1
C E R T I F I C A T E I-722217263/20 The company OFFICINE MECCANICHE DECA S.r.l. VIA GALILEO GALILEI 2 I-20090 SEGRATE (MI) has been audited according to AD 2000-Merkblatt HP 0 The company has proved to dispose of the prerequisites for the manufacture of pressure equipment as defined in Pressure Equipment Directive 2014/68/EU Independently to this conformation the procedures belonging to the chosen modules have to be observed. The company - has facilities permitting manufacturing and inspection in compliance with the current technical standards, - operates a quality system which guarantees that manufacturing and inspection of the products stated in our report are in conformity with the technical rules and standards, - employs qualified supervisory and inspection personnel. The scope of the audit is detailed in our report no. 722217263/20 The certificate expires on March 2023 Milan, 30/03/2020 TÜV SÜD Industrie Service GmbH Zertifizierungsstelle für Druckgeräte _________________________ Paolo Marcone Notified body, ident no. 0036 TÜV SÜD Industrie Service GmbH, Department Material and Welding Technology Westendstraße 199, D-80686 München

OFFICINE MECCANICHE DECA S.r.l. · OFFICINE MECCANICHE DECA S.r.l. VIA GALILEO GALILEI 2. I-20090. SEGRATE (MI) has been audited according to. AD 2000-Merkblatt HP 0. The company

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: OFFICINE MECCANICHE DECA S.r.l. · OFFICINE MECCANICHE DECA S.r.l. VIA GALILEO GALILEI 2. I-20090. SEGRATE (MI) has been audited according to. AD 2000-Merkblatt HP 0. The company

C E R T I F I C A T E I-722217263/20

The company

OFFICINE MECCANICHE DECA S.r.l.

VIA GALILEO GALILEI 2

I-20090 SEGRATE (MI)

has been audited according to

AD 2000-Merkblatt HP 0

The company has proved to dispose of the prerequisites for the manufacture of pressure equipment as defined in

Pressure Equipment Directive 2014/68/EU

Independently to this conformation the procedures belonging to the chosen modules have to be observed.

The company

- has facilities permitting manufacturing and inspection in compliance with the current technical standards,

- operates a quality system which guarantees that manufacturing and inspection of the products stated in our report are in conformity with the technical rules and standards,

- employs qualified supervisory and inspection personnel.

The scope of the audit is detailed in our report no. 722217263/20

The certificate expires on March 2023

Milan, 30/03/2020TÜV SÜD Industrie Service GmbH

Zertifizierungsstelle für Druckgeräte

_________________________ Paolo Marcone

Notified body, ident no. 0036

TÜV SÜD Industrie Service GmbH, Department Material and

Welding Technology

Westendstraße 199, D-80686 München