New CV Donny Baru

DONNYTaman Cipta Asri Block G No.24Tembesi - Batu Aji HP : 0852 6469 3331Batam - Indonesia

CURRICULUM VITAE

Personal Details

Name : DonnyPlace / Date of Birth : Pekanbaru / September 25th, 1978Address : Taman Cipta Asri Blok G No. 24,

Tembesi - Batu Aji, Batam - Indonesia

Contact number : Ph +62778 – 3583961 Mobile – 0852 6469 3331

Nationality : IndonesianMarital Status : MarriedPassport No. : B 1130364Email address : [email protected]

Education1998 – 2001 : Polytechnic State of Medan - Indonesia, with majoring Electronic

Industrial. Medan – North of Sumatra, Indonesia1994 – 1997 : Upper Secondary School of State No.5 Pekanbaru – Riau, Indonesia1991 – 1994 : Lower Secondary School of State No.3 Pekanbaru - Riau, Indonesia1986 – 1991 : Elementary School Private of Beerseba Pekanbaru – Riau, Indonesia

.Working Experiences

Company Name : PT. Britoil Offhore IndonesiaPeriod : May 2013 – July 2016Position : Carpentry & HVAC Superitendent / Civil Superitendent

Responsibility :1. Assit & Support Project Manager in the activities for Carpentry ( Marine Interior

Accommodation Vessel ) & HVAC works2. Conduct site supervison and coordinate site with all trade Dept ( like as Steel, Pipes,

Electrical, Mechanical, Staging Dept )3. Prepare daily project schedule & maintain record files.4. Supervise Carpentry & HVAC contractor activities in shop fabrication & installation

onboard according to QA/QC standard and to meet production schedule5. Monitoring on Carpentry & HVAC Jobs Progress ( Daily, Weekly & Montly Progress)6. To Ensure all Carpentry & HVAC activities are carried out as per drawings7. Highlight material, technical problem to related depertment in charge.8. Inspection the Carpentry & HVAC work to ensure compliance with standard procedure for

installation, modification, and repair that meet / exceed customer expetatation.

Page 1

mailto:[email protected]


9. Review & check modification changes and feedback to Production Engineering Dept.10. To Monitor Subcontractor performance & quality.11. Conduct inspection with QA/QC and contractor during Carpentry & HVAC production

and installation process.12. To assist Purchasing Dept & Engineering for technical specification that expected13. To assist Commercial Dept. On Quatation time duration on additional jobs as requested.14. To follow & ensure HSE & safety supervisory system and regulation for prevention of any

types of accidents.

1. Project In-charge for Ship Building:

Project Name : Britoil Power & Energy ( 2 Unit )Owner Name : Britoil Offshore Singapore PTE PLTDType Ship : Platform Supply Vessel ( PSV ) Ulstein Design PX-121Job : New Installation for Carpentry & HVAC & Insulation Pipes

2. Project In-charge for Ship Repair :

Project Name : Britoil 121, 81, 72, 58, 18, 22, 49, 81, 50, 70Owner Name : Britoil Offhsore Singapore PTE PLTDType Ship : Anchor Handling ( Tow Tug )Job : Paneling, Ceiling, Floring, Furniture, Ducting, Pipe Insulation, Door, Air Con, Wooden Deck Seating, Galley Equipment. IMO Simbol.

Page 2


Company Name : PT. Drydocks World PertamaPeriod : Oct 2008 – May 2013Position : Carpentry & HVAC Supervisor ( Civil Supervisor )

Responsibility :

1. Direct Leading 20 persons of Carpentry (Marine Interior Accommodation) & HVAC Section2. Manage & direct supervise all daily activities Carpentry & HAVC Section.3. Manage & direct supervise workshop activities daily jobs4. Plan and schedule project, estimate time and material, supervise subordinates, Maintain

record and file & prepare report 5. Responsible & manage Sub Contractor for new ship building Installation outfitting

accommodation interior6. Responsible & Manage Sub contractor for Ship repair Carpentry, Ducting & Insulation Job7. Coordinate with Project Manager for Carpentry outfitting schedule that meet to owner

expectations8. Monitor the Project work for conformance with the provision of contract document from

owner9. Coordinate with the trade supervisor ( Piping, Hull, Painting, Electrical, Mechanical, Etc )10. Conduct Daily Meeting with Man Power & Subcontractor to target the expected job11. Supervise carpentry team effectively to complete the given job in schedule and with good

quality12. Able to schedule, monitor and coordinate progress of work to meet project expectations13. Conduct briefing every day to Carpentry team & Subcontractor for Safety issue / PPE14. To assist Purchasing Dept & Engineering for technical specification that expected

Project In-charge for Ship Building:

1.Project Name : H184, H186, H187, H188Owner Name : Bumi Armada TuahType Ship : Offshore Support Vessel (Length: 72 m)Job : Carpentry installation, Insulation, & wooden Deck Sheating

2. Project Name : H158, H191Owner Name : CoastlineType Ship : Offshore Heavy Support Vessel (Length: 198 m)Job : Install Teak Wood for Boom rest crane & Deck Store room

Size Teak Wood: 300mm x 300 mm x 5000 mm

Page 3


3.Project Name : V8209Owner Name : Gal InstallerType Ship : Conversion Crane BargeJob : Carpentry installation, Insulation, & Wooden Deck Sheating, Ducting

4.Project Name : V8208Owner Name : LeightonType Ship : Conversion Crane BargeJob : Carpentry installation, Insulation, & Wooden Deck Sheating, Ducting

Project In-charge for Ship Repair:

Total ship : More than 50 VesselsType Vessel : All Types

Jobs : Paneling, Ceiling, Insulation, Marine Door, Flooring, Ducting, Window glass, Furniture, Toilets, Wooden Sheating,Wooden Fender, HVAC

Company Name : CV. Andika Gabriel AccommodationPeriod : March 2008 – August 2008Position : Project Supervisor

Responsibility Area :1. Coordinate & On side Supervisor Carpenter / Accommodation vessel activities2. Responsible & Manage Sub Contractor for new Installation accommodation.3. Coordinate with Project Manager ( Owner ) 4. Monitor the Project work for conformance with the provision of contract document.5. Responsibility for daily schedule Job of Man Power.6. Coordinate with Quality Control for Quality of Material & Job Result.7. Conduct Daily Meeting with Man Power & Subcontractor.8. Responsibility & Manage Store area & Equipment.9. Prepare & Review Job result to Project Manager ( Owner )

Project Name : Accommodation Crane Tran shipper ( 67 m)Vessel Name : MV. Quito AKM 5 & AKM 3Project Location : PT. Sinbat ( Sekupang )

Page 4


Company Name : PT. Panasonic Battery BatamPeriod : May 2006 – December 2007Position : Purchasing Engineering

Responsibility Area :

1. Responsible & manage the purchase order of raw material, Electrical, Mechanical material, Packaging material, Equipment & Spare Part Material.

2. Handle Routine Activities, such as placing Purchase orders on the suppliers, follow up with suppliers for delivery on schedule, weekly review with Production Planning & sales Dept.

3. Determine if inventory quantities are sufficient for needs, ordering more materials when necessary.

4. Monitor Inventory as per forecast with planned delivery schedules.5. Contact suppliers & forwarder in order to schedule or expedite deliveries and to resolve

shortages, missed or late deliveries, Cancellations, and other problems. 6. Regular meeting with the Sales & Planning team to be placed for Material Procurement7. Compare prices, specifications, and delivery dates in order to determine the best bid among

potential suppliers8. Monitor & review internal supply chain process, defined & implementation MRP Purchasing

Module.9. Coordinates with QC Dept & Production for Quality of Material10. Do audit to supplier concerning the Quality & environmental Management system11. Select Qualified Supplier to get best pricing, Accuracy of lead time material.12. Obtaining Quotations from vendors and quotation analysis and subsequent negotiation of

rates13. Person In charge for ISO 9001 & 14001 in Purchasing Dept.14. Steering Committee & Internal Auditor for ISO 9001 & 14001

Company Name : PT. Panasonic Battery BatamPeriod : May 2003 – April 2006Position : Product Engineering

Responsibility Area :1. Design Battery Pack, Charger of Handy cam, Charger for Consumer as customer requirement,

include the Packaging to Customer2. Prepare product quotation, New Product Planning sheet, Development Schedule, Material

approval and mass production approval.3. Prepare internal sample for approval & Evaluation4. Sample process flow making & Sent to costumer5. Prepare new product specification for Internal & costumer6. Communicate by email or phone to Costumer & Mother company & Supplier

Page 5


7. Conduct New Product meeting/ Presentation, Design Review meeting and Product Review meeting.

8. Set up BOM (Bill of Material) of each product, especially when new Product will release, the product should be input in FOURT SHIFT as MRP software.

9. Maintain Bill of material for modification Part & Product.10. Set Up production line for New Product, together with Production Department until smooth

production running11. Conduct Presentation for Material/part & product modification12. As a Technical Buyer. Links between Purchaser and Supplier13. Negotiation parts price with supplier.14. Support Quality Control to prepare limit sample for material from supplier and finish good

product15. Support to Production and Quality Control Department if any quality problem

Training

Training Item Year Venue

Electronic Technician for Industry 2001 Medan

Understanding ISO 14001 2004 Batam

Technical Regulation Compliance for Product 2005 Batam

Quality & Environment Audit base on ISO 19011:2002

2006 Batam

Internal Audit ISO 9001-14001 2006 Batam

Company Awards• MD Award ( MRP Project) , PT. Panasonic Battery Batam, as Purchasing Team• Best Team Award, Director Prize, For Green Procurement, PT. Panasonic Battery Bata

SKILL

• Microsoft Office • ISO 90001 & 14001 Procedure• Visio• Autocad• MRP System

Page 6


• HSE Management System.

Page 7

Documents

New CV Donny Baru