2

Click here to load reader

OPAQUE PRODUCTS - TPE (TPO) SHEETS O8010 TPE/TPOtemp63.webbplats.se/Files/Documents/datasheet/O8010 TPE-TPO_1… · O8010 TPE/TPO TPE (TPO) - The O8010 is a mineral modified thermoplastic

Embed Size (px)

Citation preview

Page 1: OPAQUE PRODUCTS - TPE (TPO) SHEETS O8010 TPE/TPOtemp63.webbplats.se/Files/Documents/datasheet/O8010 TPE-TPO_1… · O8010 TPE/TPO TPE (TPO) - The O8010 is a mineral modified thermoplastic

O8010 TPE/TPO

TPE (TPO) - The O8010 is a mineral modified thermoplastic

elastomer (TPE) which is polyolefin (PP) based, hence also

named thermoplastic polyolefin (TPO). It combines the high

impact strength of elastomers with the stability and proces-

sability of a thermoplastic material. The sheets are easy to

thermoform and to fabricate. The material can be recycled

like all thermoplastic materials.

ALSO AVAILABLE IN:

• O8013, with a UV stability package that makes it suitable

for outdoor use applications.

RECYCLING

Our total recycling concept (TRC), is a major advantage in

todays environmentally friendly market. The TRC concept

covers all types of sheets to provide you with cost saving.

Off-cuts from the sheets can be used in production of new

sheets by co-extruding virgin material as the top layer. Care

is taken that all quality requirements are met.

OPAQUE PRODUCTS - TPE ( TPO) SHEETS

O8010 TPE/TPO BENEFITS:

• Mineral modified for improved properties

• Very high impact strength at low temperatures

• Good chemical and abrasion resistance

• Good noise damping properties

• Easy to thermoform

• Good weathering performance with uv stabilized

version

APPLICATION AREAS:

Thermoformed parts for very tough outdoor auto-

motive applications.

DELIVERY PROGRAM:

Standard size: 1250 x 2050 mm

Max width: 1250 mm others upon request

Thickness range: 2 – 8 mm

Colours: Black and grey, others upon request

Embossing: 00/00, 00/35, 00/40, 00/55

Version 2014-08-20

Page 2: OPAQUE PRODUCTS - TPE (TPO) SHEETS O8010 TPE/TPOtemp63.webbplats.se/Files/Documents/datasheet/O8010 TPE-TPO_1… · O8010 TPE/TPO TPE (TPO) - The O8010 is a mineral modified thermoplastic

O8010 TPE/TPO TECHNICAL SPECIFICATIONS

Property Value Unit Standard

Mechanical properties

Izod impact, notched +23 °C 65 KJ/m2 ISO 180

Elongation at yield (at break) 300 % ISO 527

Flexural modulus 1200 MPa ISO 178

Charpy unnotched impact strength +23 °C No Break KJ/m2 ISO 179

Tensile strength at yield (at break) 21 MPa ISO 527

Izod impact strength -20 °C, notched 34 KJ/m2 ISO 180

Charpy Impact, notched 3 mm +23 °C 64 KJ/m2 ISO 179

Charpy Impact Strength -20 °C 8 KJ/m2 ISO 179

Physical properties

Density 0,97 g/cm3 ISO 1183

Thermal properties

Vicat softening temperature 138 °C ISO 306

Arla Plast AB • BOX 33, Västanåvägen • SE 590 30 Borensberg • Sweden Phone +46 141 20 38 00 • Fax +46 141 414 30 • E-mail: [email protected] • www.arlaplast.com

Properties reported here are typical values. Arla Plast makes no representation that the material in any particular shipment will conform exactly to the values given. The above information is based upon experience and given in good faith. Due to many factors which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information. Detailed product specification and technical manual/information is available on request.