 x 1.5 0.15
EMC10-076 76 111 32 x 1.5 0.18
EMC10-089 89 124 32 x 1.5 0.18
EMC10-102 102 137 32 x 1.5 0.20
EMC10-114 114 149 32 x 2.4 0.24
EMC10-140 140 175 32 x 2.4 0.28
EMC10-152 152 187 32 x 2.4 0.31
EMC10-165 165 200 32 x 2.4 0.34
Standard Finish: Hot Dipped GalvanisedWorking Load: 1.76 kNSafety Factor: 2.5
Custom sizes can be manufactured on request.
Pipe Supports
PS8
All products manufactured in accordance with ISO9001 Standard
U-Bolt Guide Supports
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
C(mm):
Mass(kg):
EMC14-021 21 65 50 31 0.09
EMC14-027 27 77 50 37 0.10
EMC14-034 34 85 50 44 0.12
EMC14-043 43 93 50 53 0.13
EMC14-048 48 100 50 58 0.14
EMC14-051 51 103 50 61 0.14
EMC14-060 60 110 50 70 0.16
EMC14-076 76 127 50 88 0.28
EMC14-089 89 140 50 101 0.30
EMC14-102 102 152 50 114 0.35
EMC14-114 114 165 50 126 0.38
EMC14-140 140 190 50 152 0.40
EMC14-165 165 215 50 177 0.44
EMC14-168 168 220 50 180 0.48
EMC14-219 219 295 75 235 1.13
EMC14-273 273 370 100 293 2.20
EMC14-324 324 420 100 344 2.52
EMC14-356 356 455 100 376 2.74
EMC14-406 406 505 100 426 3.05
EMC14-457 457 555 100 481 4.87
EMC14-508 508 605 100 532 5.32
Standard Finish: Hot Dipped Galvanised
Custom sizes can be manufactured on request.
[email protected] PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz
Pipe Supports
PS9
All products manufactured in accordance with ISO9001 Standard
Medium Duty Saddles
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
Width x Thickness(mm):
WorkingLoad(kN):
Mass(kg):
EMC15-021 21 75 115 40 x 5 2.46 0.14
EMC15-027 27 81 121 40 x 5 2.46 0.20
EMC15-034 34 88 128 40 x 5 2.46 0.28
EMC15-043 43 97 137 40 x 5 2.46 0.34
EMC15-048 48 102 142 40 x 5 2.46 0.34
EMC15-051 51 105 145 40 x 5 2.46 0.34
EMC15-060 60 114 154 40 x 5 2.46 0.40
EMC15-076 76 130 170 40 x 5 2.46 0.46
EMC15-089 89 143 183 40 x 5 2.46 0.54
EMC15-102 102 156 196 40 x 5 2.46 0.58
EMC15-114 114 170 210 40 x 6 3.57 0.65
EMC15-140 140 196 236 40 x 6 3.57 0.75
EMC15-165 165 221 261 50 x 6 4.44 1.25
EMC15-168 168 224 264 50 x 6 4.44 1.27
EMC15-203 203 259 299 50 x 6 4.44 1.48
EMC15-219 219 278 315 50 x 6 4.44 1.58
Standard Finish: Hot Dipped GalvanisedSafety Factor: 2.5
Custom sizes can be manufactured on request.
Pipe Supports
PS10
All products manufactured in accordance with ISO9001 Standard
Medium Duty 2 Piece Clamps
Part No: DOutside Pipe Dia.
(mm):
A(mm):
B(mm):
C(mm):
Width x Thickness(mm):
Mass(kg):
EMC16-060 60 114 154 M12 40 x 5 0.72
EMC16-076 76 130 170 M12 40 x 5 0.84
EMC16-089 89 143 183 M12 40 x 5 1.02
EMC16-102 102 156 196 M12 40 x 5 1.12
EMC16-114 114 170 210 M12 40 x 6 1.17
EMC16-127 127 181 221 M12 40 x 6 1.25
EMC16-140 140 194 234 M12 40 x 6 1.31
EMC16-152 152 206 246 M12 40 x 6 1.38
EMC16-165 165 219 259 M12 40 x 6 1.46
EMC16-178 178 232 272 M12 40 x 6 1.54
EMC16-190 190 244 284 M12 40 x 6 1.64
EMC16-203 203 257 297 M12 40 x 6 1.69
EMC16-219 219 273 313 M12 40 x 6 1.78
EMC16-230 230 284 324 M12 40 x 6 1.84
EMC16-240 240 294 334 M16 50 x 6 2.02
EMC16-252 252 304 344 M16 50 x 6 2.09
EMC16-273 273 327 367 M16 50 x 6 2.14
EMC16-324 324 378 418 M16 50 x 6 2.98
Standard Finis
