Building Maintenance Units - Monorails - Gantries

Permanent Suspended Access

2

Main Station Berlin (D)

Bahrain World Trade Center

Le Monde, Paris (F)

Naberezhnaya Towers, Moscow (RU)

Riemst Bridge (B)

Torre Mayor Chapultepec (MEX)

Ministry of Electricity (Bahrain)

Tractel SecaltTM: throughoutthe world...

2Burj Al Arab, Dubai (UAE)

3

Tractel Secalt S.A., part of the Tractel® Group, is the world’s leader in suspended access solutions, with more than 8,000 BMU references worldwide. These systems allow the maintenance of the world’s most famous buildings.

The knowledge and experience of Tractel SecaltTM, developed over many years, guarantees its customers, the most appropriate technical solutions that meet all the relevant quality standards and safety regulations.

Tractel Secalt S.A. is certified ISO 9001: 2008.

The different technical solutions developed by Tractel SecaltTM (machines, monorail, jibs, platforms, ladders…) are all solutions that can easily be integrated into the buildings architecture while taking into account the customer’s aesthetic and technical requirements.

Air Traffic Control Center, Abu Dhabi (UAE)

Kuwait Trade Center, Kuwait

Tractel SecaltTM:Access to the most inaccessible areas

3Burj Al Arab, Dubai (UAE)

For each building, its own solution

ORAIL, Ministry of Communications Ashgabat (TM)

Gantry over a glass canopy, Paris (F)

Suspended platform from traversing trolley on monorail, Morocco (M)

Suspended platform from a powered Davit, Basel (CH)

Gantry for external maintenance of telecommunication tower, Brussels (B)

4

Take advantage of Tractel Secalt experience

For each building, its own solution

Suspended powered platform on 2 Davits (ZA)

ALTA suspended platform from 2 Portafix jibs, Luxembourg (L)

Telescopic gantry for internal maintenance of glazed surfaces, London (UK)

MARS machine on parapet, Bologna (IT)

5

Take advantage of Tractel Secalt experience

Mustang machine on rails, Brussels (B)

6

Compact machines

SUSPENDED PLATFOR MS WITH ROOF CARS

With our vast experience of developing solutions, we can advise you from the very beginning of the projecton the most appropriate equipment.

● Roof spaceA BMU with roof car requires a track on the roof for traversing. Plan for enough space on the roof top for the machine to move near the buildings edge.Beware of obstacles such as stairway exits or air conditioning units…Depending on the roof space available, choose between a compact machine solution or a machine equipped with a mast.

● Machine tracksSeveral track solutions are available (concrete, free laying rails or attached rails) depending on the machine type and building structure.

Jib length (metres)

Lifti

ng H

eigh

t (m

etre

s)

Characteristics:• crossingoverhighparapets• adjustmenttothefacade• reducedgaugewidths• canbeusedonconcreteorrailtracks

7

Mast machines

SUSPENDED PLATFOR MS WITH ROOF CARS

Types of tracks

Lifti

ng H

eigh

t (m

etre

s)

Jib length (metres)

Characteristics:

• lightmachinewithcounterweightsattachedtojib• onlyavailableonrailtracks• suitableforverylongjibs

Rail track fixed to concrete or steel post

Rail track placed on concrete or steel plate

Concrete

8

Compact machines

Working height: max. 50 m (other heights on request)Jib length: max. 3 m

Compact, light, economic machine with powered platform (TIRAKTM hoist on the platform).Track gauge: 1.3 – 1.5 m

LUNAWorking height: max. 80 mJib length: max. 3 m

Simple and economic solution.TIRAKTM hoist is fitted on the roof car.Track gauge: 1.0 – 1.5 m

MARS/JUPITER

SATURNE

VENUS

Working height: 280 m and more Jib length: max. 10 m

Our bestsellers, compact and versatile.TIRAKTM hoist(s) installed within the turret.Track gauge: 0.8 - 1.8 m

Options: additional load winch, special cradles, ...

Working height: 280 m and more Jib length: >10 m

Themostperformantcompactmachine,withitsverylongjibandhydraulicluffing this machine is especially suited for very high parapets and limited space.Track gauge: 1.8 – 2.5 m

Options:telescopicjibsandtelescopicmasts.

9

Mast MachinesOnly available on rail tracks

Working height: max. 50 m (other heights on request)Jib length: max. 10 m

VIPER

MUSTANG

Working height: 280 m and more Jib length: max. 15 m

Flexiblemodel,withpossibilitytoadjustthemastheight.TIRAKTM hoist(s) installed within the turret.Track gauge: 1.8 m

SCORPIO

Working height: 280 m and more Jib length: >15 m

The most versatile machine, capable of lifting facade panels, special long cradles, ...Track gauge: 1.8 – 2.5 m

Options:telescopicjibsandtelescopicmasts.

LightweightBMUthankstocounterweightfixedtothebackofthejib.Equipped with powered platform (TIRAKTM hoist on the platform).Track gauge: 1.3 – 1.8 m

10

TIRAK™All machines are equipped with a

TIRAK™ traction hoist, either X

series (one cable) or XD series

(dual cable).

● Traction hoist, developed and

made by the TRACTEL® Group.

● Compact, robust, lightweight

and reliable design.

● Approved for man-riding

according to the European,

American and Canadian norms.

● Reduced maintenance

requirement prolongs

the life expectancy of the

machine.

TIRAK™ séRIe XD

Common characteristics

Options

Standard on JUPITER, SATURNEand SCORPIO machines

MAGTRON™ control

MAGTRONTM is a patented system by Tractel

secaltTM that allows the transmission of data

between cradle and roof car by induction of a

magnetic field in a closed circuit created by the steel

wire ropes.

Advantages:

● Elimination of the pendant electrical cable or

special suspension wire rope integrated electrical

wires.

● No need for a radio command.

● No requirement for a dedicated transmission

frequency.

● No interference with the

electrical or computing

environment.

● Control voltage reduced

to 10 V.

TIRAK™ séRIe X

● Machines CE certified and complying with the European

Machinery Directive and the European Standard EN 1808.

● Welded assembly, hot galvanised steel.

● Platforms made out of aluminium alloy.

● Double command from the machine and from the cradle.

● Motorised slewing turret.

● All the motors, electrical cabinets

and commands are IP 55.

● TIRAKTM traction lifting hoist.

● Singlejibwithslewingspreaderbar.

● Special spreader bars (V shaped, longer lengths,

articulated, …).

● Operations are powered and controlled through

the patented MAGTRONTM control system.

● Specially equipped against low temperature

(for geographic regions such as Russia, Scandinavia, …).

● Telescopicjib.

● Telescopic mast.

● Hoist for additional load.

● PLC (for programming movement).

● Guiding systems (by mullion guide or restraint plug).

11

SOLO cradle (1 person), max. lifting height 80 m

ALTA “L” 2 m platform, max. lifting height 220 m

Cradle with additional basket

Special Cradles for BMUs JUPITER, SATURNE, MUSTANG and SCORPIO

Powered Cradles

Deported cradlePantograph cradle

Platforms and Cradles

Powered cradles intended to be used with BMU roof cars (VENUS, VIPER, parapet trolleys), davits and monorails.

ALTA «P» cradle, max. lifting height 160 m

Fixed Davits Fixed Davits are an economic and simple solution, with ALTA or sOLO powered platform suspended to one or two Davits.

Advantages:

● Low installation cost.

● Lightweight and easy to move on the roof.

● No excess equipment on the roof.

● System can easily be dismantled when not in use.

Powered DavitsTraversing on a track fixed to the parapet, this system leaves the roof freeof equipment whilst providing a simple and efficient solution.

Powered Davits can be used with ALTA or sOLO platforms equipped with TIRAKTM hoists.

PoleliftsAn ideal solution for buildings under 20 m height, as the polelift mast is attached to rail tracks at the top and bottom of the structure allowing lateralmovement and the platform moves vertically on the mast.

Powered Davit with SOLO platform, Basel (CH)Fixed Davits

Powered Davits with ALTA platform (IT)

Polelift, Geneva (CH) Polelift, glazed dome, Reichstag Berlin (D)

12

Other Access Solutions: Davits, Polelifts, Gantries...

13

Other Access Solutions: Davits, Polelifts, Gantries...

AluliftElectric driven hydraulic platform for working heights up to 16 m.

The Alulift is a compact, lightweight and polyvalent platform which can pass through all standard doors, reaching 16 m in height. It can be powered either by mains electricity or by battery.

Ladders and Travelling GantriesSolutions for inside and external maintenance of glazed structures such as domes,atriums and buildings with panoramic views.

All mobile gantries are made from profiled aluminium, which can be coated or anodised depending on the customers requirements.

Mobile gantry with powered

ALTA platform suspended

from inclined RAILSCAF™

monorail

TRAVSAFE™ Lifelines

Providing individual height protection is a key priority for the TRACTeL®, Group, who can offer a complete safety solution (harness, lanyards and anchor points).

The horizontal lifelines TRAVsAFe™ / TRAVFLeX™ allow punctual, secure access to building tops where there is a risk of falling from height.

It is a dual cable lifeline that:

● Allows great personal mobility

● Allows up to five people to work simultaneously, attached to the same lifeline

Mobile gantry, Ministry of Communications Ashgabat (TM)

1414

An ideal system for integrating into metal structures and curtain wall facades, as it blends perfectly with the building. The monorails are made of aluminium alloy and may be supplied plain, anodised, or powder-coated.

They can be formed both vertically and horizontally to fully integrate with the facades. All monorails can be fitted with manual or powered trolleys which are easy to operate in complete safety.

O-SCAFMonorail with integrated chain for gantries travelling on outside sloped structures.

Profile: Aluminium 80 x 100 mm Max. distance between brackets: 2.0 m Max. loading per trolley: 350 kg

ORAIL with ALTA platform, King Abdullah University of Science and Technology (SA)

The monorail: a system integrated into the facade

EASYRAIL (FR)

ORAIL (Aluminium)Monorail in aluminium alloy, ideal aesthetic solution for an installation within a recess or false ceiling.

Profile: aluminium 115 x 95 mm Max. distance between brackets: 2.9 m Max. loading per trolley: 500 kg

EASYRAILMonorail for buildings where bigger spacing between brackets is required.

Profile: Aluminium 175 x 73 mm Max. distance between brackets: 4.4 m Max. loading per trolley: 500 kg

O-SCAF, TGV Railway station, Liège (B)

1515

RAILSCAF™Strong but compact monorail for horizontal applications.

Profile: Aluminium 120 x 40 mm Max. distance between brackets: 3.0 m Max. loading per trolley: 350 kg

I-SCAFMonorail for ceiling or cornice, which can be equipped with an integrated chain to negotiate slopes.

Profile: aluminium 55 x 110 mm Max. distance between brackets: 1.8 m Max. loading per trolley: 350 kg

The monorail: a system integrated into the facade

Climbing RAILSCAF™, London (UK)

RAILSCAF™ with ALTA platform, Paris (F)

Climbing RAILSCAF™Monorail fitted with an integrated chain allowing powered trolleys to negotiate steep inclinations.

Profile: Aluminium 120 x 45 mm Max. distance between brackets: 3.0 m Max. loading per trolley: 350 kg

I-SCAF, TGV Railway station, Liège (B)

16

Tractel Secalt S.A.3, rue du Fort Dumoulin B.P.1113•L-1011LuxembourgTel. : (352) 43.42.42-1Fax : (352) 43.42.42-200e-mail : secalt @tractel.com

P101

5-EN

-08/

2014

- D

ocum

ent n

on c

ontra

ctue

l © Tr

acte

l Sec

alt S

.A. 2

014

- All r

ight

s re

serv

ed.

www.tractel.com

Tractel SecaltTM: Having the Know-how

Distribution and After-sales ServiceAround the world, the TRACTEL Group companies, together withtheir distribution network, put their knowledge and experienceat your disposal to ensure a fast and efficient service.

For the details of your nearest distributor, contact Tractel Secalt S.A.

● TRACTEL® Group Company

• Distributor