Embed Size (px)
DESCRIPTION
Katalog nowej odzieży ochronnej firmy Portwest (2012)
Citation preview
FLAME RESISTANT PRE RANGE
PORTWELEADING EXPERTS IN FLAME RESISTANT PPE
Manufacturing since 1904
Independently Audited Quality System
All Ranges Fully Certified to Latest EN Standards
Market leader in Flame Resistant, High Visibility, Footwear and PPE
What really sets Portwest aside from our competitors is that we understand the needs of our distributors betterthan anyoneelse does. Through our experience of selling to resellers only, we pride ourselves in supplying the right product, at the righttime, at the right price and providing a one stop shop for distributors.
Portwest provides a unique range of services to our customers, coupled with experience, commitment and passion ineverything that we do. Our vast array of services include bespoke service garment production, a stock storage facility,complete garment personalisation, and large distribution centres throughout Europe. We also offer a same day servicewhere orders are picked and dispatched within four hours.
ETHICAL PRACTICES
At Portwest we strongly believe in worldwide ethical practices and principles.
FULL EN TESTING AND CERTIFICATION
Each Portwest EN Standard product is tested and certified by an independent test house. These certificates are availablefor customer download at our website www.portwest.info. This ensures all Portwest safety products meet and comply withrecognised EN standards. In addition every Portwest product goes through rigorous and routine in-house testing to ensurethe complete product range is of the highest quality.Portwest Ltd is a member of SATRA, the industry's leading research and technology centre, employing scientific, technicaland support staff in the UK and China. The brand is recognised and respected in over 70 countries. Portwest is also a memberof BSl, which is the National Standards Body of the UK, with a globally recognised reputation for independence, integrity andinnovation in the production of standards that promote best practice.
YOUR SAFETY IS OUR BUSINESS
FOUNDRIES MANUFACTURING OIL & GAS POWER GENERATION PORTS & SHIPPING
ELECTRICAL MINING UTILITIES ONSHORE/OFFSHORE WELDING & ALLIED PROCESSESSTEEL MAKING FIRE FIGHTING OIL HANDLING/TANK CLEANING PETROCHEMICALAIRCRAFT RESCUE WELDING CHEMCIAL HANDLING
REACH COMPLIANCE
Portwest confirms our full compliance under REACH legislation and we are fullysupportive of worldwide industry efforts to phase out the use of chemicals wherepossible in the manufacturing process. We are committed to continually reducingour impact on the world
'
s natural environment, and we work closely with suppliers
to identify and rapidly eliminate hazardous substances from our products.
PORTWEST: providing your solution to REACH compliance, For details of yourlegal obligations under REACH, please refer to http://echa.europa.eu
Certificate
of Registration
jfe
-Jl
CONTENTS
RANGE PAGE MODAFLAMEKNIT 24
iCNIS ALUMINISED FIRE RANGE 2 BIZFLAME MULTI 26
IGNIS FIRE ENTRY RANGE 4 BIZFLAME PLUS 28
IGNIS PROXIMITY RANGE 6 BIZFLAME WORK 34
IGNIS APPROACH RANGE 8 SEALTEX FLAME 35
SOLAR STRUCTURAL FIRE SUITS 10 BIZFLAME RAIN 36
SOLAR 5000 FIRE SUIT 12 WILDLAND FIRE PROTECTION 39
SOLAR 4000 FIRE SUIT 14 BIZWELD 40
SOLAR 3000 FIRE SUIT 16 BIZWELD HI VIS 43
SOLAR 2000 FIRE SUIT ,8 . % BIZWELD MOLE 44
FLAME RESISTANT RANGE 20 SAFE WELDER 45
ARAFLAME 22 BIZTEX FR 45
NOMEX GORE-TEX RANGE 46
MOD AFLAME FOOTWEAR AND ACCESSORIES
KEY SYMBOLSPRODUCT DETAIL SYMBOLS
&Layer Symbol
This symbol, indicates the number of[ayers used within a garment
WPart of a Set
This symbol indicates that the garmentis certified to a certain standard onlywhen all items are worn together.
©Radio Pocket
This symbol, indicates that the garmenthas a universal radio pocket
©Certified
This symbol indicates conformityof essential health and safetyrequirements as set out in EuropeanDirectives.
&Mobile Phone
This symbol indicates that the garmenthas a mobile phone pocket
i? Flexi Fit
This symbol indicates the Portwestflexi-fit waist b3nd system which allowsfor added freedom of movement.
©Half Elastic
This symbol indicates a Half Elasticwaistband on trouserwhich allows for
all-day comfort for the wearer,
y Kneepad PocketsThis symbol indicates that thegarmenthas specially designed kneepadpockets
@ Taped SeamsThis symbol indicates that the garmenthas taped waterproof seams.
Welded Seams
This symbol indicates that the garmenthas high frequency welded waterproofseams.
© GO/RT SymbolThis symbol indicates that the garmentmeets the Rail Industry Standard forHigh Visibility warning clothing.
toBreathable Garment
This symbol indicates that the garmentis made of a breathable, waterprooffabric.
rHood SymbolThis symbol indicates that the garmentcomes with a non detachable hood
$ Detachable Hood SymbolThis symbol indicates that the garmentcomes with a detachable hood
feji Carton QuantityThis symbol indicates the quantity ofproducts in a carton which do not haveinner boxes.
rGarment HangerThis symbol indicates products arepacked with a hanger and retailpackaging for display in retailoutlets Ask the sales team for moreinformation
rRetail BagThis symbol indicates that thispackaging aids product presentation for Iretail sales. All other styles are packedin flat-pack plastic bags to keep itemsclean. All products have barcodes. Askthe sales team for more information.
I AWMMI vvwwW Fabric
This symbol indicates garmentfabric details
1Contrast Fabric
This symbol indicates thegarment contrast fabric details
LiningThis symbol indicates thegarment lining details
¥ V V Y WaddingThis symbol indicates thegarment wadding details
..IB X-Colour
This symbol indicates thestandard colours within that
product range
p Y-Colour
This symbol indicates the deepdye colours within that productrange
Z-Colour
This symbol indicates the verydeep dye colours within thatproduct range
r>* UpperThis symbol indicates thematerial used in the upper ofthe product
1
Sole
This symbol indicates thematerial used in the sole of the
product
The Fabric was specificallydesigned for the manufacture offlexible and comfortable garmentsused in close proximity or entry intohigh intensity fires.
Extremely lightweight - 330gm, andpliable, the outer-shell fabricis constructed from 95% Meta-
aramid and 5% Para-aramid. The
mirror-like surface reflects radiant
heat away, allowing close flameproximity while reducing the rateof heat absorption that can lead tothermal fatigue.
The integration of additional innercarbon felt linings ensure superiorprotection and performance in theextreme work environments faced
by civilians, emergency service,military personnel and in industriessuch as aircraft rescue, aircraftfirefighting, bulk flammable liquidsand similar situations involving highlevels of radiant heat.
EN 1486
This European Standard specifiestest methods and minimum
performance requirements Forreflective protective clothing usedin specialised fire-fighting.
This clothing provides protection against flamelick and intense radiant heat and is worn For
short periods only, to enable the fire-fighter toenter specific high - risk fire-fighting and firerescue situations which also require the use ofbreathing apparatus.
This standard only covers protective clothingthat relies upon the ability of the outer materialto reflect intense heat. This type of reflectiveclothing may also be used for industrialapplications involving high levels of radiantheat.
EN 1484:2007
Flame SpreadHeat Transfer [Radiation]
Heat Transfer [Connective)Contact Heat
Heat Resistance
Dimensional ChangeTensile StrengthBurst StrengthTear StrengthSeam StrengthSurface WettingWhole Garment Testing (Optional!
EN ISO 11612
The performance requirements setout in this international standard are
applicable to garments which couldbe worn for a wide range of end uses,
where there is a need for clothing with limitedflame spread properties and where the user can beexposed to radiant or convective or contact heat ormolten metal splashes.
Code A; Limited (tame spreadCode B: Protection against Convective Heat - 3 levelsCode C: Protection against Radiant Heat - 4 levelsCode D; Protection against Molten Aluminium
Splash - 3 levelsCode E; Protection against Molten Iron Splash - 3
levels
Code F: Protection against Contact Heat - 3 levels
EN ISO 11612:2008
Dimensional changeLimited Flame Spread [A1+A2IConvective heat IB)Radiant Heat IC)Molten Aluminium Splash ID)Molten Iron Splash [ElContact heat IF]Heat Resistance
Tensile strengthTear strengthBusting strengthSeam strength
Layering StructureThe Ignis Aluminised Suits are constructed with the following outer, mid ahd inner layers:
0 Outer Ignis Aluminised Shell:The Ignis Aluminised 330gm outer shell fabric is made of special heat and flame resistant textileswhich, when exposed to fire, char instead of melt or combust, thereby reducing further injuries thatcan be caused by the ignition of the materials.
©Mid Thermal Liner:Constructed of layers of 120gm Carbon Felt - a flame-resistant, non-woven fabric. The thicknessof the felt also insulates the wearer from the effects of extreme heat encountered during structuralfire fighting operations.
0 Inner Thermal Liner:An inner layer of 125gm Aramld Viscose - an anti-flame woven fabric that provides Stability andstrength.
All Ignis garments are made in Europe
2 Sewn With Kevlar® Thread
Aluminised Range ApplicationsSelection of appropriate PRE is based on a risk assessment made by the user according to the EuropeanDirective 684/89 EC, There are 3 types of Aluminised RefLective CLothing
Fire Entry Range:Constructed with 7 layers of heat resistantmaterials, the Ignis Fire Entry suit provides themaximum in heat protection and requires theuse of a self contained breathing apparatus toprovide breathable air to the wearer.
These suits provide full body coverage andare worn for entry into extreme heat andsituations requiring protection from totalflame engulfment. These suits are certified toEN 1486:2007
Fire Entry SuitApplications:
. Total flame engulfment
5EN I486
Proximity SuitApplications:
Aircraft rescue
Aircraft firefightingBulk flammable liquids firefightingFlammable gas firefightingSimilar situations releasingHigh levels of radiant heat
Proximity RangeProviding full body coverage including thehead, hands and feet and with one layerof thermal lining, the Proximity garmentsprovide excellent protection from radiant heatand high temperatures.
Due to the high ambient temperatures thatthe wearer can be subjected to, it is suggestedthat the Ignis Proximity suits are worn with abreathing apparatus to provide breathing airat normal temperatures,
The Proximity garments, certified to EN 11612,are used for aircraft rescue .aircraft firefightingand proximity of high temperatures Ibut notentry into direct flannel.
Approach Range:Certified to EN11612
. this range is constructedwith the ignis outer shell with some itemshaving additional internal layers for increasedheat resistance.
This range of PPE is used for industrial workinvolving high temperatures such as steelmills and smelting facilities and does notrequires breathing apparatus to be worn.
Approach SuitApplications:
. Airport personnelAluminium industry
. Automotive industryCement industry
. Ceramic industryEngineering
* Foundry workers. Glass industry. Iron & steel industry
Railways. Shipbuilding
Welding
| J1 Radiant Heat Reflectivity
"
Fire Entry" RangeCertified to EN14-86:2007 and designed for maximum personal fire protection, the three piece Ignis Fire Entry Suit ishighly engineered to support the most extreme conditions. The insulation capabilities make the Ignis Fire Entry Suitsthe top choice for entry into intense heat and total flame engulfment.
AM32 Fire Entry Gloves AM31 Fire Entry Overboots
These high heat-resistant, five layered gloves reflectradiant heat while the carbon lining helps reduce heat conduction,The Ignis Fire Entry Gloves must be worn with the AM30 Fire EntryCoverall and the AM31 Fire Entry Overboots.
SCCDCC3 IGNIS, 95% Meta-aramid, 5% Para-aramid, 33Q<jm -1 layer
i Mid Layer: Carbon Felt 120gm - 3 layersInner Layer: Aramid Viscose 125gm -1 layer
Q
a i
Designed to fit over atl boot sizes, these seven layered,heat resistant, Fire Entry Overboots reflect radiant heat while the carbon
lining helps reduce heat conduction. The Para-aramid soles offer excellentabrasion resistance. The Ignis Fire Entry Overboots must be worn with theAM3Q Fire Entry Coverall and the AM32 Fire Entry Gloves,
CXCCX3 IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layer[VVvVvVVlmmmi
Inner Layer: Aramid Viscose 125gm-1 layerSoles: Para-aramid M5gm
I"'I"I,"IB
a I ©
AM33 Replacement Glass Visor
EN 166:2004 , EN 171:2003
Replacement visors available to purchase separately.
TSD Clear, One size
rmD
Technically Engineered For Extreme Conditions
AM30 Fire Entry Coverall
This seven layered, one-piece coverall, constructed with our highperformance Ignis fabric, remains Lightweight and extremely flexible,Certified to EN1486:2QD7, this suits is tailored to tie worn with aself contained breathing apparatus (SCBAl for protection in hostileatmospheres. Faceshield protection is provided by a multi-layered systemof tempered glass and reflective gold on a heat resistant lens. The hoodshave excellent lateral and vertical visibility.
N-W AAA
Ultra Flexible Fabric
INJ H "Proximity" RangeThe Portwest Proximity Suit is a 3 piece ensemble consisting of a Coverall, Hood and Overboots. Certified anddesigned to be worn together, the Proximity Suit provides protection in the most extreme radiant heat conditionswhile maintaining the comfort and quality features that our customers demand.
AM22 Proximity Overboots
EN11612:2009 A1, B2,C4,D3,E3.
Designed to fit over all boot sizes and to be worntogether with the AM2Q Proximity Coverall and the AM21 Hood,
the heat resistant Proximity Overboots reflect radiant heat whilethe carbon lining helps reduce heat conduction. The Para-aramidsoles offer excellent abrasion resistance.
AM21 Proximity Hood
EN 11612:2009 A1, B2,C4,D3,E3.INNER HELMET: EN397
TEMPERED GLASS VISOR: EN 166:2004
REFLECTIVE GOLD VISOR: EN 171:2003
IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layerlyWVWU
Inner Layer: Aramid Viscose 125gm -1 layer5oles:Para-aramicf 645gm
EfiEB Silver, or
Designed to sit comfortably and to be worn with the AM20 ProximityCoverall and the AM22 ProximilyOverboots, the Proximity Hood featuresan inner hard cap that complies with EN397. The gold colour, removableglass visor with the internal protective layer made of polycarbonateallows for excellent lateral and vertical visibility. An allowance is alsomade for a face mask and dispenser.
I
CXICCC3 IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layer
-
"Will Silver
« 'i V
Extreme Heat Protection
ce v s
n
AM2G Proximity Coverall Kevlar®
stitchingthroughoutEN11612:2009 A1, B2,C4, D3, E3. EN340:2004
Constructed using the high performance IGNIS fabric, and
combined with a carbon felt quilted to an Aramid Viscose inner layer,this one piece coverall remains lightweight and extremely flexible.Designed to be worn with the AM21 Hood and the AM22 Overboots.Features include an integrated back pocket on the back for abreathing apparatus, inner and outer front protective flap openingand velcro adjustment on the side leg. All seams are assembledusing a strong Kevlar thread. Concealed
front velcro
IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layerMid Layer: Carbon Felt 120gm -1 layerinner Layer: Aramid Viscose 125gm -1 layerSilver, M-2XL
(uVWWVj
Tapered sleeve and leg end,designed to sit comfortablebeneath gloves and overboots
AM23/AM24 Proximity/ Approach Gloves
EN388 4-44-3, EN407 4-3-3-3-4-X, EN420 LEVEL 3
Available in a choice of two cuff lengths, the AM23(35cms] and
the AM24 I45cms) reflect radiant heat while the carbon innerlining helps reduce heat conduction. The Para-aramid paLmsoffer excellent abrasion resistance.
IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layerMid Layer: Carbon Fell 120gm -1 layerInner Layer: Aramid Viscose 125gm -1 layerSilver
AM 23 = 35cmA.
rvvvwvvi
Ve'cro
adjustmenton outer leg
AM23 (35 cm)AH2A (45 cm|
Innovative Fabric - Maximum Protection
Approach" RangeExtremely Lightweight and flexible, the Ignis Approach Range is perfect for applications involving very hightemperatures, such as steel mills and smelting facilities. Garments in the Approach Range are manufactured withminimal bulk insulation layers allowing additional flexibility and freedom of movement.
Concealed
front veLcro
opening
AM11 Lined Approach Coat - 3 LayerAM10 Unlined Approach Coat -1 Layer
AM11: EN11612:200?A1, B2.C4.D3.E3. EN34-0:2004AM10: EN ISO 11612:2009 A1, B1.C3.E3, EN340:2004
Constructed with the highly reflective Ignis fabric and designed to be usedwhere high heat reflective properties are required. The AM 11 lightweightlined coat is similar in design to the AM 10 but is constructed with an,additional inner thermal layer increasing the heat resistant properties.
SCXCC3 IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layer
hhh id LaytAM11: Inner Layer: Aramid Viscose 125gm-1 layer
FW'TD Silver, M-2XL
AM15 Lined Approach Trousers
EN11612:2009 A, B1.C3 EN340:2004
Worn as part of a set, the aluminised trousers providesthe wearer with protection from radiant heat and high temperatures.Features include an economically shaped knee, back bib and elasticatedadjustable shoulder braces.
IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layer
Inner Layer: Aramid Viscose 125gm-1 Layer"! "1ID
® $ a i m
! Fully CE Certified And Made In Europe
AM 14 Lined Approach Jacket EMEN 11612:2009 A, B1.C3 EN340:2004
The alumimsed jacket is constructed with our highperformance Ignis fabric, offering the wearer protection against hightemperatures and radiant heat, Worn as part of a set, the articulate designincluding the raglan sleeve and upper back bellows allows completefreedom of movement, Features include an inside velcro closure pocket,
Inner Layer: Aram id Viscose 125gm-1 layerWlH
* ' 1- if
AM12 Unlined Approach Bib Apron
EN ISO 11612 A1, B1,C3,E3, EN34C:2004
Perfect for the demands of a foundry, this bib apron willprotect the wearer from radiant heat and molten iron splashes. Finishedsize is 70cms wide X lOOcms in length.
SCCCCCC3 IGNIS, 95% Meta-aramid, 5% Para-aramid, 330gm -1 layer!,"l",i",lP ier mx1
Velcro closure
Stud cLosure
sole strap
AM13 Approach Gaiters
EN ISO 11612 A1, B1,C3,E3«
Designed to fit over all boot sizes, these heat resistantgaiters reflect radiant heat. Features include velcro closure on the centreback and stud closure sole strap.
ieta-aramid, 5% Para-aramid, 330gm -1 layer1,WrO Silver, One Size
Extremely Lightweight And Flexible
JL '
The Solar Fire Suit can endure highlevels of heat for brief periods of timewithout themselves combusting andburning and therefore minimisesbody burn percentage when exposedto heat and flames.
The Solar Structural Fire Suits have
three components: an outer shella moisture barrier, and a thermal
barrier, all serving a differentfunction. The outer layer protectsagainst flame injury and burnscaused by conductive heat. Themoisture barrier protects againstwater penetration and allowinginternal moisture vapour to escape.
It is imperative that the layers arekept dry to avoid the transfer of heatin a corvective manner from the
outer layer through the layers to theskin, The inner thermal barrier and
lining offers protection against heatfrom proximity to flame. In betweeneach of these layers are pocketsof air and together with the fabriclayers, they help to further insulatethe wearer from the extreme
environments of fires,
EN 469
XfZ This European Standard specifies minimum levels of performancerequirements for protective clothing to be worn during fire fighting
operations and associated activities.Z2 Suits shall provide protection for the firefighters torso,neck, arms to
' the wrists, and leg to ankles during firefighting activities.
A generous overlap suitable for all body movements shall be maintained between thejacket and trousers.
ENj+69:2006 Level 2 Fire Suits
EN4.69:2006
Flame SpreadHeat Transfer iFlame]Heat Transfer (Radiationl
Residual StrengthHeat Resistance
Tensile StrengthTear StrengthSurface WettingDimensional ChangeResistance to penetration by Liquid ChemicalsResistance to Water Penetration
Water Vapour ResistanceErgonomic RequirementsVisibility - ReflexWhole Garment Testing (Optional)
Explaining the standardEN4f>9:2006 Level 2 Fire Suits is the higher requirement for structural fire fighting and is
used by professional trained firefighters.
Xf2 All Level 2 Fire Suits will be marked internally as follows:Xf2 Level 2 - Performance in Heat Test: Flame,
Xr2 Level 2 - Performance in Heat Test: Radiation.
Y2 Level 2 - Resistance against Water PenetrationEN 469 . Z2 Level 2 - Resistance against Water Vapour Resistance
Level 2 Suits must include a waterproof moisture barrier
Convection:Converted heat travels through the air,even if there is no immediate appearanceof fire.
Radiation:Radiation is the transfer of heat into a
material, directly from flames or reflectedfrom hot objects.
Types of Heat Transfer:There are three types of heat transfer in a fire that could cause burns
Conduction:A conductive heat bum wilt occur if the
wearer touches a heated surface or
object.
Layering StructureSolar Structural Fire Suits certified to EN469: 2006, Level 2 are constructed with the
following layers:
0 Outer Layer:The outer shell layer is a high-heat and flame resistant material, which provides initialprotection against heat, flame and abrasion and protects the inner liner
©Moisture Barrier:The PU coated moisture barrier reduces the amount of water from the environment that
might penetrate to the inside of the garment. Another important aspect of moisture barrierprotection is the ability to
"
breathe", promoting evaporative cooling of the fire fighter
'
s body.
0 Thermal Liner:The thermal barrier consists of 2 layers of fabric - an inner lining attached to an insulationlayer. Together these provide an air pocket to protect the wearer against external heatsources. The suits are designed to be as light as possible without compromising the safetyof the wearer
, or to the quality of the garment,
Quick Release zipThe Quick Release zip features in all the Solar Fire Suits. The design of this zip enables the wearer to quicklyopen the zip from the top. By pulling up the slider sharply, the slider will become disengaged and release fromone side of the zipper teeth. This acts as a quick opening and is used for safety reasons in protective clothing
m Sewn With Aramid Thread 11
03035000Structural Fire Suit
EN 469
EN469:2006 Level 2
FBI Matrix™ employs a durable power grid, weaving high-strength Aramid filaments into the PBI Gold fabric™ toenhance and reinforce its resistance to wear and tear while retaining its superior flame and heat protection. The PBIMatrix™ outershell ensures the Solar 5000 Suit delivers outstanding thermal protective performance and resistanceto high heat and direct flame, while also offering enhanced abrasion, durability and tear resistance. The ergonomic,innovative and functional design reduces firefighters stress while making it easier to bend, crawl, kneel or climb.
3M Scotchlite"Reflective Material
© 10 @ FR,IW
Tab Si vetcro
adjustment atsleeve end
Quick release
front neck
Exceeding alt the requirements of EN469, the SolarFB50 Overcoat is perfect for today,s demands of structuralfirefighting. Features include brass quick release zip.
underarm
gusset for increased mobility, para-aramid knitted cuffs withthumb-loop and aramid thread used throughout on all seamsandtop sewing. The collar is designed to sit neatly with all helmets.
FR Non Woven
left chest
all models
FB50 5000 Overcoat t m
EM469:2006 LEVEL 2 EN469
PBI Matrix™, 60% Kevlar®, 40% PBI Fibres™,
205gmMoisture Barrier: FR non woven with PU membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Aramid/Viscose FRGold, S-2XL
Combined Weight
5359m Aramid/Viscose FR
I111!1.|Q
FR Non Woven fabric
with PU Membrane
mU!
Anti wicking strip at hem
Inner knitted cuff
with thumb loops
Lower front pocketswith velcro closure
PBI Matrix™
Quick release front zip PBI™ Matrix fabric
,J Outstanding Thermal Protection
FB51 5000 Over trousers
EN469:2006 LEVEL 2
Like the FB50 Overcoat, the FB51 Solar Over trousers are completely
lined and waterproof The elasticated side waistband allows the garment tosit comfortabty on the waist when worn. Features include EN471 compliantreflex
, antiwicking strip on the teg ends and vetcro closure front fty with aprotective inner gusset.
PBI Matrix™, 60% Kevtar®, 40% PBI Fibres™, 205gmMoisture Barrier: FR non woven with PU membrane
Thermal Layer; FR non-wovenInner Thermal Layer: Ara mid/Viscose FRGold, S-2XL
© % trd © FR,IWKevtar® is a trademark of company DuPont
PBI Matrix™ in togo form is a registered trademark of PBI Performance Products Inc.!
IA Enhanced Abrasion And Tear Resistance
ESlETlAonoStructural Fire S
EN469:2006 Level 2
Extremely lightweight at 510gm, the 4 Layer assembly provides exceptional heat resistance with a 2nd degreeburn result of just 1% in the Dupont Thermo-Man® test. An industry bestseller, the SoLar 4000 is economicallyengineered to reduce fabric bulk while maximizing mobility.
EN 469
Throat tab on front neck
Quick release
brass front zi UniversaL radio pocketwith microphone loop
Inner knitted
cuff with thumb
loops
FB4-0 4000 Overcoat
EN469:2006 LEVEL 2
mXr2 IY?
EN 469
Worn as part of a two piece suit and combinedwith 4 layers of fabrics including a moisture barrier andthermal barrier
, the FB40 Overcoat remains lightweight andextremely flexible allowing maximum freedom of movement.The red-silver-red reflex combined with the contrast colour
panel on the upper back enables individual identification.Knitted Nomex® cuffs with thumb-loops hold the sleeve endin place when gloves are worn, The quick release brass zipaids a speedy removal if required.
MMMt Nomex® OutershellTough, Ripstop, 195gmmhm Moisture Barrier: FR non woven with PU
membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Nomex® Comfort
1ID Navy, S-2XL
© i) 10 © f«''W
Anti wickingstrip at hem
Lower front
pockets withvetcra closure
Tab & vetcra
adjustment atsleeve end
Combined Weight
510fm
Nomex® Tough
FR Non Woven fabric
with PU Membrane
FR Non Woven
Nomex® Comfort
Quick retease front zip
Extremely LightweightI J
FB41 4000 Over trousers
EN469:2006 LEVEL 2
Features an the trousers include cargo pockets onthe side tegs, tapered leg end with a zip and gusset to allow forexpansion if required when worn over boots. Side opening onthe knees pocket allows for removal or addition of kneepads.
Nomex® Outershell Tough, Ripstop, 195gmMoisture Barrier: FR non woven with PU
membrane
Thermal Layer: FR non-wovenInner Thermal layer: Nornex® ComfortNavy, S-2XL
© © (O ©Nomex® is a trademark of company-DuPont-
Exceptional Heat Resistance
E3EI33000Structural Fire Suit
g-
|Xf2
EN 469
EN469:2006 Level 2
Incorporating a Nome*® OutersheLL, the Solar 3000 Structural Fire Suit has been developed to offermaximum protection for the firefighters while at the same time guaranteeing superior comfort.Providing excellent colour and light fastness, the Nomex® outer is also extremely durable and stabledue to the use of both the Meta-aramid and Para-aramid fibres,
Throat tab or front neck
Quick release
brass front zip Universal radio pocketwith microphone loop
FB30 3000 Overcoat
EN469:2Q06 LEVEL 2EN 469
Constructed using the high performance NomexTough fabric, and designed to be worn with the Solar FB31Over trousers
, the Solar FB30 Overcoat provides ideal
protection against the risks of exposure associated with firefighting and related tasks. Features include a quick releasefront brass zip, lower front pockets with press stud forholding gloves and knitted cuffs with thumb-loops to holdsleeves in place.
Nomex® OutersheLL Tough, Twill, 195gmMoisture Barrier: FR Knitted Fabric with PU
membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Aramid/Viscose FRNavy,S-2XLI.a
© # M © FR,IW
Tab & velcro adjustmentat sleeve end
Knitted inner cuff
with thumb loops
Anti wickingstrip at hem
Press studs for
hanging gloves
Combined Weight
600'm
Nomex® Tough
FR Knitted fabric
with PU Membrane
FR Non-woven
Aramid/Viscose FR
Quick release front zip
3M Scotchlite S.Reflective Material
" Maximum Protection, Superior Comfort
Braces designed to sitcomfortably on shoulders
25cm front fly opening
3M Yellow/Silver Reflex
FB31 3000 Over trousers
EN469:2006 LEVEL2 enW
Designed to protect the Lower body, the SoLar FB31 Over trousers areconstructed with the same Layers as the SoLar FB30 Overcoat. Thedesign offers high freedom of movement. Features include a low-cutcrotch seam, non detachable shoulder braces, side eLastic and bellow
front fly.
Nomex® Outershell Tough, Twill, 195gmMoisture Barrier: FR Knitted fabric with PU membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Aramid/Viscose FR
n110 Navy, S-2XL
Nomex® is a trademark of company DuPont
17
EaEH2oooStructural Fire Suit
a
liliii
/s
|L
EN 469
Xf2
Xr2
Y2
22
® ., .
,
EN469:2006 Level 2
Offering exceptional value the SoLar 2000 Structural Fire Coat and Trousers provides a practical and comfortable optionthat conforms to EN 469:2005, Level 2 performance when worn as a suit. The Solar 2000 was designed and developed tomeet the demanding performance needs and work environments of a firefighter.
Under arm
gusset
Throat tab on front neck
Universal radio
FB20 2000 Overcoat
EN469:200i LEVEL 2 EN 469
Offering complete upper body protection, theSolar FB20 Overcoat has been designed with the safety andprotection of the wearer in mind. Features include a quickrelease zip, 3M triple trim reflex that conforms to EN471,underarm gusset for increased mobility, knitted cuffs withthumb-loops to hold sleeves in place.
Meta-aramid, Para-aramid, Antistatic fibre, Twill
215gmMoisture Barrier: FR Knitted fabric with PU
membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Aramid/Viscose FRNavy, S-2XL
© # M © FR,IW
Internal knitted cuff
Tab & velcro
adjustment atsleeve ends
Press studs for
hanging gloves
I i ff
,
§
Quick release front zip
Combined Weight
550fm
Meta-Aramid,
Para - Aram id Twill
Fr Knitted fabric
with PU Membrane
FR Non-woven
Aramid Viscose FR
Practical And Comfortable
FB21 2000 Over trousers
EN469:200& LEVEL 2
Constructed with the same layers as the Solar FB20 Overcoat, the FB21
Over trousers are designed to protect fire fighters during fire-fighting andtechnical operations. Features include adjustable,
non-detachable shoulderbraces
, stud closure for extra security on top of fly, elasticated waistband toallow garment sit comfortable and neatly when worn and a leg end width thatis designed to fit over boots.
Wtmm Meta-aramid, Para-aramid, Antistatic Fibre, Twill 215gmKAA/WNAd
i Moisture Barrier: FR Knitted fabric with PU membrane
Thermal Layer: FR non-wovenInner Thermal Layer: Aramid/Viscose FR
.1ID Navy, S-2XL
EN 469
© © to © FR,IW
.111* 9
EN STANDARDS
The performance requirements setMr I out in this international standard
t -- \J are applicable to garments whichcould be worn for a wide range of
EN ISO 11612 end uses, where there is a need
for clothing with limited flame spread propertiesand where the user can be exposed to radiantor convective or contact heat or molten metal
splashes,
Code A: Limited flame spreadCode B: Protection against Convective Heat - 3levels
Code Ci Protection against Radiant Heat - 4 levelsCode D: Protection against Molten AluminiumSplash - 3 levelsCode E: Protection against Molten Iron Splash - 3levels
Code F: Protection against Contact Heat - 3 levels
I a EN531:1995 - Harmonised European
TV standard for protective clothing forV-J industrial workers exposed to heat
(excluding firefighters, and welders'EN 531 clothing)
The following categorisation states performancelevels:
A - limited flame spreadB - protection against convective heatC - protection against radiant heat
EN1149:2008 - Is the harmonised
European standard for protectiveclothing- protection against the dangercaused by static electricity, This
EN 1149 standard is not applicable for protectionagainst mains voltages.
. EN 1149-1:1996 Test method for surface
conducting fabrics.. EN1149-3:2004 Charge decay test method forall fabrics,
. EN 1149-5:2008 Performance requirements.
AATEX Directive
The ATEX Directive defines what
EX\ equipment is permitted in an environmentwhere an explosive atmosphere may exist.Portwest recommend using garmentscertified to EN 1149 and EN ISO 11611 for
added protection in an ATEX environment.
I i | This standard specifies theI I performance requirements for the
limited flame spread properties\/ of materials, material assemblies
EN ISO 14116 and protective clothing in order toreduce the possibility of the clothing burning andthereby itself constituting a hazard. Additionalrequirements for clothing are also specified.
EN 13034*2005 + A1:2009
Protective Clothing against LiquidChemicals
EN 13034
Performance requirements for chemicalprotective clothing offering limited protectiveperformance against liquid chemicals (Type 6 andType PB [6] equipment). This standard specifiesthe minimum requirements for Limited use andreusable limited performance chemical protectiveclothing. Limited performance chemicalprotective clothing is intended for use in cases of apotential exposure to a light spray, liquid aerosolsor low pressure, low volume splashes, againstwhich a complete liquid permeation barrier (at amolecular Levellis not required.
The standard covers both chemical protectivesuits IType 6) and partial body protection (TypePB[6]]. Chemical Protective suits (Type 6] coverand protect at least the trunk and the limbs, e.g,one piece coveralls or two piece suits, with orwithout hood, boot-socks or boot covers. Partialbody protection of similar Limited performance(Type PB [6]]covers and protects only specificparts of the body, e.g, coats, aprons, sleeves etc.
This international standard
specifies minimum basic safetyrequirements and test methodsfor protective clothing for use
EN ISO 11611 in welding and allied processes(excluding hand protection).
The international standard specifies two classeswith specific performance requirements.Class 1 is protection against less hazardouswelding techniques and situations, causing lowerlevels of spatter and radiant heat.Class 2 is protection against more hazardouswelding techniques and situations, causinghigher levels of spatter and radiant heat.
&EN4K82-2
EN41482-2:2007/IEC61482:2009
This standard investigates thefabric and garments ability toprotect against the thermal affectsof an electric arc event. This can be
done via two test methods;
IEC 61162-2
ATPV or E.,., = xxx tal/emi
Cluil«CI«i2
I EC 614S2-J
ATPV or Eitw = xxx oil/cm2
and
Class 1 or Class 2
Box Test Method EN6U82-1-2
The fabric/garment is exposed to an electricarc confined in a specific box with a specificelectrode arrangement for 0.5 seconds. Class 1is to a current of 4 kA arc, Class 2 is to a currentof 7 kA arc. Test conditions for class 1 & 2 try tostimulate typical exposure conditions for a shortcircuit current of4kA and 7kA respectively.
Open Arc Method EN61482-1-1The ATPV result (expressed in cal/cm2)represents the maximum incident thermalenergy in units of energy per square area that afabric can support before the wearer will suffer2nd degree burns,
This method tests the fabric with an 8 kA arc for
various incident durations.
Workers are assumed to be safe if the arc ratingof their clothes exceeds the electric arc incident
energy calculated in the worst case scenario of arisk assessment.
Garments can be layered to achieve an overallATPV Rating. For Example, ThermaLs mayachieve an ATPV of 4.3 Cal/m2, and an outercoverall may achieve an ATPV of 13.6Cal/cm2,However the combination ATPV will be greaterthan the sum of the two single layers, as the airgap between the two layers affords the weareradditional protection.
GOST-R
Russian GOST-R Certification
i Many Portwest products are nowto GOST-R standards,
that these products arefor sale and use in the
Federation market. The
certification process hasbeen created to protect consumers rights and to avoidthe import of poor quality products. Any productsentering the Russian Federation market should meetnational quality standards.The certification process for products may beeither obligatory or voluntary, for which there areregulations in place. This involves both domesticallyproduced, and imported goods into Russia.
Obligatory certificateAn obligatory certificate contains a profile of the goods
and confirms their compliance with the standards aslisted on the certificate of conformance,
Inspection is carried out by a specialist, on theproduction premises of the goods that requirecertification. On the basis of results obtained from
this, and through testing samples of the goods in alaboratory, an appropriate certificate of compliance isissued,
Voluntary Certificates
This type of certificate is for products where noformal legislation is laid down for their certification,but the importer/exporter still wishes to prove theirhigh quality,A certificate of conformance may be issued eitherfor a batch of goods or on ongoing production and its
validity varies. If a certificate is issued for a batch ofgoods, it will be valid for one shipment. For ongoingproduction items, certificates of conformance may bevalid from 1 to 3 years. Portwest have opted for thelatter version, so all our GOST-R certificates are valid
for the maximum period of 3 years.
These standards are currently being reviewed andupdated by the Technical Regulation to CustomsUnion TR CU 019/2011 (Safety of personal protectiveequipment) with the purpose of establishing theuniform requirements for PPE. Portwest will beupdating all their products to the new Legislationaccordingly, when the certification bodies receiveaccreditation to do so. The new legislation will be validin three countries - Russia, Belarus and Kazakhstanwhilst at the moment the G0ST R certificate of
conformance covers the Russian Federation only.
V
EN 1149
©EM ISO 11612
0 ffiEN 471 EN 61482-2 EN ISO 14116
5EN 1 3034 EN 343 EN 15614
©GOST-R
Fabric | Style Code\J
EN ISO 11611
IMOMEX
NX50 / / /
AHThSWTIC
ARAFLAME,FLAME RESISTANT
NX22 / / / / ./
ANTl*STATIC
MODAFLAME"
MV28 ./ / / / / /MX28 / / / / /
MODAFLAME"FR77
FR10, FR11, FR12,FR14, FR15, FR16,FR18
FR19
/ /
tI ANTi-STATIC
BIZFLAME \FLAM! 9 ( 5 1 i T A N T U»
FR80 / / /FRAO, FR61, FR62,FRi3
/ / / / / / /
TBIZFLAME SFLAME 8 E S 1 I T A N I 1-3
FR50 / / / / /FR52, FR28.FR21,FRS3, FR58, FR59,FR55, FR56, FR57
/ / /
FLAMESAFE S777 EN 531 / /
AHTI-STATIC '
rBJZFLAME |FR70, FR73 EN533 /FR71 / / /FR7S, FR7& / /FR30 / /FR31 / / /SK20 EN 531
*NTI-STATIC "fBlZFLAME,S
FLAME 8 ( 1 A S 0 A N 1 L-J
S780.S781.S778, / EN 531 / EN533 /S782.S779.S773 / / /
HZVVELDFLAME RESISTANT
BIZ1, BIZ2.BZ30,BIZ3, BIZ4, BIZ5,
BIZ6, C030, BZ11,BZ12
/ / /
BIZ7 / / / / /
u2BHflaBZ4D / / / / /
WILD LAND FIRE
BIZFLAME1f LAME RE [AtD A MTU
FR98/ / / ./
FR41.FR43 / / / / FR4i
, FR47 / / / /
This fabric is made from 93% Meta-
aramid which is an inherently flameresistant fibre that does not melt,
drip or continue to burn, providing natural flame resistance. Thesefibres are blended with 5% Rara-aramid for strength and the fabricis inherently antistatic by also incorporating 2% carbon fibre. It has afluorocarbon finish providing oil and water repellency
DuPont™ and Nomex® are registered Trademarksof E.I. du Pont de Nenours and Company used underlicense to Portwest LTD.
Kevlar® is a registered trademark of E.I. du Pont deNemours and Company. Nomex® Comfort is madefrom 93% Nomex®
, 5% Kevlar® and 2% P-140
carbon fibre,
.Triplestitched'
KfFR Aramid
sewing thread
Concealed
2-way frontbrass zip
Double stitched
industrial wash,
flame retardant
reflective tape
ANTI-STATIC
ARAFLAME"
NX50 Coverall made from Nomex® ComfortNX22 ARAFLAME Coverall
© §1 © © FR«1W ©(§10© FR,IW
EN ISO 11612 A1+A2, B1, CI, Fl,EN ISO 11611 CLASS 1 A1 + A2
EN1149-5
EN 61482-1-2 CUSS 1
COST- R CERTIFIED
ARAFLAME 220gFFTiH Orange M-3XL
EN ISO 11612 A1+A2 B1, C1, F1,
EN1H9-5
EN 61482-1-2 CLASS 1
COST-R CERTIFIED
Nomex® Comfort 22DgWfP Dark Navy and Orange M-3XL
pockets
J
Concealed
side access
" Inherently Flame ResistantKKJ v» Ji TI
Modaflame™ is one of the inherent fabric developments available exclusively from Portwest.Mnn A ri A |\ y| r1" The fibres used in this fabric include 60% Modacrylic which is an inherently flame resistant fibre that does not combust, theFLAM ERE si ST A NT f*bers 3r& difficult to ignite and will self-extinguish, providing natural flame resistance. The fabric also has a fluorocarbon
finish providing oil and water repellency and helps to protect against stains.
FR Aramid
sewing_thread
1 Back hippocket withstud flap
~~
closure Concealed
side access
pockets
MODAFLAME
MX28 MODAFLAME Coverall
ipLe stitched
FR Aramid
sewingthread Double stitched
industrial wash,
flame retardant
reflective tape
-J
ANTI-STATIC
MODAFLAMEFLAME RESISTANT
MV28 Hi V s MODAFLAME Covera I
EN ISO 11612A1+A2. B1.C1.FI,
EN ISO 11611 CLASS 1A1 + A2
EN 1149-5
EN471 CLASS 3:2
EN 61482-1-2 CLASS 1 7.1 cal/cmGOST- R CERTIFIED
CX3 MODAFLAME 280gWB Hi Vis Yellow/navy S-3XL
©#©© FR,IW
1ST 12FR,IW
aximum Hazard Protection
EN ISO 11612 A1+A2, B1, C1, Ft,
EN ISO 11611 CLASS 1A1+A2
EN1149-5
EN 614-82-1-2 CLASS 1 7.1 cal/cmGOST- R CERTIFIED
MODAFLAME 280gWhH Orange S-3XL
ANTI-STATIC
MODAFLAME"FLAME RESISTANT
Constructed from an
inherently fire resistantyarn of 60% modacrytic,39% cotton and 1% carbonfibre.
The fabric has the ability towithstand heat and protectagainst the danger causedby static electricity whichwill not diminish with
repeated laundering.
Tested to meet and adhere to
the required EN Standards,the Modaflame™ Knit rangeis strong, durable and highlyinnovative.
AllANTI-STATIC
MODAFLAME"
FLAME RESISTANT
Garments confirm to
these standards
EN 1149 EN ISO 11612 GOST-R
« Inherently
MODAFLAMEf L A M t ft E S ' S 1 A H '
FR77 Flame-Resistant Anti-Static
Hi-Vis Long sleeve Polo shirt
ANTV STATIC
MODAFLAME,FLA WE RSSI 5TANT
ANT I-STATIC
MODAFLAMEftAME R S S S I A N T
Flame Resistant
CCCCCCC3 Modaflame Knit 210gmYellow, S-3XL
FR10 Flame-Resistant Anti-Static
Long Sleeve Polo Shirt
EN11612 A1, B1, C1EN1U9-5
G0ST- R CERTIFIED
Convenient for cooler weather, and ideal for
workers in the industry exposed to heat. Thestylish design of the garment has a 3-buttonplacket, finished with a ribbed collar and cuffs.
MODAFLAME™ KNIT 2D0gPT,T,lH Navy 5-3XL
© ©
FR12 Flame-Resistant Anti-Static
Long Sleeve Sweatshirt
EN11A12 A1, B1, C1,
EN1U9-5
GOST-R CERTIFIED
Ideal for workers exposed to heat in their workingenvironment. Features on this garment includeraglan sleeve,
round neck, ribbed collar arid cuffs,
making it comfortable and easy to wear.
£ 3 MODAFLAME™ KNIT 30DgFF!WD Navy S-3XL
EN471 CLASS 3:2,
EN 11i12A1.B1
.F1.
\ EN1U9-5
\ The lightweight, modacrylic fabrictogether with the reflective strips provide
/ the wearer with advanced visibilityJ and protection in hazardous situations.
Features include concealed front button
opening and contrast colour on the collarand cuffs,
ANTI-STATIC
BIZFLAMPFLAME li E S I S T A
A BizFlame™ Multi-norm garment is a high quality, fullycertified product that offers maximum protection.
The multi risk-protective clothing combines a wide usabilitywith optimal safety and protection for the wearer. Thefluorescent colour and flame-resistant reflective stripingprotect the wearer in situations of poor visibility.
* ...
,; V V
*
I.
FR61 HiVis Multi-Norm Jacket
EN ISO 11612 A1 + A2, B1, C1, E3 & F1EN ISO 11611 CLASS 1 A1 + A2
EN471 CLASS 3:2
EN 61482-1-2 CUSS 1 13.6cal/cm3EN13034 (TYPE 6]EN1U9-5
GOST- R CERTIFIED
Features include twin-stitched Hi-Vis strips on chest,arms and shoulders
, concealed 2-way front brass zipand two concealed front chest pockets with pipingdetail.
MVMW
www)
pmflBIZFLAME™ MULTI 345gYellow/Navy S-3XL
©(§)0® FR,IW
FR63 HiVis Multi-Norm Bib and Brace
FR62 HiVis Multi-Norm Trouser
EN ISO 11612 A1 +A2, B1,C1,E3&F1EN ISO 11611 CLASS 1A1 +A2
EN471 CLASS 2:2
EN 61482-1-2 CLASS 1 13.6 cal/cm;
EN13034 (TYPE 6)EN1U9-5
GOST-R CERTIFIED
These comfortable garments offer protection against multiplerisks. Features include twin-stitched hi-vis strips on the legs andwaist
, front brass zip and two front patch pockets,a back pocketwith flap and a lower tool pocket with flap,
BIZFLAME™ MULTI 345gYellow/Navy S-3XL
FR62 ©@©©© FR63: @ © FR,iwJ
EN 514S2-2
ns
Flame Resistant and High Visibility
FR60 HiVis Multi-Norm Coverall
EN ISO 11412A1 +A2, B1.C1.E3&F1EN ISO 11411 CLASS 1A1+A2
EN6U82-1-2 CLASS 1 13.6cal/cm'EN1303A TYPE i
EN471 CLASS 3:2
EN 1149-5
GOST- R CERTIFIED
This multi-norm coverall is constructed with a highlyinnovative high visibility,
flame-resistant, multi-norm fabric.
The garment also has patented knee pad pockets designedwith an innovative two tier adjustable system.
ECCCX3 BIZFLAME™ MULTI 345gam Yellow/Navy S-3XL
FR,IW©
fiOST-R
111 VI]
EN ISO 11612 A1+A2, B1, C1, E3 , F1
EN IS011611 CLASS 1A1 +A2,
EN 61482-1-2 CLASS 1 13.6cal/cm2EN 13034 TYPE 6,
EN 1149-5
GOST- R CERTIFIED
The high collar and studded flaps on each pocketprovide maximum protection.
BIZFLAME™ MULT! 345gIWlB Navy S-3XL
© % o @
EN ISO 11612
T\
Multi-Hazard Protection
BizFLame™ Plus has been developed and designed using a highly innovative flameretardant fabric with added anti-static properties. Constructed from 99% cotton andinterwoven with 1% carbon yarns.
EN ISO 11612
EN 61 *62-2
WHITE
JZFLAME"
ilZFLAME FR50 Anti-Static Coverall 350gm
FR52 Padded Winter Anti-Static Coverall 350gm
EN ISO 11412 A1+A2, B1, CI, F1.EN ISO 11411 CLASS 2 A1+A2,
EN1149-5
GOST- R CERTIFIED
This coverall has a full quilt lining for added warmth.
BIZFLAME™ PLUS - 99% Cotton, 1% Carbon fibres 350g.100% Polyester flame retardant wadding 10Og100% Cotton flame retardant Lining 170g
WT'IH Navy and Orange S-3XL
®©@ FR,IW
EN ISO 11612 A1+A2, B1, C1, F1, E2,
EN ISO 11611 CLASS 2 A1+A2,
EN 61482-1-2,
EN1149-5
GOST- R CERTIFIED
Constructed with a highly innovative flame-retardant fabric withhigh visibility reflective tape double stitched for enhanced visibility,The garment also has patented knee pad pockets designed with aninnovative two tier adjustable system.
SXCCCC3 BIZFLAM E™ PLUS 350gS!HII Orange, Navy, Red, Royal, White Reg
Orange and Navy Tall
©Q FR,IW
ANTI STATIC
B ZFLAME
Triple stitchedseams
Tab velcro
adjustable cuff
UNLINED350G
Tab velcro
adjustable cuff
-« Designed For Colder Climates
Tab vetcrtf
adjustable cuff
*NTI-$T*TIC
rBIZFLAMEl
FR28 Light Weight Anti-Static Coverall 280gm FR21 Super Light Weight Anti-Static Coverall 210gm
EN ISO 11612 A1+A2, B1,C1,EN ISO 11611 CLASS 2 A1+A2,
EN1U9-5
GOST-R CERTIFIED
EN ISO 11612 A1+A2, B1, CI, Fl,EN ISO 11611 CLASS 1A1+A2,
EN 1149-5
GOST- R CERTIFIED
Constructed with lighter weight highly innovative flame-resistantBizFlame™ Plus fabric.
CXX3 BIZFLAME™ PLUS - 99% Cotton, 1% Carbon fibres
280gl"'l "I"IH Navy and Orange XS-4XL
Constructed with a super lightweight highly innovative flame-resistantBizFlame™ Plus fabric.
CCCCCCC3 SIZFLAME™ PLUS - 99% Cotton, 1% Carbon fibres 210gNavy and Orange XS-3XL
<
\\ Lightweight For Warmer Climates 2' Hi \ l
ii gj
I
PLUSI
BizFlame™ Plus - Winter
options. These winter productshave been developed anddesigned using the highlyinnovative flame retardant
outer BizFlame™ Plus fabric
combined with an insulation
layer and Flame Resistantcotton layer for added warmthand protection,
The outer fabric is constructed
from 99% cotton and interwoven
with 1% carbon yarns. Thesegarments are guaranteed togive you comfort and protectionin cold weather conditions.
DESIGNED FOR THE
INDUSTRYWINTER GARMENTS
AHTt-STATIC
rBlZFLAME,f
FR59 FR Anti-Static Winter Jacket
EN ISO 11612 A1+A2. B1.C1.Fl,EN ISO 11611 CLASS 2 A1+A2
EN1U9-5
GOST-R CERTIFIED
The extra thick wadding insulation and FR cotton lining on this jacketgives extra warmth. This style also has high visibility reflective tape doublestitched for enhanced visibility. Meeting all the required EN standardsincluding the welding standard. Features include triple stitched seams,high visibility strips on shoulders, arms and body, concealed 2-way frontbrass zip and two front slant chest pockets with flaps.
CCX3 BIZFLAME™ PLUS 350g100% FR cotton 170gFR wadding 300g
rrriD Orange S-3XL ©@ ® FR
seams
BIZFLAME, BIZFLAME,
Adjustablewaist
AdjustableSleeve opening
Concealed Zipopening
Triple stitched
FR58 FR Anti-Static Winter Salopettes
EN ISO 11612 A1+A2. B1, C1, Fl.
EN ISO 11611 CLASS2A1+A2
EN1U9-5
GOST- R CERTIFIED
Using wadding insuLation and FR cotton lining for extrawarmth, this style also has high visibility reflective tapedouble stitched for enhanced visibility. Meeting all therequired EN standards including the welding standard.
CXCCC3 BIZFLAME™ PLUS 350g100% FR cotton 170gFR wadding 20Cg
BSD Orange 5-3 XL
® !ENiSO 11612
Fl
©@ FR
FR53 FR Anti-Static Winter Coverall
EN ISO 11612 A1+A2. B1.C1.Ft,
EN ISO 11611 CLASS 2 A1+A2
EN1M9-5
GOST-R CERTIFIED
Using a layer of wadding insulation and FR cotton lining forextra warmth, this meets all the required EN standards.Features include triple stitched seams, high visibility stripson shoulders
, arms and legs, concealed 2-way front brasszip and two front slant chest pockets with concealed studclosure.
CCX3 BIZFLAME™ PLUS 350g100% FR cotton 170gFR wadding ZOOg
.ID Orange S-3XL ©0 ® FR
Detachable
Superb Weather Protection »
FBIZFI AMEt
FR56 Bizflame Plus Trouser
EN ISO 11612 A1+A2. B1, C1, F1
EN ISO 11611 A1+A2, CLASS 2,EN1U9-5
GOST- R CERTIFIED
Trouser features include triple stitched seams, highvisibility strips an legs, knee pad pockets, ruLer pocket,front fly brass zip arid adjustable bottom leg opening.
C CC3 BIZFLAME™ PLUS 350gFWlH Navy S-3XL
range S-3XL
FR57 Bizflame Plus Bib and Brace
EN ISO 11612 A1+A2, B1.C1.F1
EN ISO 11611 A1+A2, CLASS 2,EN1149-5
GOST-R CERTIFIED
Bib and Brace features include triple stitched seams, highvisibility strips on the legs and body, two front patch pockets,
one rule pocket, onefrant chest pocket, one back pocketwithflap and stud closure and adjustable bottom leg opening,
MNM BIZFLAME™ PLUS 3S0gPI.. Navy S-3XL
OrangeS-3XL
© § © © © fr,iw
4 m
FR,IW
Great New Flame Resistant Designs
Introducing , the new and exciting addition to our range. IncLuding5 new styles, the revolutionary and styLish range of AntifLame, Antistatic and HighVisibility garments are designed and engineered specifically to ensure the workingenvironment is a safer pLace.
FLAME RESISTANT-
mm
FR30 FR Anti Static, Lined Fleece
EN 14116 INDEX3 EN 1149
This quality fleece provides comfort and warmth when Neat &flame and anti static protection are needed. It is constructedwith a double sided anti-pill polyester fleece. Features includetwo side pockets with concealed zip closure to keep belongingssecure. Comfortable elasticated cuffs and drawstring at hem.
ECCCCCC3 94 % FR Polyester 4% Carbon fibre, 28DgFR Cotton lining 170g
Irrifl Navy, S-3XL© @
FR31 FR Anti Static, HiVis Lined Fleece
EN471 CLASS 3:2, EN 14116 INDEX 3, EN 1149
This fully certified, two-tone, lined fleece jacket isconstructed with a double sided
, anti-pill, polyester fabric.The jacket features silver reflective strips certified to EN471and 2 zipped hand warmer pockets in the side seams
94 % FR Polyester 4% Carbon fibre, 28DgFR Cotton lining 170g
Ml" ,"ID Yellow, S-3XL
EN471 CLASS 2:2,
EN 14116 INDEX 1/5H/40, EN1149
10D% FR Polyester Tricot 120gmW13 Yellow
, Orange, S/M, L/XL,2XL/3XL -
© @
EN471 CLASS 3:2
EN ISO 14116 INDEX 1/5H/40
£ 3 100% Polyester 160gIB Yellow
, S/M, L/XL, 2XL/3XL
FR75 HiVis Vest with Flame
Resistant Finish
EN471 CLASS 2:2,
EN ISO 14116 INDEX 1/5H/40
£XCCX3 100% Polyester 160gWjfl Yellow
, Orange S/M, L/XL, XXL/3XL
©
NEW Bizflame™ Work RangeM
1
FR43 Sealtex Flame Hi Vis Trouser
FR47 Sealtex Flame Trouser
FR41 Sealtex Flame Hi Vis Jacket
FR46 Sealtex Flame Jacket
Constructed from an anti-flame, PU coated, polyester fabric, the lightweight and durable SealtexFlame suit is designed to offer full protection against adverse weather conditions. Certified to ENISO 14116, EN 1149, EN13034 & EN343 with an EN471 option. The lightweight and flexibte fabricwith welded seams ensures reliability under the most extreme conditions,
FR43: EN471 1:2, EN ISO 141U INDEX 1, EN343 CLASS3:1, EN1149-5, EN13034FR47: EN ISO 14114 INDEX 1 EN343 CLASS 3:1 EN 1149-5, EM13034
These trousers offer excellent protection against harsh elements. They are waterproofand windproof, yet remain lightweight. Features include adjustable hems designed tofit over footwear.
SCXXC3 Sealtex Flame 195gWf»lB FR43: Yellow S-3XL|"'|"I,;,IH FR47: Navy S-3XL
NEW Sealtex™ Flame Waterproof Range
ftI
nIN ISO 14
wlie EN 13034
| [ *]1 EN 343 EN 1149 |
EH 471FRfl 1 ONLY
$Egj& FR46
FR41:EN471 3:2, EN ISO 14114 INDEX 1, EN343 CLASS 3:1,EM1149-5, EN13034
FR4A: EN ISO 14114 INDEX 1 EN343 CLASS 3:1 EN1149-5 EN13034
This lightweight waterproof and windproof jacket offer excellentprotection, in harsh or foul weather conditions. Features include astudded storm flap, front flapped pockets and adjustable cuffs.
£CCCCCC5 Sealtex Flame 195gIWlB FR41: Yellow S-3XLirriH FR46: Navy S-3XL
Heat Applied EN471 reflectivetape for added visibility
Portwest Multi-Protection Range is a range of quality, fully Certifiedgarments that offer maximum protection to wearer against heat, flame,anti-static, adverse weather and poor visibility conditions.
S778 Bizflame Rain Hi-Vis Breathable
Antistatic FR Jacket
BIZhLAMb
S773 Bizflame Rain Hi-Vis Antistatic FR
Bomber Jacket
EN471 CLASS 3:2,
EN ISO 14116.
EN343 CLASS 3:1
Portwest's new bomber jacket version of the ever popularS778 Multi norm rain jacket. Now certified to EN 14116
KXCX33 98% Polyester, 2% Carbon Fibre with a PU
Coating, 250g
FR Cotton Lining, 170g with a 100% polyesterFR wadding, 10Og
"ID Yellow S-3XL
ANTI-STATIC
BIZFLAMEFLAME RESISTANT
©@©0® ® FR©©©@®®f| FR
WftTERPROOF ftNOFLAME RESISTANT
Detachable hood
EN531 A, B2, C2, EN533EN 1149-3
, EN471 CUSS 3:2
GO/RT 3279 (ORANGE ONLY]EN343 CLASS 3:2
Optimum protection is offered from this antistatic jacket.Flame resistance coupLed with superb breathable andwater resistant properties, means this garment meets thenecessary stringent European standards.
98% Polyester, 2% Carbon Fibre with a PU
, Coating, 250g
FR Cotton Lining, 170g with a IDO*A polyesterFR wadding, 1D0g
I"T"I,"IQ Yellow, Orange S-3XL
36 Waterproof, Fire Resistant and High Visibility
S780 Bizflame Rain Unlined - Hi-Vis
Antistatic FR Trouser
EN533 INDEX 1, EN 1149-5EN471 CLASS 1:2
EN343 CLASS 3:3
Those unlined trousers come with fully elasticated
waistba nd a rid back waist bug gy to maximise comfort. Thebraces are fitted with a quick release buckle system,
98% Polyester, 2% Carbon Fibre with a PUCoating 250gYellow, Orange S-XXL
Zippedankles with a
VeLcro flap
S781 Bizflame Rain Lined - Hi-Vis
Antistatic FR Trouser
EN533 INDEX 3
EN 1149-5
EN343 CLASS3:3
EN471 CLASS 11
Offers all the characteristics of the S780 with a
flame resistant Liner for extra warmth,
SXXCXC3 98% Polyester, 2% Carbon Fibre with aPU Coating 250g
FR Cotton Lining, 170g/m!"T"l"IO Yellow, Orange 5-XXL
m fr FR
I \\\ \I
Multi-Hazard Protection
MULTI EN STANDARDS$
Concealed mobile
phone pocketunder storm
ANTI-STATIC
IIZFLAMEl.
S779 Bizflame Rain Hi-Vis Multi-Protection
Jacket
EN471 CLASS 3:2. EN343 CLASS 3:2, EN ISO 14116,
EN1U9-5, GO/RT 3279 (ORANGE ONLY)
Multi-protection jacket comes with detachable FR fleece liner,which means that it is suitable for use in all weather conditions,
Jacket to tie worn with trousers for fuLl protection,
£ CCCC3 98% Polyester, 2% Anti-Static Carbon fibre with a
Fluoro Carbon Finish, with 100% PU Coating 250g.
iiiii Flame retard ant Cotton Lining, 170g. Removable100% Polyester Flame retardant fleece gilet.Conforms to EN ISO 14114 Index 1
i'i1 '"ID Yellow/Navy S-XXL, Orange/Navy M-XXL
EM 15014116
S782 Bizflame Rain Hi Vis Multi-
Protection Trousers
EN471 CLASS 2:2, EN343 CUSS 3:2, EN ISO 14116,EN1149-5
Features of this lined trouser includes fully elasticatedwaistband and back waist buggy,
with braces that are
fitted with a quick release buckle system. Trousers to beworn with jacket for full protection.
9B% Polyester, 2% Anti-Static Carbon fibrewith a Fluoro Carbon Finish, with 100% PU
Coating 250g.
Flame retardant Cotton Lining, 170g.
EN ISO 14116
Yellow/Navy, Orange/Navy M-XXL
© (§> ® © © @ FR FR
H3: Contrast ColoursII ft, Ji \ Tu I t
BizFlame™ Plus - lightweight. This fabric hasall the benefits of the highly innovative flameresistant BizFlame™ fabric , The garmentdesign is developed specially to protect againstthe hazards of wildland fires.
WILDLAND FIRE
BIZFLAME!FLAME RESISTANT
WILDLAND FIRE
bjzflameJFR98 Wildland Fire Coverall
EN ISO 11612 A1+A2. B1, CIEN 15614 A1+A2
EN 1149-5
GOST- R CERTIFIED
Constructed with a light weight highly innovativeflame-retardarit fabric with special features to
protect the wearer from the hazards associatedwith wildland fires,
entrapment.
EN156KThis European Standard specifies methods of test andminimum performance requirements for protectiveclothing, designed to protect the wearer
,
s body, exceptthe head, hands and feet, to be worn in wildlandfirefighting and associated activities. This clothingis not intended to provide protection during fire
This European Standard covers the general design of the clothing, theminimum level of performance for the materials employed and themethods of test to determine these levels.
This European Standard is not applicable to clothing for use in situationsencountered in structural firefighting (EN 469 and ISO 116131 or wherea high level of infrared radiation is expected (EN 14861, nor does thisEuropean Standard cover clothing to protect against chemical, biological,electrical or radiation hazards.
S777 Flame Safe Jacket
EN 343
EN531 A, B2,C1, nsnEN 343 CLASS 3:1 I4JGOST- R CERTIFIED \y
EM 531
This heat resistant and flame retardant waterproof jacket provides (jp(Jexcellent protection. The flame retardant cotton liner and anti-wicking strip are key features. GOST-R
CCX3 Flame retardant 100% Nylon PU coated, (140gl EN 531
. Certified
Flame retardant Cotton Lining, 170g/m(YYYYY|1 Flame retardant 100% Polyester Wadding, IDQg/mH"l"m Orange M-3XL
Q © O S
© ® @ < > FR,IW
FR rib knit cuffs
FR Aramid
sewinq thread
Double
layer kneeprotection
FR Hi Viz
yellow andSilver tape
SCCCC03 BIZFLAME™ PLUS-99% Cotton, 1%
Carbon fibres 2B0gfWl Navy S-XXL
Stud adjustablecuff
EN ISO 11612 A1+A2, B1.C1.E1.FIEN ISO 11611 CLASS 1.A1+A2
COST -R CERTIFIED
Our best selling Bizweld™ coverall is ideal for offering complete protectionto workers exposed to heat. The generous fit allows the wearer to workunhindered. The ample storage space, rule pocket and conceaLed mobilephone pocket hold equipment securely.
SXCCCJ3 Bizweld™ 330g.IB Navy, Orange, Black
Royal, Bottle Green, RedGrey
gost-e
© ®> @ ©
XS-5XL S-5XL
S-3XL L-3XL
s-m M-iXL
S-3XL M-3XL
S-3XL L-XXL
S-3XL L-3XL
Best Welding Protection
IZWELD MAXIMUM
We understand that safetyis crucial for professionalsworking in a fire hazardousenvironment.
The garments in theBizweld™ Flame Resistant
range have been speciallydesigned to guaranteecomfort, performance andsafety whilst providingeffective function at all times.
This range has beenrigorously tested to meetand adhere to current EN
standards.
BIZWELD
B1Z5 Bizweld™ lona Coverall
EN ISO 11612 A1+A2. B1, C1, El,
EN ISO 11611 CLASS 1, A1+A2GOST-R CERTIFIED
Fl
The Bizweld lona Coverall offers visible protection to thewearer. Clever design features include flame resistantreflective tape on the shoulders, sleeves and legs, kneepadpockets, ample storage space and a rule pocket,
SXCX3 Bizweld™ 330gEBB Navy, Orange, Black,
Royal, Red
® # ® © 9 FR
COLOUR REG TALL
NAVY
ORANGE
BLACK
ROYAL
RED
EN ISO 11612 A1+A2, B1,C1,E1,F1EN ISO 11611 CLASS 1A1+A2
GOST- R CERTIFIED
The Bizweld Hooded Coverall offers a built-in head
protection option to the wearer plus added designfeatures including knee pad pockets and a back hippocket with flap.
Bizweld™ 330gilBIUi Navy Reg 5-3XL
\
© © © © &
BizWeLd™ Flame Resistant 41
BIZ3 Bizweld™ Trousers
EN ISO 11612 A1+A2, B1,C1,E1,FI,EN ISO 11611 CUSS 1.A1+A2
GOST-R CERTIFIED
EN ISO 11512
PC*
Bizweld™ use twin stitched seams that
offer extra strength arid feature sidepockets with a conveniently placed rulepocket for quick and easy accessibility,
CXXC3 Bizweld™ 330gfWIB Navy, Royal, Black,
Orange, Battle Green
© in ®COLOUR REG TALL
NAVY eROYAL EBLACK EORANGE EBOTTLE GREEN E
EN ISO 11612 A1+A2, B1, CI, E1
EN ISO 11611 CLASS 1.A1+A2
GOST- R CERTIFIED
The Bizweld™ Jacket. Features include secure stud
fasteners and two chest pockets with flaps. This flameresistant jacket also includes a concealed mobile phonepocket and can be matched perfectly with the Bizweld™Trousers or Bib and Brace.
Bizweld™ 330gI,TT1lO Navy S-4XL, Royal, Black S-XXL
Red S-XXL, Orange M-XXLBottle Green S-XXL
SzWELD
BZ30 Bizweld™ Trousers
EN ISD1U12A1+A2, B1.C1.E1.fiEN ISO 11611 CLASS 1
.A1+A2
GOST-R CERTIFIED
¥1EM ISO 11612
(PC?
This garment has a FLexi-Fitwaistband; twin stitched seams
for extra strength and sidepockets with a conveniently placedrule pocket for quick and easyaccessibility.
CXCCC3 Bizweld™ 330g"TB Red Reg S-XXL
© % ( }
It has been designed and developed toprovide flame, welding, Hi Vis and anti-static protection. Constructed from99% Cotton and 1% carbon fibre. The
carbon yarns are evenly spread alongthe warp to achieve the EN standard
EN ISO 11612 A1+A2.B1, C1.E1.FIEN ISO 11611 CLASS 1, A1+A2COST- R CERTIFIED
This bib and brace has been constructed with a large chestpocket in the front for carrying tools or personal belongingsand two side pockets, a back hip pocket with flap and a rulepocket. The adjustable elasticated straps offer maximumcomfort and a perfect fit.
Bizweld™ 330gNavy S-4XL, Royal S-3XL84cm inside leg
EN ISO 11611
TF
GOSTR
BIZ7 Hi Vis Anti-Static Bizweld™ Coverall
EN ISO 11612A1 +A2, B1, CI, E3 & F1
EN ISO 11611 CLASS 1 A1 + A2
EN1U9-5
ENA71 CLASS 3:2
GOST- R CERTIFIED
This Hi Vis coverall is ideal for poor visibility. Features
include two chest pockets, two side pockets, hip pocket,rule pocket and kneepad pockets.
Bizweld™ 330gT"Trn Yellow/Navy Reg S-3XL
FR
Multi-Hazard Protection 43111 ' 11
Internal chest pocket
;=.> 3 PREMIUM MOLESKINIIZWELD O Welding Clothing
For more weldingaccessories pleasesee the main brochure
The heavy weight sateen weaveMoleskin fabric used in this
coverall is 99% Cotton and
1% Carbon Fibre with added
protection against hazards ironsplash, static electricity andelectric arc.
Designed to meet the demandsof heavier welding and similarenvironments.
&50GKneepad pockets
EN ISO 11612 A1+A2, B2. C1.E3, Fl
EN 1149-5
EN 61482-1-2 CLASS 1
EN ISO 11611 CLASS 2, A1+A2GOST- R CERTIFIED
The Bizweld™ Mole Coverall offers a coverall with heavy duty front studclosure. One internal chest pocket, two front swing pockets, two largeback pockets with flaps, the option to insert knee pads when needed,ample storage space and a rule pocket
SXCCC33 Bizweld™ 450g (QlH1EID Navy Reg S-3XL 60ST-R
C030 CE Safe-Welder™ - Coverall
SAFEWELDER
EN 13034, EN ISO 13982-1, EN 14116, EN1149-5
The SMS FR Coverall was developed using innovative non-wovenfabric technology. The main characteristic of this coverall is theresistant to noxious dust and splash as well as being anti-static andfire retardant.
EN ISO 11612 A1+A2, B1, C1.E1.FI
EN ISO 11611 CLASS 1.A1+A2
GOST- R CERTIFIED
The Safe-Welder™ Coverall is a great choice for welders arid industrialworkers who are exposed to heat. Features include side elastic waistand multiple pockets,
C03 SAFE-WELDER™ 330g"T"I"'IH Navy, Royal, Red, Orange, Bottle Green
BizTex® SMS FR
fEl White M-XXL
BZ11 Bizweld™ Sleeves
BZ12 Bizweld™ Cape Hood
EN ISO 11612 A1+A2, B1,C1,E1,F1
EN ISO 11611 CLASS 1 A1 + A2
GOST-R CERTIFIED
Bizweld™ 330gNavy - One Size
BZ12
45
EN531.
AAAAjWVJ(ftAAAAA/J
.pirg
EN 1149 i pi
4B% Bizflame™, 32%
Cotton, 20% PolyesterBlack, Euro:39-48UK:6 -12 © ® B
GORE-TEX FR235fabric is the latest developmentfrom GORE and provides completemulti-hazard protection. There aretwo variations of the fabric which
Portwest offer; FR235 3Layer andFR235 2Layer.
3 Layer fabricIs used on the
Salopettes andthe hood.
2 Layer FabricIs used on the
jacket andcoverall.
The outer layer isextremely tough and durable, witha high tensiLe strength and tearresistance, making these garmentstong lasting.
The fabric is backed with a
waterproof membrane, whichis a composite of expandedpolytetraftu methylene (ePTFEl.This membrane makes water and
wind penetration impossible, whilstallowing perspiration to escape.
The inner tayer of the 3layer fabricis made from an aramid fabric,
ensuring the garments providethe best heat & flame protectionpossible.Lining used on the Jacket andcoverall have been lined using 150g/m2 Kermel Viscose fabric for bothcomfort and additional protection,
All these
GORE TEXGarments conform
to these standards
46
© ® © ® @ @EN 343 EN 471
Certified toELECTRIC ARC
CLASS?
PRODUCTS
Zipped Internal
AdjustableVetera Cuffs
EN471:2003 CLASS3:2,
EN1149-3 2004,
EN ISO 11412:2008 A1B1C1,
EN343:2003 CLASS 3.3,
IEC EN 61482-2:2009 CLASS 2
Excellent fitting coverall manufactured in GORE-TEXFR235 fabric and it has FR lining for extra warmth andcomfort and includes a detachable hood. Adjustable vetcrocuffs
, knitted FR storm cuffs, two large side leg pocketswith storm flaps, and an inner soft collar provide maximumprotection from wind and rain. Also allows easy access withlower leg opening with zip closure and velcro storm flap.
GORE-TEX FR235 2L 275g:Outer: 52% Modacrylic 42%Cotton 6% 11 Layer)Polyester: Bicomponent Membrane:ePTFE (1 Layer)Kermel Viscose 150gHi Visibility Yellow S-XXL
GT65 GORE-TEX FR235 Coverall Lined
Phone Pocket
elcro Storm flap
EN471:2003 CLASS 3:2,
EN1149-3:2004,
EN ISO 11612:2008 A1B1C1,
EN343:2003 CLASS 3,3,
IEC EN61482-2:2009 CLASS 2
© @ @
The jacket is lined for extra warmth and safety. The outer fabric isGORE-TEX FR235 fabric, Lined with a soft FR Lining and features a LargedetachabLe hoodwhich can be stored inside the jacket. With knitted FR innerstorm cuffs, two large outer side pockets with storm flaps, pLus an innersoft FR collar
, give maximum protection from wind and rain.
ZZZ3 GORE-TEX FR235 2L 275g:Outer: 52% ModacryLic 42% Cotton 6% Polyester: II Layer]Bicomponent Membrane: ePTFE. 11 Layer)
hb 100% Aram id Kernel Viscose 15Dgiwill Hi Visibility Yellow S-XXL
EN471:2003 CLASS 1:2,
EN 1149-3 2004,
EN ISO 11612:2008 A1B1C1,
EN343:2003 CLASS 3.3,
[EC EN 61482-2:2009 CLASS 2
© ©
@The salopette is manufactured from tough and durable 3 LayerGORE-TEX FR235 fabric and features high waist design,
FR elastic
braces with quick release buckles, easy access lower Leg opening withzip closure and velcro storm fLap.
CXCC3 GORE-TEX FR235 3L 345g:Outer: 52% Modacrylic 42% Cotton 6% Polyester: 11 LayerlBicomponent Membrane: ePTFEM Layer]Inner Layer: 100% Aramid 11 Layerl
TWO Hi Visibility Yellow 5-XXL
GT69 GORE-TEX FR235 Hood Lined
GORE-TEX FR235 2L275g:Outer: 52% Modacrylic 42% Cotton 6% [1 LayerlPolyester: Bicomponent Membrane: ePTFE. II Layerl100% Aramid Kermel Viscose 150gHi Visibility Yellow S-XXL
47
FD01 TractionLite Non Metallic 10 inch (25cm] Safety Boot S3 HROFD02 TractionLite Non Metallic 7 inch 118cm] Safety Boot S3 HRO
e. oy comoining
na wear, oil res
IBQUKftOMmm-mhJWll
f
Oil hydrocarbonsresistant
Ultra grip panel withmulti directional water
dispersion channels
Durable rubber outsole - Oil
and Hydrocarbon resistant,HRO heat resistant to 300C and
incorporating a non slip threaddesign with a large ground surfacecontact area that dissipatesliquids.
EN20345:2004 + A1:2007, IEC 61340-4-3, GOST- R CERTIFIED
Lightweight 100% non metallic construction with YKK zip, S3 E-Leather® and a waterproof andbreathable membrane to keep feet dry in the harshest at conditions. Specially designed PU/Rubberoustole with Green Diamond™ technology offers superior slip resistance in the most demanding ofconditions.
,WTH E-Leather®
PU/Rubber-Outsole F18GD
Black, Euro: 33-48 UK: 5-13
ii3H) je M
iHI 8 l|30Dr"
C
|- 1
B909 Travel Trolley Bag600D Polyester
IBB Black L74 x W37 x H34
(100 Litre capacity)
Tungsten-Carbide Spike
Steel Spike
FC91 Non Slip Ice Grabber FC93 Non Slip Ice Grabber FC94 Non Slip Ice Grabber t_Virtually non sparking spike Rubber
.
™
iWiH Black,
L(UK:8-11 Euro:3?-431, ° Black, L|UK:8-11 Euro:39-43), (iSjl TWiP Black, LIUK:8-11 Euro:39-43),XL
48 XL(UK:1UEuro:44+] XL (UK:11+ Euro:44+) jUK:11+Euro:44+]
YOUR DESIGN....Portwest prides itself on the unique range of sen/ices we offer to our customers, We have the ability to servecustomers of any size, anywhere, to their exact specifications, to any European or Internationally recognisedstandard of safety.
BESPOKE PRODUCT SERVICEWe design and develop bespoke product solutions to unique client requirements that wantsomething different. A complete team of experienced, commercially aware designers & projectmanagers are on hand to offer advice and technical know-how to YOU, to produce customisedgarments and products to meet your specific needs and changing needs, yFor example: Non standard design, colour, branding or size. Solutions can be quickly realised and /production swiftly arranged while maintaining competitive pricing. /
CONCEPT, RESEARCH & DEVELOPMENTWe listen carefully to our customers, understand the End User requirements & levels ofprotection needed so the product will be
"
fit for purpose"
The depth of our knowledge and the breadth of our resources includes sourcing rawmaterials, drafting specification charts and supplying samples before production starts.
CERTIFICATION OF BESPOKE PRODUCTSAs part of our unrelenting drive towards best practice and industry leading customer service,all customised products are tested and certified to the relevant EN or ISO standards.
MODIFICATIONS TO STANDARD PRODUCTSChoose from our existing range of 500 + products or make amendments to them by addingReflective tape to sleeves or legs. Add a pocket, etc.
OWN BRANDINGCustomers can select any Portwest product and have their own Labelling and packaging appliedduring production,
PORTWEST STORAGE FACILITIESWhy not Let us store your goods? We can provide storage for your items.
V
1.J A
I
See the PORTWEST brochure for many more stylesof garments, footwear and accessories.
Uniform Sp. z o. o.ul. Redutowa 25, 01-106 Warszawa
tel. (22) 836 94 54, faks (22) 213 89 50
FOUNDRIES MANUFACTURING OIL & GAS POWER GENERATION PORTS
& SHIPPING ELECTRICAL MINING UTILITIES ONSHORE/OFFSHOREWELDING & ALLIED PROCESSES STEEL MAKING FIRE FIGHTING OIL
HANDLING/TANK CLEANING PETROCHEMICAL AIRCRAFT RESCUEWELDING CHEMICAL HANDLING
"i
PORTWESTPortwest Clothing Ltd. Tel: +44 (0) 1709 894 575Fields End Business Park, Fax: +44 (0) 1709 880 830Thurnscoe, Rotherham Email: infoOportwest.comS63 OJF, England Web: www.portwest.com
Portwest GmbH
Kennedy HausHans-Bockler-Strasse 1
40476 Dusseldorf
Deutschland
Tel: +49 211 436 936 0
Fax: +49 211 436 936 20
Email: kontaktraportwest.de
Portwest Poland Tel: + 48 32 355 0053
Alliance Silesia Logistics Fax: +48 32 730 3205Center Czeladz Email; biuroOportwest.plul. Wiejska 4941-250 Czeladz
Polska
r
