of 32/32
Multi-tasking OKUMA Multus B300W

Multi-tasking OKUMA Multus B300W. Multi-tasking Mori-Seiki NT

  • View
    263

  • Download
    13

Embed Size (px)

Text of Multi-tasking OKUMA Multus B300W. Multi-tasking Mori-Seiki NT

  • Slide 1
  • Multi-tasking OKUMA Multus B300W
  • Slide 2
  • Multi-tasking Mori-Seiki NT
  • Slide 3
  • Multi-tasking Mazak Integrex Mark IV
  • Slide 4
  • Multi-tasking Machine Definition
  • Slide 5
  • Multi-tasking Axis combinations
  • Slide 6
  • Multi-tasking Axis combinations
  • Slide 7
  • Multi-tasking Stock Setup
  • Slide 8
  • Multi-tasking Tool Setup Define lathe tools in B=0 position.
  • Slide 9
  • Multi-tasking Tool Setup Define lathe tools in B=0 position. Mazak Integrex Okuma Multus Mori Seiki NT
  • Slide 10
  • Multi-tasking Tool Angle One tool can be defined to work in any possible configuration using Tool Angle Tool Angle = BA: Angle (Okuma Multus) Tool Orientation on Machine: Indexes a tool to work on Left spindle or Right spindle and for back turning on either spindle (M602 or M603- Okuma Multus)
  • Slide 11
  • Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Okuma Multus - M602 or M603) N220G97 G95 S=3800 M42 M602 BA=90. TL=011011
  • Slide 12
  • Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Mori-Seiki NT D1 or D2)
  • Slide 13
  • Defining Lathe tool output Tool ID Code: MR2 For consistency, the general guidelines below are suggested
  • Slide 14
  • Multi-tasking Tool Orientation on Machine: Indexes a tool to define Position B (Integrex Mark IV - Matrix) (PROGRAM NAME - MULTI-TASKING DEMO_MJR1 DATE=DD-MM-YY - 22-02-09 TIME=HH:MM - 13:47 ) (POST LICENSE - IN-HOUSE SOLUTIONS INC.) (T11 | CNMG 08 OD R | DIA. - 11 | SUFFIX -.02 | INSERT - CNMG 12 04 08) G21 G69 G80 G40 G18 G90 G94 M205 (UPPER TURRET) G109 L1 (T11 | CNMG 08 OD R | DIA. - 11 | SUFFIX -.02 | INSERT - CNMG 12 04 08) (TOOLPATH GROUP - PREP STOCK ) G21 G10.9 X1 N1 G91 G28 X0. N1 G28 Y0. Z0. M901 M202 T11.02 T11 M06 G91 G28 X0. Z0. G90 M108 G0 G90 G53 B90. M107 G54...
  • Slide 15
  • Multi-tasking N220G97 G95 S=3800 M42 M602 BA=90. TL=111111 N230 M4
  • Slide 16
  • Multi-tasking Program: Facing / Drilling / ID Boring
  • Slide 17
  • Multi-tasking Misc Ops: Stock Flip
  • Slide 18
  • Multi-tasking Misc Ops: Stock Flip
  • Slide 19
  • Multi-tasking Face / Drill / ID Bore (rough) / ID Bore undercut finish
  • Slide 20
  • Multi-tasking ID Bore undercut N220G97 G95 S=2816 M42 M602 BA=-10. TL=330933 N230 M4
  • Slide 21
  • Multi-tasking OD Rough / Finish / Plunge Cut Parameters
  • Slide 22
  • Multi-tasking OD Finish Back turning N220G97 G95 S=509 M41 M603 BA=90. TL=004004 N230 M3
  • Slide 23
  • Multi-tasking Finish ID / Thread OD
  • Slide 24
  • Multi-tasking Mill slot / Transform toolpath T/Cplane TOP in Mill is C=90. BACK is C=0... N210G94 SB=2000 M241 M63 M9 BA=90. G52 TL=303030 N220 M13 N230 G138 N240 G17 N250 M146 N260 G0 C90. N270 M147 N280 G127 B90. N290 G0 Z155. N300 X37.5 Y0. N310 Z65....
  • Slide 25
  • Multi-tasking Circle Mill counterbore / Drill / Tap angled holes
  • Slide 26
  • Multi-tasking Misc Ops: Stock Flip back to OP1 position Geometry exists already. Transfer geometry not required
  • Slide 27
  • Multi-tasking Stock Flip Original position
  • Slide 28
  • Multi-tasking Face Stock recognition
  • Slide 29
  • Multi-tasking Rough / Semi-finish ID
  • Slide 30
  • Multi-tasking Rough OD / Finish OD
  • Slide 31
  • Multi-tasking Thread
  • Slide 32
  • Multi-tasking Finish corners