Pasolink NEO Training20080219

© NEC Corporation 2006 20060713-PASOLINK NEO

PASOLINK NEO

NEC Corporation

Presentation: Yes

Submission: Yes

Page 2

20060713-PASOLINK NEO

1. Equipment Menu2. PASOLINK NEO

Main Features System Parameter Flexibility and Upgradeability Interface Card LAN Function Other New Technical Features

3. Network Management System 4. Roadmap5. Nodal Radio

CONTENTSCONTENTSPresentation: Yes

Submission: Yes

Page 3


Interface (NEO)– PDH : 5/10/20E1, 4PSK 5/10/20/40E1, 16QAM 48E1, 32QAM 1/2E3, 4PSK/16QAM– SDH : STM-1, 128QAM 2xSTM-1, 128QAM/XPIC– Ethernet : 10M/20M/40Mbps, 4PSK 10M/20M/40M/80Mbps, 16QAM 100Mbps, 32QAM 100M/50M or 75M/75Mbps, 128QAM

RF FrequencyNEO : L6/U6/7/8/10.5/11/13/15/18/23/26/28/32/38/52G

1.1. Equipment MenuEquipment Menu

Full Menu Coverage

Presentation: Yes

Submission: Yes

Page 4


0 3.5 7.0 14.0 28.0 40.0 56.0 [MHz] Adjacent CH Spacing

Modulation256QAM

128QAM

64QAM

32QAM

16QAM

8PSK

4PSK 5E1 10E1 20E1

5E1 10E1 20E1 40E1

100MB/48E1

STM-1XPIC

Equipment Menu (PASOLINK NEO)Equipment Menu (PASOLINK NEO)

PASOLINK NEO(Standard version)

Presentation: Yes

Submission: Yes

Page 5


Main Features– Common platform design (PDH, SDH, and LAN) V4 & Mx & PASO+(PDH) & PASO+(SDH) >> NEO (Same Equipment)– Bitrate Free (PDH to SDH) 10MB/ 20MB/ 40MB/ 80MB/ 100MB/ STM-1 (Same MODEM Unit)– Modulation Free (PDH to SDH) 4PSK(10-40MB)/ 16QAM(10-80MB)/ 32QAM(100MB)/ 128QAM(155MB)– Compact size/ Low power 1+0/1+1 @ 1U without FAN– Various Application (E1+LAN), (E3+E1), (4PLAN + E1), (STM-1), APS for STM-1(opt), XPIC etc. ...,– Bandwidth and Modulation Free ODU

Coverage from 5E1 to 2xSTM-1 or from 10M to 2x155Mbps.

2. NEO Standard2. NEO StandardPresentation: Yes

Submission: Yes

Page 6


System ParameterSystem ParameterFrequency band 6-8GHz 10-11GHz 13GHz 15GHz 18GHz 23GHz 26GHz 28GHz 32GHz 38GHz 52GHzRange(GHz) 5.925-8.5 10.15-11.7 12.75-13.25 14.2-15.35 17.7-19.7 21.2-23.6 24.25-27.0 27.5-29.5 31.8-33.4 37.0-40.0 51.4-52.6Tx power(dBm)

128QAM 25 21 21 21 19 19 18 18 17 14.5 32QAM 16QAM 26 21.5 22.5 22.5 22 22 20 18 17 14.5 4PSK 29 25 25 23 24 24 22 22 22 18 3

Receiver threshold(dBm) at 10-6 BER 156M/128Q -69.5 -68.5 -68.5 -69.0 -69.0 -69.0 -68.5 -68.5 -67.0 -67.0 -

100M/32Q -75.5 -74.5 -74.5 -75.0 -75.0 -75.0 -74.5 -74.5 -73.0 -73.0 - 80M/16Q -77.0 -76.0 -76.0 -76.5 -76.5 -76.5 -76.0 -76.0 -74.5 -74.5 - 40M/16Q -80.0 -79.0 -79.0 -79.5 -79.5 -79.5 -79.0 -79.0 -77.5 -77.5 -

20M/16Q -83.0 -82.0 -82.0 -82.5 -82.5 -82.5 -82.0 -82.0 -80.5 -80.5 - 10M/16Q -86.0 -85.0 -85.0 -85.5 -85.5 -85.5 -85.0 -85.0 -83.5 -83.5 -

40M/4PSK -84.0 -83.0 -83.0 -83.5 -83.5 -83.5 -83.0 -83.0 -81.5 -81.5 -78.020M/4PSK -87.0 -86.0 -86.0 -86.5 -86.5 -86.5 -86.0 -86.0 -84.5 -84.5 -81.010M/4PSK -90.0 -89.0 -89.0 -89.5 -89.5 -89.5 -89.0 -89.0 -87.5 -87.5 -84.0

System Gain(dB) at 10-6 BER 156M/128Q 94.5 89.5 89.5 90.0 88.0 88.0 86.5 86.5 84.0 81.5 -

100M/32Q 100.5 95.5 95.5 96.0 94.0 94.0 92.5 92.5 90.0 87.5 - 80M/16Q 103.0 97.5 98.5 99.0 98.5 98.5 96.0 94.0 91.5 89.0 - 40M/16Q 106.0 100.5 101.5 102.0 101.5 101.5 99.0 97.0 94.5 92.0 -

20M/16Q 109.0 103.5 104.5 105.0 104.5 104.5 102.0 100.0 97.5 95.0 - 10M/16Q 112.0 106.5 107.5 108.0 107.5 107.5 105.0 103.0 100.5 98.0 -

40M/4PSK 113.0 108.0 108.0 106.5 107.5 107.5 105.0 105.0 103.5 99.5 81.020M/4PSK 116.0 111.0 111.0 109.5 110.5 110.5 108.0 108.0 106.5 102.5 84.010M/4PSK 119.0 114.0 114.0 112.5 113.5 113.5 111.0 111.0 109.5 105.5 87.0

-

Presentation: Yes

Submission: Yes

Page 7


MD UNIT

INTFC Card

CTRL Card

1U

482x44x240mm, 4kg

170mm

170m

m

68.6mmWeight = 3kg

Bitrate Free: 5E1-48E1, STM-1/2xSTM-1Modulation Free: 4PSK,16/32/128QAMODU

• 1+0 / 1+1 @ 1U • Flexible interface (PDH, SDH, LAN) • Bitrate free (5E1 – STM-1)• Modulation free (4PSK, 16/32/128QAM)

IDU

Basic Equipment ConfigurationBasic Equipment ConfigurationPresentation: Yes

Submission: No

Page 8


NEO IDU

Interface Card

IDU FlexibilityIDU Flexibility

(16E1 INTFC e/w 2P LAN)

(48E1 INTFC)

(STM-1 Opt) (STM-1 Opt for APS)

(XPIC)

(LAN/WS INTFC for 2P LAN over 150M)

(STM-1 ELE) (LAN/WS INTFC)

(GbE INTFC over 150M)

(4P LAN INTFC)

(E3 INTFC)

+IDU

(2way DXC)

Presentation: Yes

Submission: Yes

Page 9


5E1(4P/16Q)

16E1(4P/16Q)

40E1(16Q)

STM-1(128Q)

STM-1/XPIC

System Upgrade System Upgrade ImageImage

5E1(10MB) 20E1(40MB) Key Upgrade

16E1(40MB) 40E1(80MB) Key Upgrade & Change Module

48E1(100MB) STM-1 Key Upgrade & Change Module

Add XPIC function Key & Another Equipment IDU

16E1 INTFC(Capacity limit=10M)



48E1(32Q)40E1(80MB) 48E1(100MB) Key Upgrade


STM-1 INTFC(Capacity limit=STM-1)


STM-1 1+1Add 1+1 function Key & Add MODEM Unit


Presentation: Yes

Submission: Yes

Page 10


1+0

1+1/HS

2Way DXCFor Repeater

Add MODEM Unit& Change INTF Module

1+01+1 Key Upgrade& Add MODEM Unit

Max.80Mbps Max.80Mbps

16E1 2Ether

HS

System Upgrade System Upgrade ImageImagePresentation: Yes

Submission: Yes

Page 11


E1 & LAN Setting E1 & LAN Setting (Ex.(Ex.16E116E1++2LAN 2LAN Card)Card)

10Mbps(5E1), 4P/16Q20Mbps(10E1), 4P/16Q40Mbps(20E1), 4P/16Q80Mbps(40E1), 16Q

4E18E1

16E1

2Ether10/20/40/80Mbps

Air Capacity

16E1+2LAN Card

1+0/1+1

80Mbps40Mbps20Mbps10MbpsSystem 2PLAN (Mbps)E1Mod.

10-00-54P/16Q20-00-104P/16Q40-00-16-204P/16Q80-00-16-20-4016Q

0

10

20

30

40

50

60

70

80

90

0 4 8 12 16

Number of E1

Thro

ughp

ut(M

bps)

80Mbps

40Mbps

20Mbps

10Mbps

The above specification is for "LAN shared mode."

Presentation: Yes

Submission: Yes

Page 12


E1 Setting E1 Setting (Ex. (Ex. 48E1 48E1 Card)Card)

16E1

48E1 Card

1+0/1+1 16E1 16E1

System Capacity, Modulation

2 5E1, 4PSK/16QAM 3 10E1, 4PSK/16QAM

20E1, 4PSK/16QAM5

MDR(16E1) D-Sub(2x8E1)Conversion Card

Presentation: Yes

Submission: Yes

Page 13


Interface Card Summary (1)Interface Card Summary (1)

Interface Card E1 LAN Total Capacity16E1 INTFC D-sub37 x2 RJ-45x2 10-80MB48E1 INTFC MDR68 x3 N.A. 10-100MB4P LAN INTFC N/A RJ-45x4 100MB2way DXC INTFC

D-sub37 x2 RJ-45x2 10-80MB

Interface Card E3 WS-E1 WS/SC-LAN*

Total Capacity

E3 INTFC IEC-min D-sub37 x1

RJ-45 x2 40MB(1xE3 & 4xE1)80MB(2xE3 & 8xE1)*

PDH E1

PDH E3

*WS/WS-LAN and 2xE3 will be available by downloading F/W and FPGA.

Presentation: Yes

Submission: Yes

Page 14


Interface Card MAIN WS(E1) CapacitySTM-1 INTFC (ELE)

IEC-min N/A STM-1

STM-1 INTFC (OPT)

LC N/A STM-1

GbE INTFC LC/RJ-45 N/A 150MBLAN/WS INTFC

Main RJ-45 x2 N/A 100MB+50MB75MB+75MB

Sub N/A RJ-45 x2D-sub37

64-256KB for SC-LANE1 for WS

SDH STM-1

Interface Card Summary (2)Interface Card Summary (2) Presentation: Yes

Submission: Yes

Page 15


LAN Function SummaryLAN Function SummaryInterface Card 16E1 INTFC 4P LAN INTFC LAN/WS INTFC GbE INTFC 2way DXC

Interface 10BASE-T100BASE-TX

10BASE-T100BASE-TX

10BASE-T100BASE-TX

1000BASE-SX1000BASE-T

10BASE-T100BASE-TX

Number of LAN Port 2 (RJ-45 x 2) 4 (RJ-45 x 4) 2 (RJ-45 x 2) 1 (SFP or RJ-45) 2 (RJ-45 x 2)

Supported Capacity PDH (10M~80M) PDH (100M) SDH (155M) SDH (155M) PDH (10M~80M)

Maximum Throughput 80Mbps (Main)256Kbps (SC)

100Mbps (Main)256Kbps (SC)

150Mbps (Main)256Kbps (SC)2Mbps (WS/SC)



Maximum Frame Length 1548 bytes *1 1548 bytes *1 1548 bytes *1 9600 bytes 1548 bytes *1

RMON O O O O O

VLAN F F F X X

2WAY DXC X X X X O

* 1 When VLAN is enabled, maximum frame length is limited to 1522 bytes.

O: Supported X: Not Available F: Future Plan -: No Plan "Future plan function" will be available by downloading F/W and/or FPGA.

Presentation: Yes

Submission: Yes

Page 16


Other New Technical FeaturesOther New Technical FeaturesMemory Card (option)

Equipment Configuration parameter data can be stored. FPGA re-configurable data can be stored using LCT/PNMT. The release of RSL/Fading data storing function is under plan.

MemoryCard

Insert

• Equipment configuration parameter data• FPGA re-configurable data

Control Card

Presentation: Yes

Submission: Yes

Page 17


PNMS

NMS port

(LAN)

CTRL

SWHUB

PASOLINK-NEO

SV line

Current NEC radio(PASO, PASO+ etc.)

...

B-B port (LAN)

Other vender's

NMS

ASYNC

SV line can be commonly used for NEO and other vender’s systems.

LAN SV Line (384kbps)LAN SV Line (384kbps)

NEO

NEO

Other vender's System

Presentation: Yes

Submission: Yes

Page 18


AnyPlatform! Java version PNMS can run on either Windows or Solaris.

AnyClient!Provision of the multi-user environment (up to 15 clients)

AnyEquipment!Support all of NEC’s Access Radio equipment.

(PASOLINK V3/V4, PASOLINK+, PASOLINK Mx PASOLINK NEO, NEO 5000S)

Auto Discovery!PNMSj finds new NEs automatically.

3. Network Management System3. Network Management System

PNMSj Features

Presentation: Yes

Submission: Yes

Page 19


PNMSj NetworkPNMSj Network

PASOLINK+PASOLINK V3/V4PASOLINK Mx

NMS

PNMSj

SNMP

SNMP enables to monitorNEs by other NMS

•Network Map and Link Summary display

IDU

New Radio

PASOLINK NEO

NEO 5000SPNMS up-grades the software to monitor all the

PASOLINK family and New Radios (NEO/N+1).

MUX

BR

TR

MDBB

Presentation: Yes

Submission: Yes

© NEC Corporation 2006

Page 20


AppendixAppendix

Presentation: Yes

Submission: Yes

Page 21


Interface Card Specification (1)Interface Card Specification (1)

10M 20M 40M 80M 100M 156M

QPSK/16QAM 16QAM 32QAM 128QAM

O O O O X X

16E1 INTFC

Transmission Capacity & Modulation

Mapping Interface SpeedRMON VLAN

MAIN SC 10M 100M 1000M

O O O O X O F

LAN Specification

TERMINAL 2Way DXC (Fix) E1 Protection (SNCP)

O X X

System : PDH

•E1 x 16 Channels (D-Sub(37pin) x 2, 75/120 ohm S/W selectable)•10/100BASE-T(X) x 2 Ports (RJ-45 x 2, Auto-Negotiation / Auto-MDI/MDIX)•VLAN function will be available by downloading F/W and FPGA.


* When VLAN is enabled, maximum frame length is limited to 1522 bytes.

Presentation: Yes

Submission: No

Page 22


10M 20M 40M 80M 100M 156M


O O O O O X

48E1 INTFC


TERMINAL 2Way DXC (Async.) E1 Protection (SNCP)

O X X

System : PDH

•E1 x 48 Channels (MDR(68pin) x 3, 75/120 ohm S/W selectable)•LAN function is not available.

Interface Card Specification (2)Interface Card Specification (2)


Presentation: Yes

Submission: No

Page 23


10M 20M 40M 80M 100M 156M


X X O O X X

E3 INTFC



MAIN WS/SC 10M 100M 1000M

X F F F X - X

LAN Specification

TERMINAL 2Way DXC (Fix) E1 Protection (SNCP)

O X X

System : PDH

•E3 x 1/2 Channels (IEC-Mini, 75 ohm)•WS(E1) x 4/8 Channels (D-Sub(37pin), 75/120 ohm S/W selectable)•WS/WS-LAN function will be available by downloading F/W and FPGA.

Interface Card Specification(3)Interface Card Specification(3)


Presentation: Yes

Submission: No

Page 24


10M 20M 40M 80M 100M 156M


X - - - O X

4P LAN INTFC




O X O O X O F

LAN Specification

TERMINAL 2Way DXC (Async.) E1 Protection (SNCP)

O X X

System : PDH

•E1 x 4 Channels (D-Sub(37pin) x 1, 75/120 ohm S/W selectable)•10/100BASE-T(X) x 4 Ports (RJ-45 x 4, Auto-Negotiation / Auto-MDI/MDIX)•VLAN function will be available by downloading F/W and FPGA.

* When VLAN is enabled, maximum frame length is limited to 1522 bytes.



Presentation: Yes

Submission: No

Page 25


10M 20M 40M 80M 100M 156M


O O O O X X

2Way DXC (Fix) INTFC



MAIN SC 10M 100M 1000M

O O O O X O X

LAN Specification

TERMINAL 2Way DXC (Async.) SNCP

O O X

System : PDH

•E1 x 16 Channels (D-Sub(37pin) x 2, 75/120 ohm S/W selectable)•10/100BASE-T(X) x 2 Ports (RJ-45 x 2, Auto-Negotiation / Auto-MDI/MDIX)•Fixed 2Way DXC Function



Presentation: Yes

Submission: No

Page 26


10M 20M 40M 80M 100M 156M


X X X X X O

STM-1 INTFC (OPT)


TERMINAL 2Way APS

O X O

System : SDH

•STM-1(OPT) x 1 Channel (S-1.1 / L-1.1 SFP module selectable, LC optical connector)•APS function will be available by downloading F/W.

* S-1.1 or L-1.1 module can be selected , only when shipping it.



Presentation: Yes

Submission: No

Page 27


10M 20M 40M 80M 100M 156M


X X X X X O

STM-1 INTFC (ELE)


TERMINAL 2Way APS

O X X

System : SDH

•STM-1(ELE) x 1 Channel (75 ohm CMI, IEC-Mini connector)



Presentation: Yes

Submission: No

Page 28


10M 20M 40M 80M 100M 156M


X X X X X O

LAN/WS INTFC




O O O O X O F

LAN Specification

TERMINAL 2Way APS

O X X

System : SDH

•10/100BASE-T(X) x 2 Ports (RJ-45 x 2, Auto-Negotiation / Auto-MDI/MDIX)•WS(E1) x 1 Channels (D-Sub(9pin) x 1, 75/120 ohm S/W selectable)•Main LAN function will be enabled if mounted in "Main slot", and•WS/WS LAN function will be enabled if mounted in "Sub slot".•VLAN function will be available by downloading F/W and FPGA.

* WS(E1) and LAN are exclusive use. * When VLAN is enabled, maximum frame length is limited to 1522 bytes.



Presentation: Yes

Submission: No

Page 29


10M 20M 40M 80M 100M 156M


X X X X X O

GbE INTFC




O X X X O O X

LAN Specification

TERMINAL 2Way SNCP

O X X

System : SDH

•1000BASE-SX (SFP) / 1000BASE-T (RJ-45) x 1 Port

* 1000BASE-SX or 1000BASE-T can be selected , only when shipping it.



Presentation: Yes

Submission: No

Page 30


Documents

Pasolink NEO Training20080219