Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
MU8
UM- MU8 - 2 0 0 9 0 4 3 0 v e r A
User Manual
MU series professional loudspeaker system
Two way full range passive speaker
1
/ /
2 11
ELDER/ 3/MU8
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
13.
14.
15.
16.
17.
18.
19.
Read this instruction first before using this product.
Pay attention to all warnings.
Obey all operating instructions.
Do not expose this product to rain or moisture.
Do not block any ventilation openings. Install according to instructions of the manufacturer.
Do not install this product near any heat source, such as caliduct, heater, burner, or any other equipment with heat radiation (include amplifier).
Do not destroy the safety settings of the polarity or grounded connector. If the connector provided can't be plugged into the socket,please ask for the
electrician to change the socket.
Avoid the thread (especially the connector, socket, and the parts outside the body) to be under kick or heavily hustled.
Only use spare parts appointed by manufacturer.
In the event of lighting flash or nonuse for a long period, please put off the power supply and pull out the cord to avoid unexpected dangers.
When the damages in the case of the power cord or connector damages, liquids spill into the inside of the product or objects fall into,
exposure to rain or moisture, apparatus are out of work or breaks, please ask for the help from the professionals.
To avoid hazard of fire or electric shock, please avoid socket, extend thread, and power supply been overloaded.
Take care that objects do not fall into and that liquids are not spilled into the inside of the product as this will cause hazard of fire or electric shock.
Pay attention to the safety symbol in the outer side of the cover.
Only plug the connector in proper power supply of which the voltage complies with this equipment. Please follow the operating instruction or symbol.
This equipment must be protected from the spill or insufflations of liquid. Do not lay objects filled with liquid (such as vase) above this equipment.
Please keep this manual for future reference
Smear this equipment with dry cloth.
Please only use cart, stand, tripod, bracket and table that are appointed by manufacturer or sold together with the apparatus.Please avoid overturn the
cart or apparatus when push.
apparatus
12.
SAFETY INSTRUCTIONS
WARNING:
PLEASE READ THIS MANUAL FIRST
Thanks for buying products. Read this manual first as it will help you operate the system properly. Please keep this
manual for future reference.
WARNING:
WARNING:
This product must be installed by professionals. When using the hanging and rigging parts that are not appointed, please
ensure the intensity of the structure comply with the local safety criterion.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of electric shock, only qualified professionals can remove the cover of this system.
The lighting flash & arrowhead symbol within an equilateral triangle is intended to alert you that this part is not dielectric, and may cause the hazard of electric shock.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions.
ATTENTION: This system must be connected to the output socket with grounded thread.
ATTENTION: Don't refit the system or spare parts without being authorized as this will cause the hidden trouble.
WARNING: Don't lay the fire source (such as litten candle) above the equipment.
ATTENTION: Please operate cautiously even when the main socket or the coupling apparatus is used as disconnection equipment.
MU8
2
4
6
3
3
3
3
4
4
4
5
6
6
7
7
7
8
/ /
3 11
ELDER/ 3/MU8
CONTENT
Features
Description
Applications
Frequency Response And Impedance Curve
CONTENT
CONNECTION
Terminal Plate
NL4 Connection
INSTALLATION
Installation Accessories
Installation Reference
Product information subjects to be updated without notification, please visit www.elderaudio.com for the latest update.
INTRODUCTION
System Connection Reference
Loudspeaker Connection
Technical Sheet
2D Dimension
TECHNICAL SPECIFICATION
MU series professional loudspeaker system
MU8
3
MU8
/ /
4 11
ELDER/ 3/MU8
INTODUCTION
Features
Description
Two way full range passive speaker
Two way full range phase inverted speaker, which adopt Coaxial transducer with 8" LF part and 1.4" HF part
o oDispersion is 90 X90 .
Advanced crossover design make sure the reliability of tweeter.
Sensitivity is 94dB, Max is SPL 115dB.
RMS power is 150W, is peak power 600W.
Support flange, three mounting points.
Powder coated grille can be used outdoors for 5 years. The foam backside of the grille can prevent the rain.
Advanced paint materials and advanced painting technology make the surface very rigid.
The sound is very clean, powerful and stretchy.
Single Neodymium magnet design on the coaxial transducer
Description Applications
Cabinet is made of 15mm birch plywood with advanced environmental protection.
Polyurethane-based painting which is very rigid. The cabinet strength reach to 4500N.
Q235 grille is coated by powder to provide strong ultra-Weatherability, can be used outdoors for 5 years. The backside foam of grille can prevent the rain.
MU8 adopts the built-in crossover and single channel amplif ier module.
MU8 is mainly designed for conference room, multifunctional hall, auditorium, church, living performance. It can be used separately, or can be used with MU12B together.
multifunctional hall
small hall
Church
conference room
background music
3 MU8 is a very compact design active speaker integrated
the coaxial transducer.It consists of one 8" Neodymium woofer
with 34MM voice coil and one 1.4" compression driver . The
rated power is 150W. Symmetrical magnet circuit design reduce
the impar HD effectively and enhance the LF sound quality.
MU series professional loudspeaker system
1
2
1
2
3
4
MU8
INPUT
OUTPUT
No.:
ELDER AUDIO MANUFACTURE CO., LTD
1+ 1- : INPUT
1+2+
1-
2-
MU8Warranty does not cover damage caused
by incorrect installation,operation or overload.
SENSITIVITY(1W/1m)
IMPEDANCE
NET WEIGHT
94dB
8
8kg
POWER(RMS)
FREQUENCY 80Hz-20kHz
140W
1+
1-
+-
+-
LOW
HIGH
1+ 1- INPUT
/ /
5 11
ELDER/ 3/MU8
CHA BRIDGE IN
CHB
SIGNAL GND
SIGNAL +
SIGNAL -
BRIDGE
PARALLEL
STEREO ON
OFF50HZ
25HZ
ON
OFF
CHB OUTPUT
CHA OUTPUT
POWER CABLE
FUSE
-B+
-A+
-
+
5HZ
CAUTION
BR
IDG
E
OUTPUT ASSIGNMENT:
BRIDGE MONO OUTPUT:
CHA : PIN1+ : SIGNAL GND
CHA: PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - :
CHA SIGNAL CHA GNDCHB SIGNAL CHB GND
CHB: PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - :
CHB SIGNAL CHB GND
PIN2+ :
!
Serial no:Special design for big power
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODE LF FILTER GROUNDCLIPLIMITERINPUT
PIN1:
PIN2:
PIN3:
MU8MU12B
INPUT
MU8 OUTPUT
MU8MU12B
INPUT
MU8 OUTPUT
CHA BRIDGE IN
CHB
SIGNAL GND
SIGNAL +
SIGNAL -
BRIDGE
PARALLEL
STEREO ON
OFF50HZ
25HZ
ON
OFF
CHB OUTPUT
CHA OUTPUT
POWER CABLE
FUSE
-B+
-A+
-
+
5HZ
CAUTION
BR
IDG
E
OUTPUT ASSIGNMENT:
BRIDGE MONO OUTPUT:
CHA : PIN1+ : SIGNAL GND
CHA: PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - :
CHA SIGNAL CHA GNDCHB SIGNAL CHB GND
CHB: PIN 1+ :PIN 1 - :PIN 2+ :PIN 2 - :
CHB SIGNAL CHB GND
PIN2+ :
!
Serial no:Special design for big power
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODE LF FILTER GROUNDCLIPLIMITERINPUT
PIN1:
PIN2:
PIN3:
MU8
MU8
Terminal Plate
CONNECTION
Two NL4 connectors are available for amplifier connections. Paralelled connector is very convenient for another speaker connection.
1. Connect 2. Disconnect
System Connection Reference
Attention: The impedance of connected speaker must match the impedance of amplifier output. Attention: Make sure the polarity of speaker and amplifier correctly.
Crossover
NL4 Connection
MU series professional loudspeaker system
Reference A:
Reference B:
1+
1-2+
2-
1+
1-2+
2-1+
1-2+
2-
0.5 0.75 1.0 1.5 2.5 4.0
2 Ohm
4 Ohm
8 Ohm
0
15
30
46
61
76
0
50
100
150
200
250
5
MU8
/ /
6 11
ELDER/ 3/MU8
CONNECTION
Wire leng
thM
eters
Wire leng
thFeet
1. Banana plugs to NL4
Speaker Wiring
2. NL4 to NL4
3. Consumption curve of connection cable(Only for reference, the result is different if adopting the different cables)
Connect to amplifier Connect to speaker
Connect to amplifier Connect to speaker
2Wire diameter mm
MU series professional loudspeaker system
6
MU8
/ /
7 11
ELDER/ 3/MU8
INSTALLATION
Installation Accessories Installation Reference
MU series professional loudspeaker system
1. Speaker stand
Support flange and three special mounting points are very convenient for the different applications.
Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation .
1.Reference A
2.Reference B
3.Reference C
80Hz-20kHz
94dB
140W (RMS)280W (MUSIC)560W (PEAK)
8 ohms
90 90
NL4 2
280 262 380mm(11.0 10.3 15.0in)
115dB/121dB(PEAK)
70Hz-20kHz
1.5kHz
8kg(17.6 lb)
9kg(19.8 lb)
1
2
3
4
340 320 460mm(13.4 15.6 18.1in)
200001000010001005020
70
40
7
4
70
80
90
100
110
Se
ns
itiv
ity (d
B)
Imp
ed
an
ce (O
hm
s)
7
MU8
60
Frequency (Hz)
/ /
8 11
ELDER/ 3/MU8
13
23
Speaker Testing Method
1. Frequency response
Use Pink noise to test the speaker in the anechoic room, adjust the level to make the speaker work at its rated impedance and the power output is 1W, then test the frequency response 1m away from the speaker.
2. Sensitivity
Use full range Pink noise which was modified by EQ curve to test the speaker in the anechoic room, enlarge the signal to make the speaker work at its rated impedance and the power output is 1W, then test the sensitivity 1m away from the speaker.
3. MAX.SPL
Use full range Pink noise which was modified by EQ curve to test the speaker in the anechoic room, enlarge the signal to make the speaker work at its instant power output level, then test the SPL 1m away from the speaker.
4. Rated Power
Use the pink noise according to IEC#268-5 to test the speaker, enlarge the signal for continuous 100hours, the rated Power is the power when the speaker will not incur hot damage or mechanics damage.
2 Wooden handle
Specification
Frequency response curve Impedance curve
Frequency response curve & Impedance curve
Wedge shape
Polyurethane-based painting. Steel grille is coated by powder to provide strong ultra-Weatherability.
Sensitivity(1W@1m):
Power:
Dispersion H V :
N.W.(Pcs):
System:
Frequency response(-3dB):
Frequency response(-10dB):
Max.SPL(1m):
Rated impedance:
Crossover point:
Cabinet:
Handle:
Surface:
Connector:
G.W.(Pcs):
Cabinet dimension: (W D H)
Package dimension: (W D H)
TECHNICAL SPECIFICATION MU series professional loudspeaker system
Installation:
Full range passive speaker
1X1.4" compression driver
1X8" woofer
Tweeter:
Woofer:
support flange, three mounting points
speaker standOptional accessory:
8
MU8
380m
m[1
4.96
n]
280mm[11.02in]
262m
m[1
0.31
in]
/ /
9 11
ELDER/ 3/MU8
Top view
Front viewSide view Back view
Bottom view
2D Dimension
TECHNICAL SPECIFICATIONMU series professional loudspeaker system
Notes:
/ /
10 11
ELDER/ 3/MU8
/ /
11 11
ELDER/ 3/MU8