12
Getting Started with PeopleSoft Supply Chain Management Inventory This chapter provides an overview of PeopleSoft Supply Chain Management (SCM) Inventory and discusses: PeopleSoft SCM Inventory business processes. PeopleSoft SCM Inventory integrations. PeopleSoft SCM Inventory implementation. PeopleSoft SCM Inventory Overview PeopleSoft SCM Inventory is a flexible, comprehensive inventory management system that enables you to increase your inventory accuracy and customer service levels and, at the same time, reduce your carrying costs, labor costs, and inventory write-offs. PeopleSoft SCM Inventory helps you make faster, more accurate decisions, which is critical in today's complex global inventory environments. With PeopleSoft SCM Inventory, you can: Gain real-time visibility into your inventory to guide swift and accurate decision-making. Create flexible controls and inventory tracking systems that reflect the unique way you do business—today and in the future. Strategically track all your demand requirements to maximize your customer service levels. Design flexible put-away plans, track the physical location and transfer of items, and maintain lot and serial controls for simplified material logistics. Increase labor productivity and inventory accuracy by selecting your preferred automated data collection solution—radio frequency, wedge, batch, or any combination of these—to use with Inventory. Simplify third-party label formatting and printing by creating label-specific flat files of your bar code data. Print bar codes on standard reports for easy reference. Enter and maintain costing information quickly and easily, and use that information to calculate appropriate valuations easily. PeopleSoft SCM Inventory Business Processes This diagram illustrates the PeopleSoft SCM Inventory business processes of putaway, order fulfillment, replenishment, RMA, par inventory, consigned inventory, container management, VMI, material usage, inventory counts, pegging, adjustments, and transfers:

PeopleSoft Enterprise Inventory 9.1

Embed Size (px)

DESCRIPTION

part2

Citation preview

Page 1: PeopleSoft Enterprise Inventory 9.1

Getting Started with PeopleSoft Supply ChainManagement Inventory

This chapter provides an overview of PeopleSoft Supply Chain Management (SCM) Inventory and discusses:

PeopleSoft SCM Inventory business processes.

PeopleSoft SCM Inventory integrations.

PeopleSoft SCM Inventory implementation.

PeopleSoft SCM Inventory Overview

PeopleSoft SCM Inventory is a flexible, comprehensive inventory management system that enables you to increaseyour inventory accuracy and customer service levels and, at the same time, reduce your carrying costs, labor costs,and inventory write-offs. PeopleSoft SCM Inventory helps you make faster, more accurate decisions, which is criticalin today's complex global inventory environments. With PeopleSoft SCM Inventory, you can:

Gain real-time visibility into your inventory to guide swift and accurate decision-making.

Create flexible controls and inventory tracking systems that reflect the unique way you do business—todayand in the future.

Strategically track all your demand requirements to maximize your customer service levels.

Design flexible put-away plans, track the physical location and transfer of items, and maintain lot and serialcontrols for simplified material logistics.

Increase labor productivity and inventory accuracy by selecting your preferred automated data collectionsolution—radio frequency, wedge, batch, or any combination of these—to use with Inventory.

Simplify third-party label formatting and printing by creating label-specific flat files of your bar code data. Printbar codes on standard reports for easy reference.

Enter and maintain costing information quickly and easily, and use that information to calculate appropriatevaluations easily.

PeopleSoft SCM Inventory Business Processes

This diagram illustrates the PeopleSoft SCM Inventory business processes of putaway, order fulfillment,replenishment, RMA, par inventory, consigned inventory, container management, VMI, material usage, inventorycounts, pegging, adjustments, and transfers:

Page 2: PeopleSoft Enterprise Inventory 9.1

PeopleSoft SCM Inventory business processes

We cover these business processes in the business process chapters in this PeopleBook.

PeopleSoft SCM Inventory Integrations

PeopleSoft Inventory integrates with many other applications in PeopleSoft Financials and PeopleSoft SCM (FSCM),as illustrated in the following diagram. An explanation of each integration point is given below the diagram:

Page 3: PeopleSoft Enterprise Inventory 9.1

PeopleSoft Inventory integration with other PeopleSoft applications within the FSCM product line

PeopleSoft Inventory integrates with these applications:

PeopleSoft Order Management

A sales order in PeopleSoft Order Management that includes stocked items is passed to PeopleSoftInventory to fulfill the order.

PeopleSoft Order Management retrieves data from PeopleSoft Inventory about quantities on hand,shipment history, and available to promise (ATP) quantities.

Inventory data can appear on several PeopleSoft Order Management pages.

During order entry, PeopleSoft Order Management can pass data to PeopleSoft Inventory, includingchoosing transportation routes, allocating lots, or using reservations processing to reserving or promisestock to fulfill the order.

Using the Alternate Sources of Supply page in PeopleSoft Order Management, a sales order can bepegged to an interunit transfer (material stock request) going to the destination inventory business unitwhere the sales order will be fulfilled.

PeopleSoft Inventory checks with PeopleSoft Order Management during picking and shipping to verifythat the sales order line has not been placed on hold.

Page 4: PeopleSoft Enterprise Inventory 9.1

If a sales order is changed or canceled in PeopleSoft Order Management, the system automaticallychanges or cancels it in PeopleSoft Inventory according to the setup in the Demand ChangeConfiguration feature.

When PeopleSoft Inventory ships the items, the data is updated on the sales order.

PeopleSoft Inventory also sends sales order information to PeopleSoft Billing for invoice creation.

PeopleSoft Supply Planning (which includes PeopleSoft Supply Planning Multisite Material Planner andPeopleSoft Supply Planning Advanced Multisite Planner)

PeopleSoft Supply Planning determines the material requirements and the production schedule tomake items in PeopleSoft Manufacturing.

PeopleSoft Supply Planning retrieves information from PeopleSoft Inventory about both raw materialsand finished goods. PeopleSoft Supply Planning also pulls data from PeopleSoft Purchasing,PeopleSoft Order Management˙, and PeopleSoft Manufacturing.

PeopleSoft Supply Planning then creates a schedule and sends planning messages to PeopleSoftInventory to create material stock requests that transfer stock from one PeopleSoft Inventory businessunit to another, to reschedule material stock requests, or to cancel material stock requests.

PeopleSoft Supply Planning also sends planning messages to PeopleSoft Manufacturing (for theproduction of make items), to PeopleSoft Purchasing (for the creation of purchase orders for neededmaterials), and to PeopleSoft Order Management (for the rescheduling of sales orders to match theproduction schedule).

PeopleSoft Purchasing

You can send a requisition created in PeopleSoft Purchasing to PeopleSoft Inventory as a materialstock request if stock is available.

If stock is unavailable, you can add the requisition to a purchase order and dispatch it to a vendorusing PeopleSoft Purchasing.

When items on a purchase order are received from the vendor in PeopleSoft Purchasing, the items canbe put away in a PeopleSoft Inventory business unit using the putaway processes.

Using PeopleSoft Purchasing online pages, you can call the directed putaway feature in PeopleSoftInventory.

PeopleSoft Inventory passes replenishment requests to PeopleSoft Purchasing, including ad-hocreplenishment requests from the Reserve Materials process, stockless or nonstock replenishmentrequests from the Create Par Replenishment Requests process, or reorder point replenishmentrequests from the Replenishment Options process.

To return items that have been stocked in inventory, the data on the Return to Vendor (RTV) pages isentered in PeopleSoft Purchasing and passed to PeopleSoft Inventory where the items are shipped oradjusted.

Using the Pegging Workbench, a material stock request can be pegged to a requisition or purchaseorder.

PeopleSoft Mobile Inventory Management

This application provides tools to integrate mobile devices to the PeopleSoft Supply Chain Managementsystem. Oracle Application Development Framework Mobile (ADF Mobile) is used along with the PeopleSoftIntegration Broker and PeopleSoft Web Services to process inventory information using mobile devices, suchas bar code readers, and send the information back to PeopleSoft Inventory. Using Mobile InventoryManagement, you can use mobile devices to:

Check the stock quantities of items within a PeopleSoft Inventory business unit. This includes thestock quantities within material storage locations of a business unit

Page 5: PeopleSoft Enterprise Inventory 9.1

Conduct periodic inventory counts to determine replenishment needs for each par location.

Perform guided counts, counts by location, counts by item, and manual counts based on eventscreated in PeopleSoft Inventory.

Perform express issues for internal orders and reserve, pick, and ship the stock.

PeopleSoft eProcurement

You can send a PeopleSoft eProcurement requisition to PeopleSoft Inventory as a material stockrequest if stock is available.

If stock is not available, you can add the requisition to a purchase order and dispatch it to a vendorusing PeopleSoft Purchasing.

Using PeopleSoft eProcurement online pages, you can call the directed putaway feature in PeopleSoftInventory.

PeopleSoft Manufacturing

To create a bill of materials (BOM) or an item routing, PeopleSoft Manufacturing retrieves approvedinventory items, item groups, and item families.

PeopleSoft Manufacturing assigns work in progress (WIP) locations to work centers using the materialstorage locations defined in PeopleSoft Inventory.

PeopleSoft Manufacturing reserves stock (components) for picking in the PeopleSoft Inventorybusiness unit in preparation for releasing the material to the shop floor.

PeopleSoft Manufacturing moves raw materials and subassemblies from inventory storage locations toWIP locations or directly to production.

After the make item is produced, completions are recorded and the item is put away in PeopleSoftInventory.

Using PeopleSoft Manufacturing online pages, you can call the directed putaway feature in PeopleSoftInventory.

Using the Pegging Workbench, a material stock request (demand) can be pegged to a production ID(supply) when the Manufacturing business unit is the same as the Ship From inventory business unit.

You can only peg to the primary output of a production ID.

PeopleSoft Cost Management

PeopleSoft Cost Management calculates the cost and creates the accounting entries to recordputaways, shipments, adjustments, and other material movements in PeopleSoft Inventory.

PeopleSoft Cost Management receives costing information from PeopleSoft Purchasing, PeopleSoftPayables, and PeopleSoft Manufacturing to record and update the cost of stock in each PeopleSoftInventory business unit.

The accounting entries are then passed to the general ledger to record the accounting impact ofPeopleSoft Inventory transactions.

The Landed Cost Extraction process in PeopleSoft Payables can pass cost adjustments to PeopleSoftCost Management for the stock putaway in PeopleSoft Inventory.

PeopleSoft General Ledger

Accounting entries recording the activity in PeopleSoft Inventory are retrieved from PeopleSoft CostManagement and are used as input to create journal entries that are posted in the PeopleSoft General Ledgerbusiness unit tied to the PeopleSoft Inventory business unit.

PeopleSoft Commitment Control

Page 6: PeopleSoft Enterprise Inventory 9.1

A requisition or purchase order is entered in PeopleSoft Purchasing using commitment control and apre-encumbrance or encumbrance is established.

If the purchase order is sourced from PeopleSoft Inventory, then the encumbrance is relieved andreplaced with a expenditure against the budget when the Accounting Line Creation process inPeopleSoft Cost Management is run with the Budget Check Accounting Lines check box selected torun the Commitment Control Budget Processor.

An expenditure is recorded in the budget when a material stock request is created and stock is issuedfrom PeopleSoft Inventory using a ChartField combination set up as a budgetary account forcommitment control.

The deduction to the budget occurs when you run the Accounting Line Creation process in PeopleSoftCost Management with the Budget Check Accounting Lines check box selected. No pre-encumbranceor encumbrance is created or relieved.

PeopleSoft Payables

When a consigned item is consumed using any one of various transactions in PeopleSoft Inventory orPeopleSoft Manufacturing, ownership of the item is transferred from the vendor to the business.

The Transaction Costing and Accounting Line Creation processes in PeopleSoft Cost Managementmake consignment information available to PeopleSoft Payables for voucher creation.

For intercompany transfers, the destination PeopleSoft Inventory business units are defined ascustomers in the PeopleSoft customer tables, enabling the system to create an invoice in PeopleSoftBilling for each intercompany transfer and to load the invoice as a voucher into the PeopleSoftPayables business unit linked to the destination PeopleSoft Inventory business unit.

The Landed Cost Extraction process in PeopleSoft Payables can pass cost adjustments to PeopleSoftCost Management for the stock putaway in PeopleSoft Inventory.

PeopleSoft Billing

When shipping stock for a interunit transfer or a sales order from PeopleSoft Order Management, theDeplete On Hand Qty process (also referred to as the Depletion process) marks the orders as availablefor processing in PeopleSoft Billing.

The net price, from PeopleSoft Order Management, can be passed from PeopleSoft Inventory toPeopleSoft Billing for invoice creation, or detailed pricing can be passed using miscellaneous chargecodes, including discounts, surcharges, freight, taxes, and value-added tax (VAT).

Sales and excise taxes on a shipping excise invoice for India are passed to PeopleSoft Billing.

For intercompany transfers (stock transfers between two PeopleSoft Inventory business units reportingto different general ledger units), the system creates an invoice in PeopleSoft Billing for eachintercompany transfer and loads the invoice as a voucher into the PeopleSoft Payables business unitlinked to the destination PeopleSoft Inventory business unit.

For returned materials, PeopleSoft Inventory passes data to PeopleSoft Billing to create credit memosfor Returned Material Authorizations (RMAs).

The Direct Invoicing option can be used to automatically create PeopleSoft Billing invoices toaccompany your shipments.

PeopleSoft Inventory Policy Planning

PeopleSoft Inventory Policy Planning retrieves item information, locations, and shipping informationfrom PeopleSoft Inventory to be used in generating safety stock and replenishment options.

Use the Publish Inventory Policy process in PeopleSoft Inventory Policy Planning to send approvedand ready-to-use safety stock and replenishment options to PeopleSoft Inventory.

PeopleSoft Project Costing

Page 7: PeopleSoft Enterprise Inventory 9.1

When creating a material stock request, you can enter information to be used by PeopleSoft ProjectCosting.

PeopleSoft Project Costing retrieves project-related inventory shipments, returns, and putaways tocreate resource transactions.

PeopleSoft Quality

PeopleSoft Quality accesses approved inventory items to define quality control steps.

If a customer returns stock and a RMA form is produced, information can be entered about quality thatis passed to PeopleSoft Quality for analysis.

PeopleSoft Demand Planning

PeopleSoft Demand Planning retrieves item and shipping information from PeopleSoft Inventory to generateforecasts used to manage the item levels within PeopleSoft Inventory. After developing a satisfactory forecast,the forecast can be fed to PeopleSoft Inventory Policy Planning or can be fed back into PeopleSoft Inventory,where it can be used to drive the creation of automated inventory replenishment policy.

PeopleSoft Promotions Management

PeopleSoft Promotions Management uses the shipment information in PeopleSoft Inventory from sales ordersusing promotions to:

Determine what promotional liabilities that you owe your customers and then create general ledgeraccrual transactions for that incurred liability.

Determine fund budget amounts for funds associated with one of the accrual (rolling, zero-based, andfixed) funding methods.

These funds are then associated with customer promotions or national allowances.

PeopleSoft Engineering

PeopleSoft Engineering retrieves item information from PeopleSoft Inventory for the engineering workbenchenvironment to help you manage product introduction and change processes throughout your enterprise.

PeopleSoft Product Configurator

When putting away an item from PeopleSoft Manufacturing that is configured using PeopleSoft ProductConfigurator, the item is stored in PeopleSoft Inventory using a lot ID and a configuration code.

If you have turned on the Lot Allocation workflow in PeopleSoft Inventory, then the Complete Putawayprocess creates a worklist entry to inform users that the configured item is completed and put away ininventory.

The process also transfers the user to the Allocate Lots page.

PeopleSoft Maintenance Management

PeopleSoft Maintenance Management uses work orders to maintain and repair the capital assets of yourorganization, such as heavy machinery and buildings. The maintenance and repair of an asset may requireparts from Inventory. PeopleSoft Inventory is integrated with PeopleSoft Maintenance Management to fulfillparts for work orders as follows:

PeopleSoft Maintenance Management retrieves item information and stock availability from PeopleSoftInventory.

Using information from PeopleSoft Inventory, users within Maintenance Management can launch aninquiry page to display stock availability at a specific date and also print the Material Readiness reportto analyze material availability. Using these features, you can determine if the needed quantity isavailable on the work order line's scheduled date. If the quantity is not available on the scheduled date,you can determine the reasons for the shortage and how much quantity is available on future dates.

From the work order in PeopleSoft Maintenance Management, users can commit work orders to

Page 8: PeopleSoft Enterprise Inventory 9.1

PeopleSoft Inventory's demand fulfillment (IN_DEMAND) table allowing the demand to be displayed inthe Product/Item Availability page and used by the Create Replenishment Requests process.

From the work order in PeopleSoft Maintenance Management, users can soft-reserve stock inPeopleSoft Inventory to fulfill a work order.

The necessary items needed to complete a work order can be committed, soft-reserved, or hard-allocated by creating a pick list in PeopleSoft Inventory.

The Reserve Materials process in PeopleSoft Inventory can also be used to commit or soft-reservestock to the work order line. In addition, the Shortage Workbench can be used to reserve or unreserveinventory stock to a work order line.

Picking results are entering in PeopleSoft Inventory, with or without a pick list and the work orders arefulfilled.

Once work is completed, any unused material is returned to the PeopleSoft Inventory business unit.

The necessary items can be maintained at optimal levels in the PeopleSoft Inventory business unit byusing the replenishment feature.

Using the Pegging Workbench, a work order can be pegged to incoming supply from an interunittransfer (PeopleSoft Inventory), a requisition, or a purchase order (PeopleSoft Purchasing).

You cannot peg a work order to a production order in PeopleSoft Manufacturing. An interunit transfer isa material stock request to transfer stock between inventory business units. The interunit transfer'sdestination business unit must match the work order's inventory business unit used to fulfill parts.When the parts are received into the PeopleSoft Inventory business unit, the stock quantity can besoft-reserved or hard-allocated to the work order line.

We cover detailed integration considerations in the implementation chapters in this PeopleBook.

Integration Outside PeopleSoft Financials and PeopleSoft SCM

PeopleSoft Inventory also integrates with these PeopleSoft applications and third-party applications:

PeopleSoft CRM FieldService

PeopleSoft FieldService manages service requests for customers, technicians, call center agents, and third-party service providers. PeopleSoft FieldService performs material management functions and real-time itembalance and availability checks by integrating with PeopleSoft Inventory.

Define business units in PeopleSoft Inventory for storage locations in your field service trucks. These truckinventory business units should be separate from the inventory business units that represent your distributionwarehouses. As the integration is designed, stock requested on orders that are initiated from a field servicetruck and fulfilled from inventory stores is transferred to the truck with an interunit transfer. This integrationdesign assumes that the truck stock storage location is in a different business unit than the stock used tofulfill the material order. There is also integration for inventory adjustments and RMAs.

Warehouse management systems

PeopleSoft Inventory provides Enterprise Integration Points (EIPs) for integrating with third-party warehousemanagement systems (WMS) in order to streamline the order-to-cash and procure-to-pay businessprocesses. All material movement transactions for inventory occur within the WMS with EIPs exchangingdata between PeopleSoft Inventory and the WMS. One WMS installation corresponds to one PeopleSoftInventory business unit. When defining the PeopleSoft Inventory business unit in the PeopleSoft system,specify that the business unit is under external warehouse control on the Inventory Definition - Business UnitOptions page.

The PeopleSoft system does not need to track on-hand quantity balances at the storage location levelbecause all material movement transactions occur within the WMS. All static information, such as customer,vendor, carrier, and item information, is maintained in the PeopleSoft system and updates are sent to theWMS when new information is added or changes are made to existing information. Changes made to this

Page 9: PeopleSoft Enterprise Inventory 9.1

information within the WMS are not sent back to the PeopleSoft system.

Transportation management systems

PeopleSoft Inventory provides EIPs for integrating with third-party transportation management systems (TMS)in order to maximize space utilization of loads and thereby minimize the costs of shipping goods. The TMSEIPs send demand information from materials stock requests and sales orders to the TMS system whereoptimal loads are determined. A TMS EIP then uploads into PeopleSoft Inventory the carriers, loads, anddates based on optimization rules that takes place within the TMS.

Point-of-use systems

You can integrate PeopleSoft Inventory par location functionality with Point-of-Use (POU) supplier systems.This integration consists of EIPs, using PeopleSoft Application Messaging publish and subscribe technologyto exchange applicable par location, item counts, and expected receipt information between the PeopleSoftsystem and the POU supplier.

Rather than setting up POU suppliers as PeopleSoft Inventory business units, you can set up the system totrack POU suppliers as par locations within PeopleSoft Inventory. In this case, par location replenishmentrules are applied to items based on counts fed electronically from these systems generating replenishmentrequirements in PeopleSoft Inventory or PeopleSoft Purchasing.

EDI transactions

PeopleSoft provides many widely used industry standard EDI transactions. These application messages andsome of the other objects used to support messaging are delivered inactive so that they do not have to betouched if not used. You must activate them if a message is to be used.

See Processing Electronic Data Interchange Transactions in PeopleSoft Inventory.

Supplemental information about third-party application integrations is located on the My Oracle Support website.

PeopleSoft SCM Inventory Implementation

PeopleSoft Setup Manager enables you to review a list of setup tasks for your organization for the products that youare implementing. The setup tasks include the components that you must set up, listed in the order in which youmust enter data into the component tables, and links to the corresponding PeopleBook documentation.

PeopleSoft Inventory also provides component interfaces to help you load data from your existing system intoPeopleSoft Inventory tables. Use the Excel to Component Interface utility with the component interfaces to populatethe tables.

This table lists all of the components that have component interfaces:

Component Component Interface Reference

Default Putaway Locations DEFAULT_LOCATION_CI See Assigning Default Putaway Locations.

Fixed Picking Locations FIXED_PICK_BINS_CI See Assigning Fixed Picking Locations.

Transfer Attributes Defaults TRANS_UNIT_INV_CI See Defining Transfer Attributes.

Transfer Attributes UNIT_TRANSFER_DEF_CI See Defining Transfer Attributes.

Storage Zone Codes ZONE_INV_CI See Establishing Putaway and PickingZones.

Master Item Load Component Integration IN_MST_ITM_XLS See Processing Enterprise Integration Points

Page 10: PeopleSoft Enterprise Inventory 9.1

(EIPs).

Master Item Vendor Load Component IN_VND_ITM_XLS See Processing Enterprise Integration Points(EIPs).

Item Groups INV_ITEM_GROUPS_CI See Assigning Items to Groups.

Stocking Periods STOCK_PERIOD_CI See Defining Stocking Periods.

Units of Measure INV_ITEM_UOM_CI See Assigning a UOM to an Item.

Storage Locations STOR_LOCATIONS_CI See Defining and Maintaining MaterialStorage Locations.

Issue to Work Orders IN_WO_ISSUES_CI See Integrating Work Orders with a MobileDevice.

PeopleSoft Events and Notifications Framework

As your organization processes the continuous stream of transactions within your PeopleSoft system, the eventsand notifications framework enables you to monitor the transaction flow and alert your organization to any errors,changes, and stalled transactions. The messages generated by the events and notifications framework can notifyyou of the problem, give you a detailed description of the issue, and provide a link to the PeopleSoft page where youcan resolve it. One of the ways to use the events and notifications framework is to create PeopleSoft Queries on oneor more PeopleSoft tables, add the alert using the Alert Setup component, and then complete the alert setup steps.This method enables you to monitor data within a PeopleSoft table; for example, searching for stalled transactions,instead of looking at the results of a PeopleSoft process. When the Alerts process (EOEN_ALERT) is run, thePeopleSoft table is queried and the alert messages can be generated. These messages can be routed to theappropriate person (PeopleSoft user or non-PeopleSoft user) using an email, a PeopleSoft worklist entry, an XMLmessage, or the PeopleSoft Notification Dashboard.

For the PeopleSoft Inventory application, sample data includes the following PeopleSoft queries that have been setupto work with the events and notifications framework. These queries may require minor modifications to work in yourenvironment. You can also copy and alter these queries to create new alert messages.

Query ProcessName

Process Category Description

INV_BCT_ERRORS IN_ALERTS IN_BCT_ERROR Query the BCT staging tables andgenerate alert messages for thefollowing inventory transactions that arein error:

005 Physical Inventory

011 Interunit Receiving

012 Inventory Adjustments

013 Par Location Count

090 VMI Quantity On Hand

091 VMI Inventory Adjustment

110 Inventory Picking Feedback

120 Inventory Putaway Feedback

130 Inventory Transfers

Page 11: PeopleSoft Enterprise Inventory 9.1

140 Ship Containers/Serial ID's

150 Transportation Mgmt System

160 Create Stock Request

161 Request to Reserve

162 Request to Release

163 Request Picking Feedback

164 Request to Pick Confirm

165 Request to Ship (front-end)

166 Request to Ship

180 Freight

INV_BCT_UNPROCESS IN_ALERTS IN_BCT_UNPROCESS Query the BCT staging tables andgenerate alert messages for thefollowing inventory transactions thathave not been processed for more than120 minutes:

005 Physical Inventory

011 Interunit Receiving

012 Inventory Adjustments

013 Par Location Count

090 VMI Quantity On Hand

091 VMI Inventory Adjustment

110 Inventory Picking Feedback

120 Inventory Putaway Feedback

130 Inventory Transfers

140 Ship Containers/Serial ID's

150 Transportation Mgmt System

160 Create Stock Request

161 Request to Reserve

162 Request to Release

163 Request Picking Feedback

164 Request to Pick Confirm

165 Request to Ship (front-end)

166 Request to Ship

180 Freight

Note. The number of minutes can bechanged by modifying the query.

INV_FAILED_PUTAWAY IN_ALERTS IN_FAILED_PUTAWAY Generates alert messages for putawaytransactions that are in error or have notbeen processed for more than one day.

Note. The time period can bechanged by modifying the query.

Page 12: PeopleSoft Enterprise Inventory 9.1

INV_TRNSFR_ORD_NOT_RECD IN_ALERTS IN_TRANSFER_ORDER_NOT_RECD Generates alert messages for interunittransfer orders that are past theirscheduled arrival dates and have astatus of In Transit, Open, or Picked.

See PeopleSoft Events and Notifications Framework 9.1 PeopleBook

Other Sources of Information

In the planning phase of your implementation, take advantage of all PeopleSoft sources of information, including theinstallation guides, table-loading sequences, data models, and business process maps. A complete list of theseresources appears in the preface in the PeopleSoft Enterprise Applications Fundamentals 9.1 PeopleBook withinformation about where to find the most current version of each.

See Also

PeopleSoft Enterprise Application Fundamentals PeopleBook Preface

Enterprise PeopleTools PeopleBook: PeopleSoft Setup Manager

Enterprise PeopleTools PeopleBook: PeopleSoft Component Interfaces

PeopleSoft Enterprise Inventory 9.1 PeopleBook Copyright © 1992, 2011, Oracle and/or its aff iliates. All rights reserved.