SOILS &OILS

Heatbath has the

Fast-acting cleaners and de-rusters for steel;

cleaner you need! mild, non-etching cleaners for aluminum. Cleaners to remove quench oils, metalworking fluids, buffing compounds, rust. @

Heatbath

(413) 543m3381 CORPORATION d

Heatbath is industry’s #l choice for reliable, low-foaming cleaners for use after heat treating before electroplating and everywhere within the process where contaminants must be eliminated effectively and “environmentally!” Heatbath cleaners are engineered for immersion, electrolytic, or spray; liquid and powder.

Corporate Headquarters: P.O. Box 2978 Springfield, MA 01102 Iw

Fax: (413) 543-2378 Chicago * Detroit

Manufacturing and full laboratory in three strategic locations. Expert technical assistance

ovoiloble throughout North America

Circle 050 on reader information card

making them highly stable in aggres- sive alkaline or acid baths. The IOA-HF series of Optima anodes can be recoated again and again at a frac- tion of what it would cost to replace worn-out conventional anodes.

Circle 413 on the reader service card

ing solvent is the nonflammable direct replacement for l,l, 1-trichlorethane and other banned chlorinated solvents such as HCFC-141b. The company also offers a disposal program for their customers to permit the cost-effective disposal of spent EnSolv.

Circle 414 on the reader service card

Vapor Degreasing and Cleaning Solvent Enviro Tech International Inc. Me/rose Park, 111.

Molded Grating Fibergrate Corp. Dallas

Enviro Tech’s EnSolv N-propyl bro- Fibergrate Corp.‘s molded fiberglass mide-based vapor degreasing and clean- reinforced plastic grating, Micro-Mesh,

is designed and manufactured as a low- cost alternative to aluminum, steel, stain- less, steel, and other materials in appli- cation where corrosion-resistant underflow access and unobstructed air flow is required. The %-in. mesh size prevents small tools and other objects from falling through the grating. The 2 ft X 2 ft panels are available in three sur- face textures-smooth, meniscus, and gritted.

Circle 415 on the reader service card

Coating Thickness Measurement System Fischer Technology Inc. Windsor, Conn.

The Fischerscope MMS (Multi Measurement System) is a modular coating thickness measurement device. The modular design enables users to combine and configure different test methods to suit virtually any applica- tion. In all, 14 different combinations of test principles can be configured in the new unit. The Fischerscope MMS accepts a variety of probes including Fischer magnetic induction and eddy current probes, beta backscatter probes, and probes for measuring con- ductivity of nonferrous metals. All fu- ture Fischer probes will be compatible with the Fischerscope MMS.

Circle 416 on the reader service card

pH/ORP Analyzer GLI lnfernational Inc. Milwaukee

The Model P53 pI-I/ORP Analyzer, a compact, full-featured easy-to-use an- alyzer, can accept many different types of pWORP sensors: GLI Differential

94 METAL FINISHING . SEPTEMBER 1997

sensors, conventional electrode pairs, or standard combination electrodes. Its large backlit LCD displays the mea- sured pH, process temperatures, and two analog outputs. Each isolated an- alog outputs is 4 to 20 mA and 0 to 5 VDC/Ol mA. Up to four alarm control contacts are also provided.

Circle 417 on reader service card

Piping System George Fischer Inc. Tustin, Calif.

The +GF+ Fuseal II piping sys- tem’s flame-retardant compound yields a combination and high chemical resis- tance, toughness, and high strength at elevated temperatures. The system handles corrosive drainage fluids up to 212°F intermittently and pipe size di- mensions ranging from 195 to 12 in. The FU2000 power unit features auto- matic time control, voltage selection, and shutdown.

Circle 418 on reader service card

Ames can custom design your anodes with our extruding, casting and rolling techniques.

We specialize in fabrication of anodes for chromium plating, with an inventory of

antimoniai/lead and tin/lead sheet, wire and pipe products

4323 South Western Boulevard Chicago, Illinois 60609

Phone 773-523-3230 Fax 773-523-3654 Toll free outside IL l-600-255-6937

THE QUALITY NAME IN SOLDER, TIN AND LEAD PRODUCTS

Circle 006 on reader informatii card

Electronic Proportioner Grace Inc. Minneapolis

Grace’s new ProMix electronic pro- portioner correctly proportions, mixes, and applies two-component coatings including solvent or waterborne prim- ers, topcoats, and lacquers. The system features an easy-to-use icon-driven display panel that requires no special operator skills or training. The ProMix system delivers on-ratio material by maintaining predetined mix ratios to within 21%. If an off-ratio material

METAL FINISHING . SEPTEMBER 1997 95