Overview of Valve Terminal Systems€¦ · For a rapid initial selection: universal terminals and terminals for specific requirements at a glance. Universal terminals Individual valves

Overview of Valve Terminal Systems

Ventilinseluebers_en.qxp 28.07.2011 13:23 Uhr Seite 1

2

Putting you in a leading position, no matter

whether the solution you need is simple or complex

Can you imagine defending a unique position for more than 20 years? No? But this

is precisely what we have done. Ever since Festo invented the valve terminal, we

have been the leader, both in terms of the scope of our product portfolio and the

development of new and better functions. And we mean to hold on to that position

– to help you, our customers, create a lead for yourselves over your competitors.

You will find suggestions on how to do this on the following pages.

Simple and inexpensive:

5 valve terminal ranges with

bus node CTEU

Whenever you need solutions

which are simple but nonethe-

less compatible with fieldbus

systems: Festo offers 5 inexpen-

sive valve terminal ranges

equipped with a bus node CTEU.

This strikingly simple fieldbus

technology replaces existing

installations with multi-pin

connectors or individual wiring –

and doesn’t cost any etxra!

The basis for this communication

interface for all CTEU-compatible

valve terminals is the Festo

specific “I-Port” as a universal

M12 connector. This offers the

flexibility of accepting the new

fieldbus/Ethernet bus modules

type CTEU or being configured

for IO Link.


These valve terminals are cre-

ated for automation in the 21st

century and are unique in the

world thanks to function inte-

gration and a holistic approach:

In combination with CPX, these

valve terminals are able to

display their strengths to the

full as an automation platform

for electrical I/O, standard, pro-

portional and servopneumatics,

sensors and compact vision

systems and with motion

control.

Keeping complex tasks firmly

under control with valve

terminals MPA or VTSA

combined with the modular

electrical terminal CPX

With CPX and valve terminals,

it is possible for the first time

to combine functions such as:

• Front-end control

• Motion control

• Measurement and control

• Diagnostics and condition

monitoring

and implement universal

communication via a fieldbus

system and Ethernet from the

field level up to the master

control level.

What is more, CPX opens up

these valve terminals for use

with all normal fieldbus systems

and all electrical installation

standards. A complete pneu-

matic control chain can be

controlled via just one fieldbus

connection, while the integrated

motion control functions allow

electrical and servopneumatic

positioning. And the heavy-duty

front-end controllers make it

possible to carry out comprehen-

sive process optimization using

their signal pre-processing

functions.

3

A full range of integrated automation options from Festo.


For a rapid initial selection:

universal terminals and terminals for

specific requirements at a glance.

Universal terminals

Individual valves and valve terminals

in one range VTUG

Modular valve terminals

on sub-bases MPA, VTSA

Compact valve terminals CPV

Specific requirements

ISO standard

- Multi-pin/fieldbus

(sizes 02, 01, 1, 2, 3) VTSA

- Individual connections VSVA/VTIA

Weight-optimised (polymer) VTUB

Pilot valves (semicon, PA) VTOC

Easy to clean CDVI

ATEX

- Zone 2 (cat. 3) CPV, MPA,

CPX- Zone 1 (cat. 2) CPV-EXi

4

Overview: The world of Festo valve terminals

The valve terminal selection table …

… will guide you quickly to the right

solution. It shows a wealth of valve

terminal variants, together with their key

technical features and recommendations

for industry-specific requirements or

particular applications. De

cen

tra

lise

d

Flow rate (litres/min. per valve, max.)

Valve terminals

Electrical periphery

Electrical inputs(max. per valve terminal)

1100/1400

CPX terminal: multifunctional, modular, flexible periphery. Independent platform, comprehensive diagnositics and function integration.Options: remote I/O, remote control and motion control.

CPI systemdecentralised installation system. Up to 16 I/O modules and valve terminals.

3 platforms, for I/O modules, valve terminals and master modules.

400

800

1600

200

200

650

360

300

700

900

800

800

500 VB20

VB20

VB20

400 VB12

1000

500

1000

10

8 16 72 92 144 512 8 16 24

12

550/700

1800/1800

3)

VSVA/VTIA – ISO 15407-1Modular, individual connectors M8/M12,

C type

CPX/VTSA/VTSA-F – ISO 15407-2 and 5599-2Modular, high pneumatic functionality, with electrical I/O

CPX/MPA-S/MPA-F/MPA-LUniversal, modular, flexible, serial valve control, with electrical I/O

CPV Universal, compact, high performance

VTUGUniversal, compact sub-base,

high flow rate

VUVB/VTUBUniversal, highly economical

VTOCCompact, flexible 2x 3/2-waypilot valves

CDVIClean Design IP65/67

3000/3000

4500/-

CTEU/CAPC

Flexible fieldbus and installation concept for up to 2 I/O modules orvalve terminals.

For fast help with planning, why not use the valve terminal configurator in the electronic

catalogue of Festo? Available via www.festo.com, this assists you with the configuration

of almost 20 valve terminal ranges to meet your requirements.


De

cen

tra

lise

d

Pre

ssu

re s

en

sor

Pro

po

rtio

na

l pre

ssu

re r

eg

ula

tor

En

d-p

osi

tio

n c

on

tro

lle

r S

oft

Sto

p

Se

rvo

pn

eu

ma

tic

po

siti

on

ing

sys

tem

Mu

lti-

axi

s in

terf

ace

fo

r e

lect

ric

axe

s

Sa

fety

te

chn

olo

gy

valv

es

So

ft s

tart

/exh

au

st v

alv

es

Ele

ctri

cal v

olt

ag

e z

on

es

Ve

rtic

al s

tack

ing

Mu

lti-

pin

IO L

ink

, I-

Po

rt

AS

Inte

rfa

ce

De

vice

Ne

t

Pro

fib

us

Inte

rbu

s

CA

No

pe

n

CC

Lin

k

Eth

erC

at

Eth

ern

et/

IP

Mo

db

us/

TCP

Pro

fin

et/

IO R

T

Inte

gra

ted

co

ntr

oll

er

Dir

ect

ly a

ctu

ate

d

Pil

ote

d

Va

cuu

m

Se

vera

l pre

ssu

re z

on

es

IP4

0

IP6

5

IP6

7

Exp

losi

on

-pro

of

Sta

tus

bit

Mo

du

le/c

ha

nn

el-

ori

en

ted

Pre

ven

tve

ma

inte

na

nce

/CM

S

We

b-b

ase

d,

we

b m

on

ito

r

No. of valve coils (max. per valve terminal)

16 24

12

5

DiagnosticsProtectionclass

Valve

properties

Electrical connectionFunction integration

Communication protocol

1) Via CPI system 2) For example: manual pressure regulators, pressure gauges, flow control plates, flow control/shut-off plates (hot-swap), pressure supply, integrated non-return functions/back-pressure valves 3) Via CTEU/CAPC system, up to 32 inputs or 96 valves 4) MPA-L only

32 40 48 56 64 128 512

1) 1)

2)

2) 4)

2)

3)

1) 1) 1)


Valve terminal VTUG/

individual valves VUVG

The universal valve terminal at

an attractive price. Small, with

high flow rates and all major

functions.

Valve terminal VTUB

Flexible and simple, with an

excellent price/performance

ratio. Sizes VB12 or VB20.

Valve terminal CPV

Maximum performance density

in a minimum of space. Direct

integration of all common bus

interfaces. Compact, with a

fixed grid dimension.

Valve terminal CDVI

Clean and modular, in

IP65/IP67. Easy to clean and

corrosion-resistant, suitable for

all zones up to the splash zone.

Pilot valve terminal VTOC

Compact and flexible, ideal for

piloting process valves in the

semicon, photovoltaics and

process industries.

Valve terminal VSVA

(ISO 15407-1, 5599-1,

individual connections)

Pre-assembled, for medium to

high flow rates. 4 valve sizes

can be combined without the

need for adapters. Integrated

safety functions possible.

Valve terminals VTSA/VTSA-F

(ISO 15407-2, 5599-2, plug-in)

Modular, convertible and

expandable sub-base concept,

based on ISO standard, for

everything up to complete

installation solutions. Offers

maximum pneumatic function

integration and many safety

functions.

Modular valve terminals

MPA1/MPA2/MPA-F

Fieldbus or multi-pin terminals

or individual valves with IP65

metal valve bodies and

subbases. Serial stacking for

fulldiagnostic and condition

monitoring functionality and

integrated proportional

pneumatics. MPA-F: 30% higher

flow rate than MPA 1/2.

Highly modular valve terminal

MPA-L

Plastic sub-bases. Up to 32

valve positions/coils, expand-

able in small increments.

6

Festo’s world of valve terminals in detail

A brief overview of selected valve terminals and peripheral

products, together with services and support facilities.

More information can be found on our Internet Support

Portal: www.festo.com

Here you will find detailed descriptions of almost 20 valve

terminal ranges – just enter the type (e.g. VTSA).


7

Modular electrical terminal CPX

A world-wide unique platform for

function integration, including

electrical I/O, standard, pro por-

tional and servopneumatics,

sensors and compact vision

systems and motion control.

Decentralised installation

system CPI

Highly modular control and

energy supply concept with a

single transition point for all

common fieldbuses and Ethernet

protocols.

Bus node CTEU

Impressively simple fieldbus

technology: For fieldbus-capable

valve terminals for the price of a

multi-pin solution. Optional

adapter CAPC as a small installa-

tion system.

AS-interface components

Extremely simple, economical and

flexible installation and control of

distributed individual valves, sen-

sors and safety technology. A sin-

gle source for pneumatic as well

as electrical components.

IO Link/I-Port

Standardised point-to-point com-

munication link for diagnostics

and parameterization of sensors,

actuators, valves and valve termi-

nals. The I-Port is a Festo-specific

communic a tion link with inte-

grated Festo Plug and Work®-con-

cept. For ultra-simple system

assembly and commissioning.

Fieldbus direct connection

Space-optimised connection of

valve terminals using directly

integrated fieldbus node.

Advantage: Everything from a

single source – and optimised

pneumatic diagnostics.

Fieldbus/Ethernet

Designed to be more

communicative! Festo supports all

established fieldbus systems. For

a high degree of integration of

electric, pneumatic and motion

control functions on a single

platform and from a single source.

Allows comprehensive diagnos-

tics and condition monitoring,

pre-processing and seamless

integration into your control

system .

Electrical connection technology

Perfectly matched: The modular

system NEBU for connecting ca-

bles.

After-Sales Service

Hot line, spare parts service,

repair service, emergency service

or on-site technical customer

service – as a single service or

as a modular service package.

Energy Saving Services

Achieve energy and other cost

savings of up to 60% together

with increased productivity – an

investment that will generally pay

for itself within a short time.


Advanced function integration

Beck Automation AG,

Oberengstringen, Switzerland

If a company wishes to develop

stylish solutions, it needs

inventive but also reliable

partners. “Festo is just such a

partner,” explains Christian

Beck, one of the managing

partners of the Swiss company

Beck Automation AG. This

company supplies hand ling

robots for the in-mould labeling

process. For Beck, international

service is just as important as

excellence in technology.

Decentralization as a magic

formula

KUKA Systems GmbH,

Augsburg, Germany

Solar modules on a 10-second

high-speed tuning cycle to

produce crystalline photovoltaic

modules. Trimming, taping on

the fly and framing are under-

taken by fully-automatic robotic

systems. Festo pneuma tic

proportional technology ensures

that the contact pressure of the

tape roller is correct. The

decentralised electro - pneumatic

control chain with CPX/MPA

directly on the robot tool makes

the process faster and more

reliable and saves energy.

Individual control

elumatec GmbH,

Mühlacker, Germany

A good appearance is important

for successful sales! This also

applies to aluminium and plastic

profiles, as the manu facturer

elumatec knows: “Our machines

need to be fast and precise and

also sensitive.” This is why

elumatec chooses Festo valve

terminal technology. “In order to

be able to actuate cylinders with

different pressures, we use the

functionality of Festo products

for creating of pressure zones

and for the vertical stacking of

modules.”

8

Attractive solutions – from every point of view

The whole is greater than the sum of its parts. Whoever takes this rule to heart becomes

stronger. Just like us at Festo. We always aim to use our individual strengths to create a

holistic solution. Our customers greatly appreciate this. Here are just a few examples:


Commissioning and mainte-

nance: As easy as child’s play

CeraCon GmbH,

Weikersheim, Germany

People seldom give a thought to

foam seals, but these provide re-

liable protection from air, dust

and humidity. CeraCon’s new

one-component system and

proportional technology from

Festo is generating innovation

in the seal industry. During the

preparation and dosing of the

materials, a valve terminal

CPX/MPA with diagnostic

functionality forms a bridgehead

to the master machine control

system. Standardised network-

ing and a neat installation

structure, easy implementation

and high function density

provide benefits for CeraCon as

commissioning and maintenance

become as easy as child’s play.

Seminar on higher plant

efficiency

Karlsberg Brauerei GmbH,

Homburg, Germany

One important concept for

increasing machine availability

and reducing downtime is Total

Productive Maintenance, or TPM.

This is used by, for example, the

brewery Karlsberg Brauerei GmbH

in Homburg to achieve a

continuous increase in plant

efficiency. The Festo Didactic

seminar “Fundamentals of Total

Productive Maintenance (TPM)”

provided the company with an

introduction to this concept.

Reducing costs with ready-to-

install control cabinets

Ziemann Group,

Ludwigsburg, Germany

The Ziemann Group in Ludwigs-

burg develops and builds

brewery installations for clients

worldwide. The extremely

economical operation of these

installations allow breweries to

run production operations with

extremely low life-cycle costs.

In designing these installations,

Ziemann concentrates totally on

its own core competences.

Control cabinets for the produc-

tion systems in the brewing

rooms and refrigerated areas

are supplied by Festo as ready-

to-install units. These control

the pneuma tic process valves

and provide individual diagnos-

tics for each valve. A pressure

measurement module on each

valve manifold checks the

supply pressure.

9

Our range of products and services provide

everything you need:

• Complete portfolio for every requirement

• Clear installation concepts, also for

combined installations

• Comprehensive ncentrated services covering

everything from engineering to after sales

• Support tools for all phases from engineering

to operation, e.g. for correct dimensioning

• Attractive electrical and pneumatic concepts

• Maximum function integration

• Diagnostic and condition monitoring packages


3. Concepts with a protected

installation area: lower

protection class possible,

fewer connections

• IP20 connection system

CageClamp for control

cabinets. Flexible, reliable, fast

• Multi-pin connectors in control

cabinets save hardware costs

• CageClamp IP20 on machines

and in safety covers AK-8KL for

CPX gives IP65/67

• Pneumatic multi-pin connector

for CPV or VTUG saves a vast

amount of installation work

• Protective cover CAFR – for

electric shock protection

without a control cabinet

1. Concentration of a number of

valves and I/O on one point with

central installation

Example of CPX/VTSA with

Profibus:

• Price per channel for 4

5/2-way valves 100%


5/2-way valves 40% less



Example of CPX/MPA with

Profibus:


3/2-way valves 100%





2. More performance – greatly

reduced price per channel on

high-capacity I/O modules

• 8 digital inputs instead of 4:

price per channel 40% less

• 16 digital inputs instead of 8:

25% less

• 8 digital outputs instead of 4:

15% less

• 4 analogue inputs instead of

2: 20% less

More channels per modules

means, for example, overhead

costs with decentralised valve

terminals which are up to 34%

lower!

4. Benefit from higher

productivity

A decentralised machine concept

requires greater investment. But

it can speed up cycle times by

10%, thus making the investment

pay for itself within just a few

weeks. Diagnostic functions are

also well worthwhile and improve

the total cost of ownership (TCO)

of your end customers (see

point 5, page 12). With remote

maintenance, for example, you

can offer completely new types of

service concepts or maintenance

contracts and new forms of

guarantees.

10

Reducing the cost of electrical and motion control solutions

Within the overall costs of an installation, the costs of the components themselves are

often the smallest item. You can therefore reduce overall costs by planning ahead. Below

you will find some hints and tips that will help you to get more out of your budget.

Technological optimization for more economic production

Deal with one component

instead of over 200. In factory

and process automation, it is

possible to optimize overall

costs and increase reliability.

For example, with well-thought-

out control cabinet concepts,

even for high-volume

production.


11

Electrical criteria and motion control

Electrical criteria

No. of valvesNo. of digital I/O

• Analogue I/O• Temperature measurement • Pressure measurement• Displacement measurement

I/O parameterizable

Motion control for electric drives• Asynchronous• Synchronous• 2.5 D

Motion cont. servopneumatic drives• Soft-Stop end-position cushioning• Positioning system

• IO Link/I-Port• Fieldbus• Ethernet• Fieldbus and Ethernet

in combination• Pre-processing

(front-end control)- CEC-C1 diagnostics- CEC-M1 motion- PC Worx

Diagnostic functions• LEDs• Hand-held control unit • Module-oriented• Channel-oriented• CMS• Limit values • SMS/e-mail alarm• CPX web monitor• CPX-FMT maintenance tool

Centralised

8 ... 128

Preferred tubing

length < 3 m

Yes

Yes

Yes

Yes

Yes

Up to 31

Up to 8

Up to 8

Up to 8

Up to 8

–

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Decentralised

32 ... 128

Distance between

modules up to 8 - 10 m

–

–

–

–

–

–

–

–

–

–

–

Yes

Yes

Yes, with CPX

Yes

Yes

Yes

Yes

Yes

Yes

–

–

–

Yes

Yes

Yes

Hybrid

… 512

Yes

Yes

Yes

Yes

Yes (local I/O)

Up to 31

Up to 8

Up to 8

Up to 8

Up to 8

–

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes (local I/O)

Yes

Yes (local I/O)

Yes

Yes

Yes

On-site (Fieldbus Direct)

2 … 32 (48)

–

–

–

–

–

–

–

–

–

–

Yes

Yes

–

–

–

–

–

Yes

–

Yes

–

Yes

–

–

–

–

Fieldbus I/O

Bandwidth

Typical

16 32 64 128 5128

Fieldbus I/O

Bandwidth

Typical

16 32 64 128 5128

Fieldbus I/O

Bandwidth

Typical

16 32 64 128 5128

Fieldbus I/O

Bandwidth

Typical

16 32 64 128 5128

ASi I/Os

Bandwidth

Typical

4 82


A further benefit: our

Condition Monitoring

Service. This continuously

monitors critical processes

and avoids unplanned

downtime. This service can

be matched exactly to your

requirements and we can

also provide support during

implementation. Ask our

specialists!

3a. Optimizing installation

space by up to 70%

The closer valves and I/O

modules are to the application,

the less installation space is

required. What is more, a multi-

pin connector can be up to 40%

smaller than a fieldbus

connector.

3b. Optimizing installation

space by up to 50%

Halve the installation width by

installing higher-capacity I/O

modules (see point 2, page 10).

3c. Optimizing installation

space: Decentral I/O modules

for three platforms

• Compact – minimal installation

space

• Robust – aluminium housings

with metal threads

• Economical – high channel

density

12

Reducing the cost of pneumatic components and safety technology

Do you know our integrated

technology? It offers system so-

lutions that deliver maximum

performance with minimal di-

mensions. These are ideal wher-

ever a compact neat design or

fast installation and mainte-

nance is important.

1. Saving flow rate by up to 50%

The principle is to be as close as

possible to the application; e.g.

by mounting on handling units or

robots.

2. Optimizing cycle times

by up to 30%

Will fast valves or a higher flow

rate boost performance? A

precise answer is provided by a

simulation which also takes into

account tubing cross-section and

length.

4. Function integration

for demonstrable efficiency

gains of up to 60%

Modules for temperatur e

measurement, manual pressure

regulators, pressure sensors

or proportional valves can now

be ordered fully integrated,

pre- assembled and tested on

CPX/MPA. This saves space

and simplifies installation,

commissioning and

programming.

5. Optimised machine

utilization through diagnostics

There is a wide choice of

diagnostic functions and

diagnostic depth, with

optimization of the strategic

diagnostic approach. Herer

are a few examples:

Technology that delivers greater economy

• Reducing downtime by a

factor of 8 with channel-

oriented diagnostics. Allows

immediate detection of the

type of fault and its location.

• The valve terminal MPA is

more reliable, safer and more

economical thanks to serial

linking, special Festo valve

ASICs and pressure sensors.

• CPX Web Monitor – optional

for all valve terminals

connected to CPX via

Ethernet. Comprehensive

diagnostics without program-

ming costs using standard

browsers.

• Condition Monitoring

Systems for preventive

maintenance to avoid

breakdowns. Only from

Festo: specially for valves!


13

Pneumatic Centralised Decentralised On-site* Hybridcriteria MPA VTSA MPA CPV MPA VTSA CPV

No. of valves 1 … 128 1 … 32 2 … 32 4/6/8 8 ... 48* 1 … 512 1 … 32 + 4 … 512

decentral

MPA/CPV

up to 480

Flow rate 360 700 360 200** – 360 700 200**

700 1400 700 400 – 700 1400 400

900 1800 800 – 900 1800 800

3000 1600 10 ... 1600* 3000 1600

4500 4500

Vertical stacking• Manual regulator Yes Yes Yes – Yes* Yes Yes –

• Flow control plate – Yes Yes Yes Yes* – Yes Yes

• Pressure shut-off plate Yes Yes Yes – Yes* Yes Yes –

• Air supply plate – Yes – – – – Yes –

Valve size mix• 2 sizes Yes Yes Yes – – Yes Yes –

• 3 sizes – Yes – – – – Yes –

• 4 sizes – Yes – – – – Yes –

• 5 sizes – Yes – – – – Yes –

Function integration• Pressure sensor Yes – – – – Yes – –

• Proportional pressure regulator Yes – – – – Yes – –

• Single-channel valve diagnostics Yes Yes – – – Yes Yes –

• CMS valves Yes – – – Yes* Yes – –

• Voltage zones, electrically isolated Yes Yes – – – Yes Yes –

Safety technology• Interlock function – – – – Yes* – – –

• Valves for press control, – Yes – – – – Yes –

with two-channel interlinking• Valves for manual clamps – Yes – – – – Yes –

• Valves for lifting/turning cylinders – Yes – – – – Yes –

• Valves with piston rod sensing – Yes – – – – Yes –

• Soft start and exhaust valve – Yes – – – – Yes –

• Switch-off concepts – Yes – – – – Yes –

up to performance level d (cat. 3)• Profisafe switch-off module up to

performance level e (cat. 3) and SIL 3 Yes Yes – – – Yes Yes –

* Depending on the valve terminal range CPV, MPA-L, VTUB, VTUG, VTOC ** CPV-SC, IP40

Pneumatic criteria and safety technology


Award-winning!

In recognition of its capacity for

innovation, Festo was accorded

the German Future Award 2010

from the Federal German

President.

We feel that there is a part of

this award in each of our new

products, thus reflecting Festo’s

intention that each product

represents the optimum in terms

of functionality and future-

oriented technology. Our great

inspiration is bionics –

unravelling nature’s original

archetype to discover the

fundamental technical principle

and creating a bionic adaptation

fit for an industrial application.

The latest electronics

from Festo.

Several hundred people work at

Festo in its electronics develop-

ment department, in specialised

laboratories, in research and in

Festo’s own electronics

production operations. We

produce well over one million

printed circuit boards each year

and test these to the strictest

standards. This ensures that our

valve terminals can be integrated

perfectly into industrial

communication systems – and

that you can rely on us to supply

start-of-the-art technology.

Virtual reality –

for faster design work …

… and dependable production.

Our research and development

department uses this

technology to simulate and

optimize fluidic processes. This

reduces time to market – and

enables complex connections

to be precsiely calculated in

advance.

The quality of Festo’s product

portfolio and production

operations …

… ensures we can deliver

maximum process reliability

and performance in pneumatics,

electrical engineering and

networking.

14

We enjoy a challenge!

Our in-house research and development department is fully equipped with state-of-the-art

the devices it needs to create objective-oriented innovations in all our major competence

areas – electronics, pneumatics, motion control and industrial networking.

Future-oriented tech-

nology.

This means many

innovative catalogue

products, tested

under real-life conditi-

ons, for your benefit.

www.festo.de

Gewinner 2010


3. Acoustics, analysis

• Sound measurement

Whisper-quiet pneumatic

products in accordance with

Festo’s own standard and

DIN 45635-1 or ISO 3745

is created in our sound

measurement toom, which

is a certified and authorized

test facility.

• Microscopes and X-rays

Analysis of material samples

and identification of

consequential faults using a

scanning electron microscope,

a laser scanning microscope

and X-ray examination.

• Spectral analysis

Detects the smallest particles

and invisible elements such

as contamination in oils.

4. Climatic tests

Continuous hot/cold cycle

In accordance with Festo stan-

dards: how long will mechanical

and electronic components last

at ambient temperatures of

between -40 and +150 °C?

5. Fire and water

Water jet tests to verify

protection class IP65/67 in

accordance with Festo’s own

standard, DIN EN 60529 and

NEMA 250 to ensure that these

components will survive a harsh

industrial environment.

6. Clean room classes

Festo products are tested in

our own Competence Center to

ensure they comply with VDI

guideline 2083 or Federal

Standard 209 F Airborne. The

result: Many inexpensive Festo

products can also be used in

clean rooms.

7. Endurance tests

In accordance with various Festo

standards. In order to ensure

maximum process reliability,

valves, valve terminals, electrical

I/O and fieldbus interfaces,

together with plugs, cables and

tubing/fitting combinations, are

exhaustively tested by bending,

stretching and connecting/

disconnecting.

8. Explosion protection

Festo carries out testing and

certification of pneumatic and

electrical explosion-proof

products, for example in

accordance with the directive

94/9/EC or EN 60079. For the

latest information, declarations

of conformity and other

documentation, see

www.festo.com/en/ex

Systematic innovation

15

A brief tour of our facilities

1. Mechanical engineering

• Tensile/compression tests …

… in accordance with

DIN EN 10002 to ensure

that the materials meet our

demanding requirements even

at extreme temperatures.

• Corrosion resistance …

… in accordance with

DIN EN 50018, DIN EN 50021

and an internal Festo standard

to ensure hard-wearing

finishes for metallic surfaces

and selected plastics.

• Vibration/shock tests

In accordance with

FN942017-5 and DIN/IEC 68.

2. Electrical engineering

Certified EMC laboratory

Conformity testing of everything

up to and including fully

assembled valve terminals in

accordance with the EMC

directives 89/336 EEC and

2004/ 108EC. Festo’s in-house

EMC laboratory also acts as an

accredited test facility!


13

52

37

en

20

11

/07

Festo worldwide

ArgentinaFesto S.A.Edison 2392(1640) MartínezProv. Buenos AiresTel. +54 (011) 4717 82 00,Fax +54 (011) 47 17 82 82E-mail: [email protected]

AustraliaFesto Pty. Ltd.Head Office (Melbourne)179-187 Browns RoadP.O. Box 261Noble Park Vic. 3174Call Toll Free 1300 88 96 96Fax Toll Free 1300 88 95 95Tel. +61(0)3 97 95 95 55,Fax +61(0)3 97 95 97 87E-mail: [email protected]

AustriaFesto Gesellschaft m.b.H.Linzer Straße 2271140 WienTel. +43 (0)1 910 75-0, Fax +43 (0)1 910 75-250E-mail: [email protected]

BelarusIP FestoMasherov avenue, 78220035 MinskTel. +375 (0)17 204 85 58,Fax +375 (0)17 204 85 59E-mail: [email protected]

BelgiumFesto Belgium saRue Colonel Bourg 1011030 BruxellesTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]

BelgiumFesto Belgium nvKolonel Bourgstraat 1011030 BrusselTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]

BrazilFesto Brasil LtdaRua Guiseppe Crespi, 76KM 12,5 - Via Anchieta04183-080 São Paulo SP-BrazílTel. +55 (0)11 50 13 16 00,Fax +55 (0)11 50 13 18 68E-mail: [email protected]

BulgariaFesto EOOD1592 SofiaBul. Christophor Kolumb 9Tel. +359 (0)2 960 07 12,Fax +359 (0)2 960 07 13E-mail: [email protected]

CanadaFesto Inc.5300 Explorer DriveMississauga, Ontario L4W 5G4Tel. +1 (0)905 624 90 00,Fax +1 (0)905 624 90 01E-mail: [email protected]

ChileFesto S.A.Avenida Américo Vespucio, 760PudahuelSantiagoTel. +56 2 690 28 00, Fax +56 2 690 28 60E-mail: [email protected]

ChinaFesto (China) Ltd.1156 Yunqiao Road,Jinqiao Export Processing Zone,Pudong,201206 ShanghaiTel. +86 21 60 81 51 00, Fax +86 21 58 54 03 00E-mail: [email protected]

ColombiaFesto Ltda.Autopista Bogotá - Medellín Km 6 (costado sur)Tenjo, CundinamarcaTel. +57 (1) 865 77 88,Fax +57 (1) 865 77 88 Ext.287E-mail: [email protected]

CroatiaFesto d.o.o.Nova Cesta 18110000 ZagrebTel. +385 (0)1 619 19 69,Fax +385 (0)1 619 18 18E-mail: [email protected]

Czech RepublicFesto, s.r.o.Modřanská 543/76147 00 Praha 4Tel. +420 261 09 96 11, Fax +420 241 77 33 84E-mail: [email protected]

DenmarkFesto A/SIslevdalvej 1802610 RødovreTel. +45 70 21 10 90, Fax +45 44 88 81 10E-mail: [email protected]

EstoniaFesto OY AB Eesti FiliaalLaki 11B12915 TallinnTel. +372 666 15 60, Fax +372 666 15 61E-mail: [email protected]

FinlandFesto OYMäkituvantie 9P.O. Box 8601511 VantaaTel. +358 (09) 87 06 51,Fax +358 (09) 87 06 52 00E-mail: [email protected]

FranceFesto EurlZA des Maisons Rouges8 rue du clos sainte Catherine94360 Bry-sur-MarneTel. +33 (0) 820 20 46 40 (numéro indigo),Fax +33 (0) 820 20 46 41E-mail: [email protected]

GermanyFesto AG & Co. KGPostfach73726 EsslingenRuiter Straße 8273734 EsslingenTel. +49 (0)711 347 0, Fax +49 (0)711 347 26 28E-mail: [email protected]

GreeceFesto Ltd.40 Hamosternas Ave.P.C. 11853 AthensTel. +30 210 341 29 00, Fax +30 210 341 29 05E-mail: [email protected]

Hong KongFesto Ltd.6/F New Timely Factory Building,497 Castle Peak Road,Kowloon, Hong KongTel. + 852 27 43 83 79, Fax + 852 27 86 21 73E-mail: [email protected]

HungaryFesto Kft.Csillaghegyi út 32-34.1037 BudapestHotline +36 1 436 51 00Tel. +36 1 436 51 11, Fax +36 1 436 51 01E-mail: [email protected]

IndiaFesto Controls Private Ltd.237B,Bommasandra Industrial Area,Bangalore Hosur Highway,Bangalore 560 099Tel. +91 (0)80 22 89 41 00,Fax +91 (0)80 27 83 20 58 / 27 83 33 62E-mail: [email protected]

IndonesiaPT. FestoJL. Sultan Iskandar Muda No. 68Arteri Pondok IndahJakarta 12240Tel. +62 (0)21 27 50 79 00,Fax +62 (0)21 27 50 79 98E-mail: [email protected]

IranFesto Pneumatic S.K.# 2, 6th street, 16th avenue,Km 8, Special Karaj RoadP.O.Box 15815-1485Teheran 1389793761Tel. +98 (0)21 44 52 24 09,Fax +98 (0)21 44 52 24 08E-mail: [email protected]

IrelandFesto LimitedUnit 5 Sandyford ParkSandyford Industrial EstateDublin 18Tel. +353 (0)1 295 49 55,Fax +353 (0)1 295 56 80E-mail: [email protected]

IsraelFesto Pneumatic Israel Ltd.P.O. Box 1076Ha'atzma'ut Road 48Yehud 56100Tel. +972 (0)3 632 22 66,Fax +972 (0)3 632 22 77E-mail: [email protected]

ItalyFesto SpAVia Enrico Fermi 36/3820090 Assago (MI)Tel. +39 02 45 78 81, Fax +39 02 488 06 20E-mail: [email protected]

JapanFesto K.K.1-26-10 HayabuchiTsuzuki-kuYokohama 224-0025Tel. +81 (0)45 593 56 10 / -5611,Fax +81 (0)45 593 56 78E-mail: [email protected]

Korea SouthFesto Korea Co., Ltd.470-1 Gasan-dongGeumcheon-guSeoul #153-803Tel. +82 (0)2 850 71 14, Fax +82 (0)2 864 70 40E-mail: [email protected]

LatviaFesto SIAA. Deglava iela 601035 RigaTel. +371 67 57 78 64, Fax +371 67 57 79 46E-mail: [email protected]

LithuaniaFesto, UABPartizanų 63M50306 KaunasLietuvaTel. +370 (8)7 32 13 14, Fax +370 (8)7 32 13 15E-mail: [email protected]

MalaysiaFesto Sdn. Berhad10 Persiaran IndustriBandar Sri DamansaraWilayah Persekutuan52200 Kuala LumpurTel. +60 (0)3 62 86 80 00,Fax +60 (0)3 62 75 64 11E-mail: [email protected]

MexicoFesto Pneumatic, S.A.Av. Ceylán 3,Col. Tequesquináhuac54020 TlalnepantlaEstado de MéxicoTel. +52 (01)55 53 21 66 00,Fax +52 (01)55 53 21 66 55E-mail: [email protected]

NetherlandsFesto B.V.Schieweg 622627 AN DelftTel. +31 (0)15 251 88 99,Fax +31 (0)15 251 88 67E-mail: [email protected]

New ZealandFesto Ltd.20 Fisher CrescentMount WellingtonAucklandTel. +64 (0)9 574 10 94, Fax +64 (0)9 574 10 99E-mail: [email protected]

NigeriaFesto Automation Ltd.Motorways Centre, First Floor, Block CAlausa, Ikeja,LagosTel. +234 (0)1 794 78 20,Fax +234 (0)1 555 78 94E-mail: [email protected]

NorwayFesto ASOle Deviks vei 20666 OsloTel. +47 22 72 89 50, Fax +47 22 72 89 51E-mail: [email protected]

PeruFesto S.R.L.Amador Merino Reyna 480San IsidroLimaTel. +51 (1) 219 69 60, Fax +51 (1) 219 69 71E-mail: [email protected]

PhilippinesFesto Inc.Festo BuildingKM 18, West Service RoadSouth Superhighway1700 Paranaque CityMetro ManilaTel. +63 (0)2 776 68 88, Fax +63 (0)2 823 42 19E-mail: [email protected]

PolandFesto Sp. z o.o.Janki k/Warszawyul. Mszczonowska 705090 RaszynTel. +48 (0)22 711 41 00,Fax +48 (0)22 711 41 02E-mail: [email protected]

PortugalFesto – Automação, Unipessoal, Lda.Rua Manuel Pinto De Azevedo, 567Apartado 80134109-016 PortoContact Center: 707 20 20 43Tel. +351 22 615 61 50, Fax +351 22 615 61 89E-mail: [email protected]

RomaniaFesto S.R.L.St. Constantin 17010217 BucurestiTel. +40 (0)21 310 31 90,Fax +40 (0)21 310 24 09E-mail: [email protected]

RussiaOOO Festo-RFMichurinskiy prosp., 49119607 MoscowTel. +7 495 737 34 00, Fax +7 495 737 34 01E-mail: [email protected]

SingaporeFesto Pte. Ltd.6 Kian Teck WaySingapore 628754Tel. +65 62 64 01 52, Fax +65 62 61 10 26E-mail: [email protected]

SlovakiaFesto spol. s r.o.Gavlovicová ul. 183103 Bratislava 3Tel. +421 (0)2 49 10 49 10,Fax +421 (0)2 49 10 49 11E-mail: [email protected]

SloveniaFesto d.o.o. LjubljanaIC Trzin, Blatnica 81236 TrzinTel. +386 (0)1 530 21 00,Fax +386 (0)1 530 21 25E-mail: [email protected]

South AfricaFesto (Pty) Ltd.22-26 Electron AvenueP.O. Box 255Isando 1600Tel. +27 (0)11 971 55 00,Fax +27 (0)11 974 21 57E-mail: [email protected]

SpainFesto Pneumatic, S.A.U.Avenida Granvia, 159Distrito Económico Granvia L'H08908 Hospitalet de LlobregatBarcelonaTel.: 901243660, Fax: 902243660Tel. +34 93 261 64 00, Fax +34 93 261 64 20E-mail: [email protected]

SwedenFesto ABStillmansgatan 1Box 21038200 21 MalmöTel. +46 (0)20 38 38 40, Fax +46 (0)40 38 38 10E-mail: [email protected]

SwitzerlandFesto AGMoosmattstrasse 248953 Dietikon ZHTel. +41 (0)44 744 55 44,Fax +41 (0)44 744 55 00E-mail: [email protected]

TaiwanFesto Co., Ltd.Head Office244509, Kung 8th RoadLinkou 2nd Industrial ZoneLinkou Dist., New Taipei CityTaiwan, R.O.C.Tel. +886 (0)2 26 01-92 81,Fax +886 (0)2 26 01 92 86-7E-mail: [email protected]

ThailandFesto Ltd.67/1 Phaholyothin Rd.,T. Klong 1, A. KlongluangPathumthani 12120Tel. +66 29 01 88 00, Fax +66 29 01 88 30E-mail: [email protected]

TurkeyFesto San. ve Tic. A.S.Tuzla Mermerciler OrganizeSanayi Bölgesi 6/1834956 Tuzla - Istanbul/TRTel. +90 (0)216 585 00 85,Fax +90 (0)216 585 00 50E-mail: [email protected]

UkraineFesto UkrainaDP Festovul. Borisoglebskaya,1104070, KievTel. +380 (0)44 239 24 30,Fax +380 (0)44 463 70 96E-mail: [email protected]

United KingdomFesto LimitedApplied Automation CentreCaswell RoadBrackmills Trading EstateNorthampton NN4 7PYTel. ++44 (0)1604 / 66 70 00,Fax ++44 (0)1604 / 66 70 01E-mail: [email protected]

United StatesFesto Corporation (New York)395 Moreland RoadP.O. Box 18023Hauppauge, NY 11788Call Toll-free 800/993 3786Fax Toll-free 800/963 3786Tel. +1(631) 435 08 00, Fax +1(631) 435 80 26E-mail: [email protected]

VenezuelaFesto C.A.Av. 23 esquina con calle 71N° 22-62, Edif. Festo.Sector ParaísoMaracaibo - VenezuelaTel. +58 (261) 759 11 20/759 41 20/759 44 38,Fax +58 (261) 759 04 55E-mail: [email protected]

VietnamFesto Co., Ltd (Cong Ty Tnhh Festo)No. 206 Tran Nao StreetWard Binh AnDistrict 2Ho Chi Minh CityTel. +84 (0)8 740 69 09, Fax +84 (0)8 740 69 10E-mail: [email protected]


Documents

Overview of Valve Terminal Systems€¦ · For a rapid initial selection: universal terminals and terminals for specific requirements at a glance. Universal terminals Individual valves