FIG 280 3-WAY PILLAR HYDRANT FIG 290 3-WAY PILLAR HYDRANT WITH LANDING VALVES FIG 260 2-WAY PILLAR HYDRANT WITH LANDING VALVES FIG 270 2-WAY PILLAR HYDRANT WITH LANDING VALVES FIG 250 2-WAY PILLAR HYDRANT GENERAL “AE” Pillar Hydrants are generally manufactured according to BS EN14384:2005 standard within a strict quality controlled environment to ISO 9001:2008. There are several models and configurations for the 2-Way and 3-Way pillar hydrant design. Model Fig.250 – 100mm x 2-Way with 65mm Male LVT Outlets. Model Fig.260 – 100mm x 2-Way with 65mm Oblique Landing Valves. Model Fig.270 – 100mm x 2-Way with 2 nos 65mm Oblique Landing Valves. Model Fig.280 – 150mm x 3-Way with 2 nos 65mm Male LVT Outlets and 1 no 125mm Male LVT Pumper outlet. Model Fig.290 – 150mm x 3-Way with 2 nos 65mm Oblique Landing Valves and 1 no 125mm Male LVT Pumper outlet. The outlets of the above models can be customised to suit other national standards and customer’s requirement. DESIGN AND TEST PRESSURES Design Pressure: 16 bars Service Test Pressure: 20 bars Factory Test Pressure: 25 bars FEATURES • Compact design. • Robust construction. • Easy operation. • Reliable performance with no maintenance required. HYDRANT INLET CONNECTION PN16 FF Flange. Other flange connection, eg., ANSI #150 FF etc., available upon request. PAINTING FINISHES Internal – Epoxy coated. External – Primer and RAL3000 “Red” finished coatings. MATERIALS Body: Speroidal Graphite Iron (SGI) Outlets: Copper alloy and/or LG2 Gunmetal Chain: Galvanised iron. PILLAR HYDRANTS

PILLAR HYDRANTS - Associated Enterprisesaespl.com.sg/wp-content/uploads/2017/12/Pillar-Hydrant-Data-Sheet.pdf“AE” Pillar Hydrants are generally manufactured according to BS EN14384:2005

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: PILLAR HYDRANTS - Associated Enterprisesaespl.com.sg/wp-content/uploads/2017/12/Pillar-Hydrant-Data-Sheet.pdf“AE” Pillar Hydrants are generally manufactured according to BS EN14384:2005

FIG 2803-WAY PILLAR HYDRANT

FIG 2903-WAY PILLAR HYDRANTWITH LANDING VALVES

FIG 2602-WAY PILLAR HYDRANT WITH LANDING VALVES

FIG 2702-WAY PILLAR HYDRANTWITH LANDING VALVES

FIG 2502-WAY PILLAR HYDRANT

GENERAL“AE” Pillar Hydrants are generally manufactured according to BS EN14384:2005 standard within a strict quality controlled environment to ISO 9001:2008.

There are several models and configurations for the 2-Way and 3-Way pillar hydrant design.

Model Fig.250 – 100mm x 2-Way with 65mm Male LVT Outlets.Model Fig.260 – 100mm x 2-Way with 65mm Oblique Landing Valves.Model Fig.270 – 100mm x 2-Way with 2 nos 65mm Oblique Landing Valves.Model Fig.280 – 150mm x 3-Way with 2 nos 65mm Male LVT Outlets and 1 no 125mm Male LVT Pumper outlet.Model Fig.290 – 150mm x 3-Way with 2 nos 65mm Oblique Landing Valves and 1 no 125mm Male LVT Pumper outlet.

The outlets of the above models can be customised to suit other national standards and customer’s requirement.

DESIGN AND TEST PRESSURESDesign Pressure: 16 barsService Test Pressure: 20 barsFactory Test Pressure: 25 bars

FEATURES• Compact design.• Robust construction.• Easy operation.• Reliable performance with no maintenance

required.

HYDRANT INLET CONNECTIONPN16 FF Flange. Other flange connection, eg., ANSI #150 FF etc., available upon request.

PAINTING FINISHESInternal – Epoxy coated.External – Primer and RAL3000 “Red” finished coatings.

MATERIALSBody: Speroidal Graphite Iron (SGI)Outlets: Copper alloy and/or LG2 GunmetalChain: Galvanised iron.

PILLAR HYDRANTS