Upload
trandiep
View
237
Download
5
Embed Size (px)
Citation preview
Page 1 of 48
Philippine Accreditation Bureau
SCOPE OF ACCREDITATION
Appendix No. APCB-1015-001 (Table 3) Rev. 2.
SGS Gulf Limited – Regional Operating Headquarters (ROHQ) 20th Floor, Citibank Tower 8741 Paseo de Roxas Makati City
has been accredited to PNS ISO/IEC 17065:2013 – Conformity assessment – Requirements for bodies certifying products, processes and services to provide product certification for the following scopes:
No. Product Description Test Standard Number and Description
Chemical Products Conformity assessment of goods to be exported in to Algeria, Burundi, Botswana, Ethiopia, Kenya, Mongolia, Niger, Nigeria, Qatar, Rwanda, Kingdom of Saudi Arabia, Tanzania, Uganda SGS Scheme Document Chemical Product Safety (Batch Certification) –System Type 1a SGS Scheme Document Chemical Product Safety (Product Registration –System Type 3 SGS Scheme Document Chemical Product Safety (Product Licensing) –System Type 5
1.
Chemicals for industrial and domestic purposes
EAS 31:2013 - Laundry soap specification
EAS 121:1999 – Water for lead acid batteries – Specification
EAS 122:1999 – Sulfuric acid – Specification
EAS 123:1999 - Distilled water — Specification
EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use
EAS 127-2:2014 - Synthetic detergent powders – Specification - Part 2: Machine wash
EAS 149:2000 – Carbon dioxide for beverage industry – Specification
EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
EAS 294:2001 - Scouring powder – Specification
EAS 295:2002 - Sodium hypochlorite solutions for domestic use – Specification
EAS 296:2011 - Liquid household hand dishwashing detergent – Specification
EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification
EAS 345:2004 – Toluene - Specification
EAS 361:2004 – Carbaryl dusting powders – Specification
EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
EAS 462:2007 – Shoe polish wax solvent paste type - Specification
EAS 787:2013 – Synthetic industrial detergent powder – Specification
EAS 788:2013 – Synthetic detergent paste – Specification
Page 2 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
EAS 789:2013 – Instant hand sanitizers – Specification
EAS 791:2013 – Oven cleaner and grease remover – Specification
EAS 792:2013 – Carpet and upholstery shampoo – Specification
EAS 793-1:2013 – Toilet cleansers – Specification – Part 1: Acidic liquid toilet cleansers
EAS 815:2014 – Soap noodles - Specification
EAS 816-1:2014 – Synthetic liquid laundry detergents – Specification – Part 1: Hand wash
EAS 816-2:2014 – Synthetic liquid laundry detergents – Specification – Part 2: Machine wash
EAS 817:2014 – Stain remover for tableware - Specification
KS 85:2007 (confirmed 2013) – Chemicals used for treatment of water intended for human consumption – Aluminium sulphate – Specification
KS 87:2012 - Hydrochloric acid- Specification
KS 155:2015 – Sodium carbonate for industrial use - Specification
KS 156:2014 - Caustic soda, analytical and technical – Specification
KS 221:1983 (confirmed 2016) – Specification for lime for chemical industry
KS 242:1980 (confirmed 2010) – Specification for sulphuric acid for use in lead-acid batteries
KS 315:1998 (confirmed 1999) - Specification for motor vehicle brake fluids
KS 375:2010 - Industrial liquid carbon dioxide – Specification
KS 382:2010 – Power alcohol - Specification
KS 400:1983 (confirmed 2015) – Specification for acetic acid
KS 591:2011 (confirmed 2017) - Denatured spirits - Specification
KS 647:2010 - Industrial oxygen - Specification
KS 648:2010 - Specification for acetylene gas
KS 653:2017 - Specification for household insecticidal aerosols
KS 654:2010 (confirmed 2015) - Mosquito coils – Specification
KS 807-2:2010 - Polishes - Specification - Part 2: Floor polish solvent type (Liquid and Paste)
KS 807-3:1996 (confirmed 2015) - Specification for polishes - Part 3: Floor polish water emulsion buffable type
KS 807-4:2010 - Polishes - Specification - Part 4: Floor polish, water emulsion self-shining type
KS 807-5:1997 - Specification for polishes - Part 5: Floor polish pigmented paste type
KS 807-6:1996 - Specification for polishes - Part 6: Automobile polish, wax solvent paste type
KS 807-7:1997 - Specification for polishes - Part 7: Wooden furniture polish paste
KS 807-8:1996 - Specification for polishes - Part 8: Automobile polish - liquid
KS 809-1:1988 (confirmed 2017) - Specification for toilet cleansers - Part 1: Powder toilet bowl cleanser
KS 809-3:2013 - Specification for toilet cleansers - Part 3: Alkaline and neutral liquids toilet cleansers
KS 914:2013 - Acetone for industrial use – Specification
KS 915:1990 (confirmed 2007) - Specification for anyhdrous lanolin for cosmetic industry
Page 3 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 927:2016 - Specification for disinfecting general purpose detergents
KS 929:2016 - Chemical disinfectants and antiseptics- Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas -Test method and requirements
KS 1180:2012 - Ethyl methyl ketone (butanone for industrial use) – Specification
KS 1181:2015 – Specification for methyl isobutyl ketone (4-Methyl penta-n-2-one)
KS 1182:1994 (confirmed 2017) – Specification for butyl alcohol (Butanol for industrial usa)
KS 1183:2013 - Isobutyl alcohol (2-methyl propan-1-ol) –Specification
KS 1184:2011 - Specification for isopropyl alcohol (propan-2-ol) for industrial use
KS 1275:1995 (confirmed 2017) - Specification for distempers
KS 1290-1:1999 (confirmed 2013) - Specification for bleaching agents - Part 1: Sodium hypochlorite solutions
KS 1290-2:1998 (confirmed 2010) - Specification for bleaching agents - Part 2: Sodium hypochlorite solution for water treatment
KS 1290-3:1998 (confirmed 2010) - Specification for bleaching agents - Part 3: Chlorinated lime bleaching powder for water treatment KS 1290-4:2007 (confirmed 2013) - Chemical used for treatment of water intended for human consumption - Part 4: Calcium hypochlorite
KS 1291:2013 - Specification for butyl acetate for industrial use
KS 1292:2015 - Specification for ethyl acetate for industrial use
KS 1293:2013 - Isobutyl acetate (methyl propyl acetate) for industrial use – Specification
KS 1294:2015 – Specification for isopropyl acetate for industrial use
KS 1295:1996 (confirmed 2013) - Diacetone alcohol for industrial use – Specification
KS 1296:2015 - Specification for ethyl glycol (2-ethoxyethanol) for industrial use
KS 1332-1:1996 (confirmed 2011) – Specification for photographic chemical – Part 1: Potassium bromide
KS 1332-4:1996 (confirmed 2011) – Specification for photographic chemical – Part 4: Photographic grade sodium bisulphate
KS 1332-6:1996 (confirmed 2011) – Specification for photographic chemical – Part 6: Photographic grade hydroquinone
KS 1332-7:1996 (confirmed 2011) – Specification for photographic chemical – Part 7; photographic potassium metabisulphite
KS 1406-1:1997 - Specification for carbaryl - Part 1: Technical grade
KS 1406-3:1997 (confirmed 2014) - Specification for carbaryl – Part 3: Water dispersible powders
KS 1407-1:1998 – (confirmed 2014) Specification for chlorpyrifos - Part 1: Technical grade
KS 1407-2:1998 (confirmed 2014) - Specification for chlorpyrifos emulsifiable concentrates
KS 1408-1:1998 (confirmed 2014) - Specification for technical grade - Part 1: Dimethoate
KS 1408-2:1998 (confirmed 2014) - Specification for Dimethoate emulsifiable concentrate
Page 4 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 1410-1:1998 (confirmed 2014) - Specification for Malathion - Part 1: Technical grade
KS 1410-2:1998 (confirmed 2014) - Specification for Malathion Emulsifiable Concentrates
KS 1410-3:1998 (confirmed 2014) - Specification for Malathion Dusting Powder
KS 1411-1:1998 (confirmed 2014) - Specification for Diazinon, Technical Grade
KS 1411-2:1998 (confirmed 2014) - Specification for Diazinon Emulsifiable Concentrates
KS 1443:1997 (confirmed 2017) - Specification for washing bars
KS 1455-1:1999 (confirmed 2017) - Specification for glass cleaner - Part 1: Liquid glass cleaner
KS 1508:1998 (confirmed 2011) – Specification for automotive multipurpose lithium soap greases
KS 1578-1:2010 (confirmed 2016) – Metal polishes – Specification – Part 1: ordinary liquid metal polishes
KS 1578-2:1999 (confirmed 2016) – Metal polishes – Part 2: Special metal polishes
KS 1695:2001 (confirmed 2013) - Specification for solvent-emulsion degreasers
KS 1696:2001 (confirmed 2013) - Specification for detergent for industrial dishwashing equipment
KS 1769-1:2005 (confirmed 2016) - Glycerine - Part 1: Soap lye crude glycerine - Specification
KS 1769-2:2005 (confirmed 2016) - Glycerine - Part 2: Saponification (hydrolyzer) crude glycerine - Specification
KS 1769-3:2005 (confirmed 2016) - Glycerine - Part 3: Analytical reagent (AR) glycerine - Specification
KS 1769-4:2005(confirmed 2016) - Glycerine - Part 4: Chemically pure (CP) glycerine - Specification
KS 1769-5:2005 (confirmed 2016) - Glycerine - Part 5: Industrial white (IW) glycerine – Specification
KS 1769-6:2005(confirmed 2016) - Glycerine - Part 6: Technical (TECH) glycerine - Specification
KS 1769-7:2005 (confirmed 2016) - Glycerine - Part 7: Dynamite grade (DYN) glycerine - Specification
KS 1796:2003 (confirmed 2010) - Specification for domestic chlorine based sterilizing fluids
KS 1797:2014 - Household fabric softeners - Specification
KS 1832:2005 - Stencil correcting fluid – Specification
KS 1918:2005 (confirmed 2017) – Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides – Specification
KS 1919:2005 (confirmed 2017) - Chemicals used for treatment of water intended for human consumption – Poly (diallyldimethylammonium chloride) \ {polyDADMAC} - Specification
KS 1920:2005 (confirmed 2017) – Chemicals used for treatment of water intended for human consumption – Cationic polyacrylamides – Specification
KS 1924:2007 (confirmed 2013) - Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulphate – Specification
KS 1932:2006 (confirmed 2017) – Sodium benzoate, food grade – Specification
KS 1940:2005 (confirmed 2017) - Chemicals used for treatment of water intended for human consumption (Polyamines) – Specification
Page 5 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 1941-1:2005 (confirmed 2017) - Scouring compounds - Part 1: Dishwashing paste - Specification
KS 1941-2:2005 (confirmed 2016) - Scouring compounds - Part 2: Antibacterial dishwashing paste – Specification
KS 2040:2008 (confirmed 2013) - Calcium chloride - Specification
KS 2041:2008 (confirmed 2013) - Ethanol for industrial use – Specification
KS 2117:2013 – Acidic detergents for ‘cleaning in-place’ in food and beverage industry – Specification
KS 2118:2014 – Sodium hypochlorite solution for use in food and beverage industry - Specification
KS 2119:2013 – Heavy-duty alkaline detergents for ‘cleaning-in-place’ in food and beverage
KS 2158:2008 (confirmed 2013) - Chemicals used for treatment of water intended for human consumption – Liquefied chlorine gas - Specification
KS 2159:2008 (confirmed 2013) - Chemicals used for treatment of water intended for human consumption – Chlorine dioxide – Specification
KS 2170-1:2009 (confirmed 2015) - Medical gases - Specification - Part 1: Medical oxygen
KS 2170-2:2008 (confirmed 2013) - Medical gases - Specification - Part 2: Medical air
KS 2170-3:2008 (confirmed 2013) - Medical gases - Specification - Part 3: Medical nitrous oxide
KS 2170-4:2009 (confirmed 2015) - Medical gases - Specification - Part 4: - Medical carbon dioxide
KS 2200-1:2009 (confirmed 2015) - Nitrogen - Specification - Part 1: High purity nitrogen
KS 2200-2:2009 (confirmed 2015) - Nitrogen - Specification - Part 2: Industrial Nitrogen
KS 2202-1:2009 (confirmed 2015) - Breathing gases for diving and hyperbaric applications - Specification - Part 1: Breathing oxygen
KS 2201:2009 (confirmed 2015) - Breathing oxygen for airborne application – Specification
KS 2203:2009 (confirmed 2015) - Compressed air for breathing apparatus - Specification
KS 2231:2016 - Antibacterial bathing bars – Specification
KS 2258:2010 (confirmed 2016) – Specification for water for lead-acid batteries
KS 2266-1:2011 - Argon – Specification – Part 1: Ultra high purity Argon
KS 2266-2:2011 – Argon – Specification – Part 2: High-purity argon
KS 2266-3:2011 – Specification for Argon – Part 3: Industrial Argon
KS 2267-1:2011 – Helium – Specification - Part 1: Ultra high purity helium
KS 2267-2:2011 – Helium – Specification -Part 2: High purity helium
KS 2272:2011 (confirmed 2017)- Nitric acid – Specification
KS 2340-1: 2011 – Hydrogen – Specification – Part 1: Industrial hydrogen
KS 2340-2:2011 – Hydrogen – Specification – Part 2: High purity hydrogen
KS 2341:2011 - Industrial Liquid chlorine- Specification
KS 2342-1:2011 - Liquid sulphur dioxide - Specification - Part 1: Technical grade liquid sulphur dioxide
KS 2342-2:2011 - Liquid sulphur dioxide - Specification – Part 2: Refrigeration grade liquid sulphur dioxide
KS 2350:2012 – Sodium silicate – Specification
KS 2413:2012 - High purity nitrous oxide - Specification
KS 2436:2013 - Formaldehyde Solution for Industrial Use - Specification
KS 2438:2013 - High purity compressed air-Specification
KS 2440:2013 - High purity oxygen- Specification
Page 6 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 2440:2013 - High purity oxygen- Specification
KS 2441:2013 – Ultra high purity oxygen - Specification
KS 2470:2013 - Hexane for industrial use- Specification
KS 2471:2013 - Methanol for industrial Use-Specification
KS 2472:2013 - Food grade hexane- Specification
KS 2501:2013 - Detergent- disinfectant liquid toilet Cleansers-Specification
KS 2502:2013 - Liquid oxygen based bleach for domestic use- Specification
KS 2518: 2014 - Buffer solutions – Specification
KS 2535:2014 – Melamine-formaldehyde resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water – Specification
KS 2564:2014 – Chemicals used for treatment of water intended for human consumption – Chemicals for emergency use – Trichloroisocyanuric acid – Specification
KS 2565:2014 – Chemicals used for treatment of swimming pool water – Trichloroisocyanuric acid - Specification
KS 2575:2015 - Alkaline drain cleaner/unblocking agent - Specification
KS 2587: 2015 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate
KS 2588: 2015 - Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous
KS 2589:2015 – Liquid drilling detergent/foam – Specification
KS 2671-1:2017 – Cockroach pesticide – Specification Part 1: Gel
KS EAS 31:2013 – Laundry soap – Specification
KS EAS 122:1999 (confirmed 2013) – Sulfuric acid – Specification
KS EAS 123:2006 (confirmed 2017) - Distilled water — Specification
KS EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use
KS EAS 127-2:2014 Synthetic detergent powders – Specification - Part 2: Machine wash
KS EAS 149:2000 – Carbon dioxide for beverage industry – Specification
KS EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
KS EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
KS EAS 294:2001 (confirmed 2017) - Scouring powder – Specification
KS EAS 295:2002 (confirmed 2016) - Sodium hypochlorite solutions for domestic use – Specification
KS EAS 296:2002 (confirmed 2017) - Liquid household hand dishwashing detergent – Specification
KS EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification
KS EAS 345:2004 (confirmed 2013) - Toluene- Specification
KS EAS 361:2004 – Carbaryl dusting powders – Specification
KS EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
KS EAS 462:2007 – Shoe polish wax solvent paste type – Specification
KS EAS 787:2013 – Synthetic industrial detergent powder – Specification
KS EAS 788:2013 – Synthetic detergent paste – Specification
KS EAS 789:2013 – Instant hand sanitizers – Specification
KS EAS 791:2013 – Oven cleaner and grease remover – Specification
KS EAS 792:2013 – Carpet and upholstery shampoo – Specification
Page 7 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
KS EAS 793-1:2013 – Toilet cleansers – Specification – Part 1: Acidic liquid toilet cleansers
KS EAS 815:2014 – Soap noodles - Specification
KS EAS 816-1:2014 – Synthetic liquid laundry detergents – Specification – Part 1: Hand wash
KS EAS 816-2:2014 – Synthetic liquid laundry detergents – Specification – Part 2: Machine wash
KS EAS 817:2014 – Stain remover for tableware – Specification
KS ISO 3696:1987 - Water for analytical laboratory use - Specification and test methods
KS ISO 5280:1979 - Industrial liquid carbon dioxide - Specification
KS ISO 6353-2:1983 - Reagents for chemical analysis - Part 2: Specifications - First series
KS ISO 6353-3:1987 - Reagents for chemical analysis - Part 3: Specifications - Second series
KS ISO 14687:1999 - Hydrogen fuel - Product specification
NB EAS 31:2013 - Laundry soap specification
NB EAS 121:1999 – Water for lead acid batteries – Specification
NB EAS 122:1999 – Sulfuric acid – Specification
NB EAS 123:1999 - Distilled water — Specification
NB EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use
NB EAS 127-2:2014 - Synthetic detergent powders – Specification - Part 2: Machine wash
NB EAS 149:2000 – Carbon dioxide for beverage industry – Specification
NB EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
NB EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
NB EAS 294:2001 - Scouring powder – Specification
NB EAS 295:2002 - Sodium hypochlorite solutions for domestic use – Specification
NB EAS 296:2011 - Liquid household hand dishwashing detergent – Specification
NB EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification
NB EAS 345:2004 – Toluene - Specification
NB EAS 361:2004 – Carbaryl dusting powders – Specification
NB EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
NB EAS 462:2007 – Shoe polish wax solvent paste type - Specification
TZS 36:2014 / EAS 31:2013 – Soap – Laundry – Specification
TZS 38:1979 - Soap – Laundry powder – Specification
TZS 39-1:2014/EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use
TZS 60:1979 - Mosquito coils – Specification
TZS 74:1980 - Sulphuric acid – Specification
TZS 75:1980 - Water for lead acid batteries – Specification
TZS 216:1984 - Gaseous carbon dioxide (technical grade) – Specification
TZS 217:1984 - Gaseous oxygen (technical grade) – Specification
TZS 218:1984 - Gaseous nitrogen (technical grade) – Specification
TZS 219:1984 - Sodium silicate for industrial use – Specification
Page 8 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
TZS 221:1984 - Soap – Carbolic – Specification
TZS 222:1984 - Soap – Soft – Specification
TZS 223:2014/EAS 787:2013 – Synthetic industrial detergent powder – Specification
TZS 225:1984 - Powders – Scouring – Specification
TZS 270:1986 - Pyrethrins – Space spray – Specification
TZS 369:2002 - Sodium hypochlorite solutions – Specification
TZS 378:1989 - Specification for sodium hydroxide (Pure, Technical & Analytical)
TZS 507:1999 - Sodium bicarbonate – Specification
TZS 581:2014/EAS 296:2011 - Liquid household hand dishwashing detergent – Specification
TZS 582:2001 – Solid compound fo cleaning toilet bowls – Specification
TZS 583-1:2014-EAS 793-1:2013 – Toilet cleanser – Specification – part 1: Acidic liquid
TZS 586: 2001 - Lime (quick lime and hydrated) - Chemical industries – Specification
TZS 624:2014/EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
TZS 667:2014 – Motor vehicle brake fluids - Specification
TZS 784:2004 – Chemicals used for treatment of water intended for human consumption – Sodium hyplochlorite
TZS 785:2008 – Calcium hypochlorite used for disinfection of water intended for human consumption – Specification
TZS 789:2008 – Drinking (potable) water - Specification
TZS 801:2004 – Disinfectants - Specification
TZS 1198:2015 – Chemically pure (CP) glycerine – Specification
TZS 1408:2011 - Cationic polyacrylamides for treatment of water intended for human consumption – Specification
TZS 1409:2011 - Polyamines for treatment of water intended for human consumption –Specification
TZS 1410:2011 – Chemicals used for treatment of water intended for human consumption – Anionic and non-ionic polyacrylamides - Specification
TZS 1649:2014/EAS 788:2013 – Synthetic detergent paste – Specification
TZS 1650:2014/EAS 789:2013 – Instant hand sanitizers – Specification
TZS 1651:2014/EAS 791:2013 – Oven cleaner and grease remover – Specification
TZS 1652:2014/EAS 792:2013 – Carpet and upholstery shampoo – Specification
TZS 1696-2:2014/EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
TZS 1696-3:2014/EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
Page 9 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
US 216-1:2000 - Carbon dioxide for use in manufacture of beverages - Part 1: Specifications
US 289:2001 - Specification for limestone for chemical industries
US 291:2000 - Specification for Lime (Quicklime and Hydrated Lime) for Chemical Industries
US 308:2001 – Standard specification for insecticide for treatment of mosquito nets
US 363:2006 - Household insecticidal aerosols — Specification
US 572:2006 - Sodium Carbonate – Specification
US 573:2006 Wax Shoe polish – Specification
US 575:2006 Polish paste for floor and wooden furniture – Specification
US 653:2006 Disinfectants – Quaternary ammonium based –Specification
US 925:2012 – Chemicals used for treatment of water intended for human consumption – Sodium hypochlorite – Specification
US 926:2012 - Chemicals used for treatment of water intended for human consumption – Polyamides – Specification
US 1511:2014 – Oxygen for medical use – Specification
US 1565:2014 – Standard Specification for water emulsion floor polish
US 1625:2015 – Acid based instant hand sanitizers - Specification
US EAS 31:2013 - Laundry soap specification
US EAS 121:2006 – Water for lead acid batteries - Specification
US EAS 122:1999 – Sulfuric acid – Specification
US EAS 123:2006 - Distilled water — Specification
US EAS 127-1: 2013 - Synthetic detergent powders – Specification – Part 1: Household hand use
US EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
US EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
US EAS 294:2001 - Scouring powder – Specification
US EAS 295:2002 - Sodium hypochlorite solutions for domestic use – Specification
US EAS 296:2011 - Liquid household hand dishwashing detergent - Specification
US EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification
US EAS 345:2004 – Toluene - Specification
US EAS 361:2004 – Carbaryl dusting powders – Specification
US EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
US EAS 787:2013 – Synthetic industrial detergent powder – Specification
US EAS 788:2013 – Synthetic detergent paste – Specification
US EAS 789:2013 – Instant hand sanitizers - Specification
US EAS 791:2013 – Oven cleaner and grease remover - Specification
US EAS 792:2013 – Carpet and upholstery shampoo – Specification
US EAS 793-1:2013 – Toilet cleansers – Specification – Part 1: Acidic liquid toilet cleansers
Page 10 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
CES 42:2013 – Laundry soap – Specification
CES 43:2013 – Carbolic soap – Specification
CES 105:2013 – Synthetic laundry detergent powders for household use – Specification
CES 120:2013 – Laundry detergent bars for household use – Specification
CES 121:2013 – Liquid household hand dishwashing detergent – Specification
SASO 84:2010 - Liquefied petroleum gases (LPG) for household use (mixture of commercial propane and butane)
SASO 213:1994/ GSO-1084:2002 - Carbon dioxide for industrial purposes
SASO 243:1991 – Oxygen for industrial purposes
SASO 392:2004 - Regulations for pesticides.
SASO 510:2006 - Synthetic Detergents-Synthetic powered detergents for household use.
SASO 554:1989 - Chlorofluorocarbons for industrial use-chlorofluorocarbons 11,12, 22,114
SASO 647:1994 – Fire extinguishing dry chemical powder - Multipurpose phosphate
SASO 796:1998 - Water for lead-acid batteries
SASO 828:1994 (GSO 461:1994) - Carpet cleaner liquid
SASO 846:1994 - Sulfuric acid.
SASO 850:1994 - Liquid ammonia
SASO 852:1994 - Sodium Hydroxide.
SASO 869:1994 – Hydrochloric acid, types 1, 2, 3.
SASO 895:1994 - Liquid chlorine.
SASO 924:1994 - Dissolved acetylene.
SASO 930:1994 - Oxygen for medical purposes
SASO 940:1998 - Ethanol for industrial use
SASO 993:1998 - Carbon dioxide used for medical purposes
SASO 995:1998 - Ethylene Glycol Concentrate and its Engine Coolants.
SASO 1052:1998 - Roll of glass fibre felt coated with bitumen.
SASO 1054:2009 - Sodium hypochlorite solution
SASO 1057:2009 - Alkali drain cleaner
SASO 1184:1998 - Phenolic disinfectant fluids
SASO 1195:1998 - liquid class cleaner.
SASO 1198:1998 - Ethylene for industrial purposes
SASO 1200:1998 - Methanol for industrial use
SASO 1202:1998 - Toluene For Industrial And Commercial Purposes.
SASO 1326:1998 - Aerosol air freshener
SASO 1382:1998 - Sodium bicarbonate
SASO 1385:1998 - Black and white liquid disinfectants
SASO 1403:1998- Formaldehyde for industrial purposes
SASO 1405:1998 - Refined Phenol For Industrial Purposes
SASO 1506:1999 - Propylene industrial purposes
SASO 1508:1999 - Nitrous oxide gas used for medical purposes
SASO 1510:1999 - Sodium carbonate (soda ash) for industrial purposes.
SASO 1722:2000 - Alkaline and neutral grades of glass sodium silicate and their solutions.
SASO 1724:2000 - Phosphoric acid for industrial use
Page 11 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
SASO 1754:2000 - Aluminium oxide used for industrial purposes - Aluminium oxide powder for use as an insulating coating or as an ingredient of ceramic mixtures for components of electronic devices
SASO 1786:2000 - Crude, Chemically pure and technical glycerine.
SASO 1949:2001 - Emulsified asphalt.
SASO 1956:2001 - Shoe polish.
SASO 2065:2009 - Synthetic Detergents for Kitchen
SASO 2067:2002 - Powdered Hand Cleaner (soap with borax)
SASO 2068:2002 - Solvent cement used for joining unplasticized pvc pipe and fitting
SASO 2106:2002 – sulphur
SASO 2160:2003 - Asphalt - base emulsion for use as protective coatings for metal
SASO 2270:2004 - Acrylic, polyester, and mixed acrylic- polyester resin based solid surface material - sheet products
SASO 2332:2005 - Stain Remover for Tableware
SASO 2616:2006 - laundry powdered soaps
SASO 2618:2009 - detergent,germicidal,general purpose,liquid
SASO 2665:2007 - Chemicals used for treatment of water intended for human consumption – Calcium carbonate
SASO 2666:2007 - Chemicals used for treatment of water intended for human consumption – Half-burnt dolomite
SASO 2709:2007 - Chemicals used for treatment of water intended for human consumption - High-calcium
SASO 2711:2007 - Chemicals used for treatment of water intended for human consumption - Sodium hydroxide
SASO 2713:2007 - Chemicals used for treatment of water intended for human consumption - Potassium permanganate
SASO 2764:2008 – Perfuming pills for toilets
SASO 2775:2009 - Chemicals used for treatment of water intended for human consumption - Ammonia solution
SASO 2819:2012 - Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate
SASO 2820:2011 - Chemicals used for treatment of swimming pool water – Sodium carbonate
SASO 2821:2011 - Chemicals used for treatment of water intended for human consumption - Carbon dioxide
SASO 2822:2011 - Chemicals used for treatment of water intended for human consumption - Chlorine
SASO GSO 1897:2015 - Clothes Liquid Softeners
SASO GSO 2006:2010 - Specification for Industrial Nitrogen
SASO GSO 2008:2010 - Acetic Acid for Industrial Use
SASO GSO 2013:2010 - Washing Brighteners
SASO GSO 2014:2010 - Domestic cookware coating materials
SASO GSO 2065:2011 – Acetone for industrial use
SASO GSO 2067:2011 – Butanol for industrial use
SASO GSO 2077:2011 - Coloured textiles detergent
SASO GSO 2238:2012 - Liquid detergents for dishwashing
SASO GSO ASTM C494:2015 Standard Specification for Chemical Admixtures for Concrete
SASO ISO 5280:1998 - Xylene for industrial use.
Page 12 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
NIS 04:2010 - Specification for toilet soap
NIS 05: 2010 - Specification for Hard Laundry Soap
NIS 48:1974 - Specification for enamelware for household use
NIS 119: 1981 - Specification for Distilled Water Suitable for Lead Acid Batteries used in Motorised Vehicle
NIS 131:1980 - Specification for water for laboratory use
NIS 137:1982 - Standard for sodium hydroxide (Technical grudges)
NIS 150: 1982 - Specification for Bleaching Solution for Domestic use
NIS 241: 1988 - Standard Specifications for Aluminum Sulphate
NIS 272:1989 - Specification for industrial benzene
NIS 286:1992 – Specification for mosquito coils
NIS 288: 1992 - Specifications for Concentrated Sulphuric Acid
NIS 376:2013 - Standard for Synthetic Detergent Powder for Laundry Purposes
NIS 380:1997 - Specification for sodium silicate
NIS 425: 2000 - Specification for Household Aerosol Insecticides & Performance Requirement for Filled & Unfilled Aerosol Insecticides Dispenser
NIS 517: 2006 - Standard for Laundry Bar
NIS 519: 2013 - Standard for Liquid Detergent for Household Hand Dish Washing
NIS 521: 2006 - Standard for Ethanol (Industrial Grade)
NIS 568:2008 - Standard for Quaternary Compounds (QACs) based Aromatic disinfectants fluids
NIS 569:2008 - Standard for aromatic disinfectant Fluids
NIS 722:2008 - Standard for black and white disinfectant fluid
ASTM C1031-11 (2016) - Standard Specification for Nuclear-Grade Aluminum Oxide Powder
ASTM C1184-14 – Standard specification for structural silicone sealants
ASTM C494/C494M-16 Standard Specification for Chemical Admixtures for Concrete
ASTM D98-15 – Standard specification for calcium chloride
ASTM D304-11 – Standard specification for butyl alcohol (Butanol)
ASTM D329-07(2013) – Standard specification for acetone 1,2
ASTM D330-07(2013) – Standard specification for 2-butoxyethanol 1,2
ASTM D632-12 – Standard specification for sodium chloride
ASTM D740-11 – Standard specification for methyl ethyl ketone 1,2
ASTM D770-11 – Standard specification for isopropyl alcohol 1,2
ASTM D928-03(2017) – Standard specification for sodium bicarbonate
ASTM D1152-06(2012) – Standard specification for methanol (methyl alcohol)
ASTM D1153-12 – Standard specification for methyl isobutyl ketone 1,2
ASTM D1786-16 – Standard specification for toluene diisocyanate
ASTM D1836-07(2013) – Standard specification for commercial hexanes
ASTM D2190-07(2013) – Standard specification for vinyl acetate
ASTM D2378-07(2012) – Standard specification for formaldehyde 50% grade uninhibited and 37% grade inhibited and uninhibited
ASTM D2827-13 – Standard specification for styrene monomer
ASTM D3130-11 – Standard specification for n-propyl acetate (96% grade)
Page 13 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
ASTM D3620-04(2009) - Standard Specification for Glacial Acetic Acid
ASTM D3622-11 – Standard specification for 1-propanol (n-propyl alcohol)
ASTM D4078-02(2015) – Standard specification for water emulsion floor polish
ASTM D4081-16 – Standard specification for drycleaning-grade perchloroethylene
ASTM D4416-09 – Standard specification for acrylic acid
ASTM D4614-11 – Standard specification for ethyl acetate (all grades)
ASTM D4615-12 – Standard specification for n-butyl acetate (all grades)
ASTM D4652-05(2015) – Standard specification for silicone fluid used for electrical insulation
ASTM D4701-00(2015) – Standard specification for technical grade methylene chloride
ASTM D4835-08(2012) – Standard specification for propylene glycol monomethyl ether acetate
ASTM D4837-07(2012) – Standard specification for propylene glycol monomethyl ether
ASTM D5164-02(2011) – Standard specification for propylene glycol and dipropylene glycol
ASTM D5211-16 - Standard Specification for Xylenes for p-Xylene Feedstock
ASTM D5237-14 – Standard guide for evaluating fabric softeners
ASTM D5396-04(2015) – Standard specification for reclaimed perchloroethylene 1,2
ASTM D5871-16 – Standard specification for benzene for cyclohexane feedstock
ASTM D7124-16 - Standard Specification for Benzene for Use with Zeolite Based Catalysts
ASTM E1220-16 – Standard specification for liquid chlorine
ASTM E1229-16 – Standard specification for calcium hypochlorite
ISO 418:2001 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium sulphite
ISO 420:1994 (confirmed in 2016)- Photography -- Processing chemicals -- Specifications for potassium bromide
ISO 422:1994 (confirmed in 2016)- Photography -- Processing chemicals -- Specifications for p-methyl aminophenol sulphate
ISO 423:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for hydroquinone
ISO 424:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
ISO 817:2014 - Refrigerants -- Designation and safety classification
ISO 2456:1986 (confirmed in 2017) - Surface active agents -- Water used as a solvent for tests -- Specification and test methods
ISO 3298:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for glacial acetic acid
ISO 3299:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for 1-phenyl-3-pyrazolidinone
ISO 3617:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for sodium hydroxide
ISO 3618:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for benzotriazole
ISO 3619:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for ammonium thiosulfate solution
ISO 3620:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for aluminium potassium sulphate
Page 14 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
ISO 3621:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for sodium tetraborate decahydrate
ISO 3622:1996 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for ammonium thiocyanate
ISO 3623:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous potassium carbonate
ISO 3624:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium ferricyanide
ISO 3625:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium hydroxide
ISO 3626:1996 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium thiocyanate
ISO 3627:2001 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium metabisulfite
ISO 3628:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for boric acid, granular
ISO 3629:2000 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium metabisulfite
ISO 3943:1993 (confirmed in 2015) - Photography -- Processing chemicals -- Specifications for anhydrous sodium acetate
ISO 3696:1987 (confirmed in 2011) - Water for analytical laboratory use -- Specification and test methods
ISO 5272:1979 (confirmed in 2012) - Toluene for industrial use – Specifications
ISO 5280:1979 (confirmed in 2012) - Xylene for industrial use – Specification
ISO 5990:2000 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium sulfite, 650 g/l solution
ISO 6353-2:1983 (confirmed in 2012) - Reagents for chemical analysis -- Part 2: Specifications -- First series
ISO 6353-3:1987 (confirmed in 2012) - Reagents for chemical analysis -- Part 3: Specifications -- Second series
ISO 10636:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
ISO 17531:2002 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for 4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
ISO 17584:2005 (confirmed in 2014) - Refrigerant properties
EC Regulation No.1907:2006 - EU Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
EU Directive 67/548/EEC Classification, Labelling and Risk Assessment of Chemicals
ES 3642:2005 – Labelling of chemical products
ES 6910:2015 – Labelling of detergents and cleaning products
Page 15 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
EAS 64:2000 - Groundnut (peanut) oil for cosmetic industry – Specification
EAS 65: 2000 - Coconut oil for cosmetic industry — Specification
EAS 86:2000 - Sesame (simsim) oil for cosmetic industry – Specification
KS 796:1992 (confirmed 2017) - Specification for mineral oil for cosmetics industry
KS 797:1989 (confirmed 2016) – Specification for sesame (simsim) oil for cosmetic industry
KS 798:1989 (confirmed 2016) – Specification for groundnut (peanut) oil for cosmetic industry
KS 799:1989 (confirmed 2016) - Specification for castor oil for cosmetic industry
KS 800:1989 (confirmed 2016) - Specification for coconut oil for cosmetic industry
KS 1765:2003 (confirmed 2011) - Specification for avocado oil for cosmetic industry
KS EAS 64:2000 (confirmed 2017) - Groundnut (peanut) oil for cosmetic industry - Specification
KS EAS 86:2000 (confirmed 2016) - Sesame (simsim) oil for cosmetic industry - Specification
KS ISO 590:1981 (confirmed 2014) – Oils of Brazilian sassafras
KS ISO 770:1980 (confirmed 2017) - Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
KS ISO 855:1981 (confirmed 2014) - Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
KS ISO 856:1981 (confirmed 2014) - Oil of peppermint (Mentha x piperita L.)
KS ISO 1342:1988 (confirmed 2014) - Essential oil of rosemary (Rosmarinus officinalis L.)
KS ISO 3043:1975 (confirmed 2014) – Oil of pimento berry
KS ISO 3044:1997 (confirmed 2014) - Oil of eucalyptus citriodora Hook.
KS ISO 3053:2004 (confirmed 2015) - Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
KS ISO 3054:1987 (confirmed 2014) - Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
KS ISO 3061:2008 (confirmed 2015) - Oil of black pepper (Piper nigrum L.)
KS ISO 3063:2004 (confirmed 2015) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
KS ISO 3064:1977 (confirmed 2014) - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)
KS ISO 3065:1974 (confirmed 2014) - Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineol
KS ISO 3525:1979 - Oil of amyris (Amyris balsamifera L.)
KS ISO 3475:1975 (confirmed 2015) - Oil of aniseed (Pimpinella anisum L.)
KS ISO 3523:1976 (confirmed 2017) - Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla)
KS ISO 3524:1977 (confirmed 2017) - Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)
KS ISO 3033-1:2005 (confirmed 2015) - Oil of spearmint -- Part 1: Native type (Mentha spicata L.) KS ISO 3061:2008 (confirmed 2015) - Oil of black pepper (Piper nigrum L.) KS ISO 3063:2004 (confirmed 2015) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
Page 16 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
KS ISO 3064:1977 (confirmed 2014) - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)
KS ISO 3760:1979 (confirmed 2017)- Oil of celery seed (Apium graveolens L.)
KS ISO 3848:2001 (confirmed 2017) - Oil of citronella, Java type
KS ISO 3849:1981 (confirmed 2017) - Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.)
KS ISO 3140:2005 (confirmed 2015) - Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel
KS ISO 3141:1997 (confirmed 2017) - Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3142:1997 (confirmed 2017) - Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3143:1997 (confirmed 2017) - Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3214:2000 (confirmed 2015) - Oil of Litsea cubeba (Litsea cubeba Pers.)
KS ISO 3217:1974 (confirmed 2017) - Oil of lemongrass (Cymbopogon citratus)
KS ISO 3515:2002 (confirmed 2015) - Oil of lavender (Lavandula angustifolia Mill.)
KS ISO 3516:1997 (confirmed 2017) - Oil of coriander fruits (Coriandrum sativum L.
KS ISO 3517:1975 (confirmed 2017) - Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
KS ISO 3518:2002 (confirmed 2015) - Oil of sandalwood (Santalum album L.)
KS ISO 3519:2005 (confirmed 2015) - Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle)
KS ISO 3520:1998 (confirmed 2017) - Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
KS ISO 3526:1991 (confirmed 2017) - Oil of sage, Spanish (Salvia lavandulifolia Vahl)
KS ISO 3527:2000 (confirmed 2017) - Oil of parsley fruits (Petroselinum sativum Hoffm.)
KS ISO 3528:1997 (confirmed 2017) - Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
KS ISO 3714:1981 – Oil of pennyroyal
KS ISO 3756:1976 (confirmed 2017) - Oil of cubeb
KS ISO 3757:1978 (confirmed 2017) - Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
KS ISO 3761:1997 (confirmed 2017) - Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)
KS ISO 3809:1987 (confirmed 2017) - Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means
KS ISO 4716:1987 (confirmed 2017) - Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash]
KS ISO 4718:1981 (confirmed 2017) - Oil of lemongrass [Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson]
KS ISO 4719:1999 (confirmed 2017) - Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type
KS ISO 4724:1984 (confirmed 2017) - Oil of cedarwood, Virginian (Juniperus virginiana L.)
KS ISO 4725:1976 (confirmed 2017) - Oil of cedarwood, Texas (Juniperus mexicana Schiede)
KS ISO 4727:1988 (confirmed 2017) - Oil of palmarosa (Cymbopogon martinii (Roxburgh) W. Watson var. motia)
Page 17 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
NB EAS 64:2000 - Groundnut (peanut) oil for cosmetic industry – Specification
NB EAS 65: 2000 - Coconut oil for cosmetic industry — Specification
NB EAS 86:2000 - Sesame (simsim) oil for cosmetic industry – Specification
SASO 585-2001 - Regulations for perfumery products based on ethanol.
SASO 1526-2005 - Paraffinic mineral base oils
SASO 1780-2000 - White mineral oils (paraffinic) for medical purposes
SASO ISO TR 210:2001 - Essential oils- general rules for packaging conditioning and storage.
SASO ISO TR 211:2001 - Essential oils- general rules for labeling and marking of containers.
SASO ISO 875:2014 - Essential oils - evaluation of miscibility in ethanol
ISO 770:2002 (confirmed in 2012) - Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
ISO 855:2003 (confirmed in 2014) - Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
ISO 856:2006 (confirmed in 2015) - Oil of peppermint (Mentha x piperita L.)
ISO 875:1999 (confirmed in 2015) - Essential oils -- Evaluation of miscibility in ethanol
ISO 1342:2012 - Essential oil of rosemary (Rosmarinus officinalis L.)
ISO 3033-1:2005 (confirmed in 2015) - Oil of spearmint -- Part 1: Native type (Mentha spicata L.)
ISO 3033-2:2005 (confirmed in 2015) - Oil of spearmint -- Part 2: Chinese type (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil
ISO 3033-4:2005 (confirmed in 2015) - Oil of spearmint -- Part 4: Scotch variety (Mentha x gracilis Sole)
ISO 3044:1997 (confirmed in 2012) - Oil of eucalyptus citriodora Hook.
ISO 3045:2004 (confirmed in 2012) - Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
ISO 3053:2004 (confirmed in 2012) - Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
ISO 3054:2017 - Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
ISO 3061:2008 (confirmed in 2016) - Oil of black pepper (Piper nigrum L.)
ISO 3063:2004 (confirmed in 2012) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
ISO 3064:2015 - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.))
ISO 3065:2011 (confirmed 2017) - Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
ISO 3140:2011 (confirmed 2017) - Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel
ISO 3141:1997 (confirmed in 2012) - Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3142:1997 (confirmed in 2012) - Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3143:1997 (confirmed in 2012) - Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3214:2000 (confirmed in 2016) - Oil of Litsea cubeba (Litsea cubeba Pers.)
ISO 3215:1998 (confirmed in 2015) - Oil of nutmeg, Indonesian type (Myristica fragrans Houtt.)
ISO 3216:1997 (confirmed in 2012) - Oil of cassia, Chinese type (Cinnamomum aromaticum Nees, syn. Cinnamomum cassia Nees ex Blume)
Page 18 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
ISO 3217:1974 (confirmed in 2016) - Oil of lemongrass (Cymbopogon citratus)
ISO 3475:2002 (confirmed in 2012) - Oil of aniseed (Pimpinella anisum L.)
ISO 3515:2002 (confirmed in 2012) - Oil of lavender (Lavandula angustifolia Mill.)
ISO 3516:1997 (confirmed in 2012) - Oil of coriander fruits (Coriandrum sativum L.)
ISO 3517:2012 - Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
ISO 3518:2002 (confirmed in 2012) - Oil of sandalwood (Santalum album L.)
ISO 3519:2005 (confirmed in 2014) - Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle)
ISO 3520:1998 (confirmed in 2015) - Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
ISO 3523:2002 (confirmed in 2012) - Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla)
ISO 3524:2003 (confirmed in 2014) - Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)
ISO 3525:2008 (confirmed in 2011) - Oil of amyris (Amyris balsamifera L.)
ISO 3526:2005 (confirmed in 2015) - Oil of sage, Spanish (Salvia lavandulifolia Vahl)
ISO 3527:2016 - Oil of parsley fruits (Petroselinum sativum Hoffm.)
ISO 3528:2012 - Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
ISO 3756:1976 (confirmed 2017) - Oil of cubeb
ISO 3757:2002 (confirmed in 2012) - Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
ISO 3760:2002 (confirmed in 2012) - Oil of celery seed (Apium graveolens L.)
ISO 3761:2005 (confirmed in 2014) - Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)
ISO 3809:2004 (confirmed in 2012) - Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means
ISO 3848:2016 - Oil of citronella, Java type
ISO 3849:2003 (confirmed 2015) - Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.)
ISO 4716:2013 - Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash]
ISO 4718:2004 (confirmed in 2012) - Oil of lemongrass [Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson]
ISO 4719:2012 - Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type
ISO 4724:2004 (confirmed in 2012) - Oil of cedarwood, Virginian (Juniperus virginiana L.)
ISO 4725:2004 (confirmed in 2012) - Oil of cedarwood, Texas (Juniperus mexicana Schiede)
ISO 4727:1988 (confirmed in 2014) - Oil of palmarosa (Cymbopogon martinii (Roxburgh) W. Watson var. motia)
ISO 4728:2003 (confirmed in 2015) - Oil of Spanish wild marjoram (Thymus mastichina L.)
ISO 4729:1984 (confirmed in 2015) - Oil of pimento leaf (Pimenta dioica (Linnaeus) Merrill)
ISO 4730:2004 (confirmed in 2012) - Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
Page 19 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
ISO 4731:2012 - Essential oil of geranium (Pelargonium x ssp.)
ISO 4733:2004 (confirmed in 2012) - Oil of cardamom [Elettaria cardamomum (L.) Maton]
ISO 8896:2016 - Oil of caraway (Carum carvi Linnaeus)
ISO 8897:2010 (confirmed in 2015) - (Confirmed in 2015) - Oil of juniper berry (Juniperus communis L.)
ISO 8898:2003 (confirmed in 2014) - Oil of mandarin petitgrain (Citrus reticulata Blanco)
ISO 8899:2003 (confirmed in 2014) - Oil of lemon petitgrain [Citrus limon (L.) Burm. F.]
ISO 8900:2005 (confirmed in 2014) - Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]
ISO 8901:2003 (confirmed in 2015) - Oil of bitter orange petitgrain, cultivated (Citrus aurantium L.)
ISO 8902:2009 (confirmed in 2014) - Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
ISO 9301:2003 (confirmed in 2015) - Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
ISO 9776:1999 (confirmed in 2015) - Oil of Mentha arvensis, partially dementholized (Mentha arvensis L. var. piperascens Malinv. and var. glabrata Holmes)
ISO 9841:2013 - Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
ISO 9842:2003 (confirmed in 2015) - Oil of rose (Rosa x damascena Miller)
ISO 9843:2002 (confirmed in 2012) - Oil of cedarwood, Chinese type (Cupressus funebris Endlicher)
ISO 9844:2006 (confirmed in 2015) - Oil of bitter orange (Citrus aurantium L.)
ISO 9909:1997 (confirmed in 2012) - Oil of Dalmatian sage (Salvia officinalis L.)
ISO 10115:2013 - Essential oil of tarragon (Artemisia dracunculus L.)
ISO 10624:1998 (confirmed in 2015) - Oil of elemi (Canarium luzonicum Miq.)
ISO 10869:2010 (confirmed in 2016) - Oil of fir needle, Siberian (Abies sibirica Ledeb.)
ISO 11016:1999 (confirmed in 2015) - Oil of star anise, Chinese type (Illicium verum Hook. f.)
ISO 11019:1998 (confirmed in 2015) - Oil of roots of lovage (Levisticum officinale Koch)
ISO 11020:1998 (confirmed in 2015) - Oil of turpentine, Iberian type (Pinus pinaster Sol.)
ISO 11043:1998 (confirmed in 2015) - Oil of basil, methyl chavicol type (Ocimum basilicum L.)
ISO 14715:2010 (confirmed in 2015) - Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]
ISO 14716:1998 (confirmed in 2015) - Oil of galbanum (Ferula galbaniflua Boiss. et Buhse)
ISO 14717:2008 (confirmed in 2011) - Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.]
ISO 16385:2014 - Essential oil of molle (Schinus areira L.), Argentinean type
ISO 16928:2014 - Essential oil of ginger [Zingiber officinale Roscoe]
ISO 17382:2007 (confirmed in 2016) - Oil of magnolia flower, China type (Michelia x alba DC)
ISO 17412:2007 (confirmed in 2011) - Oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare)
ISO 19332:2007 (confirmed in 2017) - Oil of blue chamomile (Chamomilla recutita (L.) Rauschert syn. Matricaria chamomilla auct.)
ISO 21093:2003 (confirmed in 2014) - Oil of dwarf pine (Pinus mugo Turra)
ISO 21389:2004 (confirmed in 2012) - Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
Page 20 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
ISO 21390:2005 (confirmed in 2014) - Oil of wintergreen, China (Gaultheria yunnanensis (Franch.) Rehd.), redistilled
ISO 22769:2009 (confirmed in 2015) - Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.)
ISO 23954:2009 (confirmed in 2015) - Oil of lime expressed, Persian type (Citrus latifolia Tanaka)
ISO 25157:2013 - Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa)
3. Cosmetic and Toiletries
EAS 126:1999 – Pure petroleum jelly for cosmetic industry - Specification
EAS 186: 2013 - Toilet soap – Specification
EAS 335:2013 – Cologne – Specification
EAS 336:2013 - Chemical Depilatories – Specification
EAS 337:2013 - Specification for Henna powder
EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
EAS 339:2013 - Hair creams, lotions and gels - Specification
EAS 340:2013 – Nail polish – Specification
EAS 341:2013 - Nail polish removers – Specification
EAS 342:2013 - Pomades and brilliantines – Specification
EAS 346:2013 – Labelling of cosmetics – General requirements
EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
EAS 766-1:2013 – Antibacterial toilet soap – Specification – Part 1: Solid
EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 1: Liquid
EAS 786:2013 - Skin care creams, lotions and gels – Specification
EAS 790:2013 – Liquid soap – Specification
EAS 812-1:2014 – Liquid hand wash – Specification - Part 1: Synthetic and combined (soap and synthetic) hand wash
KS 44-2:2005 (confirmed 2017) - Toilet soaps - Specification - Part 2: Baby soaps
KS 386:1982 (confirmed 2017) - Specification for carbolic toilet soap
KS 576:2006 (confirmed 2017) - Hair shampoo, soap-based - Specification
KS 577:2006 - Hair shampoo, synthetic detergent-based - Specification
KS 580:2014 - Cosmetic creams, lotions and gels for skin care - Specification
KS 581:1998 (confirmed 2007) - Specification for pure petroleum jelly for human use
KS 602:1999 (confirmed 2007) - Specification for hair oils
KS 793:1999 (confirmed 2007) - Specification for liquid oxidation hair dyes, aryl di-amine-based
KS 803-1:1988 (confirmed 2017) - Specification for liquid soaps - Part 1: Toilet soap
KS 803-2:1988 (confirmed 2017) - Specification for liquid soaps - Part 2: Liquid floor soap
KS 803-3:1988 (confirmed 2017) - Specification for liquid soaps - Part 3: Lotion soap
Page 21 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
KS 805:1988 (confirmed 2017) - Specification for a waterless hand cleaner
KS 916-1:2012 - Shaving preparations - Specification - Part 1: Shaving creams
KS 917-1:2000 (confirmed 2009) - Specification for after-shave preparations - Part 1: Lotions
KS 920:1991 - Specification for batching oil
KS 1473:1998 (confirmed 2007) - Specification for lipstick
KS 1526-1:2003 (confirmed 2012) - Manual toothbrush - Specification - Part 1: Conventional reusable type
KS 1526-2:2005 - Manual toothbrush - Specification - Part 2: Single-use toothbrush
KS 1527:2001 (confirmed 2012) - Specification for mouthwash preparations
KS 1569:2001 (confirmed 2007) - Specification for cosmetic pencils
KS 1570-1:2001 (confirmed 2016) - Specification for skin powders - Part 1: Body face powders
KS 1570-2:2007 (confirmed 2016) - Skin powders - Specification - Part 2: Baby powders
KS 1669:2001 (confirmed 2007) - Specification for cosmetic and air freshener aerosols
KS 1764:2012 - Specification for roll-on deodorants and antiperspirants
KS 1766:2006 - Specification for body oils
KS 1767-1:2006 (confirmed 2016) - Bath preparations - Specification - Part 1: Foam baths and shower gels
KS 1768:2003 (confirmed 2017) - Talc for cosmetic industry - Specification
KS 1795:2003 (confirmed 2017) - Neem herbal soap - Specification
KS 1921:2005 (confirmed 2017) - Gel soap - Specification
KS 1942:2016 - Bathing bars - Specification
KS 2115:2007 (confirmed 2017) - Soap powder or chips – Specification
KS 2408:2012 – Soap starch – Specification
KS EAS 126:1999 (confirmed 2017) – Pure petroleum jelly for cosmetic industry – Specification KS EAS 186: 2013 - Toilet soap – Specification
KS EAS 187:2000 - Standard specification for toothpaste
KS EAS 335:2013 – Cologne – Specification
KS EAS 336:2013 - Chemical Depilatories – Specification
KS EAS 337:2013 - Specification for Henna powder
KS EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification KS EAS 339:2013 - Hair creams, lotions and gels - Specification
KS EAS 340:2013 – Nail polish – Specification
KS EAS 341:2013 - Nail polish removers – Specification
KS EAS 342:2013 - Pomades and brilliantines – Specification
KS EAS 346:2013 – Labelling of cosmetics – General requirements
KS EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
KS EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
KS EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
KS EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
Page 22 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
KS EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
KS EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
KS EAS 766-1:2013 - Antibacterial toilet soap – Specification – Part 1: Solid
KS EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 1: Liquid
KS EAS 790:2013 – Liquid soap - Specification
KS EAS 812-1:2014 – Liquid hand wash – Specification - Part 1: Synthetic and combined (soap and synthetic) hand wash
NB EAS 126:1999 – Pure petroleum jelly for cosmetic industry - Specification
NB EAS 186: 2013 - Toilet soap – Specification
NB EAS 187:2000 - Standard specification for toothpaste
NB EAS 335:2013 – Cologne – Specification
NB EAS 336:2013 - Chemical Depilatories – Specification
NB EAS 337:2013 - Specification for Henna powder
NB EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
NB EAS 339:2013 - Hair creams, lotions and gels - Specification
NB EAS 340:2013 – Nail polish – Specification
NB EAS 341:2013 - Nail polish removers – Specification
NB EAS 342:2013 - Pomades and brilliantines – Specification
NB EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
NB EAS 339:2013 - Hair creams, lotions and gels - Specification
NB EAS 340:2013 – Nail polish – Specification
NB EAS 341:2013 - Nail polish removers – Specification
NB EAS 342:2013 - Pomades and brilliantines – Specification
NB EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
TZS 37:2014/EAS 186: 2013 - Toilet soap – Specification
TZS 72: 2014 - Toothpaste – Specification
TZS 220:2014/EAS 790:2013 – Liquid soap – Specification
TZS 313:2014 / EAS 786:2013 - Cosmetic creams, lotions and gels for skin care – Specification
TZS 316: 2002 - Shampoo, soap based – Specification
TZS 317: 2002 - Shampoo, synthetic – Detergent base – Specification
TZS 318 (Part 1): 1999 For cosmetic industry – Petroleum jelly Specification
TZS 318 (Part 2): 1999 Marketed petroleum – Jelly products ready for use as body ointment – Specification
TZS 638-1:2014 / EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
TZS 638-2:2006 / EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
TZS 638-3:2014 / EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
TZS 638-4:2014 EAS 377-4:2013 – List of raw materials for cosmetic industry – Dyes, Pigments and Colour Additives Recognized as Safe (GRA)
TZS 638-5:2014 / EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
Page 23 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
TZS 775:2014 / EAS 338:2013– Chemical hair relaxers and hair waving products - Specification
TZS 811:2004 – Cosmetics and air freshener aerosols - Specification
TZS 812:2004 – Cosmetic pencils - Specification
TZS 813:2014/EAS 337:2013 – Henna powder – Specification
TZS 840:2015 – Skin powder - Specification
TZS 879:2006 – Liquid toilet soap – Specification
TZS 880:2014/EAS 336:2013 - Chemical Depilatories – Specification
TZS 881:2014/EAS 335:2013 – Cologne – Specification
TZS 882:2014/EAS 339:2013 - Hair creams, lotions and gels - Specification
TZS 883:2008 – Neem herbal soap - Specification
TZS 884:2014/EAS 342:2013 - Pomades and brilliantines – Specification
TZS 894:2008 – Jatropha herbal sopa – Specification
TZS 914:2006 – Cotton baby napkins — Specification
TZS 1009:2008 – Herbal soap – Specification
TZS 1133:2010 – Skin care oils – Specification
TZS 1134:2010 – Hair oil – Specification
TZS 1428:2011 – Setting lotion - Specification
TZS 1647-1:2014/EAS 766-1:2013 – Antibacterial toilet soap – Specification – Part 1: Solid
TZS 1647-2:2014/EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 1: Liquid
TZS 1687:2014/EAS 340:2013 – Nail polish – Specification
TZS 1688:2014/EAS 341:2013 - Nail polish removers – Specification
TZS 1689-1:2014/EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
US 189:2000/EAS 187:2000 - Standard specification for toothpaste
US 191:2007 - Petroleum jelly for cosmetic industry — Specification
US 488:2003 Skin powders - Specification - Part 2: Baby powders
US 637:2006 Bathing bars – Specification
US 638:2006 Household washing bars – Specification
US 875:2009 - Lipstick – Specification
US 1623-1:2015 – Hair dyes – Liquid oxidation hair dyes – Part : Aryl di-amine based – Specification
US 1624-1:2015 – Hair shampoo – Part 1: Synthetic detergent-based - Specification
US EAS 186: 2013 - Toilet soap – Specification
US EAS 335:2013 – Cologne - Specification
US EAS 336:2013 - Chemical Depilatories – Specification
US EAS 337:2013 - Specification for Henna powder
US EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
US EAS 339:2013 - Hair creams, lotions and gels - Specification
US EAS 340:2013 – Nail polish - Specification
US EAS 341:2013 - Nail polish removers – Specification
US EAS 342:2013 - Pomades and brilliantines – Specification
US EAS 346:2013 – Labelling of cosmetics – General requirements
US EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
US EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
Page 24 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
US EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
US EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
US EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
US EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
US EAS 766-1:2013 – Antibacterial toilet soap – Specification – Part 1: Solid
US EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 2: Liquid
US EAS 786:2013 - Skin care creams, lotions and gels – Specification
US EAS 790:2013 – Liquid soap – Specification
CES 44:2013 – Toilet soap – Specification
CES 123:2013 – bathing bars – Specification
SASO 723:1994 - Cosmetic Products-Substances added to cosmetic products - Colouring substances.
SASO 725:2010 - Cosmetic products -Hair shampoo
SASO 777:2009 - Cosmetic Products - Oxidation Hair Dyes, Liquid, Gel and Cream – Specification
SASO 802:1998 - Cosmetic products-toothpaste.
SASO 1187:1998 – Soap flakes
SASO 1196:1998 - Shaving soap
SASO 1387:1998 - Shaving cream
SASO 1512:2010 - Skin creams
SASO 1514:1999 - Hair cream
SASO 1557:1999 – Edible essential water – rose water – flower water
SASO 1744:2000 - Cosmetic products - Chemical depilatories.
SASO 1750:2000 - Talcum powder
SASO 1788:2000 - Cosmetic products - Hair oils
SASO 1794:2000 -Cosmetic products - deodorants
SASO 1871:2009 - Cosmetics-Lip sticks
SASO 1873:2009 - Hand wash liquid soap
SASO 1958:2001 - Toilet deodorants.
SASO 2017:2010 - Wet wipes
SASO 2186:2009 - Cosmetic Products - Nail polish (Nail Enamel) – Specification
SASO 2614:2010 - Cosmetics -Toiletries - Industrial hand cleaners (petroleum solvent type)
SASO 2767:2009 - Glycerine Soap Transparent and Non-transparent
SASO 2807:2010 – Cosmetics – Hair fixative
SASO 2823:2011- Cosmetic products - Henna
SASO GSO 1786:2014 - Toilet soaps
SASO GSO 1846:2011 - Cosmetic products – alkohl
SASO GSO 1895:2009 - Toilet soap for children
SASO GSO 1942:2010 - Transparent soap
SASO GSO 1943:2009 - Cosmetic products – Safety Regulations
SASO ISO 22715:2008 – Cosmetics – Packaging and labelling
GSO 2302:2013 – Face mask
GSO 2236:2012 – Cosmetics – Face and eye make-up remover
GSO 2237:2012 – Cosmetics – Sunscreen products
GSO ISO 22715:2008 – Cosmetics – Packaging and labelling
Page 25 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
NIS 09:1973 – Standard for nylon toothbrushes
NIS 125:2006 - Standard for Toothpaste
NIS 305:2004 - Standard for Shampoo
NIS 371:1997 - Standard for Petroleum Jellies
NIS 495:2004 - Standard for Nail Polishing Products
NIS 497:2004 - Standard for Hair Relaxer
NIS 503:2004 - Standard for Hair Cream
NIS 514:2006 – Standard for Black Soap
NIS 515:2010 – Standard for Medicated Soap
NIS 516:2006 – Standard for Toilet Bar
NIS 518:2006 - Standard for Oral Hygiene Products – Oral Rinses
NIS 520:2006 - Standard for Herbal and Herbs Bio-Salt Tooth-Paste
NIS 571:2013 - Standard for Shea butter (unrefined)
NIS 675:2009 - Standard for baby hair shampoo
NIS 676:2009 - Standard for Hair shampoo
NIS 677:2009 - Standard for baby skin powders
NIS 678:2009 - Standard for skin powders
NIS 680:2009 - Standard for Hair conditioner creams
NIS 681:2009 - Standard for Skin creams
NIS 518:2006 - Standard for Oral Hygiene Products – Oral Rinses
NIS 520:2006 - Standard for Herbal and Herbs Bio-Salt Tooth-Paste
NIS 571:2013 - Standard for Shea butter (unrefined)
NIS 675:2009 - Standard for baby hair shampoo
NIS 676:2009 - Standard for Hair shampoo
NIS 677:2009 - Standard for baby skin powders
NIS 678:2009 - Standard for skin powders
NIS 680:2009 - Standard for Hair conditioner creams
NIS 681:2009 - Standard for Skin creams
ISO 11609:2017 – Dentistry – Dentifrices – Requirements, test methods and marking
ISO 16408:2015 – Dentistry – Oral care products – Oral rinses
ISO 22715:2006 (confirmed 2016) – Cosmetics – Packaging and labelling
ISO 28158:2010 (confirmed 2015)– Dentistry – Integrated dental floss and handles
EC-EU 1223:2009 - Regulation on Cosmetic Products
Page 26 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
4. Inks, Printing Inks
KS 517-1:2014 – Ball point pens – Specification Part 1: General use
KS 518:2005 (confirmed 2017) - Fountain pen inks - Specification
KS 810:2013 - Specification for printing inks for use on food wrappers, packages and receptacles (Includes Amendment Slip No 1:2005)
KS 1222:1992 (confirmed 2011) - Specification for ink paste-black (Stencil, duplicating-machine)
KS 1799-1:2003 (confirmed 2014) - Indelible ink - Specification - Part 1: Indelible ink for use on marking voters' fingers
KS 1799-2:2004 (confirmed 2014) - Indelible ink - Specification - Part 2: Indelible ink for use on marking textile fabrics
KS 1800:2003 (confirmed 2014) - Black finger printing ink - Specification
KS 1801-1:2003 (confirmed 2014) - Waterproof drawing ink - Specification - Part 1: Black waterproof drawing ink for architectural, engineering and survey use
KS 1801-2:2003 (confirmed 2014) - Waterproof drawing ink - Specification - Part 2: Coloured waterproof drawing ink for architectural, engineering and survey use
KS 1805:2004 (confirmed 2014) - Gallic acid for use in the ink industry – Specification
KS 1806:2004 (confirmed 2014)- Tannic acid for use in the ink industry - Specification
KS 1807:2005 (confirmed 2017) - Numbering ink - Specification
KS 1830:2005 (confirmed 2017) - Black metal stamp ink – Specification
KS 1832:2005 - Stencil correcting fluid – Specification
KS 1833:2006 (confirmed 2012) - Dyes for water-based writing inks – Specification
KS 1934:2006 (confirmed 2017)- Specification for Black Web Offset Ink
KS 1935:2005 (confirmed 2011) - Stamp pad ink - Specification
KS 1936-1:2005 (confirmed 2017) – Black letterpress ink - Specification - Part 1: Black letterpress ink for general purposes
KS 1993:2014 – Marking pens for text highlighting – Specification
KS 1998:2014 – Marking pens for writing and drawing – Specification
KS 2381:2013 - Two-tone security ink (TTSI) - Specification
TZS 71:1980 – Ball point pen ink – Specification
TZS 420-1:2010 - Ball point pens and refills -- Part 1: General use
TZS 421:1989 - Ball point pen refills – Specification
SASO 2643:2006 - Record inks - Specification for blue-black inks
SASO GSO 2243:2012 - Record inks - Specification for permanent inks
NIS 39:2009 - Standard for ballpoint pen ink
NIS 299:1993 - Standard for printing inks for numbering
NIS 679:2009 - Standard for indelible inks
ISO 12757-1:2016 - Ball point pens and refills -- Part 1: General use
ISO 12757-2:1998 (confirmed 2015) - Ball point pens and refills -- Part 2: Documentary use (DOC)
ISO 14145-1:2016 – Roller ball pens and refills – Part 1: General use
ISO 14145-2:1998 (confirmed 2015) - Roller ball pens and refills – Part 2: Documentary use (DOC)
ISO 27668-2:2009 (confirmed 2015) – Gel ink pens and refills – Part 2: Documentary use (DOC)
Page 27 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
5. Lubricants, Industrial Oils and related products
EAS 159:2000 – Engine oils - Specification
KS EAS 159:2000 – Engine oils - Specification
KS 1507:1999 (confirmed 2016) – Specification for multipurpose automotive gear lubricant (extreme pressure gear oil)
KS ISO 6743-1:2002 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
KS ISO 6743-2:1981 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)
KS ISO 6743-3A:1987 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)
KS ISO 6743-3B:1988 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Gas and refrigeration compressors)
KS ISO 6743-4:1999- Lubricants, industrial oils and related products (class L) -- Classification – Part 4: Family H (Hydraulic systems)
KS ISO 6743-5:1988 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)
KS ISO 6743-6:1990 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)
KS ISO 6743-7:1986 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)
KS ISO 6743-8:1987- Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)
KS ISO 6743-9:2003 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)
KS ISO 6743-10:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)
KS ISO 6743-11:1990 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)
KS ISO 6743-12:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
KS ISO 6743-13:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
KS ISO 6743-14:1994 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)
KS ISO 6743-15:2000 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
KS ISO 6743-99:2002 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
KS ISO 11158:1997 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH, HL, HM, HV and HG
KS ISO 12922:1999 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
KS ISO 15380:2002 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
NB EAS 159:2000 – Engine oils - Specification
US 249:1999 / EAS 159 – Engine oils – Specification
US ISO 6743-15:2007 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
Page 28 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
5. Lubricants, Industrial Oils and related products
ZNS 51:2014- Multipurpose automotive gear lubricant (EP) – Specification
SASO 405:1995 - Brake fluids for road vehicles
SASO 844:1994 - Diesel oil
SASO 1182:1998 - Classification of Industrial Gear Lubricants (Family C).
SASO 1380:1998 - Classification of Industrial Lubricants for Hydraulic System (H L)
SASO 1524:1999 - H L P Hydraulic Oils
SASO 1525:1999 - H V L P Hydraulic Oils
SASO 1527:1999 - Classification and Specifications of automotive greases
SASO 1530:2003 - Gear lubricating oils
SASO 1728:2010 - Automatic Transmission Fluid
SASO 1729:2000 - Lubricating oils for air compressors and vacuum pumps
SASO 1732:2000 - C L P Lubricating oils used in circular and splash lubrication systems
SASO 1775:2000 - Lubricants for Refrigerant Compressors
SASO 1781:2010 - Mineral lubricating oils used in steam or gas turbines
SASO 1782:2000 - C L Lubricating oils used in circulating lubrication systems
SASO 1842:2001 - Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel bare conductors.
SASO 1869:2001 - Lubricating oils for two - stroke engines
SASO 1950:2001 - Heat-treating oils (Quenching oils).
SASO 2059:2002 - Water - Soluble Cutting Oil
SASO GSO 1785:2013 - Lubricating oils for internal combustion engines
SASO GSO 2196:2012 - Gulf guide of standard specification for unleaded gasoline
NIS 213: 2004 - Specifications for Minerals Base Oil
NIS 370: 2006 - Standards for Motor Vehicle Engine Lubricating Oil
NIS 372: 2006 - Standard for Motor Vehicle Lubricating Oil
NIS 373: 1997 - Standard for Industrial Gear Lubricating Oil
NIS 374: 2004 - Standard for Hydraulic Oil
NIS 533: 2006 - Specification for two-stroke Engine Oil
TZS 647: 2014 - Engine oils – Minimum performance – Specification
TZS 798:2004 – Automotive service greases - Specification
TZS 1691:2014 - Automatic Transmission Fluids (ATF) based on road vehicles - Specification
TZS 1695:2014/EAS 290-2:2002 - Automatic Transmission Fluids (ATF) based on road vehicles – Specification
ISO 6743-1:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
ISO 6743-2:1981 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)
ISO 6743-3:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)
ISO 6743-4:2015- Lubricants, industrial oils and related products (class L) -- Classification – Part 4: Family H (Hydraulic systems)
ISO 6743-5:2006 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)
ISO 6743-6:1990 (confirmed in 2011) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)
Page 29 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
5. Lubricants, Industrial Oils and related products
ISO 6743-7:1986 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)
ISO 6743-8:1987 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)
ISO 6743-9:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)
ISO 6743-10:1989 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)
ISO 6743-11:1990 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)
ISO 6743-12:1989 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
ISO 6743-13:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
ISO 6743-14:1994 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)
ISO 6743-15:2007 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
ISO 6743-99:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
ISO 8068:2006 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines
ISO 12924:2010 (confirmed in 2016) - Lubricants, industrial oils and related products (Class L) -- Family X (Greases) – Specification
ISO 12925-1:1996 (confirmed in 2013) - Lubricants, industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems
ISO/TS 12927:1999 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications
ISO/TS 12928:1999 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
ISO 13738:2011 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
ISO 15380:2016 - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
ISO 19378:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications
ISO 24254:2007 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family E (internal combustion engine oils) -- Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
ISO 10050:2005 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
ISO 11158:2009 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH, HL, HM, HV and HG
ISO 12922:2012 - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
Page 30 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
6.
Waxes, bituminous materials and other petroleum products
KS 682:1982 (confirmed 1999) - Specification for oxidized (Brown) Bitumen adhesive for roofing purposes
KS 1762:2002 - Specification for industrial bitumens
KS 1239:1996 - Specification for cutback bitumen for roads
KS 624:1986 - Specification for bitumen roofing felts
KS 769:1990 (confirmed 1999) - Specification for bitumen road emulsions (anionic and cationic)
KS 1265:2009 (confirmed 2015) - Specification for paraffin wax candles for illuminating purposes
KS 1426:1997 (confirmed 2015) - Specification for paraffin wax
KS 1427:1997 (confirmed 2016) - Specification for microcrystalline wax of petroleum origin
KS 1454:1997 (confirmed 2015) - Specification for shoe cream
KS 2489:2013 – Engine coolant - Specification
US 762:2007 – Illuminating candles — Specification
SASO 1389:1998 - Vaseline c petroleum jelly
SASO 1792:2000 - Non-buffable floor polish liquid
SASO 1933:2001 - Petroleum waxes
SASO 2167:2002 - Automobile polishing wax
SASO 2334:2005 - Floor paste wax
SASO 2701:2007 - Nitrocellulose pastes
NIS 24:1979 - Nigerian standard on paraffin wax candles
NIS 29:1995 - Specification for galvanized steel bucket for general use
NIS 171:1983 – Specification for bitumen for road purposes
NIS 211: 1985 - Specification for Bitumen Road Emulsion (Anionic and Cationic)
NIS 271: 2007 - Specifications for Petroleum Waxes
NIS 523: 2006 - Standard for Bitumen for Industrial Purposes
NIS 524: 2006 - Standard for Bituminous Roofing Felt
NIS 526: 2006 - Specifications for Bitumen Road Emulsion (Anionic and Cationic)
7. Fuels
EAS 158: 2012 - Automotive gasoline, premium motor spirit — Specification
EAS 177: 2012 - Automotive gas oil (automotive diesel) — Specification
KS 91:1985 (confirmed 2015) - Specification for liquefied petroleum gases (LPG)
KS 1289:1996 (confirmed 2015) - Specification for illuminating kerosene
KS EAS 158: 2012 - Automotive gasoline, premium motor spirit — Specification
KS EAS 177: 2012 - Automotive gas oil (automotive diesel) — Specification
KS ISO 17225-1:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 1: General requirements
KS ISO 17225-2:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 2: Graded wood pellets
KS ISO 17225-3:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 3: Graded wood briquettes
KS ISO 17225-4:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 4: Graded wood chips
KS ISO 17225-5:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 5: Graded firewood
KS ISO 17225-6:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 6: Graded non-woody pellets
KS ISO 17225-7:2014 (Adopted 2016) - Solid biofuels -- Fuel specifications and classes -- Part 7: Graded non-woody briquettes
Page 31 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
7. Fuels
NB EAS 158: 2012 - Automotive gasoline, premium motor spirit — Specification
NB EAS 177: 2012 - Automotive gas oil (automotive diesel) — Specification
TZS 580:2006 – Illuminating kerosene - Specification
TZS 666:2001 – Aviation turbine fuel (Jet A-1) - Specification
TZS 672:2012 / EAS 158:2012 – Automotive gasoline (premium motor spirit) – Specification
TZS 673:2014 – Fuel oils – Specification
TZS 674:2012 / EAS 177:2012 – Automotive gas oil (automotive diesel) – Specification
TZS 675:2014 – Multipurpose automotive gear lubricants (EP) – Specification
TZS 818:2004 – Liquefied petroleum gases (LPG) - Specification
TZS 1099:2012 – Automotive biodiesel fuel – Specification
TZS 1247:2012 – Fuel additives – Specification
US 765:2007 - Wood charcoal and charcoal briquettes for household
US EAS 158: 2012 - Automotive gasoline, premium motor spirit — Specification
US EAS 177: 2012 - Automotive gas oil (automotive diesel) — Specification
US 803:2008 – Kerosene for domestic heating and illuminating (BIK)
US 916:2011 Specification for denatured fuel ethanol as used for blending with gasoline
US 933:2011 Gasohol — Specification for E5 and E10
US 946:2011 Specification for biodiesel fuel as used for blending with automotive gas oil
US 971-4:2014 – Liquefied petroleum gases (LPG) – Part 4: Specification
US ISO 4261:2013 - Petroleum products -- Fuels (class F) -- Specifications of gas turbine fuels for industrial and marine applications
US ISO 8217:2012 – Petroleum products – Fuels (class F) – Specifications of marine fuels
US ISO 15403-1:2006 - Natural gas -- Natural gas for use as a compressed fuel for vehicles -- Part 1: Designation of the quality
SASO 845:1994 - Household kerosene (spirit white)
SASO 1951:2006 - Unleaded motor vehicles gasoline
SASO 2054:2002 - Fuel oils
SASO 2075:2002 - Aviation gasoline
SASO 2263:2004 - Aviation turbine fuels
NIS 212:1985 - Specification for Residual Fuel Oils
NIS 534:2006 - Standard for E 10 Automobile Fuel
NIS 116:2006 - Specification for Premium motor spirit (Petrol)
NIS 129:1981 - Specification for aviation gas turbine kerosene (Jet A1)
NIS 141:2006 - Specification for Kerosene
NIS 149:2006 - Specification for Gas Oil (Diesel Oil)
NIS 164:1982 - Specification for Aviation Gasoline
NIS 555:2014 - Standards for Liquefied Petroleum Gas (LPG)
NIS 615:2009 - Standard for Bio-diesel fuel (B20)
Page 32 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
7. Fuels
ISO 17225-1:2014 - Solid biofuels -- Fuel specifications and classes -- Part 1: General requirements
ISO 17225-2:2014 - Solid biofuels -- Fuel specifications and classes -- Part 2: Graded wood pellets
ISO 17225-3:2014 - Solid biofuels -- Fuel specifications and classes -- Part 3: Graded wood briquettes
ISO 17225-4:2014 - Solid biofuels -- Fuel specifications and classes -- Part 4: Graded wood chips
ISO 17225-5:2014 - Solid biofuels -- Fuel specifications and classes -- Part 5: Graded firewood
ISO 17225-6:2014 - Solid biofuels -- Fuel specifications and classes -- Part 6: Graded non-woody pellets
ISO 17225-7:2014 - Solid biofuels -- Fuel specifications and classes -- Part 7: Graded non-woody briquettes
ISO 4261:2013 - Petroleum products -- Fuels (class F) -- Specifications of gas turbine fuels for industrial and marine applications
ISO 8217:2012 - Petroleum products -- Fuels (class F) -- Specifications of marine fuels
ISO 16861:2015 - Petroleum products -- Fuels (class F) -- Specifications of dimethyl ether (DME)
ISO 8216-3:1987 (confirmed in 2015) - Petroleum products -- Fuels (class F) -- Classification -- Part 3: Family L (Liquefied petroleum gases)
ISO 9162:2013 - Petroleum products -- Fuels (class F) -- Liquefied petroleum gases – Specifications
ISO 13734:2013 - Natural gas -- Organic components used as odorants -- Requirements and test methods
ISO 14687-1:1999 - Hydrogen fuel -- Product specification -- Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles
ISO 14687-2:2012 - Hydrogen fuel -- Product specification -- Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
ISO 14687-3:2014 - Hydrogen fuel -- Product specification -- Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances
ISO 15403-1:2006 (confirmed in 2016) - Natural gas -- Natural gas for use as a compressed fuel for vehicles -- Part 1: Designation of the quality
ISO/TR 15403-2:2006 - Natural gas - Natural gas for use as a compressed fuel for vehicles -- Part 2: Specification of the quality
8.
Rubber and Plastic Products
EAS 354:2004 – Plastic containers for up to 5 litres capacity – Specification
ES 7093:2014 – Essential requirements for safety of toys
KS 511-1:1991 (confirmed 2011) - Specification for plastic containers - Part 1: Buckets.
KS 511-2:1994 (confirmed 2011) – Specification for plastic containers – Part 2: Basins
KS 1581-1:2001 (confirmed 2016) – Specification for thermoplastic dustbins and lids – Part 1: Thermoplastic dustbins
KS 1581-2:2001 (confirmed 2016) - for thermoplastic dustbins and lids – Part 2: Plastic and rubber dustbin lids
KS 1783:2004 - Rubber and plastic containers for lead-acid storage batteries - Specification
KS 1846:2007 - Rubber bands – Specification
KS 2054:2007 - Rubber erasers – Specification
KS 2519:2014 – Shoe brush – Specification
KS 2525:2014 – Plastic crates – Specification
KS ISO 6112:1992 - Moulded plastics footwear - Lined or unlined poly (vinyl chloride) industrial boots with general-purpose resistance to animal fats and vegetable oils – Specification
KS ISO 2000:1989 - Raw rubber in bales – Specification
Page 33 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
KS ISO 15747:2010 (Adopted 2010) – Plastic containers for intravenous injections
KS ISO 25841:2014 (Adopted 2016) – Female condoms – Requirements and test methods
KS ISO 4633:2002 - Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
KS ISO 6448:1985 - Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material
KS ISO 4586-1:1999 - High pressure decorative laminates sheets made from thermosetting resins - Part 1: Classification and specifications.
KS EAS 354:2007 – Plastic containers for up to 5 litres capacity - Specification
NB EAS 354:2007 – Plastic containers for up to 5 litres capacity - Specification
TZS 927:2007- Plastic carrier bags – Specification
TZS 1232:2010 – Plastic monobloc chairs - Specification
TZS 1516:2011 / ISO 25841:2011 – Female condoms – Requirements and test
TZS 1532:2012 – Plastic crates for fruits and vegetables – Specification
TZS 1635:2013 / ISO 4079:2009 - Rubber hoses and hose assemblies – Textile-reinforced hydraulic types for oil- based or water-based fluids - Specification
TZS 1636:2013 / ISO 18752:2012 – Rubber hoses and hose assemblies – Wire-or-textile-reinforced single pressure types for hydraulic application – Specification
TZS 1637:2013 / ISO 1307:2006 - Rubber and plastics hoses- Hose sizes, minimum and maximum inside diameters and tolerance on cut- to- length hoses
US 202-1:2015 – Flexible polyurethane foam – Part 1: Polyether type – Specification
US 202-2:2015 – Flexible polyurethane foam – Part 2: Mattresses – Specification
US 202-3:2015 – Flexible polyurethane foam – Part 3: Reconstituted foams – Specification
US 202-4:2015 – Flexible polyurethane foam – Part 4: Polyester type - Specification
US 438:2002 – Specification for plastic containers for up to 5 litres capacity
US 634:2006 - Specification for plastic monobloc chairs
US 766:2007 - Plastic basins — Specification
US 773:2007 – Flat and carrier plastic bags - Specification
US 883-1:2009 – Single-use medical examination gloves – Part 1: Specification for gloves made from rubber latex or rubber solution
US 883-2:2009 – Single-use medical examination gloves – Part 2: Specification for gloves made from poly (vinyl chloride)
US 915-1:2011 Resilient floor coverings — Expanded (cushioned) polyvinyl chloride floor covering — Specification
US ISO 1307:2006 - Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
US ISO 1403:2005 - Rubber hoses, textile-reinforced, for general-purpose water applications – Specification
US ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
US ISO 2398:2006 - Rubber hoses, textile-reinforced, for compressed air – Specification
US ISO 2928:2003 - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
US ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
US ISO 3821:2008 - Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
US ISO 3861:2005 - Rubber hoses for sand and grit blasting – Specification
Page 34 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
US ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
US ISO 3994:2014 - Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification
US ISO 4074: 2002 - Natural latex rubber condoms — Requirements and test methods
US ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 4081:2010 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
US ISO 4586-1:1997 - High-pressure laminates – Sheets from thermosetting resins – Part 1: Classification and specifications
US ISO 4641:2010 - Rubber hoses and hose assemblies for water suction and discharge – Specification
US ISO 4642-1:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
US ISO 4642-2:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
US ISO 4643:1992 - Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use – Specification
US ISO 5771:2008 - Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification
US ISO 5772:1998 - Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
US ISO 5774:2016 - Plastics hoses -- Textile-reinforced types for compressed-air applications – Specification
US ISO 6134:2005 - Rubber hoses and hose assemblies for saturated steam – Specification
US ISO 6224:2011 - Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification
US ISO 6804:2009 - Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers – Specification
US ISO 6807:2003 - Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification
US ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
USI ISO 8029:2007 - Plastics hose -- General-purpose collapsible water hose, textile-reinforced – Specification
US ISO 8066-2:2001 - Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a
US ISO 10282:2002 – Single-use sterile rubber surgical gloves – Specification
US ISO 10380:2012 - Pipework -- Corrugated metal hoses and hose assemblies
US ISO 10806:2003 - Pipework -- Fittings for corrugated metal hoses
US ISO 11237:2010 - Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 11424:1996 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines – Specification
US ISO 11425:1996 (confirmed in 2012) - Rubber hoses and hose assemblies for automobile power-steering systems – Specification
US ISO 12151-1:2010 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
US ISO 12151-2:2003 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
Page 35 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
US ISO 12151-3:2010 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
US ISO 12151-4:2007 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 4: Hose fittings with ISO 6149 metric stud ends
US ISO 13363:2004 - Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification
US ISO 13775-1:2000 - Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
US ISO 13775-2:2000 - Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
US ISO 14557:2002 - Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies
US ISO 17165-1:2007 - Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements
US ISO 23297:2008 - Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications – Specification
US ISO 25518:2009 – Single-use rubber gloves for general applications - Specification
SASO 862:1994 (GSO 495:1994) - Polybutylene (pb) plastic tubing for water
SASO 1862:2001 - Polycarbonate extruded sheets.
SASO 2171:2003 - Plastics-amino plastic moulding materials
SASO 2624:2006 - Plastic warning devices for underground cables and pipelines with visual characteristics
SASO 1928:2001 - General purpose injection moulded flat plastic pallets.
SASO GSO 1938:2010 - Rubber gloves for general purpose and household and beautician
SASO 166:1991 (GSO 141-1991) - Rubber hoses for household appliance using liquefied petroleum gases.
SASO 2267:2004 - Plastic hoses and hose assemblies’ thermoplastic textile - reinforced, hydraulic type - Specification
SASO 1720:2000 (GSO 1172:2002) - Polyvinyl chloride resin for industrial purposes.
SASO 2622:2009 (GSO 1938-2009) - Rubber general purpose, household or beautician
SASO 2051:2002 - Unplasticized polyvinyl chloride (u-PVC) extruded sheet
SASO ISO 1140:2014 - Fibre ropes -- Polyamide -- 3-, 4-, 8- and 12-strand ropes
SASO ISO1141:2014 - Fibre ropes -- Polyester -- 3-, 4-, 8- and 12-strand ropes
SASO ISO 1181:2007 - Fibre ropes -- Manila and sisal -- 3-, 4- and 8-strand ropes
SASO ISO 1307:2014 - Rubber and plastic hoses for general-purposes industrial application-bore diameters and tolerances, and tolerances on length
SASO ISO 1346:2014 - Fibre ropes -- Polypropylene split film, monofilament and multifilament
(PP2) and polypropylene high-tenacity multifilament (PP3) -- 3-, 4-, 8- and 12-strand ropes
SASO ISO 1969:2005 - Fibre ropes -- Polyethylene -- 3- and 4-strand ropes
NIS 08:1973 - Standard on plastic bucket made from polyethylene
NIS 09:1973 - Standard on nylon toothbrushes
NIS 10:1973 - Specification for nylon mono filaments used for toothbrushes
NIS 22:1974 - Specification for plastic bowls made from polyethylene
NIS 226:1987 – Specification for reconstituted flexible polyurethane foam
NIS 36:1974 - Specification for unplasticized polyvinyl Chloride (UPVC) conduits for electrical installation
NIS 295:1993 - Specification for flexible polyurethane foam mattresses
NIS 298:1993 - Standard for plastic melamine table wares
NIS 375:2010 - Standard for Unplasticized polyvinyl chloride (UPVC) pipes
NIS 421: 2000 - Standard for Technically Specified Raw Natural Rubber
NIS 422:2000 - Standard for vest shaped carrier plastic shopping bags
Page 36 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
NIS 423:2000 - Standard for plastic buckets for industrial use
NIS 458:2004 - Specification for rubber examination gloves
NIS 464:2004 - Specification for furniture- synthetic plastic chair
NIS 478-1: 2004 - Specification for Male Condoms Made from Natural Latex Pt- 1
NIS 494:2004 - Standard for plastic jerry cans
NIS 060: 1975 - Specification for Inner Tubes of Bicycles
NIS 254: 1989 - Standard Specifications for flexible polyurethane foam pillows for domestic use
NIS 537:2006 - Standard for plastics drinking straws
NIS 540:2006 - Standard for plastic thermowares (coolers and warmers)
NIS 541:2006 - Standard for plastic tableware
NIS 565-1:2007 - Standard for Oil Discharge Rubber Hose - Part 1 - Specifications
NIS 573:2008 - Specification of Alkyd Resin
NIS 576:2008 - Specifications for emulsion resins and acrylic
NIS 577:2008 - Specification for polyester resin
NIS 683:2009 - Grading and specification on Natural Rubber- Standard Nigerian Rubber (SNR)
ASTM D1056-14 –Standard specification for flexible cellular materials – Sponge oe expanded rubber 1,2
ASTM D1755-15 - Standard Specification for Poly (Vinyl Chloride) Resins
ASTM D1763-00(2013) - Standard Specification for Epoxy Resins
ASTM D4549-15 - Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4635-16 - Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4802-16 - Standard Specification for Poly (Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D5675-13 - Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ISO 1060-1:1998 (confirmed 2013) – Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 1: Designation and basis for specification
ISO 4074:2015 - Natural rubber latex male condoms -- Requirements and test methods
ISO 4586-1:2015 - High-pressure laminates – Sheets from thermosetting resins – Part 1: Classification and specifications
ISO 10282:2014 – Single-use sterile rubber surgical gloves – Specification
ISO 11193-1:2008 (confirmed in 2013) - Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution
ISO 11193-2:2006 (confirmed in 2016) - Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride)
ISO 15747:2010 – Plastic containers for intravenous injections
ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
ISO 20299-1:2015 - Film for wrapping rubber bales -- Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
ISO 20299-2:2006 - Film for wrapping rubber bales -- Part 2: Natural rubber
ISO 20299-3:2008 (confirmed in 2016) - Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
ISO 25518:2009 (confirmed in 2014) – Single-use rubber gloves for general applications - Specification
ISO 25841:2014 – Female condoms – Requirements and test methods
ISO 2000:2014 - Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR)
Page 37 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 2027:1990 (confirmed in 2016) - Natural rubber latex concentrate, evaporated, preserved – Specification
ISO 4898:2010 (confirmed in 2015) - Rigid cellular plastics -- Thermal insulation products for buildings – Specifications
ISO 5999:2013 - Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay – Specification
ISO 6453:1985 (confirmed in 2012) - Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting – Specification
ISO 6915:1991 (confirmed in 2012) - Flexible cellular polymeric materials -- Polyurethane foam for laminate use – Specification
ISO 6916-1:1995 (confirmed in 2015) - Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting
ISO 6916-2:2001 (confirmed in 2016) - Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 2: Mouldings and extrusions
ISO 8873-1:2006 (confirmed in 2016) - Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications
ISO 11833-1:2012 - Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 1: Sheets of thickness not less than 1 mm
ISO 11833-2:1998 (confirmed in 2013) - Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm
ISO 11963:2012 - Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
ISO 13636:2012 - Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets
ISO 14526-1:1999 (confirmed 2014) - Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14526-3:1999 (confirmed 2014) - Plastics -- Phenolic powder moulding compounds (PF-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14527-1:1999 (confirmed 2014) - Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14527-3:1999 (confirmed 2014) - Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14528-1:1999 (confirmed 2014) – Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specification
ISO 14528-3:1999 (confirmed 2014) – Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds
ISO 14529-1:1999 (confirmed 2014) – Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 1: Designation system and basis for specification
ISO 14529-3:1999 (confirmed 2014) – Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14530-1:1999 (confirmed 2014) – Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 1: Designation system and basis for specification
ISO 14530-3:1999 (confirmed 2014) – Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14631:1999 (confirmed in 2014) - Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods
ISO 14632:1998 (confirmed in 2013) - Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods
Page 38 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 15013:2007 (confirmed in 2015) - Plastics -- Extruded sheets of polypropylene (PP) -- Requirements and test methods
ISO 15014:2007 (confirmed in 2015) - Plastics -- Extruded sheets of poly(vinylidene fluoride) (PVDF) -- Requirements and test methods
ISO 15015:2011 (confirmed in 2016) - Plastics -- Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) -- Requirements and test methods
ISO 15252-1:1999 (confirmed 2014) – Plastics – epoxy powder moulding compounds (EP-PMCs) – Part 1: Designation system and bsis of specification
ISO 15252-3:1999 (confirmed 2014) – Plastics – epoxy powder moulding compounds (EP-PMCs) – Part 3: requirements for selected moulding compounds
ISO 15527:2010 - Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
ISO 15987:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films
ISO 15988:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films
ISO 15989:2004 (confirmed in 2012) - Plastics -- Film and sheeting -- Measurement of water-contact angle of corona-treated films
ISO 17088:2012 – Specification for compostable plastics
ISO 17555:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films
ISO 17557:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Cast polypropylene (PP) films
ISO 4586-3:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
ISO 4586-5:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 5: Classification and specifications for flooring grade laminates less than 2 mm
thick intended for bonding to supporting substrates
ISO 4586-6:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
ISO 4586-7:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 7: Classification and specifications for design laminates
ISO 4586-8:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 8: Classification and specifications for alternative core laminates
ISO 13894-2:2005 (confirmed in 2013) - High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use
ISO 19712-1:2008 (confirmed in 2016) - Plastics -- Decorative solid surfacing materials -- Part 1: Classification and specifications
ISO 4437-1:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 1: General
ISO 4437-2:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 2: Pipes
ISO 4437-3:2014 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: Fittings
ISO 4437-4:2015 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 4: Valves
ISO 4437-5:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 5: Fitness for purpose of the system
Page 39 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 6993-1:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
ISO 6993-2:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
ISO 6993-3:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
ISO 11424:2017 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines – Specification
ISO 13775-1:2015 - Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
ISO 13775-2:2016- Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
ISO 15840:2004 - Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
ISO 16486-1:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General
ISO 16486-2:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes
ISO 16486-3:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings
ISO 16486-5:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system
ISO 1307:2006 (confirmed in 2014) - Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
ISO 1403:2005 (confirmed in 2013) - Rubber hoses, textile-reinforced, for general-purpose water applications – Specification
ISO 2398:2016 - Rubber hoses, textile-reinforced, for compressed air – Specification
ISO 3994:2014 - Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification
ISO 4641:2016 - Rubber hoses and hose assemblies for water suction and discharge – Specification
ISO 5774:2016 - Plastics hoses -- Textile-reinforced types for compressed-air applications – Specification
ISO 6134:2017 - Rubber hoses and hose assemblies for saturated steam – Specification
ISO 6224:2011(confirmed 2016) - Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification
ISO 8029:2014 - Plastics hose -- General-purpose collapsible water hose, textile-reinforced – Specification
ISO 10380:2012 - Pipework -- Corrugated metal hoses and hose assemblies
ISO 10806:2003 (confirmed in 2015) - Pipework -- Fittings for corrugated metal hoses
ISO 12151-1:2010 (confirmed in 2016) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO 12151-2:2003 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
ISO 12151-3:2010 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
ISO 12151-4:2007 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings – Part 4: Hose fittings with ISO 6149 metric stud ends
Page 40 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 12151-5:2007 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
ISO 12151-6:2009 (confirmed in 2016) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
ISO 15465:2004 (confirmed in 2013) - Pipework -- Stripwound metal hoses and hose assemblies
ISO 17165-1:2007 (confirmed in 2011) - Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements
ISO 18752:2014 - Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification
ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 1823:2015 - Rubber hose and hose assemblies for oil suction and discharge service – Specification
ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
ISO 2928:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
ISO 3821:2008 - Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
ISO 3861:2005 (confirmed in 2013) - Rubber hoses for sand and grit blasting – Specification
ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 4081:2016 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
ISO 4642-1:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
ISO 4642-2:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
ISO 5771:2008 (confirmed in 2016) - Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification
ISO 5772:2015 - Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
ISO 6804:2016 - Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers – Specification
ISO 6805:1994 (confirmed in 2015) - Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining – Specification
ISO 6806:2014 - Rubber hoses and hose assemblies for use in oil burners – Specification
ISO 6807:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification
ISO 6808:2014 - Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids – Specification
ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
ISO 8066-2:2001 (confirmed in 2016) - Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a
ISO 8207:1996 (confirmed in 2012) - Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes
Page 41 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 8789:2009 - Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles – Specification
ISO 11237:2010 - Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 11425:1996 (confirmed in 2012) - Rubber hoses and hose assemblies for automobile power-steering systems – Specification
ISO 11759:1999 - Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) – Specification
ISO 13363:2016 - Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification
ISO 1401:2016 - Rubber hoses for agricultural spraying
ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 1823:2015 - Rubber hose and hose assemblies for oil suction and discharge service – Specification
ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
ISO 2928:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
ISO 3861:2005 (confirmed in 2013) - Rubber hoses for sand and grit blasting – Specification
ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 4081:2016 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
ISO 4642-1:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
ISO 4642-2:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
ISO 5359:2014 - Anaesthetic and respiratory equipment -- Low-pressure hose assemblies for use with medical gases
ISO 14557:2002 (confirmed 2012) - Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies
ISO 17324:2014 - Rubber hoses for automotive turbochargers – Specification
ISO 19013-1:2005 (confirmed in 2013) - Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels
ISO 19013-2:2016 - Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels
ISO 21012:2006 (confirmed in 2010) - Cryogenic vessels – Hoses
ISO 23297:2008 (confirmed in 2011) - Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications – Specification
ISO 27126:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals – Specification
ISO 27127:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas – Specification
ISO 28017:2011/Amd 1:2015 - Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification
Page 42 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 3934:2002 (confirmed in 2012) - Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods
ISO 4633:2015 - Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
ISO 4635:2011(confirmed in 2016) - Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways – Specification
ISO 5892:2013 - Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets – Specification
ISO 6447:1983 - Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material
ISO 6448:1985 (confirmed in 2012) - Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material
ISO 9631:2003 - Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material
ISO 16010:2005 (confirmed in 2013) - Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO 16589-1:2011 (confirmed in 2016)- Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances
ISO 23711:2003 (confirmed in 2013) - Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers
ISO 4643:1992 (confirmed in 2013) - Moulded plastics footwear -- Lined or unlined poly (vinyl chloride) boots for general industrial use – Specification
ISO 6123-1:2015 - Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness
ISO 6123-2:2015 - Rubber or plastics covered rollers -- Specifications -- Part 2: Surface characteristics
ISO 5893:2002 (confirmed in 2012) - Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) – Specification
ISO 14531-1:2002 (confirmed in 2013) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes
ISO 14531-2:2004 (confirmed in 2012) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing
ISO 14531-3:2010 (confimed in 2016) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
ISO 17885:2015/Amd 1:2016 - Plastics piping systems -- Mechanical fittings for pressure piping systems – Specifications
9. Paints and Varnish
EAS 184:2000 – Emulsion paint - Specification
EAS 289:2007 - Specification for aluminium pigments for paints
KS 159:1979 (confirmed 2011)- Specification for zinc oxide for paints
KS 160:1980 (confirmed 2016) - Specification for whiting for paints
KS 162:1997 (confirmed 2017) - Specification for road marking
KS 163:2000 (confirmed 2017) - Colours for ready mixed paints
KS 621:1986 (confirmed 2011) - Specification for black bituminous paints for cold application
KS 622:1987 (confirmed 2017)- Specification for aluminium priming paints for woodwork
KS 666:2011 (confirmed 2017) - Specification for white spirit (mineral turpentine)
KS 667:2013 - Specification for water thinned priming paints for wood
KS 811:2013 - Specification for semi-gloss emulsion paints for exterior use
KS 812:2012 - Specification for matt emulsion paint for exterior use
KS 813:2013 - Specification for matt solvent borne paints for interior and exterior use
KS 909:1991 - Specification for semi-gloss solvent borne paints for interior and exterior use
KS 910:1999 - Specification for super-gloss solvent borne paints for interior and exterior use
Page 43 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
KS 1101:1991 (confirmed 2011) - Specification for titanium dioxide pigments for paints
KS 1102:1991 (confirmed 2011)- Specification for lithopone pigments for paints
KS 1103:1994 (confirmed 2011)- Specification for aluminium pigments for paints
KS 1104:1992 (confirmed 2005)- Specification for iron oxide pigments for paints
KS 1105:1994 (confirmed 2011)- Specification for Zinc dust pigment for paint
KS 1266:1995 - Specification for polyester body fillers
KS 1274:1996 - Specification for epoxy paint for coffee fermentation tanks
KS 1276:2012 - Specification for Air dried roofing paints
KS 1027-1:2012 - Specification for auto-refinishing paints - Part 1: Synthetic resin
KS 1027-2:2012 - Specification for auto-refinishing paints - Part 2: Nitrocellulose resin based
KS 1716:2012 - Specification for 2-pack acrylic resin based auto refinishing paint
KS 1717:2003 (confirmed 2017) - Specification for thinner for synthetic resin based auto-refinishing paints
KS 1718:2003 (confirmed 2017) - Specification for thinner for nitocellulose resin based paints and lacquers
KS 1719:2003 (confirmed 2017) - Specification for thinner for acrylic resin based auto-refinishing paint
KS 1822:2007(confirmed 2017) - Solvent-based universal undercoat - Specification
KS 1831:2007 (confirmed 2017) -Solvent-based paint remover - Specification
KS 1823:2007(confirmed 2017) - Water-based undercoat – Specification
KS 1985-1:2007 (confirmed 2016) - Marine paints - Specification - Part 1: Two-pack epoxy primer marine paint
KS 1985-3:2007 (confirmed 2016) - Marine paints - Specification - Part 3: Vinyl paints-primer, high build and gloss marine paints
KS 1985-4:2007 (confirmed 2016) - Marine paints - Specification - Part 4: Two pack epoxy enamel
KS 1985-5:2007 (confirmed 2016) - Marine paints - Specification - Part 5: Waterborne primer for galvanized, zinc / aluminium alloy-coated
KS 1985-6:2007 (confirmed 2016) - Marine paints - Specification - Part 6: Two-pack full gloss polyurethane marine paint
KS 1985-7:2007(confirmed 2016) - Marine paints - Specification - Part 7: Etch primers (Single pack and two-pack)
KS 1985-8:2007 (confirmed 2017) - Marine paints - Specification - Part 8: Non-slip deck paint
KS 1985-10:2007 (confirmed 2016) - Marine paints - Specification - Part 10: Hydrolysing organosilyl polymer-based antifouling marine paint
KS 1985-21:2007(confirmed 2016) - Marine paints - Specification - Part 21: Ready mixed exterior finishing paints for ships
KS 1992:2007 (confirmed 2016) - Two-pack epoxy zinc phosphate weldable primer - Specification
KS 2157-1:2009 (confirmed 2014) - Hot applied thermoplastic road marking paint - Specification - Part 1: Constituent material and mixtures
KS 2157-2:2009 (confirmed 2014) - Hot applied thermoplastic road marking paint - Specification - Part 2: Road performance
KS 2516:2014 - Shellac Varnish-Specification
KS 2581:2015 - Paints and varnishes - Varnish for wooden surface - Specification
KS EAS 289:2007 (confirmed 2017) - Specification for aluminium pigments for paints
KS ISO 788:1974 (confirmed 2017) Specification for ultramarine pigments for paints
KS ISO 1249:1974 - Specification for zinc chromate pigments - Basic potassium chromate pigments and zinc tetrahydroxy chromate pigments
KS ISO 2040:1972 - Specification for strontium chromate pigments for paints
Page 44 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
KS ISO 2068:1972 - Specification for barium chromate pigments for paints
KS ISO 3262-2:1998 (confirmed 2017) - Extenders for paints - Specification and methods of test - Part 2: Barytes (Natural Barium Sulphate)
KS ISO 3262-3:1998 (confirmed 2017) - Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe
KS ISO 3262-4:1998 (confirmed 2017) - Extenders for paints - Specifications and methods of test - Part 4: Whiting
KS ISO 3262-5:1998 (confirmed 2017) - Extender for paints - Specification and methods of test - Part 5: Natural crystalline calcium carbonate
KS ISO 3262-6:1998 (confirmed 2017) - Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate
KS ISO 3262-7:1998 (confirmed 2017) - Extenders for paints - Specifications and methods of test - Part 7: Dolomite
KS ISO 3262-9:1997 (confirmed 2017) - Extenders for paints - Specifications and methods of test - Part 7: Dolomite
KS ISO 4619:1998 (confirmed 2017) - Specification for driers for paints and varnishes
KS ISO 6745:1990 (confirmed 2017) - Specifications and methods for zinc phosphate pigments for paints
NB EAS 184: 2011 - Emulsion paints - Specification
NB EAS 289:2007 - Specification for aluminium pigments for paints
SASO 2397:2005 - Standard specification for liquid paint driers
SASO 818:1994 - Alkyd based undercoating paints for general purposes.
SASO 820:2010 - Aluminum Paints for general purposes.
SASO 91:1978 - Boiled linseed oil used in paints
SASO 2705:2007 - Paint varnish acrylic enamel
SASO 2832:2011 - Paints and varnish – Polyurethane primer surfacer
SASO 2704:2007 - Paints and varnish - Nitrocellulose finishing colored
SASO 2703:2007 - Paints and varnish - Nitrocellulose paints - colored base
SASO 2702:2007 - Paints and varnish - Nitrocellulose paints - transparent cellar
SASO 2708:2007 - Paints and varnishes -- Adhesion strength
SASO 471:2002 - Paints and varnishes - Alkyd flat paints
SASO 2833:2011 - Paints and varnishes - Solvent based polyurethane paints
SASO 2060:2002 - Paints and varnishes - Emulsion Primers
SASO 470:2016 - Paints and varnishes - Emulsion paints
SASO 944:1998 - Paints and Varnishes - Glass beads for road marking Paints.
SASO 472:2002 - Paints and varnishes – Gloss and semi-gloss alkyd enamel paints
SASO 929:1994 - Paints and Varnishes - Hot applied thermoplastic Road making materials. Part 1: Specification and Requirements. Part 2: Road Performance. Part 3: Specification for applications.
SASO 1960:2001 - Polish and oil finish for furniture
SASO 817:1994 - Primary paints
SASO 819-1994 - Road Marking Paints
SASO ISO 591-1:2014 - Titanium Dioxide Pigments for Paints – Part 1: Specification and methods of test
SASO 2628:2006 - Paint and Varnishes - Red oxide metal primer
SASO 2629:2006 - Paint and Varnishes - solvent borne alkali resistant primer
SASO 2626:2006 - Paint and Varnishes - water based texture paints
SASO 2627:2006 - Paints and Varnishes - Roof Coating (water based)
SASO 2705:2007 - Paints and Varnishes – Solvent based acrylic enamel paints
SASO 2833:2011 - Paints and Varnishes – Solvent based polyurethane paints
Page 45 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
SASO 2834:2011 - Paints and Varnishes – Solvent based polyurethane clear
SASO 2397:2005 - standard specification for liquid paint driers
SASO 2851:2013 - Paints and varnishes -Epoxy Coal Tar
SASO 2852:2013 - Paints and varnishes -Epoxy Primer
SASO 2853:2013 - Paints and varnishes -Epoxy Clear Sealer
SASO ISO 276:2010 - Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test
SASO ISO 277:2010 - Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test
SASO ISO 4619:2010 - Driers for paints and varnishes
SASO ISO 20340:2014 - Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures
SASO GSO 4619:2008 - Driers for paints and varnishes
NIS 268:2008 - Standard for paints and vanishes for gloss paints for decorative purposes
NIS 269:2008 - Specification for emulsion paints for decorative purposes
NIS 273: 1990 - Standard panels for testing. Standards for paints and vanishes
NIS 575:2008 - Specification for textured paints for decorative purposes
NIS 576:2008 - Specifications for emulsion resins and acrylic
TZS 699: 2009 - Super-gloss solvent borne paints for interior and exterior use – Specification
TZS 721:2008- Specification for road marking paints
TZS 722: 2008 - Specification for matt emulsion paints for interior and exterior use
TZS 723: 2008 - Specification for silk (sheen) emulsion paints for interior and exterior use
TZS 724: 2011 - Matt solvent borne paints for interior and exterior use – Specification
TZS 726:2011 - Semi-gloss solvent borne paints for interior and exterior use –Specification
US EAS 184: 2011 - Emulsion paints - Specification
US 743:2007 Decorative high gloss paints - Specification
US 745-1:2007 Road and runway marking paints - Specification - Part 1: Single pack solvent borne and water-borne paints
US 745-2:2007 Road and runway marking paints - Specification - Part 2: Single pack water borne paints
ISO 473:1982 (confirmed in 2014) - Lithopone pigments for paints -- Specifications and methods of test
ISO 510:1977 (confirmed in 2012) - Red lead for paints
ISO 591-1:2000 (confirmed in 2017) - Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test
ISO 788:1974 (confirmed in 2012) - Ultramarine pigments for paints
ISO 1247:1974 (confirmed in 2012) - Aluminium pigments for paints
ISO 1248:2006 (confirmed in 2015) - Iron oxide pigments -- Specifications and methods of test
ISO 1249:1974 (confirmed in 2015) - Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
ISO 2040:1972 (confirmed in 2012) - Strontium chromate pigments for paints
ISO 2068:1972 (confirmed in 2012) - Barium chromate pigments for paints
ISO 2495:1995 (confirmed in 2015) - Iron blue pigments -- Specifications and methods of test
ISO 3262-2:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 2: Barytes (natural barium sulfate)
ISO 3262-3:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 3: Blanc fixe
Page 46 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
ISO 3262-4:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 4: Whiting
ISO 3262-5:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate
ISO 3262-6:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate
ISO 3262-7:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite
ISO 3262-8:1999 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay
ISO 3262-9:1997 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay
ISO 3262-10:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form
ISO 3262-11:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc, in lamellar form, containing carbonates
ISO 3262-12:2001 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica
ISO 3262-13:1997 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)
ISO 3262-14:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite
ISO 3262-15:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica
ISO 3262-16:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides
ISO 3262-17:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate
ISO 3262-18:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate
ISO 3262-19:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica
ISO 3262-20:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica
ISO 3262-21:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz)
ISO 3262-22:2001 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr
ISO 3549:1995 (confirmed in 2016) - Zinc dust pigments for paints -- Specifications and test methods
ISO 3711:1990 (confirmed in 2012) - Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test
ISO 4620:1986 (confirmed in 2012) - Cadmium pigments -- Specifications and methods of test
ISO 4621:1986 (confirmed in 2012) - Chrome oxide green pigments -- Specifications and methods of test
ISO 6745:1990 (confirmed in 2012) - Zinc phosphate pigments for paints -- Specifications and methods of test
ISO 150:2006 - Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test
ISO 276:2002 (confirmed in 2012) - Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test
ISO 277:2002 (confirmed in 2012) - Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test
Page 47 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9. Paints and Varnish
ISO 4619:1998 (confirmed in 2013) - Driers for paints and varnishes
ISO 8623:2015 - Tall-oil fatty acids for paints and varnishes -- Test methods and characteristic values
ASTM D211-67(2012) – Standard specification for chrome yellow and chrome orange pigments
ASTM D960-02 – Standard specification for raw castor oil
ASTM D2916-09 – Standard specification for isophorone
Directive 1999/13/EC - Paints and varnishes - Enamel, alkyd, gloss air-drying for exterior and interior purposes.
Directive 1999/13/EC - Decorative paint for interior use
Directive 1999/13/EC - Spraying lacquer - general use
Directive 1999/13/EC - Semi gloss enamel
Directive 1999/13/EC - Nitrocellulose surfacer for automobiles
Directive 1999/13/EC - Clear varnish
Directive 1999/13/EC - Spraying lacquer - general use
Directive 1999/13/EC - Semi gloss enamel
Directive 1999/13/EC - Nitrocellulose surfacer for automobiles
Directive 1999/13/EC - Clear varnish
Directive 1999/13/EC - Spraying Lacquer, Matt (Acrylic and Nitro
Directive 1999/13/EC - Automobile paint/putty/polish/clear
Directive 1999/13/EC - Polyester putty for repair and levelling for automobiles
Directive 1999/13/EC - Lacquer cellulose pigmented finishing, glossy (for cars)
Directive 1999/13/EC - Air drying acrylic paints for automobiles
Directive 1999/13/EC - Acrylic Paint for Automobiles (two packs: paint + hardener)
Directive 1999/13/EC - Acrylic Paint for Automobiles (three packs: Paint+ hardener + clear)
Directive 1999/13/EC - Acrylic surfacer for Automobiles (one pack)
Directive 1999/13/EC - Acrylic surfacer for Automobiles (two packs)
Directive 1999/13/EC - Acrylic Thinner
Directive 1999/13/EC - Paints and varnishes - PVA Synthetic resin emulsion paint
10.
Adhesives and Sealants
KS 403:1997 (confirmed 2011) – Specification for resin paper adhesive for general office use
KS 509:1997 (confirmed 2011) - Specification for adhesives for woodworking
KS 589-1:1996 (confirmed 2011) - Specification for carton adhesives - Part 1: Corrugated fibreboard boxes - PVA adhesives
KS 651-1:1996 (confirmed 2011) - Specification for footwear adhesives - Part 1: Rubber based adhesives
KS 1522-1:1999 (confirmed 2011) - Specification for rubber-based adhesives for tyres and tubes - Part 1: Non-curing
KS 1522-2:1999 (confirmed 2011) - Specification for rubber-based adhesives for tyres and tubes - Part 2: Curing
KS 1273:1995 - Specification for unsaturated polyester resin for body fillers
KS 1518:1999 (confirmed 2011) - Specification for sunflower oil based long oil alkyd resin
KS 1519:1999 (confirmed 2011) - Specification for sayabean oil based long oil alkyd resin
KS 1520:1999 (confirmed 2011) - Specification for safflower oil based long oil alkyd resin
KS 1530:1999 (confirmed 2011) - Specifications for adhesives for use with ceramic tiles
KS 1744:2002 (confirmed 2016) – Specification for cold-applied joint sealants for concrete pavements (polymer based with a curing agent)
KS 1759:2002 (confirmed 2016) - Specification for hot-applied joint sealants for concrete pavements
KS 2080:2007 (confirmed 2013) – Elastomeric seals for joints in pipe work and pipelines - Specification