Passion Colour catalogo Ok - Sirca S.p.A. · colours included in the most common colour charts, RAL, RAL Design, NCS and Munsell. ... Passion Colour catalogo Ok 7-08-2014 10:23 Pagina

COLOUR PASSION SYSTEM

Passion Colour catalogo Ok 7-08-2014 10:22 Pagina 1

COLOUR PASSION SYSTEM

Colour Lab, Sirca's signature


INDEX

Colour Passion Tintometrical Systems

Spectrophotometers

Tintometers

HP Tintometrical System for Metal Coatings

HQ Tintometrical System for Wood Coatings

HP Tintometrical System for Wood Coatings

Formularies

Completion of a perfect workstation

Pag.

Pag.

Pag.

Pag.

Pag.

Pag.

Pag.

Pag.

06

08

10

12

14

15

16

18

03


Colour Passion tintometrical system

04

COLOURPASSIONSYSTEM

Spectrophotometers

Perfect colour matchingCustomised colours

High constancy of quality

1

Tintometers

Time and costs savingsHigh reproducibility

Fast and clean system to produce a pigmented

product

2

Weighing Systems

High accuracy and precisionProfessional instruments

Increased constancy of production batches

3

Mixing Systems

High efficiencyHigh professionality

4

Spray System

Quality controlColour checking and correction

5

Control Systems

Improved control qualityFine adjustments of a formula

6


Sirca Colour Passion tintometrical system is conceived andstructured to allow to final users or stores to reproduce a wide range of high qualitypigmented topcoats.Thanks to each component of the system, it is possible to reproduce accurately, quic-kly, easily and consistently colours included in commonly used colourcharts, like RAL,NCS, Pantone, Sikkens, etc. In this way it is possible to ensure high quality performances to the coatings, just ifthey came directly from production department of Sirca, leading company in woodcoatings market.All Sirca coatings and pigmented pastes are formulated and produced in our facilities, in Italy, this means that final quality and constancy of characteristics arechecked daily, in order to provide to the final user high quality coatings or customised ones.

This system can be applied successfully to:

05

Metal coatings

RUST PREVENTERS

PRIMERS AND SEALERS

PIGMENTED SELF SEALERS

MONOCOMPONENT ENAMELS (NITRO, ALKYD, CHLORINE RUBBER)

BICOMPONENT ENAMELS (POLYURETHANE, ACRYLIC, EPOXY)


06

MATT PIGMENTED POLYURETHANE TOPCOATS

HIGH GLOSS PIGMENTED POLYURETHANE TOPCOATS

WATER BASED MATT PIGMENTED TOPCOATS FOR EXTERIORS

SOLVENT BASED MATT PIGMENTED TOPCOATS FOR EXTERIORS

WATER BASED MATT PIGMENTED TOPCOATS FOR INTERIORS

WATER BASED MATT PIGMENTED BICOMPONENT TOPCOATS FOR INTERIORS

WATER BASED MATT PIGMENTED TOPCOATS FOR GLASS

DESIRED FINAL QUALITY AND REPRODUCIBILITY

PRODUCTIVITY

DAILY NUMBER OF COLOURS TO BE FORMULATED

ARTICLES QUANTITY TO BE PRODUCED

CUSTOMISED PRODUCTS REQUEST

In addition, customised colours can be formulated, that can be used in special painting cycles, like dual cure matt and high gloss topcoats, matt and high gloss acrylic ones and customised metal coatings

The correct choice of the Colour Passion system suitable for each production needhas to consider:

Wood coatings


So, it is possible to define the following macro cases:

1 2 3When the demand of

customised products and the

number of pigmented coatings

to be prepared is small, it is

suggested to opt for manual

system, composed by paper

formularies and wall stirring

mixer.

This system allows to reach

a good colour fidelity

considering the common

colour charts.

When the demand of customised products is smallbut the number of pigmentedcoatings to be prepared isnotable, it is suggested to opt for the automatic tintometer, that allows to prepare quickly a lacquer,thanks to the possibility ofdosing of atmost three pigmented pastes simultaneously.In this way the working

environment is better orderlyand healthy, and the saving in terms of production wastebecomes high.The tintometer is able todispense correctly the mixtureof needed pigmented pastesinto the proper pre-weighedconverter.

When the demand of

customised products and

the number of pigmented

coatings is high, it is

suggested to consider a

combined system, composed

by a spectrophotometer and

an automatic tintometer.

In this way it will be possible

to formulate, correct and

reproduce a wide variety of

different colours, which are

included in any kind of

colourchart or in special ones.

In addition, it is possible to

control and store any kind

of production batch, in order

to constantly keep under

control the production

process of these lacquers.

07


Software quality control and formulation / correction

Datacolor Match Pigment Plus 2.2(known vulgarly as mother software)

The software is composed by: Section 1 - Quality Control Section 2 - Formulation and correction Section 3 - Creation of a Colourfile

Spectrophotometers

Colour Passion system, therefore, is composed by two parts, a software and an har-dware, which integrate perfectly to provide the highest quality and reproducibility ofpigmented topcoats, both in matt and high gloss versions.

Economic tool bench (spectrophotometer with fixed area to be defined whenordering) Normally the standard SAV area is 9 mm.

Datacolor 110 spectrophotometer

Datacolor Match Pigment Plus WS 2.2(known vulgarly as daughter software)

The software is composed by: Section 1 - Quality Control Section 2 - Formulation and correction

DATACOLOR 110

08


Software quality control and formulation / correction Paint Color Master I

Main features of the software are:

• Formulation and correction

• Possibility to choose the substrate considering clear cycles

• Automatic dispensers interface (CPS, TECMEC, INKMACHER)

• Quality control

Light, compact and portable tool, easy to read and use. Wide liquid crystals display(spectrophotometer with fixed area to be defined when ordering). Normally the standard DAV area is 8 mm.

XRite SP52 series spectrophotometer

It’s a compact and versatile wall mixer, able to stir each single pigmented paste of the tintometrical system. It’s a perfect solution when the number of lacquers prepareddaily is limited, so it’s therefore preferable to prepare themmanually. Sturdy and resistant, it’s easy to assemble andclean, thanks to the material used (zinc-aluminium alloy). It allows to stir at the same time up to 35 pigmented pastes,in 3,5 kg packs. It’s possible to stir even 1 kg pack. The footprint depends by the desired configuration.

Sirca will provide the needed colour files to reproduce thecolours included in the most common colour charts, RAL,RAL Design, NCS and Munsell.

Wall mixing machine FLEXIMIX 100

XRite SP52

FLEXIMIX 100

09


Software for configuration and production of pigmented products

CorobShop 4.15 and CorobTech 5.9

Main features of these softwares are:

• Manual or automatic calibration• Manual update of pigmented pastes volumes• Quick and easy set up basing to

the tintometrical system chosen• Editing and saving of any kind of formula• Costs control• Loading and dispensing of any formula saved

Tintometers

Compact and inexpensive to purchase and maintain, it is an ideal solution for Do-It-Yourself stores or similar environments where low to medium paint volumes aretinted.Easy to use, it can dispense quickly the needed pigmented pastes to save timeand decrease the waste of products. It’s provided with 16 canisters, 8 containing 4litres and 8 containing 6 litres, or 24 canisters, 12 containing 4 litres and 12 containing 6 litres. The maximum height of a can is 45 cm.The footprint needed depends by the configuration chosen, it goes from 74X94X136cm (sixteen canisters), to 102X94X136 cm (twenty-four canisters).The flow rate is 0,2 - 0,5 l/min.

COROB D300 automatic tintometer Pic. 1

COROB D300AUTOMATIC TINTOMETER

PIC. 1

10


Software for configuration and production of pigmented products

CorobShop 4.15 and CorobTech 5.9

Main features of these softwares are:

• Manual or automatic calibration• Manual update of pigmented pastes volumes• Quick and easy set up basing to

the tintometrical system chosen• Editing and saving of any kind of formula• Costs control• Loading and dispensing of any formula saved

Compact and inexpensive to purchase and maintain, it is an ideal solution for Do-It-Yourself stores or similar environments where low to medium paint volumes are tinted. Easy to use, it can dispense quickly the needed pigmented pastes to savetime and decrease the waste of products.It’s provided with16 canisters, 8 containing 1,5 litres and 8 containing 2,5 litres.The maximum height of a can is 37 cm.The footprint needed is 71X88X134 cm. The flow rate is 0,2 l/min.

Sirca will provide the needed database to reproduce all the colours included in ColorSirca chart. Other formulas can be recorded manually.

Computers & Accessories Each spectrophotometer and tintometer must be equipped with 1 PC or LapTop. The computer must be dedicated exclusively to the use of the proper instrument. The operating system Windows7 or Windows8 installed in every PC or laptop mustbe in English. The Keyboard /Mouse type must be English.

COROB D200 automatic tintometer Pic. 2

COROB D200AUTOMATIC TINTOMETER

PIC. 2

11


Tintometrical systems

Colour Passion HP - High Performances Metal Line

Colour Passion HP system allows to formulate, correct and reproduce metal coatingsof various nature, be them alkydic, epoxypolyamidic, acrylic or polyurethanic. This system is based on sixteen pigmented pastes, a neutral one and twenty-three different clear converters

12


Products obtained using this system are very easy to prepare, as it operates on predosed cans and equipped withtie lids; operators have only to open the can of the chosen converter, add the FBU pastes needed to match therequired colour following the formulations included in the CD or in the software of the mixing machine, and thenshake well.It is possible to reproduce all RAL and NCS colours included in ColorSirca and Colorsystem charts.In addition to the quickness of preparing the product, COLOUR PASSION HP system allows to realize exceptionalcoatings, suited to meet the most different demands of metal sector; effectively, it is possible to prepare productsfor industry, heavy carpentry, light carpentry, agricultural machinery, etc.

Acrylic semi-gloss high solid content clear converter for enamels

Acrylic high gloss high solid content clear converter for enamels

2K acrylic competitive clear converter for self sealers

2K acrylic clear converter for primers

2K acrylic clear converter for self sealers

2K tixotropic acrylic clear converter for self sealers

Alkyd clear converter for primers and rust preventers

Epoxypolyamidic clear converter for sealers

2K clear acrylic high gloss converter for enamels

2K clear acrylic converter orange peel effect for enamels

2K clear tixotropic acrylic converter orange peel effect for enamels

Alkyd clear matt converter for enamels

Alkyd clear semi-gloss converter for enamels

Alkyd clear high gloss converter for enamels

Clear PU matt converter for enamels

Clear PU semi-gloss converter for enamels

2K clear PU high gloss converter for enamels

2K clear epoxypolyamidic converter orange peel effect for enamels

2K clear epoxypolyamidic semi-gloss converter for enamels

2K clear epoxypolyamidic high gloss converter for enamels

Alkyd clear clorocaucciù matt converter for enamels

Alkyd clear clorocaucciù high gloss converter for enamels

Nitro clear converter for enamels

F011SE

F011SP

F300FF

F302PC

F303FF

F303TX

F311PC

F330PC

F400SP

F402BC

F402TX

F410OP

F410SE

F410SP

F420OP

F420SE

F420SP

F430BC

F430SE

F430SP

F444OP

F444SP

F436SP

Neutral paste

Oxide yellow paste

Orange paste

Oxide red paste

Violet oxide red paste

Blue paste

Green paste

Violet paste

White paste

Deep black paste

Cold yellow paste

Lemon yellow paste

Gold yellow paste

Magenta red paste

Scarlet red paste

Bright red paste

Black paste

FBU00

FBU01

FBU02

FBU03

FBU04

FBU05

FBU06

FBU07

FBU08

FBU09

FBU10

FBU11

FBU12

FBU13

FBU14

FBU15

FBU16

13


Colour Passion HQ – High Quality Wood Line

Colour Passion HQ system allows to formulate, correct and reproduce high qualitylacquers of different nature, be them solvent or water based. Basing to production and market needs, therefore, it possible to use the followingsystems:

Solvent based matt and high gloss pigmented productsFifteen pigmented pastes, two white bases and two clear ones

The pigmented topcoat achieved with the system mentioned above is characterisedby fast drying time, excellent coverage, smoothness and surface hardness. The final gloss level of a matt pigmented PU product depends by the gloss level ofthe converter used and the percentage of pigmented pastes added.This series of products can be applied successfully by spray (manual or automatic)and curtain coater. The full gloss pigmented topcoat achieved with this system is characterised by excel-lent surface hardness (it can be buffed very easily), excellent coverage and levellingand good reactivity. This series of products can be applied successfully by spray(manual or automatic) and curtain coater.

PU white paste

Lemon yellow PU paste

Sun yellow PU paste

Oxide yellow PU paste

Orange PU paste

Oxide red PU paste

Alfa blue PU paste

PPP30

PPP331

PPP332

PPP33

PPP335

PPP36

PPP139

Beta blue PU paste

Black PU paste

Bright red PU paste

Green PU paste

Dark red PU paste

Bordeaux PU paste

PPP39

PPP40

PPP142

PPP43

PPP45

PPP146

Violet PU paste

Magenta red PU paste

Matt white base

High gloss white base

Matt clear base

High gloss clear base

PPP48

PPP185

OPP530NI

LPP2530NC

CR45OOG

CR4072

14


Matt monocomponent white base for interior

Clear monocomponent matt base for interior

Clear bicomponent matt base for interior

Clear bicomponent embossed base for interior

Clear high gloss base for interior

White matt base for exterior

Clear matt base for exterior

White competitive matt base for exterior

Clear competitive matt base for exterior

Clear base specific for glass

OWPI530G

CRWM

CRWB

CRWG

IDROGLOSS

OWP230

WOP201

OWP030

WOP003

WETRO001

White paste

Cold lemon yellow paste

Cold sun yellow paste

Oxide yellow paste

Warm lemon yellow paste

Orange paste

Oxide red paste

Warm sun yellow paste

Ftalo blue paste

Deep black paste

Black paste

Bright red paste

Green paste

Bordeaux paste

Violet paste

Magenta red paste

PNW130

PNW131

PNW132

PNW133

PNW134

PNW135

PNW136

PNW137

PNW139

PNW140

PNW141

PNW142

PNW143

PNW146

PNW148

PNW185

Water based matt and high gloss pigmented products for interiors, water basedmatt pigmented products for exteriors and pigmented products specific for glassSixteen pigmented pastes, three white bases and seven clear ones

15


Colour Passion HP - High Performances Wood Line

Colour Passion HP allows to formulate, correct and reproduce matt and high glosslacquers, using an universal series of pastes:Solvent based matt and high gloss pigmented products Sixteen pigmented pastes, four white bases and two clear ones.

Oxide yellow paste

Orange paste

Oxide red paste

Violet oxide red paste

Blue paste

Green paste

Violet paste

White paste

FBU01

FBU02

FBU03

FBU04

FBU05

FBU06

FBU07

FBU08

Deep black paste

Cold yellow paste

Lemon yellow paste

Gold yellow paste

Magenta red paste

Scarlet red paste

Bright red paste

Black paste

FBU09

FBU10

FBU11

FBU12

FBU13

FBU14

FBU15

FBU16

Matt white base

High gloss white base

Matt clear base

High gloss clear base

White competitive matt base

White competitive high gloss base

OPP530NI

LPP2530NC

CR45OOG

CR4072

OPP053

LPP030

16


Sirca and Polistuc will provide the following formularies, in excel format, for each listedtintometrical system:

ColorSirca colour chart for Wood Line, high gloss and matt versions

Colorsystem colour chart chart for Metal and Wood Lines, high gloss and matt versions

Ral colour chart for Metal and Wood Lines, high gloss and matt versions

NCS colour chart for Wood and Metal Lines, high gloss and matt versions

Sirca Technical Support will be pleased to provide more detailed information referred toColour Passion tintometrical system and the technical support necessary for the selec-tion and installation of the system best suited to its production process, as well as thetechnical training of its dedicated staff.

Formular ies

17


Completion of a perfect workstation

Along with equipments above listed and described, to setup a perfect and professionalworkstation there are additional complementary equipments for weighing, properlymixing and applying wood and metal coatings, in order to formulate, produce, applyand correct easily and quickly an high gloss or matt pigmented product.

High precision scaleIt’s an high precision scale with load cell, characterised by a 0,01 gsensitivity, that is indispensable in a laboratory or colour centre, to produce small samples of stains or pigmented products for wood ormetal. Very easy to use and reliable, it allows to set the desired unit ofmeasurement. It can be connected to a computer or any other device. It works also with batteries. 5000 g maximum recommended load.

Semi-Industrial scaleIt’s an high precision electronic semi-industrial and laboratory scale withload cell, characterised by a 0,1 g sensitivity, that is indispensable in alaboratory or colour centre, to produce samples of stains or pigmentedproducts for wood or metal up to 30 kg.Very easy to use and reliable, it allows to set the desired unit of mea-surement. It can be connected to a computer or any other device. It works also with batteries. 30 kg maximum recommended load.

Industrial scaleIt’s an high precision electronic industrial scale with load cell, characte-rised by a 0,1 g sensitivity, that is indispensable in a laboratory orcolour centre, to produce samples of stains or pigmented products forwood or metal, up to 50 kg.Very easy to use and reliable, it allows to set the desired unit of mea-surement. It can be connected to a computer or any other device. Itworks also with batteries. 50 kg maximum recommended load.

Weighing systems

18


Gyroscopic mixer Clevermix 550

Mixing systems

Gyroscopic mixer Clevermix 550It is a self-closing and automatic gyroscopic stirrer,characterised by high mixing efficiency and ease of main-tenance, it presents a removable load plate and sturdyclosure of the loading area. It’s equipped with an intuitive control panel. Speedand stirring time functions are programmable.It can shake packs of different weights, starting fromone kilogram tins to 25 kg cans. The minimum height of the tin must be 8 cm, themaximum one of a can must be 47 cm. The footprint is equal to 80X79X101 cm.

The perfect and adequate mixing of pigmented pastes in a proper converter allows todeliver to the customer a perfectly matching pigmented product, in terms of colorimetric yield and correspondence to the desired required colour. The systems presented are highly professional and allow to achieve high quality standards.

Laboratory stirrer with stainless steel mixing tool

It’s a laboratory stirrer suitable for highly efficientmixing, homogenising and dissolving of fluid andviscous products. It’s suitable for mixing of pigmented pastes into theproper converter, it can dissolve or make uniform a solid-liquid system. It allows to work on any kind of coating product, inorder to achieve quickly what is desired. The engine, and thus the mixing tool, scroll up on achromed column, allowing to work on different packaging: changing properly the mixing tool, it’spossible to stir from one kilogram up to 30 kg samples.

19


Dry Spray BoothIt’s a cabin for spray applications, efficient and little bulky, which couldbe positioned in the laboratory or suitable facilities into a colour centre.It’s recommended when the paint quality has to be verified before delivery,including the colour checking. This booth is equipped with a suction system for the extraction offumes. The overspray is retained by suitable filters built up in thefrontal area, which can be cleaned and/or replaced easily and quickly.

Spray systems

GlossmeterA very useful tool in a laboratory or colour centre is the glossmeter, aninstrument which can effectively and precisely determine the glosslevel of any kind of topcoat. It’s easy to use, portable and lightweight.It allows to measure the gloss level with angles of 20°, 60° and 85°,depending on the desired accuracy of the measurement.

Colour evaluation chamberThe perception and visual evaluation of a colour is subjective andvaries with the illuminating light.When a spectrophotometer is not available or when a colour has to beevaluated visually, it’s possible to work using a bench colour evaluationchamber, characterised by a limited footprint.This instrument follows the current regulations of the industry, it allowsto evaluate, compare and analyse one or more colours (methamerismchecking).The chamber can be equipped with a 45° plate and presents fivedifferent light sources, which can simulate, for example, the daylight(D65) and neon lamp (F11). The footprint is equal to 71X40,5X57 cm.

Control systems

20


Sirca Technical Support will be pleased to provide more detailed information concerning the laboratory equipment described, in order to help the customer toproperly choose the most suitable equipment for its needs.

21




w w w . s i r c a . i t


Documents

Passion Colour catalogo Ok - Sirca S.p.A. · colours included in the most common colour charts, RAL, RAL Design, NCS and Munsell. ... Passion Colour catalogo Ok 7-08-2014 10:23 Pagina