Vers

a-M

atic 1/2” (12.7mm) metallic and non-metallic bolted

V E R S A M A T I C . C O M / E 5

SO

LUT

ION

SE5

Shoe ValveTechnologyOn / Off / On reliability,

with no costly air blow-by for excellent air efficiency

Multiple PortingOptions

Top, side and end porting forboth inlet and discharge

AdaptableFootprint

Allows for drop-in replacement inexisting system configurations

E5

Experience Superior Performance

VERSAMATIC.COM 3VERSAMATIC.COM2 D E L I V E R I N G Q UA L I T Y, I N T E R C H A N G E A B L E P U M P I N G S O LU T I O N S

Accessories / Kits:

Performance: Curves:

Protect Your Investment and Increase Uptime

Accessories & SpecificationsE5 1/2” Non-Metallic and Metallic Bolted

Features and Benefits E5 ½” Non-Metallic and Metallic Bolted

Dimensional Drawings:E5 Non-Metallic Bolted

E5 1/2” Bolted Metallic and Non-MetallicRubber and TPE Fitted

Flow Rate Adjustable to . . . . . . . . . . . . . . 0-11 gpm (53 lpm)Port Size Suction . . . . . . . . . . . . . . . . . 1/2” (12.7 mm) NPT Discharge . . . . . . . . . . . . . . . 1/2” (12.7 mm) NPTAir Inlet . . . . . . . . . . . . . . . . . . 3/8” (8.3 mm) NPTAir Exhaust . . . . . . . . . . . . . . 3/8” (8.3 mm) NPTSuction Lift Dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12’ (3.6 m) Wet . . . . . . . . . . . . . . . . . . . . . . . . . . . 30’ (9.1 m)Max Solid Size (Diameter) . . . . . 1/16” (1.6 mm)Shipping Weights Acetal . . . . . . . . . . . . . . . . . . . . . .8.5 lbs. (3.9 kg) Polypropylene . . . . . . . . . . . . . . . .8.5 lbs. (3.9 kg) Conductive Polypropylene . . . . . . . 12 lbs. (5.4 kg) PVDF . . . . . . . . . . . . . . . . . . . . . . . .12 lbs. 5.4 kg) Aluminum . . . . . . . . . . . . . . . . . . . 11 lbs. (3.9 kg) Stainless Steel . . . . . . . . . . . . . . . 17 lbs. (7.7 kg) Alloy C . . . . . . . . . . . . . . . . . . . . . . 17 lbs. (7.7 kg)

NOTE: Performance based on the following: elastomeric fitted pump, flooded suction, water at ambient conditions. The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.

Disc

harg

e Hea

d in

PSI

2 106

0

100 90 80 70 60 50 40 30 20 10 0

Meters Feet

240 220 200 180 160 140 120 100 80 60 40 20 0

75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 0

1

2

3

4

5

6

7

BAR 1284

40

0

5 10 15 20 25 30 35 45 50Capacity in Liters Per Minute

Capacity in U.S. Gallons Per Minute

Displacement Per Stroke, 0.022 Gal. (0.08 L)

48

12

2 AIR CONSUMPTION IN SCFMAIR PRESSURE IN PSI

SCFM M3/HR 2 3.4 4 6.8 8 13.6 12 20.4

2.0351.56

8.43214.02

10.06255.52

11.70297.14

11.17283.72

1/2" NPTDISCHARGE PORT

1/2" NPTSUCTION PORT

4X RELOCATE ABLE PLUGS

3/8" NPTAIR INLET

1.1128.19

.4010.16

7.01178.16

6.25158.75

8.30210.90

6.75171.45

6.12155.45

5.30134.62

4.30109.22

4.00101.60

1.6140.97

R.163.96

9.30236.32

R.163.96

3/8" NPTAIR EXHAUST

BOTTOM VIEW

Filter Regulator Drum Pump KitClean dry air for optimum performance and longevity. Automatic drain for maintenance

free operation.

Parts KitsSave time and money with compete parts kits. Repair it

once, repair it right.

Allows the pump to be easily attached directly to a drum for simple product dispensing.

E5Simple, Low Cost

Maintenance Air valve can be

easily refurbished with low cost

components (Seals / Bearing sleeves).

Dimensional Interchangeability

E5 Non-metallic interchanges with ARO PD05 ½” unit.

Extended Life Diaphragms

Integrated Plate Bonded PTFE diaphragms.

Ribbed backer, oversized integral plate, and deflection ridges extend flex life. No

outer plates mean no leak path or plate abrasion.

VERSA-RUGGED diaphragms deliver reliability in a variety of rubber and

thermoplastic materials.

Chemical Resistance

Air sections available in non-metallic or metallic construction materials.

Protective coating options also available.

Long Term Reliability

Modular pilot assemblyeliminates complexity,

and ensures consistent performance after

maintenance is performed.

Exclusive Elima-MaticAir Valve System

Unbalanced air valve delivers unsurpassed On / Off / On reliability.

Leak-Free Bolted Construction Bolted construction providesenhanced sealing capabilities

when pumping thin liquids.

2.0351.56

8.43214.02

10.06255.52

11.70297.14

11.17283.72

1/2" NPTDISCHARGE PORT

1/2" NPTSUCTION PORT

4X RELOCATE ABLE PLUGS

3/8" NPTAIR INLET

1.1128.19

.4010.16

7.01178.16

6.25158.75

8.30210.90

6.75171.45

6.12155.45

5.30134.62

4.30109.22

4.00101.60

1.6140.97

R.163.96

9.30236.32

R.163.96

3/8" NPTAIR EXHAUST

BOTTOM VIEW

2.0351.56

8.43214.02

10.06255.52

11.70297.14

11.17283.72

1/2" NPTDISCHARGE PORT

1/2" NPTSUCTION PORT

4X RELOCATE ABLE PLUGS

3/8" NPTAIR INLET

1.1128.19

.4010.16

7.01178.16

6.25158.75

8.30210.90

6.75171.45

6.12155.45

5.30134.62

4.30109.22

4.00101.60

1.6140.97

R.163.96

9.30236.32

R.163.96

3/8" NPTAIR EXHAUST

BOTTOM VIEWDimensions in Inches [mm] Tolerance: ±1/8" [± 3mm]

VM_E5bro-rev0915

VERSA-MATIC®

Warren Rupp, Inc.A Unit of IDEX Corporation800 North Main Street Mansfield, OH 44902 USA

Phone: 419.526.7296Fax: 419.526.7289versamatic.com

Distributed By:

©Copyright 2015 Warren Rupp, Inc. All Rights Reserved.

Industries & Applications

Soap delivery, apply wheel cleaner and wax

Car Wash

Chemical transfer / dispensing

Metal Finishing

Spray lacquers, solvents

Wood Finishing

Ink dispensing, apply glue

Printing

Coolant filtration / transfer

Machining

Glue transfer and dispensing

Pulp and Paper / Corrugation

ChemicalDrum transfer, chemical injection, chemical batching

LubricationDispensing of oil, windshield solvent, transmission fluid, and anti-freeze

ConstructionConcrete additives dispensing

Dimensional Drawings:E5 Metallic

Dimensions in Inches [mm] Tolerance: ±1/8” [± 3mm]

.9524.13

7.39187.73

9.35237.49

1/2" NPTDISCHARGE PORT

1/2" NPTSUCTION PORT

3/8" NPTAIR INLET

1.2531.75

.379.40

10.05255.27

6.25158.75

5.98151.87

4.00101.60

3.2582.55

4.38111.25

5.26133.60

2X 1.1328.70

4X R .143.56

8.39213.21

3/8 " NPTEXHAUST PORT

BOTTOM VIEW

.9524.13

7.39187.73

9.35237.49

1/2" NPTDISCHARGE PORT

1/2" NPTSUCTION PORT

3/8" NPTAIR INLET

1.2531.75

.379.40

10.05255.27

6.25158.75

5.98151.87

4.00101.60

3.2582.55

4.38111.25

5.26133.60

2X 1.1328.70

4X R .143.56

8.39213.21

3/8 " NPTEXHAUST PORT

BOTTOM VIEW