1
DEVELOPMENTS NEW EQUIPMENT, PROCESSES, & MATERIALS Carbon Adsorption Canister cafBro/ Corp. Westport, Corm. Carbtrol Corp. announces the re- engineering of its widely used 200-lb liquid-phase activated carbon adsorp- tion canister. The Model L-l canister is used for treatment of contaminated groundwater and wastewaters. Key based primer paints. Paintstik markers are real paint in easy-to-use crayon form. They arc fast and clean to use, make durable marks on many surfaces, and prevent the use of messy liquid paint and brush. Circle 402 on reader information card Fume Scrubber Tri-Mer Corp. Owosso, Mich. Tri-Mer’s fan/separator operates at 99+% efficiency, removing high inlet loads of sulfuric acid, hydrochloric acid, hydrofluoric acid, nitric acid, design features of the new unit include low pressure drop, high contaminant adsorption capacity, no-leak and corro- sion construction, and bottom-drain capabilities. Units are supplied with a service and performance warranty. Circle 401 on reader information card Paint Marker la-ColMarkal Industries Inc. Elk Grove Village, 111 The BL-W Paintstik marker makes marks that bleed through a water-based primer coat, making the marks clearly visible. Valuable marks made on the surface of structural steel or other metal-fabrication applications are not lost when they are painted over. The marks resist fading and weathering and will not wash off. BL-W Paintstik markers join Markal’s BL Paintstik, which makes marks formulated to bleed through oil-based or solvent- 62 METAL FINISHING . MAY 1995 plating exhausts, and other corrosive fumes from metal finishing. The fan/ separator requires less than ‘/lo the water of competitive scrubbers and uses 20% less brake horsepower due to a unique design that uses the fan as a centrifuge in the scrubbing process. The mated fan impeller is engineered to operate at lower rpm, conserving utility costs, and the modular filter pack is easy to access. The fan/ separator features capacities of 50- 100,000 cfm; and materials of con- struction include polypropylene, PVC, 316 and 304 stainless steel, and mild steel. Circle 403 on reader information card Precious Metal Targets Tosoh SMD Inc. Grove Cily, Ohio Tosoh SMD introduces its high- performance line of conical and planar precious metals targets, which provide consistent, superior thin film uniform- ity. The precious metal targets utilize Tosoh SMD’s proven controlled metal- lurgy to provide target-to-target consis- tency and superior uniformity through target life. These targets are available for all leading sputtering systems. Circle 404 on reader Information card Coated-Abrasive Caps Pferd Leominster, Mass. Policaps are designed to be used with all types of small portable pneu- matic or electric power tools to handle cleaning and polishing in hard-to-reach or recessed areas. The seamless, coated-abrasive caps are fitted over a slotted, hard-rubber drum. Worn caps can be easily removed. Many different grits, sizes, and shapes are available to meet all finishing and polishing re- quirements. A 270-piece Policap kit containing a supply of the more com- monly used caps, heads, and grits is also available. Circle 405 on reader information card

Paint marker

Embed Size (px)

Citation preview

Page 1: Paint marker

DEVELOPMENTS NEW EQUIPMENT, PROCESSES, & MATERIALS

Carbon Adsorption Canister cafBro/ Corp. Westport, Corm.

Carbtrol Corp. announces the re- engineering of its widely used 200-lb liquid-phase activated carbon adsorp- tion canister. The Model L-l canister is used for treatment of contaminated groundwater and wastewaters. Key

based primer paints. Paintstik markers are real paint in easy-to-use crayon form. They arc fast and clean to use, make durable marks on many surfaces, and prevent the use of messy liquid paint and brush.

Circle 402 on reader information card

Fume Scrubber Tri-Mer Corp. Owosso, Mich.

Tri-Mer’s fan/separator operates at 99+% efficiency, removing high inlet loads of sulfuric acid, hydrochloric acid, hydrofluoric acid, nitric acid,

design features of the new unit include low pressure drop, high contaminant adsorption capacity, no-leak and corro- sion construction, and bottom-drain capabilities. Units are supplied with a service and performance warranty.

Circle 401 on reader information card

Paint Marker la-ColMarkal Industries Inc. Elk Grove Village, 111

The BL-W Paintstik marker makes marks that bleed through a water-based primer coat, making the marks clearly visible. Valuable marks made on the surface of structural steel or other metal-fabrication applications are not lost when they are painted over. The marks resist fading and weathering and will not wash off. BL-W Paintstik markers join Markal’s BL Paintstik, which makes marks formulated to bleed through oil-based or solvent-

62 METAL FINISHING . MAY 1995

plating exhausts, and other corrosive fumes from metal finishing. The fan/ separator requires less than ‘/lo the water of competitive scrubbers and uses 20% less brake horsepower due to a unique design that uses the fan as a centrifuge in the scrubbing process. The mated fan impeller is engineered to operate at lower rpm, conserving utility costs, and the modular filter pack is easy to access. The fan/ separator features capacities of 50- 100,000 cfm; and materials of con-

struction include polypropylene, PVC, 316 and 304 stainless steel, and mild steel.

Circle 403 on reader information card

Precious Metal Targets Tosoh SMD Inc. Grove Cily, Ohio

Tosoh SMD introduces its high- performance line of conical and planar precious metals targets, which provide consistent, superior thin film uniform- ity. The precious metal targets utilize Tosoh SMD’s proven controlled metal-

lurgy to provide target-to-target consis- tency and superior uniformity through target life. These targets are available for all leading sputtering systems.

Circle 404 on reader Information card

Coated-Abrasive Caps Pferd Leominster, Mass.

Policaps are designed to be used with all types of small portable pneu- matic or electric power tools to handle cleaning and polishing in hard-to-reach or recessed areas. The seamless, coated-abrasive caps are fitted over a slotted, hard-rubber drum. Worn caps can be easily removed. Many different grits, sizes, and shapes are available to meet all finishing and polishing re- quirements. A 270-piece Policap kit containing a supply of the more com- monly used caps, heads, and grits is also available.

Circle 405 on reader information card