Upload
giancarlo-cervantes
View
230
Download
0
Embed Size (px)
Citation preview
8/12/2019 NB NK SS New Presentation
1/25
Stainless steel end-suction pumpsNB/NK
XXX
8/12/2019 NB NK SS New Presentation
2/25
NB/NK SS End-suction
8/12/2019 NB NK SS New Presentation
3/25
What is important to the Industry?
Service and support
Competences: Application -- Products
System supplier and full line
Documentation
8/12/2019 NB NK SS New Presentation
4/25
Full-line supplier to the Industry
8/12/2019 NB NK SS New Presentation
5/25
The Most Commonly Used Pump in
Industry
Food & Pharmaceutical
Pulp & Paper
Chemical
Biofuel
Water Treatment
Power Plants
Automotive
Marine
Mining
8/12/2019 NB NK SS New Presentation
6/25
Which Liquids are pumped?
Basically every liquid in Industry with a viscosity between 1 cP and 500 cP apart from
food, beverages, WFI and pharmaceuticals, such as;
Water
Sea water
Solvents
Acids
Caustic
Various chemicals
Various oil products
Edible oil
Heating oil and water
etc
8/12/2019 NB NK SS New Presentation
7/25What do you get
8/12/2019 NB NK SS New Presentation
8/25
The best stainless steel end-suction range in the
worldRange size
Reliability
Efficiency
What do you get ?
8/12/2019 NB NK SS New Presentation
9/25
What do you get
Norm pump: NB/NK pumps are made according to EN733 and ISO 2858 Worlds biggest pumpreplacement market.
High reliable pumps through design and implementation of the newest technologies Plant reliability
Complete pump range ( 0 - 800 m/h) in stainless steel with 42 models: 1.4408, 1.4517 (duplex)
Full-line in end-suction both cast iron and stainless steel
High flexibility (custom-built solutions): Materials, shaft seals, bearing brackets, motors, etc
Markets best technical documentation Data booklet, CAPS, service video, certificates, etc
High efficiency on pumps with both standard motors and E-motors Low LCC
All pumps have been performance-tested before delivery
http://www.google.dk/imgres?imgurl=http://www.elmactechnologies.com/images/ATEX_logo.jpg&imgrefurl=http://www.elmactechnologies.com/flamearresters/understandingatexped.html&h=135&w=150&sz=7&tbnid=9JW_wXchFuMrlM:&tbnh=86&tbnw=96&prev=/images%3Fq%3DATEX%2Blogo&hl=da&usg=__msHObkhFOCuZ4ocsd_Xk-XkAxu0=&ei=knCSS5bHK8iG-QaLnuCaBg&sa=X&oi=image_result&resnum=4&ct=image&ved=0CBIQ9QEwAw8/12/2019 NB NK SS New Presentation
10/25
Product range: 42 pump models
Group 1:
D42
Group 2:D48 + 60
Group 3:
D24 + 32
Biggest range in
the world
More pumps
better efficiency
8/12/2019 NB NK SS New Presentation
11/25
ISO 2858 / EN22858 16 bar34 models defined in
standard(Grundfos has 42 models inthe ISO range)
Aimed towardsindustrial applicationsWe offer 25 bar
EN 733 (former DIN 24255)10 bar
29 models defined in standard(Grundfos has 42 models in the ENrange)Water related servicesWe offer 16 bar
Standards describe dimensions and duty points-External dimensions are generally accepted-Duty points are used as guidelines
Internal dimensions and features are not laiddown
Dim
ensions
Utility Process
Markets
ISO 2858
EN22858EN 733
8/12/2019 NB NK SS New Presentation
12/25
ISO 2858 / EN 22858
Industry Standard, Chemical pump
Maximum static system pressure of 16 bar (Grundfos offers 25 bar)
34 models defined in standard (Grundfos has 42 models in the ISO range)
Lower flow velocities
Stronger shafts / stiffer shafts
More space to build large shaft seals
8/12/2019 NB NK SS New Presentation
13/25
EN 733 (former DIN 24255)
Water standard
10 bar (Grundfos offers 16 bar)
29 models defined in standard (Grundfos has 42 models in range)
Water applications
Cooling, water supply, etc
8/12/2019 NB NK SS New Presentation
14/25Technical features
8/12/2019 NB NK SS New Presentation
15/25
NKG (ISO pumps), totally new concept on the
market for end-suction pumps - loose flanges
Loose flanges for 16, 25 or 40 bar rating.Stainless steel
Cast iron
DIN, JIS, ANSI
Loose flanges will only be available forstainless steel pumps.
Available in ductile cast iron and stainless
steel
The new rating will also be visible on thenew type designation.
The stainless steel pump housing in itself will
have a maximum pressure rating of 25 bar.
8/12/2019 NB NK SS New Presentation
16/25
NKG, reinforced bearing design
Standard bearing design - with Greased-for-life bearings (17,500 h)
Heavy-duty bearing design - with automatic grease lubrication or oil lubrication (100,000 h)
We recommend to use theheavy-duty bearing
design when the inlet
pressure is above 10 bar
8/12/2019 NB NK SS New Presentation
17/25
Bearing monitoringVibration and temperature
Vibration Monitoring =
shock pulse measuring
(SPM).
SPM-fittings are
standard on all heavy-
duty bearing designs.
8/12/2019 NB NK SS New Presentation
18/25
Bearing monitoringVibration andtemperature
Sensors can be
factory- mounted - or
ordered as an
accessory.
Only available on
heavy-duty bearing
designs.
8/12/2019 NB NK SS New Presentation
19/25
Double shaft seal solutions
Back-to-back seal
arrangement
Tandem seal
arrangement
Tandem or back-to-back
as a cartridge
8/12/2019 NB NK SS New Presentation
20/25
Back-to-back Applications:Dangerous, toxic, abrasive liquids
8/12/2019 NB NK SS New Presentation
21/25
TandemApplications:
Crystallising, high temperature sticky
liquids
8/12/2019 NB NK SS New Presentation
22/25
E-solutions, MGE motor
Alarm handling
Advanced failure analysis by loggingLow Flow Stop function
Anti-condensation heater (Standstill
heating)
Bearing monitoring for change of bearings
Run at power limit
Advanced use of pump data
External set point influence
BUS communication
Energy optimization
0 5 10 15 20 2555
60
65
70
75
80
85
90
Motorefficiency[%
]
Motor torque [Nm]
Motor: 5.5 kW, 4pol running at 1451 rpm
Energy optimisation: disabled
Energy optimisation: enabled
Powerlimit (Pshaft_max)
Current limit
Q
H
Normal working area
Extra working area
Normal speed
Speed n
Max speed
8/12/2019 NB NK SS New Presentation
23/25Documentation
8/12/2019 NB NK SS New Presentation
24/25
Documentation
8/12/2019 NB NK SS New Presentation
25/25
Thank You