6

NEW - Henry Scheinhenryschein.co.nz/documents/PDFs/SPL April 2016.pdf · arance when manufacturing complete dentures in accordance with the concept of Biological Prosthetics. VITA

Embed Size (px)

Citation preview

ScheiningPricesLabAPRIL 2016

1Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

Complete Kit GC1-008408 $895.00

NEWOPTIGLAZE™ colorA light-cured characterisation coating for indirect composite and acrylic restorations. OPTIGLAZE™ color is a revolutionary nano-filled, characterisation material developed specifically to add colour, surface gloss and high wear resistance to indirect composite and acrylic restorations including chairside-milled hybrid ceramic restorations, acrylic dentures, artificial teeth and PMMA type materials. You can now change shades, create effects, shift value, characterise and glaze all your resin type prosthetics in no time at all.Best of all, OPTIGLAZE™ color gives you beautiful aesthetic restorations that will last longer due to the superior wear resistance achieved from GC’s innovative single dispersion nano-filler technology.

OPTIGLAZE- color offers unique features:• Ready to use, easy to handle and cuts out the polishing stage, saving you valuable time• You can choose from a wide variety of colours to add natural gloss and brilliance, both

for internal and external characterisation, leading to perfect aesthetics• On application OPTIGLAZE™ color’s single dispersion nano-filler technology ensures a

toughened 25-50 μm characterisation layer is formed to give your restorations beautiful, colour stable aesthetics and a long-lasting gloss with exceptional wear resistance

With conventional filler technology the clustering of the particles readily occurs and the material can still be susceptible to wear .

With single dispersion nano-filler technology, the particles are evenly dispersed, offering higher wear resistance and a longer lasting gloss!

WHITE NITRILE GLOVES• Powder Free• Ambidextrous finger texture • Beaded cuff• Sizes: XS-XL• Available in carton of 2000 gloves (10 boxes) and 1 x box of 200

HS-900865_ 1 box of 200 only $14.90 1 carton (10 boxes) only $130.00

box 200

NEW

OCTOBER 2015 SPECIALS

ScheiningPricesLab

2 Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

What Makes aComplete Denture

Beautiful?Date of issue: 05.09Special Reprint

2

Complete upper and lower denture with individual gingiva

shade characterisation of the anteriors may not alwaysbe required in every case, a natural effect, however, isalways desired. With idealized anteriors set up harmon-iously in relation to the tooth axes and parallel to theincisal edges of the upper and lower jaw teeth, it is pos-sible to achieve an exceedingly lifelike and harmoniouseffect. There is no 'one solution fits all' when it comes tothe second detail, the artificial gingiva – i.e. the "pinkaesthetics" – although prefabricated materials andinstructions have been around on the dental market forquite some time.

With a little love of detail it is quite straightforwardto make a complete denture which is virtually in-

visible as such. As soon as the mouth is opened, the firstdetail becomes evident – the anterior teeth. For this rea-son great care should be taken with regard to the indi-vidual anterior design. If the anteriors have an artificialor unnatural appearance, it will hardly be possible toobtain an "invisible" prosthesis.Denture teeth can be individualized in such a way thateven an expert will not be able to distinguish these withabsolute certainty from their natural counterparts. While

"Even a complete denture hasthe right to be beautiful!“Viktor Fürgut (dental technician), Germany

Key words: Individuality, idealized anteriors, pink aesthetics, processing in wax,colouration of the denture base acrylic.In his article published in the March edition of the international ZAHNTECHNIK MAGAZIN, theauthor had described the working methods he uses for the individual setup of anterior andposterior teeth according to nature's principles. Complete denture specialist Viktor Fürgutshows in the following article how the "pink aesthetics" can be designed with a natural appe-arance when manufacturing complete dentures in accordance with the concept of BiologicalProsthetics.

VITA PHYSIODENS®

APRIL 2016OCTOBER 2015 SPECIALS

ScheiningPricesLab

3Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

Modelling Wax • Medium hardness• Very malleable• High bee wax content• Solidification point: medium (55°C), summer (56°C), winter (54°C) • Available in 500g or 2.5kg packs

Summer

• 1.5mm, 2.5kg

HS-9001516 ONLY $61.60 • 1.5mm, 500g HS-9001517 ONLY $14.70

Winter• 1.5mm, 500gHS-9001519 ONLY $14.70

• 50 Micron 5kgHS-9003792• 110 Micron 5kgHS-9003794 • 250 Micron 5kgHS-9003798 $43.90

• For sandblasting restorations made from any type of alloy

• High-grade corundum does not cause silicosis and complies with health and safety regulations

Alublast Aluminum Oxide

Glass Beads• 50 micron• 5kgHS-9003800 ONLY $36.60

Articulating Paper• Super sensitive for marking at any point

of articulation and perfect for marking in a wet field

• Smooth, soft, non stick, cushioned surface

• Marks any area, with all materials • 140 sheets • BlueHS100-8575 X-Thin 14 books per boxHS100-2876 Thin 12 books per box ONLY $10.50

Alginate• Available in Regular and Fast Setting• Spearmint flavour • 450gHS100-5_ ONLY $20.90

Disposable Impression Trays• Pkt 12HS900-45_ Was $24.20

Diamond Polish Paste• 2gm SyringeHS101-4116 Was $64.40 NOW $48.30

Criterion Latex Glove • Powder free• Sizes: XS-XL• Box 100HS-102-____ Was $8.90

BUY ANY 9, GET 1GET

BUY

Latex Lightly Powdered Glove• Lightly powdered with beaded cuff • Thiuram-free • Box of 100 HS-HSC8010_ Only $10.90

BUY 8, GET 2GET

BUY

Earloop Masks• Blue, white, pink or lavender• Box 50HS-104____ Was $6.80

BUY ANY 4, GET 1GET

BUYBUY ANY 2

GET 1GETBUY

25% OFF

Criterion Pure Nitrile Gloves• Powder free• Blue• Sizes: XS-XL• Box 100HS-900448_ ONLY $9.90

(THAT’S ONLY $16.13 PKT)

ScheiningPricesLab

4 Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

You’ll love the match. They’ll love your lab.

Patients expect crowns and bridges to blend invisibly with their natural teeth—and disappointing aesthetics can mean a

remake. Lava™ Plus High Translucency Zirconia gives you more control over aesthetics so you can deliver an accurate

match for your dentist. With 3M’s patented shading technology, you get a true match to VITA Classic and VITA System

3D-Master ® Shades. And our fast and easy Dip Shading or Natural Gradient Shading provides unlimited individualisation.

Contact your Henry Schein Laboratory Representative to learn more and decide if Lava Plus zirconia is right for your lab.

3M, 3M Science. Applied to Life., ESPE and Lava are trademarks of 3M. All other trademarks are owned by other companies. © 3M 2016. All rights reserved.

ScheiningPricesLabAPRIL 2016

5Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

4 Tips For Achieving A Successful CastingBy Will Devine | March 03, 2016

In today’s world of dentistry, everyone is buzzing about the many benefits of digital dentistry and the bright future in store for the dental community as a whole. While it is true, there are many exciting things on the horizon in the digital realm, there are still many who rely on the lost wax casting technique to provide a quality low-tech option for the patient’s dental needs.

When going the traditional route for fabrication a few things must be considered; for example, what type and size of restoration, the alloy to be used and choosing the correct investment to produce the best results. Of course this is team effort and communication between the dentist and laboratory is crucial to avoid any misunderstandings and unfulfilled expectations.

1. Determine the type & size of restoration.

Once the prescription is received and the type of restoration is determined. The best alloy for the job must be chosen. Sometimes it may be full metal or a porcelain fused to metal crown of an acceptable design based on the patients tooth morphology. Regardless of the design the goal is to get a dense porosity free casting. In order to do this, you must weigh the completed wax-up of the restoration along with any spruing necessary to allow good metal flow and feed during the cooling process.

2. Determine Alloy to be used.

A good procedure to follow, when determining how much alloy to use, is to weigh the entire wax pattern and multiply that number by the specific gravity of the alloy used. For example, a pattern weighs 1.75gm and we are using a ceramic alloy with a specific gravity of (Density g/cc: 13.7) when we multiply the two numbers we get 23.975. This (23.975) is the number of grams of alloy needed for this casting plus a button or reservoir. The goal being to capture the restoration and the sprue, along with any reservoir without ending up with too large of a button. A large button will potentially pull alloy from our sprue network that can cause suck back porosity in the cast object.

3. Choose the proper investment.

It’s important to note that certain alloys, such as one with a high melting temperature or high fusing, will need a more heat resistant investment than a gypsum-based investment can provide. While all phosphate investments can survive higher heat situations, many have unique qualities based on the type chosen. Some are considered rapid, meaning they can go into a hot oven after a short set time, while some cannot. It is also critical to always familiarise yourself with all aspects of the instructions for any investment, because sometimes even rapid investments can’t be burned out rapidly under every situation; for example when using some digitally printed materials or when the restoration is very large or complex. In those situations a standard slow burnout might be indicated.

If only wax patterns are being used and the alloy doesn’t require burnout temperatures in excess of 1200°F, then a gypsum investment can be used. These investments use only water as their liquid component and require a metal ring and liner for the casting process. While they do have limitations, they

are still quite popular with those choosing noble alloys and produce an easy to divest, shiny casting surface.

4. Determine pattern placement.

Whichever investment and alloy is chosen, a very important aspect, and key to a successful casting once we are ready to invest, is pattern placement. Placing the pattern and the spruing configuration in the ring correctly can be the difference between an ideal result or a complete loss and remake.

With metal castings, ultimately we want any spruing and especially a runner bar if there is one, to be in the centre of mass in the ring, while the pattern should be placed outside the heat centre of the ring. Doing this will ensure the pattern cools first and the spruing network cools last, allowing the pattern to pull still molten alloy from the sprue. It is important to note, the centre of mass in the ring begins above the pinnacle of the base former. For all ceramic or glass pressings you should follow the ceramic manufacturer’s recommendations for pattern and sprue placement.

Final Thoughts

Every casting is unique and can sometimes require creative placement in the ring, if we remember to keep the pattern out of the heat centre and calculate the right amount of alloy needed we will achieve much more predictable results.

Heat CentreCentre of Mass

INCORRECT CORRECT

Source: USAF Medical Manual

ScheiningPricesLab

6 Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

6

DIACERA

Zirconia

EVE DIASYNT PLUS

EVE DIACERA SET HP 321Normally $144.75

EVE DIASYNT PLUS

Also available as CLINICAL

SETRA 322

Also availaCLINIC

SETRA 32

LITHIUM DISILICATE ZIRCONIA

POLISHING GUIDE

Open pore structurefor reduced heatgeneration

EVE

sble asAL

T22

EVE DIASYNT PLUS represents a new generation of grinding tools which achieve a high material removal rate, while allowing heat dissipation from the processed material.

This can be of great significance, as it has an effect on the future failure rate of the ceramic prosthesis.

Specifically, the thermal stress with work pieces processed using the synthetically bonded Diasynt Plus is significantly lower compared to a ceramic-bonded grinding system.

Zirconia is becoming more popular than ever before, and many manufacturers in the dental industry are offering materials for full anatomical zirconia restorations. The correct processing of zirconia has been a controversial issue for a long time, due to the risk of micro-cracking. Studies have now shown that finishing with the appropriate instruments is possible, which has the additional positive effect of long term stability of the restoration. The Diacera Polishing System from EVE

Provides a processing solution that not only produces a high gloss finish on zirconia, but has also been shown to increase the physical stability through polishing. Highly polished stable zirconia surfaces are now attainable.

L26DCmf L26DCSL20DCmf SL20DCH2DCmf H2DCH8DCmf H8DC

All prices are exclusive of GST and freight Fax 24 hours to order 0508 808 555

EVE polishers are available on request. Some items may be indent.

$108.56 per set

EVEDiacera KitThe Diacera Polishing System from EVE provides a processing solution that not only produces a high gloss finish on zirconia, but has also been shown to increase the physical stability through polishing. Highly polished stable zirconia surfaces are now attainable.EV-9041 Was $151.20 NOW ONLY $101.20**While stocks last

$50SAVE

BOLLÉ Purchase any 4 Bollé glasses and receive a pair of Bollé Voodoo Polarised glassesBL-_

BUY 4 GET 1GET

BUY

*Not for use with carbide burs or mixed metals

SULTAN Sporox 11 Disinfectant Solution• Powerful hydrogen peroxide based sterilant • High-level disinfectant for heat sensitive instruments*• 3.8LSU-75156 Was $101.80 NOW $86.53

15% OFF

VITA Easyshade V• Optimum shade determination,

maximum reliabilityV-DEASY5 Was $3,600.00 NOW $3,060.00

15% OFF

VERTEXDenture Bags• Hygienic packaging• Pkt 50VX-VDP50 $11.95

VERTEX Lathe Polishing Brush • White bristle• 45mm VX-VDP90006 ONLY $11.95

VERTEX Modelling Wax• Regular• Pink• 1kgVX-DVMOD0003$42.95

GC Fit Checker Advanced• A vinyl PolyEther Silicone for simple and precise checking and adjustment of all

prosthetic work• White - metal/acrylic• Blue - all ceramic• Exp: 10/2016GC-0132F57___ Was $120.40 NOW $96.32

Take the guesswork out of getting a precise fit

Copyright © 2014

FIT CHECKER™ ADVANCED WHITE Tube Pack

1x 42ml base1x 42ml catalyst1x 3g retarder1x mixing pad

FIT CHECKER™ ADVANCED WHITE Cartridge Pack

2x 48ml cartridge3x mixing tip IIS3x mixing tip IISS

FIT CHECKER™ ADVANCED BLUE Cartridge Pack

2x 48ml cartridge3x mixing tip IIS3x mixing tip IISS

GC Australasia Dental Pty Ltd 1753 Botany Road, Banksmeadow NSW 2019, Australia

T: +61 2 9316 4499 F: +61 2 9316 4196

www.gcasia.info

FIT CHECKER™ ADVANCED BLUE – all ceramic FIT CHECKER™ ADVANCED WHITE – metal/acrylic

Technique tipFIT CHECKER™ ADVANCED contains A-silicone components. Contact with latex gloves, unpolymerised resin and eugenol-containing materials may hinder its setting reaction. Before cementing restorations, clean with alcohol to remove any residual silicone oil as this could interfere with the cementation process.

Take the guesswork out of getting a precise fit

Copyright © 2014

FIT CHECKER™ ADVANCED WHITE Tube Pack

1x 42ml base1x 42ml catalyst1x 3g retarder1x mixing pad

FIT CHECKER™ ADVANCED WHITE Cartridge Pack

2x 48ml cartridge3x mixing tip IIS3x mixing tip IISS

FIT CHECKER™ ADVANCED BLUE Cartridge Pack

2x 48ml cartridge3x mixing tip IIS3x mixing tip IISS

GC Australasia Dental Pty Ltd 1753 Botany Road, Banksmeadow NSW 2019, Australia

T: +61 2 9316 4499 F: +61 2 9316 4196

www.gcasia.info

FIT CHECKER™ ADVANCED BLUE – all ceramic FIT CHECKER™ ADVANCED WHITE – metal/acrylic

Technique tipFIT CHECKER™ ADVANCED contains A-silicone components. Contact with latex gloves, unpolymerised resin and eugenol-containing materials may hinder its setting reaction. Before cementing restorations, clean with alcohol to remove any residual silicone oil as this could interfere with the cementation process.

20% OFF

ScheiningPricesLabAPRIL 2016

7Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

15% OFF

Aloe Care Glove• Latex• XS-L• Box of 100WN-71145_ Was $25.80 NOW $20.65

20% OFF

NORITAKE Katana Zirconia Disc• Multi-layer• 98.5mm• Available in 14, 18 and 22mm height• Light and dark shades availableMS-125-2_____ From: $365.25 From: $328.73

10% OFF

KEYSTONEMouthguard Material • Available colours: Blue, Red,Yellow,

Green, White, Black MZ-157019_ Was $5.00 NOW 5+ $4.25 ea

BUY 5, GET 15% OFFGET

BUY

WHIPMIXGeneral Purpose Vibrator 230V WM-10655 Was $222.80 NOW $189.38

$5 OFF

MEDESY Plaster & Wax Knife • Wooden handle• 175mm MED-202 Was $20.70 NOW $15.70

WHIP MIXResin Rock - Ivory• 5Kg WM-34970 Was $59.00 NOW $49.00

$10 OFF

$15 OFF*

KOMET Tungsten-Carbide Plaster & Acylic Cutting BurTH251E104060 Was $52.85 NOW $37.85

KOMETTungsten-Carbide Tapered Long Bur• With Cross cut TH33L104012X5 Was $33.30 NOW $18.30*While stocks last

LAB

OR

LAB

OR

ATO

RY381

H 251 SGFA

/ 5

Größe · Size Ø ¹⁄₁₀ mm 060

L mm 14,0

Handstück · HP

H251SGFA .104. ... 060

hide

) 50000 min-1/rpm Sicherheitsverzahnung mit LinksdrallGipsbearbeitung Safety toothing with a twist to the leftWork on plaster

H 79 SGEA

/ 5

Größe · Size Ø ¹⁄₁₀ mm 070

L mm 14,0

Handstück · HP

500 104 194225 ... H79SGEA .104. ... 070

hide

) 30000 min-1/rpm Sicherheitsverzahnung mit LinksdrallGipsbearbeitung Safety toothing with a twist to the leftWork on plaster

H 251 SGEA

/ 5

Größe · Size Ø ¹⁄₁₀ mm 060

L mm 14,0

Handstück · HP

500 104 274225 ... H251SGEA .104. ... 060

hide

) 50000 min-1/rpm Sicherheitsverzahnung mit LinksdrallGipsbearbeitung Safety toothing with a twist to the leftWork on plaster

H 251 GEA

/ 5

Größe · Size Ø ¹⁄₁₀ mm 060

L mm 14,0

Handstück · HP

500 104 274221 ... H251GEA .104. ... 060

hide

) 50000 min-1/rpm Sicherheitsverzahnung mit LinksdrallGips- und Kunststoffbearbeitung Safety toothing with a twist to the leftWork on plaster and acrylics

Hart

met

all

|

Fräs

er

Tung

sten

car

bide

|

Cut

ters

405800V0_gbl_Labor_2011_D-GB_akt_DE-EN.indd 381 29.09.2011 7:55:59 Uhr

$15 OFF

KOMETTungsten-Carbide All-purpose Metal Cutting Bur• For precious & non-precious metals

plus metal-cast alloys • Extremely durable & easy to ID with

gold-shank TH79NEX104040 Was $ 47.65 NOW $32.65*While stocks last

Whip Mix Digital Wax Carving Pencil • Single WM-10257 Was $514.30 NOW $400.00

$100OFF

OVER

BUY 2 OR MORE, GET 20% OFFGET

BUY

GCExadenture• Hydrophilic Vinyl Polysiloxane

impression material designed especially for Oral Mucossa

• Pack of 2 cartridges, 48ml each & 8 mixing tips

GC-EXADENTUREREF Was $88.60 NOW 2+ $70.88

$15 OFF*

APRIL 2016

DREVEDrufosoft Yellow, Purple, Red only• 120 x 3mm DR-4248_ Was $8.40 NOW $1.99 ea

VERTEXImplacryl Cold Liquid • Exp 03 2017• 500mlQty 8 VX-IMC500MLLQ Was $108.70 NOW $39.00

DENTAURUM Duplicating Material Colourless • 6kgQty 1

DN10860080 Was $358.50 NOW $99.00

WHALEDENTPindex Triplus Pin 16mm• 16mm • 1000 piecesQty 1 W-PX155 Was $319.50 NOW $50.00

WHIP MIXCasting Rings • 31.6mm x 55mm• 1 1/4” x 2 3/16”Qty 2 WM-11762 Was $32.00 NOW $9.00

KEYSTONEDispos-a-trap Refill 5 Gallon*Qty 1 MZ-7000368 Was $78.60 NOW $39.00*Excludes hoses

KOMETDIAMOND 849 HP 010 EachQty 13 D849104010 Was $5.60 NOW $2.50

KOMETBlue Occlusal Polisher • 100 low lustre metal alloy polisherQty 3 K-9661000030 Was $135.00 NOW $25.00

KOMETTungsten-Carbide Bur H23 HPQty 6 TH23104010X5 Was $33.85 NOW $12.00

VitaSuprinity Trial Kit Shade A2T and A3T LS-14Qty 23 V-EC4S0SS Was $99.60 NOW $65.00

VERTEXAcrylic Stain Liquid Needle • 0.4 x 27mmQty 4 VX-ACLIQNEEDLE Was $13.95 NOW $5.00

WHIP MIXInStep Wax Blockout Red • 1.5oz 42gQty 3 WM-03884 Was $29.00 NOW $15.00

WHIP MIXBottle Cap AssemblyQty 2 WM-09552 Was $119.00 NOW $39.00

WHIP MIXDigital Wax Carving Pencil - DQty 2 WM-10255 Was $1,004.00 NOW $475.00

END OF LINE

BEGOWironit Chrome Alloy • 1kgQty 2 BO-50030 Was $784.00 NOW $325.00

ZHERMACKTitanium Putty • 2.6KgQty 4 ZH-00606 Was $102.00 NOW $51.00

ZHERMACKHI TRAY Perforated Upper • Size 1Qty 3 ZH-D51SP Was $24.00 NOW $12.00

WHIP MIXCrucible Former • 1-1/4” 31.6mmQty 5 WM-11908 Was $29.40 NOW $15.00

WHIP MIXQuick Mount Plates White With Metal Disks • Pkt 20Qty 26 WM-28701 Was $102.00 NOW $60.00

8 Prices effective from 01/04/16 to 30/04/16 and exclude GST and freight (E&OE). Pricing not applicable to Govt or Corporate Accounts.

To order telephone 0800 SMILES, 8am to 5.30pm | freefax 0508 808 555, 24 hours [email protected] | www.henryschein.co.nz

ScheiningPricesLabClearance