of 1 /1
ure. Additional features include splash lubrication to ensure low wear and quiet gear operation. The spring/cam gear improves re- liablity with its proven, vigorous performance. Standard model stroke length adjustment can be changed to electric stroke length adjustment with or without inte- grated controller. Circle 407 on the reader service card OVEN nMPIRATURI PROFlUR BYK-Gardner USA, Columbia, Md. BYK-Gardner's temp-gard system measures object and air tempera- ture during the curing process. The data are stored on a PCMCIA memory card, which can be taken out and the temperature profiles can be downloaded to a PC. While downloading, a different card can be used with the temp-gard to record the next baking process. Also included with the temp-gard system is temp-cart, data analysis and documentation software, which can transfer the measured temperature profiles to the BYK- Gardner gradient-oven to simulate the baking process in the labora- tory. Two different temperature profiles can be baked simulta- neously on a single test panel. Circle 408 on the reader service card CLEANIR/DIGRIASIR CRC Industries Inc., Warminster, Pa. CRC Super Degreaser, a nonchlo- rinated, nonconductive, noncorro- sive, nonstaining cleaner/de- greaser, dissolves grease, oil, corrosion, and sludge. It evapo- rates quickly and leaves no resi- due. It offers fast, effective clean- ing and degreasing for electrical components, air tools, mechanical brakes, clutches, chains, bear- ings, generators, and compres- Electroplating of Zinc Diecastings by S.K. Jalota 225 pages $90.00 This hook provides a tluite exhaustive coverage of plating on zinc die castings starting with design and production with emphasis on its relation to plating. Subsequent chap- ters tfeat polishing, bufting and mass finishing, cleaning and pretreatment, and the elluipment for plating. The balance of the book runs the gamut of the various metals rhar can be deposited. Each chapter devotes a portion to troubleshooting, causes of defects, and remedies. Concluding chapters concern coloring, lacquering, stripping of deposits, and analysis and testing. Send Orders to: METAL FINISHING 660 White Plains Rd. Tarrytown, NY 10591-5153 For faster service, call (914) 333-2578 or FAX your order to (914) 333-2570 .\111" ,ok oldlT' lilli" J". plq',lId. I'k,,,,' lIlellll!<- 'ilipping and handling for dtlinry of each hook via liPS in the U.S" SlIl.llll for each book shipped l·'pn· ... ' In f .1I1.1t1.I, .Illd S211.110 fU1" l',Kh hook :-;hlppnll'xllfl':--S to all lJlhc..·r countries. 58 Metal Finishing

Oven temperature profiler

Embed Size (px)

Citation preview

Page 1: Oven temperature profiler

ure. Additional features includesplash lubrication to ensure lowwear and quiet gear operation.The spring/cam gear improves re­liablity with its proven, vigorousperformance. Standard modelstroke length adjustment can bechanged to electric stroke lengthadjustment with or without inte­grated controller.Circle 407 on the reader service card

OVEN nMPIRATURI PROFlURBYK-Gardner USA, Columbia, Md.

BYK-Gardner's temp-gard systemmeasures object and air tempera­ture during the curing process.The data are stored on a PCMCIAmemory card, which can be takenout and the temperature profilescan be downloaded to a PC. While

downloading, a different card canbe used with the temp-gard torecord the next baking process.Also included with the temp-gardsystem is temp-cart, data analysisand documentation software,which can transfer the measured

temperature profiles to the BYK­Gardner gradient-oven to simulatethe baking process in the labora­tory. Two different temperatureprofiles can be baked simulta­neously on a single test panel.Circle 408 on the reader service card

CLEANIR/DIGRIASIRCRC Industries Inc., Warminster, Pa.

CRC Super Degreaser, a nonchlo­rinated, nonconductive, noncorro­sive, nonstaining cleaner/de­greaser, dissolves grease, oil,corrosion, and sludge. It evapo­rates quickly and leaves no resi­due. It offers fast, effective clean­ing and degreasing for electricalcomponents, air tools, mechanicalbrakes, clutches, chains, bear­ings, generators, and compres-

Electroplating of Zinc Diecastingsby S.K. Jalota

225 pages $90.00This hook provides a tluite exhaustive coverage of plating on zinc die castings startingwith design and production with emphasis on its relation to plating. Subsequent chap­ters tfeat polishing, bufting and mass finishing, cleaning and pretreatment, and theelluipment for plating. The balance of the book runs the gamut of the various metalsrhar can be deposited. Each chapter devotes a portion to troubleshooting, causes ofdefects, and remedies. Concluding chapters concern coloring, lacquering, stripping ofdeposits, and analysis and testing.

Send Orders to:

METAL FINISHING660 White Plains Rd.

Tarrytown, NY 10591-5153For faster service, call (914) 333-2578or FAX your order to (914) 333-2570

.\111" ,ok oldlT' lilli" J". plq',lId. I'k,,,,' lIlellll!<- 5~.11!1 'ilipping and handling for dtlinry of each hook via liPS in the U.S" SlIl.llll for each book shippedl·'pn· ... ' In f .1I1.1t1.I, .Illd S211.110 fU1" l',Kh hook :-;hlppnll'xllfl':--S to all lJlhc..·r countries.

58 Metal Finishing