Paragon - Marabu Scandinavia · ec Marabu Scandinavia Marabu Scandinavia is a wholly owned subsidiary of Ma-rabu GmbH & Co., ... Fluorescent 802c Green LMFLG802 Fluorescent 803c Yellow

Paragon

Product Guide 2017

Dec 2017

Marabu Scandinavia

Marabu Scandinavia is a wholly owned subsidiary of Ma-rabu GmbH & Co., one of the world ’s leading manufac-turer of printing inks for digital , screen and pad printing. Marabu Scandinavia has offices in Malmö, Stockholm , Gothenburg, Vejle, Oslo and Helsinki. Our philosophy is to be close to the customer to be able to help with service and expertise in digital , screen , pad and UV flexo. The majority of our customers are in industries where quality, excellence , and reliability are obvious ingredients of a relationship between customer and supplier. Therefore, we have built an organization with stock and service at seve-ral places in Scandinavia to quickly deliver an order. We have departments for color mixing, stretching and flat and cliché manufacture so that the customer can get supplies tailored to their individual needs without delay. Last but not least , a well-trained staff with extensive experience of these printing methods.

Sweden - Head Office Marabu Scandinavia AB+46 40 672 84 [email protected]

Sweden - StockholmMarabu Scandinavia AB+46 8 448 07 [email protected]

Sweden - GothenburgMarabu Scandinavia AB+46 40 672 84 [email protected]

Denmark - Vejle Marabu Scandinavia+45 70 10 00 [email protected]

Norway - OsloMarabu Scandinavia+47 22 73 50 [email protected],www.marabu.no

Finland - VantaaMarabu Scandinavia+358 9 279 85 [email protected],www.marabu.fi

Get in touch with Marabu Scandinavia

PRODUCT CONTENTS

Range Page

UV Flexo Luna Range 3

Uvdry Flexo Ultra L.M. Range 4

Information on Flexo Blacks 5

Information on UV Flexo Luna Titanium Whites 6

Information on UV Flexo ULM Titanium Whites 7

Information on UV Flexo Nestle Titanium Whites 8

Uvdry Flexo Lightfast Range 9

Uvdry Flexo Fluorescents Range 10

Flexo and LED Flexo 1-Pack Metallics 11

Flexo Scratch-Off Range and Flexo Additives 12

LED Flexo Range 13

Flexo Clearcoat Selector and Special Coatings Guide 14

Waterbased 4000 Range 15

Waterbased Additives and Waterbased Clearcoat Selector 16

Uvdry Letterpress Range 17

Uvdry Series 3000 Lightfast Range 18

Uvdry Letterpress Fluorescents Range 19

Letterpress 1-Pack Metallics and Letterpress Scratch-Off Range 20

Letterpress Additives 21

Letterpress Clearcoat Selector and Special Coatings Guide 22

Please note that this is not an exhaustive list of the products in our range. If youneed something that is not listed here please call us to discuss your requirements.

This guide is produced annually and is representative of our most up to dateproducts at the time of publishing.

3

UV FLEXO LUNA RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK Free)

4 Colour Process Set Standard Strong LitePantone Process Yellow YF0005 YF0007Pantone Process Magenta RF0005 RF0007 RF0015Pantone Process Cyan CF0005 CF0007 CF0015Pantone Process Black BF0005 BF0005

Base Colours CodePantone Yellow YF0001Mixing Orange YF0002Pantone 021 Orange YF0004Pantone Warm Red RF0002Pantone 032 Red RF0004Pantone Rubine RF0001Pantone Rhodamine RF0003Pantone Purple CF0003Pantone Violet VF0001Pantone 072 Blue CF0004Pantone Reflex Blue CF0002Pantone Dark Blue CF0006Pantone Process Blue CF0001Pantone Green GF0001Pantone Mixing / Untoned Black BF0002Tinting Meduim TF0001Opaque White WF0001

Contact Paragon for the Product Information Sheet, which containstechnical information and printing recommendations.

Recommended Gloss Lacquer for above inks:(See Clear Coat Selector for more information)

Flexo High Gloss Lacquer (Low Viscosity) L512Flexo Gloss Lacquer (Overprintable) L508

4

UVDRY FLEXO ULTRA LOW MIGRATORY RANGESwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

4 Colour Process Set Standard StrongUltra L.M. Process Yellow ULMYF6803 ULMYF6905Ultra L.M. Process Magenta ULMRF6805 ULMRF6905Ultra L.M. Process Cyan ULMCF6805 ULMCF6905Ultra L.M. Process Black ULMBF6807 ULMBF6907

Base Colours CodeUltra L.M. Yellow ULMYF6801Ultra L.M. Mixing Orange ULMYF6802Ultra L.M. 021 Orange ULMYF6804Ultra L.M. Warm Red ULMRF6802Ultra L.M. 032 Red ULMRF6804Ultra L.M. Rubine ULMRF6801Ultra L.M. Rhodamine ULMRF6803Ultra L.M. Purple ULMCF6803Ultra L.M. Violet ULMVF6801Ultra L.M. 072 Blue ULMCF6804Ultra L.M. Reflex Blue ULMCF6802Ultra L.M. Process Blue ULMCF6801Ultra L.M. Green ULMGF6801Ultra L.M. Mixing / Untoned Black ULMBF6802Ultra L.M. Tinting Meduim ULMTF6801Ultra L.M. Opaque White ULMWF6801



Ultra L.M. High Gloss Lacquer (Low Viscosity) ULML912Ultra L.M. Gloss Lacquer (Overprintable) ULML908

5

Additional Information on Flexo BlacksComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

Description Code Recommendations

UV Flexo LunaMixing /Untoned Black

BF0002Designed for use in colour matchings. It can also beused as a spot black but will be a browner, less bluefinish than the Jobbing or Dense Black.

Recommend aniloxes up to a volume of 9.0cm3/m2.

UV Flexo LunaProcess Black BF0005

Designed as a standard and strong black forprocess. Not to be used for solids at heavy volumesas cure is affected.

Recommend anilox volumes of 2.0 – 5.0cm3/m2.UvDry FlexoProcess/Jobbing Black LMBF9817

Designed as a standard black for process or solidblack printing. Can be used for solids at heaviervolumes.

Recommend aniloxes up to a volume of 9.0cm3/m2.

Additional Information on Flexo Ultra Low Migratory BlacksSwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

Description Code RecommendationsUvDry FlexoUltra L.M.Mixing/UntonedBlack

ULMBF6802Designed for use in colour matchings. It can also beused as a spot black but will be a browner, less bluefinish than the Jobbing or Dense Black.

Recommend aniloxes up to a volume of 9.0cm3/m2.UvDry FlexoUltra L.M.Process Black

ULMBF6807Designed as a standard black for process. Not to beused for solids at heavy volumes as cure is affected.

Recommend anilox volumes of 3.0 – 6.0cm3/m2.UvDry FlexoUltra L.M.Strong ProcessBlack

ULMBF6907

Designed as a strong black for process. Not to beused for solids at heavy volumes as cure is affected.

Recommend anilox volumes of 2.0 – 5.0cm3/m2.

UvDry FlexoUltra L.M.Process / JobbingBlack

ULMBF6817

Designed as a standard black for process or jobbingblack for printing solids.

Can be used for solids at heavier volumes.

Recommend anilox volumes of 7.0 – 9.0cm3/m2.

6

TITANIUM WHITE RANGE

UV FLEXO LUNA RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK Free)

Description Code RecommendationsUV Flexo LunaTitanium FirstDown White

W348W348 is a dedicated ink for first down print applications,on supported stocks.

Recommended anilox volumes of 10-30cm3/m2.UV Flexo LunaTitaniumFlexible FirstDown White

W347

W347 is a dedicated ink for first down print applications,where a flexible ink is required.

Recommended anilox volumes of 8-10cm3/m2.

UV Flexo LunaTitanium HotMelt LastDown White

W307

W307 is a dedicated ink for last down and reverse printapplications, such as shrink sleeves and wrap-around-labelling (WARL), when a hot melt adhesive is being appliedto the white ink to secure the decoration to the container.


UV Flexo LunaTitanium LastDown White

W334

W334 is a dedicated ink for last down and reverse printapplications, such as shrink sleeves and wrap-around-labelling (WARL).

Recommended anilox volumes of 8-10cm3/m2.UV Flexo LunaTitaniumLidding FirstDown White

W320

W320 is a dedicated ink for first down print applications,on to metal based lidding material.


7


UV FLEXO ULTRA LOW MIGRATORY RANGESwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

Description Code RecommendationsUV Flexo ULMTitanium FirstDown White

ULMW648ULMW648 is a dedicated low migration ink for firstdown print applications, on supported stocks.

Recommended anilox volumes of 10-30cm3/m2.UV Flexo ULMTitaniumFlexible FirstDown White

ULMW647ULMW647 is a dedicated low migration ink for firstdown print applications, where a flexible ink isrequired.

Recommended volumes of 8-10cm3/m2.

UV Flexo ULMTitanium HotMelt Last DownWhite

ULMW607

ULMW607 is a dedicated low migration ink for lastdown and reverse print applications, such as shrinksleeves and wrap-around-labelling (WARL) when a hotmelt adhesive is being applied to the white ink tosecure the decoration to the container.


UV Flexo ULMTitanium LastDown White

ULMW634

ULMW634 is a dedicated low migration ink for lastdown and reverse print applications, such as shrinksleeves and wrap-around-labelling (WARL).

Recommended volume of 8-10cm3/m2.UV Flexo ULMTitanium LiddingFirst DownWhite

ULMW620ULMW620 is a dedicated low migration ink for firstdown print applications on to metal based liddingmaterial.


8


UV FLEXO NESTLE COMPLIANT WHITESNestlé, Swiss Ordinance and EuPIA guidelines for indirect food packaging compliant

Description Code Recommendations

UV Flexo NestleTitanium FirstDown White

ULMW6948

ULMW6948 is a dedicated low migration ink, suitablefor first down print applications being printed forNestlé, on supported stocks.

Recommended anilox volumes of 10-30cm3/m2.UV Flexo NestleTitaniumFlexible FirstDown White

ULMW6947

ULMW6947 is a dedicated low migration ink, suitablefor first down print applications being printed forNestlé, where a flexible ink is required.


UV Flexo NestleTitanium HotMelt Last DownWhite

ULMW6907

ULMW6907 is a dedicated low migration ink for lastdown and reverse print applications being printed forNestlé, such as shrink sleeves and wrap-around-labelling (WARL), when a hot melt adhesive is beingapplied to the white ink to secure the decoration tothe container.


UV Flexo NestleTitanium LastDown White

ULMW6934

ULMW6934 is a dedicated low migration ink for lastdown and reverse print applications being printed forNestlé, such as shrink sleeves and wrap-around-labelling (WARL).

Recommended anilox volumes of 8-10cm3/m2.UV Flexo NestleTitanium LiddingFirst DownWhite

ULMW6920

ULMW6920 is a dedicated low migration ink, suitablefor first down print applications being printed forNestlé, on to metal based lidding material.


9

UVDRY FLEXO LIGHTFAST RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

4 Colour Process Set CodePantone Process Yellow LMYF7603Lightfast Process Magenta / Rubine LMR4095Pantone Process Cyan LMCF7605Pantone Process Black LMBF9805

Base Colours CodePantone Yellow LMYF9801Mixing Orange LMYF9802Lightfast 021 Orange LMY1961Lightfast Warm Red LMR3679Lightfast 032 Red LMR3624Lightfast Process Magenta / Rubine LMR4095Lightfast Rhodamine LMR1959Pantone Purple LMCF9803Lightfast Violet LMC3082Lightfast 072 Blue LMC4238Lightfast Reflex Blue LMC4765Pantone Process Blue LMCF7201Pantone Green LMGF9801Pantone Mixing / Untoned Black LMBF9802Tinting Meduim LMTF9801Opaque White LMWF9801




10

UVDRY FLEXO FLUORESCENT RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

Fluorescent CodeFluorescent 801c Blue LMFLC801Fluorescent 802c Green LMFLG802Fluorescent 803c Yellow LMFLY803Fluorescent 804c Orange LMFLY804Fluorescent 805c Red LMFLR805Fluorescent 806c Pink LMFLR806Fluorescent 807c Purple LMFLC807Fluorescent 808c Green LMFLG808Fluorescent 809c Yellow LMFLY809Fluorescent 810c Orange LMFLY810Fluorescent 811c Orange LMFLY811Fluorescent 812c Red LMFLR812Fluorescent 813c Pink LMFLR813Fluorescent 814c Purple LMFLC814

Shelf Life: 4 months

Printing FluorescentsFluorescent pigments, in general, are very weak in colourstrength compared to conventional ink systems however thisrange has been developed with increased strength to allowlower volume aniloxes to be used.

Fluorescent LightfastnessFluorescent colours are poor for lightfastness and areestimated at Blue wool Scale 1-2. We do not recommend thatthe printed examples of these colours be exposed to daylightconditions.

Contact Paragon for the Product Information Sheet, whichcontains further technical information and printingrecommendations

11

UVDRY FLEXO 1-PACK METALLICSComplies to the EuPIA Exclusion Policy

1 - Pack Metallics CodeFlexo 1-Pack 871c Gold 1941Flexo 1 Pack 872c Gold 1927Flexo 1-Pack 873c Gold 1928Flexo 1-Pack 874c Gold 1929Flexo 1-Pack 875c Gold 1930Flexo 1-Pack 876c Gold 1931Flexo New 1-Pack 877c Silver 1958Flexo 1-Pack 877c Silver 1960Flexo 1-Pack 877c Silver (Low Viscosity) 1950Flexo 1-Pack Bright Silver 1945Shelf Life: 6 months

UVDRY FLEXO 1-PACK METALLICSSwiss Ordinance and EuPIA guidelines for indirect food packaging compliant

1 - Pack Metallics CodeFlexo 1-Pack 871c Gold (FP) MET2071Flexo 1 Pack 872c Gold (FP) MET2072Flexo 1-Pack 873c Gold (FP) MET2073Flexo 1-Pack 874c Gold (FP) MET2074Flexo 1-Pack 875c Gold (FP) MET2075Flexo 1-Pack 877c Silver (FP) MET2077


LED FLEXO 1-PACK METALLICSComplies to the EuPIA Exclusion Policy

1 - Pack Metallics CodeLED Flexo 1-Pack 871c Gold MET2011LED Flexo 1 Pack 872c Gold MET2012LED Flexo 1-Pack 873c Gold MET2013LED Flexo 1-Pack 874c Gold MET2014LED Flexo 1-Pack 875c Gold MET2015LED Flexo 1-Pack 876c Gold MET2016LED Flexo 1-Pack 877c Silver MET2017LED Flexo 1-Pack Bright Silver MET2018


12

FLEXO SCRATCH-OFF RANGE(Please note this ink range contains Benzophenone)

Scratch-Off Metallic System CodeFlexo Scratch-off Base Lacquer L501Flexo Scratch-off Metallic Varnish MV830Flexo New Silver Paste 1957Flexo Dense Scratch-off Black B1828Flexo Scratch-off Overlacquer L574

Unmixed Shelf Life: 6 months. Mixed Shelf Life: 24 hours

Contact Paragon for the Product Information Sheet which contains technicalinformation and printing recommendations.

UV FLEXO ADDITIVES

Description Code DetailsLiquid Reducer AD105 Use as required to lower the viscosity and tack of inks

and varnishes.

Use to a maximum of 10%.Cure PromoterNot suitablefor foodpackaging(Colours only)

AD220 Used to improve the cure of coloured inks. Do not use inclear coatings, whites or tints.

An add of 2-3% should be sufficient.

Cure PromoterNot suitablefor foodpackaging

AD202 Used to improve the cure of whites, clear coatingsand tints.


Slip AdditiveSuitable for allranges

AD317 Used to improve the tape adhesion of inks or varnishes.

Do not use in systems intended for foil blocking,overprinting or gluing.

An add of 0.5-2.0% should be sufficient.

Add to subsequent colours used in the process fortrapping purposes.

LevellingAdditiveSuitable for allranges

AD325 Used to improve the lay of one ink on top of another.

Can be used to improve lay of the ink on difficultsubstrates.


An add of 0.5-2.0% should be sufficient.De-FoamerSuitable for allranges

AD321 Used to remove excess surface foam.

An add of 0.1-1.0% should be sufficient.

13

LED FLEXO RANGEComplies to the EuPIA Exclusion PolicyBespoke ink range designed for curing LED 395nm

4 Colour Process Set StrongLED Strong Process Yellow LEDYF105LED Strong Process Magenta LEDRF105LED Strong Process Cyan LEDCF105LED Strong Process Black LEDBF105

Base Colours CodeLED Yellow LEDYF101LED Mixing Orange LEDYF102LED 021 Orange LEDYF104LED Warm Red LEDRF102LED 032 Red LEDRF104LED Rubine LEDRF101LED Rhodamine LEDRF103LED Purple LEDCF103LED Violet LEDVF101LED 072 Blue LEDCF104LED Reflex Blue LEDCF102LED Process Blue LEDCF101LED Green LEDGF101LED Mixing / Untoned Black LEDBF102LED Tinting Medium LEDTF101

Please note this ink range contains Benzophenone



LED High Gloss Lacquer L1012LED Gloss Lacquer (Overprintable) L1008

14

FLEXO CLEARCOAT SELECTOR GUIDEKey Feature Finish Paper Filmic Chemi

ThermalBlocking Scuff

resistantCode ULM Code LED

Code

General PurposeGloss L512 ULML912 L1012Satin L520 ULML920Matt L618 ULML918

Thermal Transfer /Foil Blocking

Gloss L508 ULML908 L1008Satin L513 ULML913Matt L519 ULML919

Primer Gloss L523 ULML923Primer - DifficultSubstrates Gloss L568 ULML968

Direct Thermal Gloss L514 ULML914Matt L530 ULML930

Superior Slip / Rub/ Water Resistance

Gloss L544 ULML944Matt L587

Recommended Testing advised Not recommended

FLEXO SPECIAL COATINGS GUIDEKey Features Type Finish Code ULM CodeLow Curl. Offers minimal shrinkage resulting in low curl. Gloss L596* ULML982IML Designed for perfect IML application Gloss L576 ULML976Adhesive Deadener. Removes tack when printed onto permanentacrylic based adhesives.

Gloss L301* ULML949Blue UVA Gloss L566*

Laminating Adhesive. Bonds clear film to paper and filmic materials. Free Radical L392*L527

ULML995

Cationic L507

Cold Foil Adhesive. Bonds decorative foil to any substrate. L414* ULML904High Visco L533*

Release Coating. Wet Peel, used for coupon and reseal products.Cationic Gloss L075Cationic Matt L336

Signature Panel. Accepts ball point pen with minimal smudging. Matt L521 ULML921Holo Emboss. Bonds holo emboss effect films to paper and filmicmaterials. Gloss L600 ULML900

Soft Touch. Leaves a silky, soft touch finish. Matt L584HMRC Duty Stamps. Security coating required for UK Duty Stamps. Yellow UVA Gloss L464*

Optically Bright CoatingsUsed for trigger marking / security applications. These coatingsfluoresce under UV black light.

Yellow UVA Gloss L463*Blue UVA Gloss L405*Blue UVAO/P Gloss L541

Blue UVA Matt L606*Special Effect.These coatings provide a silver glitter or pearlescent effect.

Glitter L229 ULML929Pearl L222 ULML922

*Please note these products contain Benzophenone.

Contact Paragon for the Product Information Sheet, which contains technical informationand printing recommendations.

15

WATERBASED 4000 RANGEComplies to the EuPIA Exclusion Policy

4 Colour Process Set CodeProcess Yellow WBYF4405Process Magenta WBRF4405Process Cyan WBCF4405Process Black WBBF4407

Base Colours CodeYellow WBYF4401021 Orange WBYF4404Warm Red WBRF4402032 Red WBRF4404Rubine WBRF4401Rhodamine WBRF4403Purple WBCF4403Violet WBVF4401072 Blue WBCF4404Reflex Blue WBCF4402Process Blue WBCF4401Green WBGF4401Mixing Black WBBF4402Extender WBTF4401Hi Opacity White WBWF4404



High Slip Lacquer (Non O/P) WBC412Trans Process Extender (New) WBC408

16

WATERBASED ADDITIVES

Description Code DetailsRetarder AD2401 Additive to reduce drying times.

Add up to 5%.Fast Solvent AD2402 Additive to increase drying times.

Add up to 10%. Must be stirred in.Refresh StabilizerReducer

AD2414 Keeps inks open on long runs.

An add of 2-3% should be sufficient.Levelling Additive

AdditiveAD2415 Silicone additive, reduces pinholes, etc.

Add up to 2%. Must be stirred in.Print CleanStabiliser

AD2405 Best all round additive for pH, reduced drying and stability.

Add up to 10%.Press SideDefoamer

AD2416 Defoamer additive.

Add up to 3%

WATERBASED CLEARCOAT SELECTOR GUIDEKey Feature Finish Paper Filmic Chemi

ThermalBlocking Scuff

resistantCode

General Purpose Gloss WBC412Matt WBC416


Gloss WBC408Matt WBC419

Adhesive deadener Gloss WBC411Superior Slip / Rub/ Water Resistance Gloss WBC444


17

UVDRY LETTERPRESS RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

4 Colour Process Set CodePantone Process Yellow LMYP2003Pantone Process Magenta LMRP2005Pantone Process Cyan LMCP2005Pantone Process Black LMBP2001

Base Colours CodePantone Yellow LMYP2001Pantone 021 Orange LMYP2002Pantone Warm Red LMRP2002Pantone 032 Red LMRP2004Pantone Rubine LMRP2001Pantone Rhodamine LMRP2003Pantone Purple LMCP2003Pantone Violet LMCV2001Pantone 072 Blue LMCP2004Pantone Reflex Blue LMCP2002Pantone Process Blue LMCP2001Pantone Green LMGP2001Pantone Mixing / Untoned Black LMBP2002Tinting Medium LMV2001Opaque White LMW2001

Dense Opaque White LMW095Spot Reflex Blue (Fine text & line work) LMC3003Process / Dense Black (Fine text & line work) LMB1450




18

UVDRY LETTERPRESS SERIES 3000 RANGE (Lightfast)Complies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

4 Colour Process Set CodeProcess Yellow LMYP3003Process Magenta LMRP3005Process Cyan LMCP3005Process Black LMBP3001

Base Colours CodeYellow LMYP3001021 Orange LMYP3002Warm Red LMRP3002032 Red LMRP3004Rubine LMRP3001Rhodamine LMRP3003Purple LMCP3003Violet LMCV3001072 Blue LMCP3004Reflex Blue LMCP3002Process Blue LMCP3001Green LMGP3001Mixing / Untoned Black LMBP3002Tinting Medium LMV3001Opaque White LMW3001

Dense Opaque White LMW095

Contact Paragon for the Product Information Sheet which containstechnical information and printing recommendations.



19

UVDRY LETTERPRESS FLUORESCENT RANGEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

Fluorescent CodeFluorescent 801c Blue LMLPC801Fluorescent 802c Green LMLPG802Fluorescent 803c Yellow LMLPY803Fluorescent 804c Orange LMLPY804Fluorescent 805c Red LMLPR805Fluorescent 806c Pink LMLPR806Fluorescent 807c Purple LMLPC807Fluorescent 808c Green LMLPG808Fluorescent 809c Yellow LMLPY809Fluorescent 810c Orange LMLPY810Fluorescent 811c Orange LMLPY811Fluorescent 812c Pink LMLPR812Fluorescent 813c Pink LMLPR813Fluorescent 814c Purple LMLPC814


Printing Fluorescents

Fluorescent pigments, in general, are very weak in colourstrength compared to conventional ink systems however thisrange has been developed with increased strength to allowlower volume aniloxes to be used.

Fluorescent Lightfastness

Fluorescent colours are poor for lightfastness and areestimated at Blue wool Scale 1-2. We do not recommend thatthe printed examples of these colours be exposed to daylightconditions.

Contact Paragon for the Product Information Sheet, which contains furthertechnical information and printing recommendations

20

UVDRY LETTERPRESS 1-PACK METALLIC RANGE(Benzophenone, ITX and BDK free)

1 - Pack Metallics CodeLetterpress 1-Pack 871c Gold 1991Letterpress 1-Pack 872c Gold 1992Letterpress 1-Pack 873c Gold 1993Letterpress 1-Pack 874c Gold 1994Letterpress 1-Pack 875c Gold 1995Letterpress 1-Pack 876c Gold 1996Letterpress 1-Pack 877c Silver 1997


LETTERPRESS SCRATCH-OFF RANGE(Please note this ink range contains Benzophenone)

Letterpress Scratch-Off CodeLetterpress Scratch-Off Duct Varnish V234Letterpress Scratch-Off Metallic Varnish MV1051Letterpress Silver Paste 1964Letterpress New Scratch-Off Black B1228Flexo Scratch-Off Over Lacquer L574

Unmixed Shelf Life: 6 months. Mixed Shelf Life: maximum 12 hours

Contact Paragon for the Product Information Sheet, which contains technicalinformation and printing recommendations.

21

UVDRY LETTERPRESS ADDITIVES

Description Code DetailsLiquid Reducer AD101 Use as required to lower the viscosity and tack of

inks and varnishes.

An add of 5% should be sufficient.Cure Promoter(Colours only)

AD220 Used to improve the cure of coloured inks.

Do not use In clear coatings, whites or tints.

An add of 2-3% should be sufficient.Cure Promoter AD200 Used to improve the cure of whites, clear coatings

and tints.

An add of 2-3% should be sufficient.Slip Additive AD317 Used to improve the tape adhesion of inks or

varnishes.



Add to subsequent colours used in the process fortrapping purposes.

Gel Reducer AD103 Special reducer which will lower the tack of an inkor varnish.

Ideal for use on flat bed or semi-rotary machines.


22

LETTERPRESS SPECIAL COATINGS GUIDEComplies to the EuPIA Exclusion Policy(Benzophenone, ITX and BDK free)

Key Feature Finish Paper Filmic ChemiThermal

Blocking Scuffresistant

Code

General PurposeGloss V540Satin V573Matt V595


Gloss V510Satin V564Matt V525

Cost Effective Gloss V524Primer Gloss V521Direct Thermal Gloss V575Superior Matt Matt V536


LETTERPRESS SPECIAL COATINGS GUIDEComplies to the EuPIA Exclusion Policy

Key Features Type Finish CodeAdhesive deadener.Removes tack when printed onto permanent acrylic based adhesives. Gloss V076*

Cold Foil Adhesive. Bonds decorative foil to any substrate. V330*Release Coating. Wet peel, used for coupon and reseal products. Cationic V220Release Coating. Dry Peel, used for coupon and reseal products. V033*Signature panel. Accepts ball point pen with minimal smudging. Matt V525HMRC Duty Stamps. Security coating required for UK Duty Stamps. Yellow UVA Gloss V335*Optically Bright CoatingsUsed for trigger marking / security applications. These coatingsfluoresce under UV black light.

Yellow UVA Gloss V341Blue UVAoverprintable Gloss V043*

Special effect.These coatings provide a silver glitter or pearlescent effect.

Glitter V122Pearl V031*

*Please note these products contain Benzophenone.

Contact Paragon for the Product Information Sheet, which contains technical informationand printing recommendations.

Other Specials available on request.Glow in the dark or Thermochromics, etc.

Sweden - Head Office Marabu Scandinavia AB+46 40 672 84 [email protected]

Sweden - StockholmMarabu Scandinavia AB+46 8 448 07 [email protected]

Sweden - GothenburgMarabu Scandinavia AB+46 40 672 84 [email protected]

Denmark - Vejle Marabu Scandinavia+45 70 10 00 [email protected]

Norway - OsloMarabu Scandinavia+47 22 73 50 [email protected],www.marabu.no

Finland - VantaaMarabu Scandinavia+358 9 279 85 [email protected],www.marabu.fi

Get in touch with Marabu Scandinavia

Documents

Paragon - Marabu Scandinavia · ec Marabu Scandinavia Marabu Scandinavia is a wholly owned subsidiary of Ma-rabu GmbH & Co., ... Fluorescent 802c Green LMFLG802 Fluorescent 803c Yellow