MST Textiles, clothing and footwear - nominal hours … National MST Textiles, Clothing and Footwear Training Package. This Guide is designed to aid Registered Training Organisations

Page 1

Department of Training and Workforce Development

MST Textiles, Clothing and Footwear

TRAINING PACKAGE

Version 1 & 1.1

WA NOMINAL HOURS GUIDE

Page 2


Introduction

This Guide has been generated to enable the stakeholders in this Industry in Western Australia to participate in the managed implementation of the National MST Textiles, Clothing and Footwear Training Package.

This Guide is designed to aid Registered Training Organisations (RTOs) to convert from existing Training Package qualifications to new Training Package qualifications within the scope of their training delivery.

The Guide should be read in conjunction with the endorsed components of the Training Package.

Version 1.1 of the MST Textiles, Clothing and Footwear was released by Training.Gov.Au (TGA) on the 21/11/2016. Version 1.00 of the MST Textiles, Clothing and Footwear was released by Training.Gov.Au (TGA) on the 04/07/2016.

Transition Arrangements

Registered Training Organisations (RTOs) are required to deliver Training Package qualifications in accordance with the Standards for RTOs. For further information visit the Training Accreditation Council website www.tac.wa.gov.au.

Nominal Hours

Nominal hours are the hours of training notionally required to achieve the outcomes of units of competency.

Nominal hours are identified for nationally endorsed qualifications. Nominal hours may vary for a qualification depending on the selection of units of competency.

In Western Australia, nominal hours are used as a mechanism for funding allocation.

Contact Details

For Training Package content information, please contact: Training Curriculum Services Tel: (08) 6551 5541 Email: [email protected]

mailto:[email protected]

Page 3


Qualifications and Nominal Hours

The following table provides a summary of the qualifications and nominal hours in the industry.

National Code National Title Nominal Hours

MST20116 Certificate II in TCF Production Support 417

MST20216 Certificate II in TCF Production Operations 472

MST20316 Certificate II in Leather Production 590

MST20416 Certificate II in Laundry Operations 580

MST20516 Certificate II in TCF Services and Repair 485

MST20616 Certificate II in Applied Fashion Design and Technology 451

MST30116 Certificate III in Clothing and Textile Production 652

MST30216 Certificate III in Manufactured Textile Products 868

MST30316 Certificate III in Millinery 612

MST30416 Certificate III in Footwear 712

MST30516 Certificate III in Leather Production 930

MST30616 Certificate III in Laundry Operations 920

MST30716 Certificate III in Dry Cleaning Operations 1160

MST30816 Certificate III in Applied Fashion Design and Technology 835

MST40116 Certificate IV in Textile Design, Development and Production 1174

MST40216 Certificate IV in Clothing Production 1060

MST40316 Certificate IV in Custom-Made Footwear 1330

MST40416 Certificate IV in Millinery 986

MST40516 Certificate IV in Applied Fashion Design and Merchandising 966

MST50116 Diploma of Applied Fashion Design and Merchandising 1576

MST50216 Diploma of Textile Design and Development 2140

MST60116 Advanced Diploma of Applied Fashion Design and Merchandising 2546

MST60216 Advanced Diploma of Textile Design and Development 2720

Page 4


Units of Competency and Nominal Hours

The following table provides a summary of the units of competency and nominal hours in the industry.

National Code National Title Nominal Hours

MSTCL1001 Produce a simple garment 40

MSTCL2001 Use a sewing machine 30

MSTCL2002 Provide hand sewing and finishing support 20

MSTCL2003 Perform basic maintenance of headwear 20

MSTCL2004 Sew components 50

MSTCL2005 Use specialised machinery or processes to assist TCF production 30

MSTCL2006 Press work 20

MSTCL2007 Lay up, mark and cut uncomplicated fabrics and lays 20

MSTCL2008 Finish garment production 20

MSTCL2009 Despatch work 10

MSTCL2010 Modify patterns to create basic styles 50

MSTCL2011 Draw and interpret a basic sketch 25

MSTCL2012 Organise and plan own work in a home-based production environment 50

MSTCL2013 Block and shape headwear by machine 30

MSTCL2014 Access and use information resources for clothing production operations 20

MSTCL2015 Finish headwear 30

MSTCL2016 Trim headwear 40

MSTCL2017 Press work for production support 35

MSTCL2018 Perform bundling, ticketing and labelling in TCF operations 25

MSTCL2019 Sew components, complex tasks 65

MSTCL2020 Lay up and mark uncomplicated fabrics and lays 45

MSTCL3001 Identify fabric performance and handling requirements 40

MSTCL3002 Prepare and produce a complex whole garment from specifications 60

Page 5


MSTCL3003 Perform garment repairs and alterations 40

MSTCL3004 Press whole garments 20

MSTCL3005 Lay up and cut complicated fabrics and lays 30

MSTCL3006 Assemble bra or swimwear 40

MSTCL3007 Embellish garment by hand or machine 40

MSTCL3008 Set and produce digital embroidery 30

MSTCL3009 Develop patterns from a block using basic patternmaking principles 50

MSTCL3010 Sew woven and stretch knit garments 40

MSTCL3011 Contribute to garment production process improvements 30

MSTCL3012 Make marker for complicated fabrics and lays 40

MSTCL3013 Interpret patterns and apply pattern information 30

MSTCL3014 Interact and communicate with garment production personnel 20

MSTCL4001 Perform sample machining of advanced construction garments 115

MSTCL4002 Assemble and fit commercially tailored or bespoke garments 80

MSTCL4003 Measure, lay up and cut custom-made garments 120

MSTCL4004 Determine and perform garment maintenance or repair 30

MSTDC2001 Provide customer service in a dry cleaning or laundry enterprise 50

MSTDC2002 Conduct safe handling of dry cleaning chemicals and solvents 60

MSTDC2003 Identify pre- and post-spotting requirements 85

MSTDC2004 Operate dry cleaning machines 140

MSTDC2005 Operate wet cleaning machines 60

MSTDC2006 Operate finishing equipment 135

MSTDC2007 Receive and sort articles for cleaning 60

MSTDC2008 Carry out final inspection of articles 60

MSTDC2009 Identify fabric and garment cleaning requirements 60

MSTDC3001 Perform spotting function in dry cleaning operations 60

MSTDC3002 Dry clean garments with special treatment requirements 40

MSTDE3001 Apply hooping and fabric handling techniques 20

Page 6


MSTDE3002 Digitise artwork for computerised embroideries 25

MSTDE3003 Apply advanced digitising techniques to produce computerised embroideries 30

MSTDE3004 Generate artwork for computerised embroideries 25

MSTDE3005 Replicate traditional hand craft techniques 40

MSTDE3006 Digitise text to produce embroidered lettering 25

MSTDE3007 Demonstrate features of digitised embroidery machines 15

MSTDE3008 Produce embroidery from digitised images 20

MSTDE3009 Maintain computerised embroidery machines 35

MSTFD2001 Design and produce a simple garment 60

MSTFD2002 Apply printing techniques to produce Indigenous textile designs 80

MSTFD2003 Apply dyeing techniques to produce Indigenous textile designs 80

MSTFD2004 Work within an Indigenous cultural framework 40

MSTFD2005 Identify design process for fashion designs 30

MSTFD2006 Use a sewing machine for fashion design 70

MSTFD3001 Market design product to local outlets 30

MSTFD3002 Design and produce indigenous printed textiles to a brief 80

MSTFD3003 Prepare design concept for a simple garment 40

MSTFD3004 Draw a trade drawing for fashion design 30

MSTFD3005 Use skin, fur or leather to create fashion or textile products 40

MSTFD4001 Apply design studio process 60

MSTFD4002 Apply principles of colour theory to fashion design development 25

MSTFD4003 Assist in preparation of preliminary design concepts 50

MSTFD4004 Calculate cost estimates for fashion products 20

MSTFD4005 Communicate and sell design concepts 30

MSTFD4006 Interact and network with fashion industry participants 60

MSTFD4007 Conduct quality assurance for patterns and garments 30

MSTFD4008 Construct stock size block for garment to meet size and fit specifications 40

MSTFD4009 Create and edit digital embroidery designs 20

Page 7


MSTFD4010 Create pattern to meet design specifications applying advanced patternmaking principles 80

MSTFD4011 Cut fabrics for prototype designs 20

MSTFD4012 Develop product specifications for fashion design 20

MSTFD4013 Grade 2-D patterns 80

MSTFD4014 Identify influences on contemporary fashion designs and construction techniques 30

MSTFD4015 Create pattern from block to meet customer specifications 50

MSTFD4016 Sew design prototypes 60

MSTFD4017 Source materials and resources for production of fashion designs 30

MSTFD4018 Use and apply sizing systems appropriate for fashion design 20

MSTFD4019 Use colourisation techniques on fabrics 30

MSTFD4020 Use electronic fashion design tools 40

MSTFD4021 Drape fabrics to make patterns 40

MSTFD5001 Design bras and swimwear 30

MSTFD5002 Develop and test patterns for bras and swimwear 50

MSTFD5003 Analyse fit model 40

MSTFD5004 Develop marketing plans for fashion products 50

MSTFD5005 Manipulate fabrics to create new finishes 60

MSTFD5006 Evaluate fashion designs against set criteria 30

MSTFD5007 Analyse influences on contemporary fashion designs 50

MSTFD5008 Conduct fashion design purchasing 40

MSTFD5009 Cost production of fashion or textile designs 40

MSTFD5010 Develop and present design concepts within specific guidelines 60

MSTFD5011 Produce fashion illustrations to assist product visualisation 70

MSTFD5012 Perform contour draping 50

MSTFD5013 Develop merchandising plans for fashion products 40

MSTFD5014 Construct complex blocks for fashion garments 100

MSTFD5015 Develop patterns for complex fashion garments 90

MSTFD5016 Grade complex patterns 60

Page 8


MSTFD5017 Apply design studio processes to meet client brief 90

MSTFD5018 Determine and specify advanced construction processes 90

MSTFD5019 Analyse individual fit and make pattern alterations 100

MSTFD5020 Assess impact of current fashion industry innovations and practices 90

MSTFD5021 Conduct digital patternmaking and grading 135

MSTFD5022 Develop digital costing markers 115

MSTFD6001 Evaluate commercial viability of designs 60

MSTFD6002 Manage product development of fashion designs 60

MSTFD6003 Manage fashion design process 80

MSTFD6004 Manage advanced patternmaking processes 90

MSTFD6005 Drape structured over-garments 80

MSTFD6006 Develop a fashion range 90

MSTFD6007 Implement specialised patternmaking technologies 100

MSTFD6008 Apply studio processes to create and produce designs for commercial production 90

MSTFD6009 Analyse fashion industry textiles to guide commercial development 60

MSTFP1001 Embellish footwear 80

MSTFP2001 Identify materials used in footwear production 50

MSTFP2002 Perform stuff cutting 40

MSTFP2003 Cut printed materials by machine 40

MSTFP2004 Cut non-printed leather by machine 40

MSTFP2005 Operate machine to sew upper 40

MSTFP2006 Machine upper according to product requirements 50

MSTFP2007 Last shoe by machine 60

MSTFP2008 Perform moulding operations 50

MSTFP2009 Perform footwear finishing operations 60

MSTFP2010 Repair footwear product 60

MSTFP2011 Perform table-based operations 50

MSTFP3001 Cut leather by hand 50

Page 9


MSTFP3002 Hand last shoe 60

MSTFP3003 Assemble shoe by hand 60

MSTFP3004 Contribute to footwear production improvement processes 70

MSTFP3005 Supervise footwear production operations 70

MSTFP3006 Apply foot anatomy principles to footwear production 80

MSTFP4001 Develop design for custom-made footwear 80

MSTFP4002 Make patterns for custom-made footwear 80

MSTFP4003 Prepare, cut and sew custom-made shoe components 80

MSTFP4004 Assemble and finish custom-made shoe 80

MSTFP4005 Fit custom-made footwear 80

MSTFR2001 Assess and cost footwear repair job 20

MSTFR2002 Supply and fit new heel block 40

MSTFR2003 Attach non-slip sole or heel top piece 20

MSTFR2004 Replace half leather sole 40

MSTFR2005 Sew or patch by machine 30

MSTFR3001 Replace full sole and heel 40

MSTFR3002 Operate sole stitcher 40

MSTFR3003 Hand sew welt 40

MSTFR3004 Re-cover footwear 40

MSTFR3005 Dye footwear or leather product 30

MSTFR3006 Undertake specialised footwear repair techniques 50

MSTGN2001 Use steaming and pressing equipment in TCF production 20

MSTGN2002 Package and handle TCF items for storage or despatch 20

MSTGN2003 Work in the TCF industry 40

MSTGN2004 Work in a team environment 30

MSTGN2005 Perform minor maintenance 40

MSTGN2006 Perform test or inspection to check product quality 40

MSTGN2007 Select, transfer and remove materials and products 40

Page 10


MSTGN2008 Coordinate work of team or section 30

MSTGN2009 Operate computing technology in a TCF workplace 20

MSTGN2010 Perform tasks to support production 30

MSTGN2011 Identify fibres, fabrics and textiles used in the TCF industry 70

MSTGN2012 Work safely with chemicals in TCF operations 50

MSTGN3001 Control production in a section of a TCF enterprise 60

MSTGN3002 Organise and plan own work to achieve planned outcomes 30

MSTGN3003 Estimate and cost job 50

MSTGN3004 Supervise operations in a TCF enterprise 50

MSTGN3005 Plan tasks to assist production operations 80

MSTGN3006 Draw 3-D designs 60

MSTGN3007 Monitor and operate trade waste 60

MSTGN4001 Coordinate or set up machines for product change 60

MSTGN4002 Participate in product engineering 80

MSTGN4003 Install and commission process and machine control programs 60

MSTGN4004 Analyse TCF merchandising and marketing principles 60

MSTGN4005 Plan and implement production within a work area 50

MSTGN4006 Apply TCF market supply systems 60

MSTGN4007 Contribute to the development of products or processes 100

MSTGN4008 Analyse product and determine machine settings 50

MSTGN4009 Design production tooling 60

MSTGN4010 Implement and monitor WHS and environmental systems in the workplace 60

MSTGN4011 Coordinate the quality system and procedures 45

MSTGN4012 Fabricate or machine tooling 50

MSTGN4013 Manage technical processes 50

MSTGN5001 Participate in production planning processes 60

MSTGN5002 Coordinate quality assurance for TCF products and services 80

MSTGN5003 Work with international TCF supply chains 40

Page 11


MSTGN5004 Manage installation and commissioning of equipment and systems 80

MSTGN5005 Provide global operations support 100

MSTGN5006 Plan and organise non-routine testing 100

MSTGN5007 Prepare procedures and specifications for TCF operations 60

MSTGN5008 Identify opportunities in the TCF market 70

MSTGN5009 Develop and test TCF products or processes 80

MSTGN6001 Develop and implement a sales or marketing strategy for fashion or textile items 60

MSTGN6002 Manage quality system and procedures 100

MSTGN6003 Research and evaluate processes and products 80

MSTGN6004 Negotiate and manage contracts to produce finished design products 80

MSTGN6005 Manage production processes 100

MSTGN6006 Map and establish TCF supply chain process 80

MSTHL2001 Undertake receival, storage, handling and preservation of materials or products 40

MSTHL2002 Perform fellmongering processes 40

MSTHL2003 Operate machines to prepare hides or skins for tanning 60

MSTHL2004 Sort, grade or class hides, skins or leather 60

MSTHL2005 Trim hides, skins or leather 40

MSTHL2006 Use drum or vessel to prepare or tan hides or skins 60

MSTHL2007 Operate machines to crust hides, skins or leather 60

MSTHL2008 Use drum or vessel to crust hides, skins or leather 60

MSTHL2009 Perform drying operations 60

MSTHL2010 Finish hides, skins or leather 60

MSTHL3001 Determine suitability of hide, skin and leather for leather goods 40

MSTHL3002 Determine tanning requirements for hide, skin and leather 40

MSTLA2001 Apply infection control policies and procedures in laundry operations 40

MSTLA2002 Operate washing machines 60

MSTLA2003 Control washing extractor operation 60

MSTLA2004 Perform linen rewash 40

Page 12


MSTLA2005 Operate hydro extractor 40

MSTLA2006 Perform conditioning and drying processes 40

MSTLA2007 Finish products for despatch 30

MSTLA2008 Repair damaged laundry items 40

MSTLA2009 Inspect, fold and pack theatre linen 65

MSTLA2010 Prepare products for storage or despatch 60

MSTLA3001 Perform advanced laundry operations 60

MSTLA3002 Determine linen rental requirements 50

MSTLG2001 Cut by machine 60

MSTLG2002 Sew leather by machine 80

MSTLG2003 Perform table work 70

MSTLG2004 Operate leather production machines 70

MSTLG2005 Split leather pieces 40

MSTLG2006 Identify materials used in leather goods production 60

MSTLG2007 Skive leather pieces 60

MSTLG3001 Make a prototype 60

MSTLG3002 Cut leather by hand 70

MSTLG3003 Sew leather by hand 80

MSTLG3004 Apply finishes to leather products 60

MSTLG3005 Grade leather 60

MSTLG3006 Apply pattern specifications to saddlery products 150

MSTLG3007 Assemble saddle components 200

MSTMF4001 Select and adjust prefabricated footwear-related orthoses 60

MSTMF4002 Conduct medical grade footwear assessments for clients with footwear-related medical conditions 80

MSTMF4003 Modify medical grade footwear 30

MSTMF4004 Select and adjust prefabricated medical grade footwear and accessories 30

MSTML1001 Make a simple headpiece 40

MSTML2001 Identify materials used in millinery 40

Page 13


MSTML2002 Make flat patterns for millinery 20

MSTML2003 Produce and attach millinery trims 30

MSTML2004 Produce felt for millinery 50

MSTML2005 Place and cut millinery patterns 20

MSTML2006 Make millinery with flat pattern components 20

MSTML2007 Block and shape millinery by hand 30

MSTML2008 Assemble simple blocked millinery components 90

MSTML2009 Apply millinery sewing and adhesion techniques 30

MSTML3001 Make flat patterns from hat blocks 40

MSTML3002 Block and shape complex millinery 80

MSTML3003 Make millinery using patterns derived from hat block 40

MSTML3004 Identify performance and handling requirements of millinery materials 30

MSTML3005 Assemble complex blocked millinery components 90

MSTML4001 Undertake specific millinery construction techniques 120

MSTML4002 Rejuvenate millinery 50

MSTML4003 Present and display millinery 15

MSTML4004 Manage millinery procurement and cost millinery products 30

MSTML4005 Undertake initial millinery consultation, subsequent fittings and finishing 40

MSTML4006 Sketch and prepare millinery fashion designs 40

MSTML4007 Make millinery patterns 40

MSTML4008 Undertake couture millinery 90

MSTML4009 Modify millinery blocks to make new shapes 40

MSTML4010 Make couture trims 40

MSTTD4001 Produce knitted textile samples 80

MSTTD4002 Prepare stencils and screens for textile printing 60

MSTTD4003 Produce woven textile samples 80

MSTTD4004 Produce woven tapestry samples 80

MSTTD4005 Produce screen printed textiles 80

Page 14


MSTTD4006 Source textile materials and resources 20

MSTTD4007 Analyse textile design influences 100

MSTTD4008 Present and promote textile design concepts 50

MSTTD4009 Assist in the development of textile designs 50

MSTTD4010 Apply manipulation techniques to create experimental textile samples 60

MSTTD4011 Estimate costs for development of textile designs 20

MSTTD4012 Analyse use of colour in textiles 30

MSTTD5001 Design and produce knitted textile products 120

MSTTD5002 Design and produce woven tapestry products 120

MSTTD5003 Design and produce woven products 120

MSTTD5004 Design and produce experimental textiles 120

MSTTD5005 Design and produce printed textiles 120

MSTTD5006 Exhibit textile designs or products 50

MSTTD5007 Develop textile designs using computer-based design programs 100

MSTTD5008 Develop textile designs and specifications 60

MSTTD5009 Produce printed designs on woven and non-woven substrates 120

MSTTD5010 Produce computer-aided textile design folios 100

MSTTD6001 Research commercial development of textiles 80

MSTTD6002 Apply electronic systems to textile design and production 80

MSTTD6003 Develop a textile product range 60

MSTTD6004 Create and produce textile designs for commercial production 100

MSTTF2001 Despatch products 20

MSTTF2002 Cut, bend and shape metal 60

MSTTF2003 Use canvas and sail production tools 20

MSTTF2004 Add reinforcements and attachments 40

MSTTF2005 Translate information into measurements or diagrams 50

MSTTF2006 Measure and scale geometric shapes 50

MSTTF2007 Produce patterns for 2-D products 20

Page 15


MSTTF2008 Use adhesives 30

MSTTF2009 Identify and select canvas and sail materials 40

MSTTF2010 Lay out and mark out canvas or sail materials 60

MSTTF2011 Cut and shape canvas or sail materials 40

MSTTF2012 Stitch by hand 40

MSTTF2013 Waterproof canvas products 20

MSTTF2014 Weld plastic materials 40

MSTTF2015 Install products on and off site 40

MSTTF2016 Inspect canvas or sail product 40

MSTTF3001 Identify client and site requirements for installation of fabricated textile products 20

MSTTF3002 Gain customer acceptance of service proposal 40

MSTTF3003 Produce patterns for 3-D products 40

MSTTF3004 Perform advanced welding of plastic materials 40

MSTTF3005 Apply lofting skills to sail making 60

MSTTF3006 Cut and join sail panels 60

MSTTF3007 Manufacture textile structures 90

MSTTN2001 Set up and operate a dry laid web forming machine 50

MSTTN2002 Set up and operate a spun bond web forming machine 50

MSTTN2003 Use basic recognition techniques to identify technical and non-woven textiles 40

MSTTN2004 Undertake web bonding processes 50

MSTTN2005 Undertake web conversion and finishing 50

MSTTN2006 Identify purpose and performance outcomes of technical textile product 40

MSTTN2007 Conduct technical textile mechanical finishing processes 50

MSTTN2008 Conduct heat setting on technical textiles 50

MSTTN2009 Apply surface coating to technical textiles 50

MSTTN2010 Apply laminations or fusible interlinings to technical textiles 50

MSTTN2011 Undertake fibre blending and feeding for non-woven technical production processes 50

MSTTX1001 Produce a simple textile fabric or product 40

Page 16


MSTTX2001 Perform knitting operations 50

MSTTX2002 Weigh and check textile materials and products 20

MSTTX2003 Repair textile product 60

MSTTX2004 Conduct packaging or folding for textile production 50

MSTTX2005 Access and use information resources for textile production operations 30

MSTTX2006 Undertake carding operations 50

MSTTX2007 Operate a machine for intermediate production support 45

MSTTX2008 Operate a machine for complex production operations 45

MSTTX2009 Perform industrial sewing on textile products 50

MSTTX3001 Identify quality and types of textile fibres, yarns and fabrics 50

MSTTX3002 Contribute to textile production process improvements 40

MSTTX3003 Set up, adjust and maintain industrial sewing machines 50

MSTTX3004 Set up textile production machines for product change 60

MSTTX3005 Organise and interpret tests 60

MSTTX3006 Ensure efficient operation of textile machines 40

MSTTX3007 Prepare dyes for textile production 50

MSTTX3008 Select raw materials 40

MSTTX3009 Operate in a complex textile production environment 50

MSTTX3010 Monitor textile production processes 40

MSTTX3011 Set up, adjust and monitor a machine for TCF production 50

MSTTX3012 Identify and deal with mechanical and low voltage electrical faults in textile machinery 45

MSTTX4001 Interpret and apply textile calculations and specifications 50

MSTTX4002 Understand and apply textile science 50

MSTTX4003 Perform routine textile testing and analyse results 70

MSTTX4004 Select dyes and develop dye specification and recipe for production 60

MSTTX4005 Undertake textile colouration and finishing 60

MSTTX5001 Determine textile finishing processes 70

Page 17


Mapping Qualifications

The following table provides an overview of the qualifications from Version 1.00 which replace qualifications from the existing version of the LMT07 Textiles, Clothing and Footwear Training Package.

LMT07 Current Qualification MST Replacement Qualification

National Code

National Title Nominal Hours

E / NE

National Code


LMT20907 Certificate II in Footwear Production (Intermediate) 400 NE

MST20116 Certificate II in TCF Production Support 417

LMT20707 Certificate II in Clothing Production (Complex or Multiple Processes)

340 NE

LMT20507 Certificate II in Textile Fabrication 440 NE

LMT21607 Certificate II in Technical Textiles and Non-wovens 420 NE

LMT20607 Certificate II in Clothing Production (Intermediate) 600 NE

LMT20107 Certificate II in Textile Production (Intermediate) 410 NE

LMT21607 Certificate II in Technical Textiles and Non-wovens 420 NE

MST20216 Certificate II in TCF Production Operations 472

LMT21007 Certificate II in Footwear Production (Complex or Multiple Processes)

510 NE

LMT20507 Certificate II in Textile Fabrication 440 NE

LMT20207 Certificate II in Textile Production (Complex or Multiple Processes)

490 NE

LMT20707 Certificate II in Clothing Production (Complex or Multiple Processes)

340 NE

LMT21207 Certificate II in Leather Production 590 E MST20316 Certificate II in Leather Production 590

LMT21410 Certificate II in Laundry Operations 580 E MST20416 Certificate II in Laundry Operations 580

LMT21107 Certificate II in Footwear Repair 400 NE MST20516 Certificate II in TCF Services and Repair 485

LMT21510 Certificate II in Dry Cleaning Operations 770 NE

LMT21707 Certificate II in Applied Fashion Design and Technology 355 E MST20616 Certificate II in Applied Fashion Design and Technology 451

LMT20807 Certificate II in Millinery 0 E

LMT30107 Certificate III in Textile Production 720 NE

MST30116 Certificate III in Clothing and Textile Production 652 LMT30507 Certificate III in Clothing Production 625 NE

LMT31807 Certificate III in Technical Textiles and Non-wovens 720 NE

Page 18


LMT30407 Certificate III in Textile Fabrication 690 E MST30216 Certificate III in Manufactured Textile Products 868

LMT30607 Certificate III in Millinery 0 E MST30316 Certificate III in Millinery 612

LMT30707 Certificate III in Footwear Production 850 NE MST30416 Certificate III in Footwear 712

LMT30807 Certificate III in Footwear Repair 678 NE

LMT30907 Certificate III in Leather Production 930 E MST30516 Certificate III in Leather Production 930

LMT31110 Certificate III in Laundry Operations 920 E MST30616 Certificate III in Laundry Operations 920

LMT31210 Certificate III in Dry Cleaning Operations 1160 E MST30716 Certificate III in Dry Cleaning Operations 1160

LMT31407 Certificate III in Applied Fashion Design and Technology 835 E MST30816 Certificate III in Applied Fashion Design and Technology 835

LMT40107 Certificate IV in Textile Technology and Production 1237 E MST40116 Certificate IV in Textile Design, Development and Production 1174

LMT41107 Certificate IV in Textile Design and Development 1220 E

LMT40307 Certificate IV in Clothing Production 1060 E MST40216 Certificate IV in Clothing Production 1060

LMT40407 Certificate IV in Custom-made Footwear 1330 E MST40316 Certificate IV in Custom-Made Footwear 1330

LMT40707 Certificate IV in Millinery 0 E MST40416 Certificate IV in Millinery 986

LMT41207 Certificate IV in Fashion and Textiles Merchandising 940 NE MST40516 Certificate IV in Applied Fashion Design and Merchandising 966

LMT41007 Certificate IV in Applied Fashion Design and Technology 880 NE

LMT50307 Diploma of Applied Fashion Design and Technology 1660 NE MST50116 Diploma of Applied Fashion Design and Merchandising 1576

LMT50607 Diploma of Fashion and Textiles Merchandising 1565 NE

LMT50507 Diploma of Textile Design and Development 2140 E MST50216 Diploma of Textile Design and Development 2140

LMT60507 Advanced Diploma of Fashion and Textiles Merchandising 2265 NE

MST60116 Advanced Diploma of Applied Fashion Design and Merchandising

2546 LMT60307

Advanced Diploma of Applied Fashion Design and Technology

2530 NE

LMT60407 Advanced Diploma of Textile Design and Development 2720 E MST60216 Advanced Diploma of Textile Design and Development 2720

Page 19


Mapping Units of Competency

The following table provides an overview of the units of competency from Version 1.00 which replace units of competency from the existing version of the LMT07 Textiles, Clothing and Footwear Training Package.

LMT07 Current Unit MST Replacement Unit

National Code


E / NE

National Code


LMTCL1001B Produce a simple garment 40 E MSTCL1001 Produce a simple garment 40

LMTCL2001B Use a sewing machine 30 E MSTCL2001 Use a sewing machine 30

LMTCL2002B Provide hand sewing and finishing support 20 E MSTCL2002 Provide hand sewing and finishing support 20

LMTCL2018B Perform basic maintenance of headwear 20 E MSTCL2003 Perform basic maintenance of headwear 20

LMTCL2004B Sew components 50 E MSTCL2004 Sew components 50

LMTCL2005B Use specialised machinery or processes to assist assembly production

30 E MSTCL2005

Use specialised machinery or processes to assist TCF production

30

LMTTX2014B Use specialised machinery to assist textile production 50 E

LMTCL2006B Press work 20 E MSTCL2006 Press work 20

LMTCL2007B Lay up, mark and cut uncomplicated fabrics and lays 20 E MSTCL2007 Lay up, mark and cut uncomplicated fabrics and lays 20

LMTCL2008B Finish garment production 20 E MSTCL2008 Finish garment production 20

LMTCL2009B Despatch work 10 E MSTCL2009 Despatch work 10

LMTCL2010B Modify patterns to create basic styles 50 E MSTCL2010 Modify patterns to create basic styles 50

LMTCL2011B Draw and interpret a basic sketch 25 E MSTCL2011 Draw and interpret a basic sketch 25

LMTCL2012B Organise and plan own work in a home-based production environment

50 E MSTCL2012 Organise and plan own work in a home-based production environment

50

LMTCL2013B Block and shape headwear by machine 30 E MSTCL2013 Block and shape headwear by machine 30

LMTCL2017B Access and use information resources for clothing production operations

20 E MSTCL2014 Access and use information resources for clothing production operations

20

LMTCL2015B Finish headwear 30 E MSTCL2015 Finish headwear 30

LMTCL2016B Trim headwear 40 E MSTCL2016 Trim headwear 40

- MSTCL2017 Press work for production support 35

- MSTCL2018 Perform bundling, ticketing and labelling in TCF operations 25

Page 20


- MSTCL2019 Sew components, complex tasks 65

- MSTCL2020 Lay up and mark uncomplicated fabrics and lays 45

LMTCL3001B Identify fabric performance and handling requirements 40 E MSTCL3001 Identify fabric performance and handling requirements 40

LMTCL3002B Prepare and produce sewn garment 60 E MSTCL3002 Prepare and produce a complex whole garment from specifications

60

LMTCL3003B Perform garment repairs and alterations 40 E MSTCL3003 Perform garment repairs and alterations 40

LMTCL3004B Press whole garments 20 E MSTCL3004 Press whole garments 20

LMTCL3005B Lay up and cut complicated fabrics and lays 30 E MSTCL3005 Lay up and cut complicated fabrics and lays 30

LMTCL3006B Assemble bra or swimwear 40 E MSTCL3006 Assemble bra or swimwear 40

LMTCL3007B Embellish garment by hand or machine 40 E MSTCL3007 Embellish garment by hand or machine 40

LMTCL3008B Set and produce digital embroidery 30 E MSTCL3008 Set and produce digital embroidery 30

LMTCL3009B Develop patterns from a block using basic patternmaking principles

50 E MSTCL3009 Develop patterns from a block using basic patternmaking principles

50

LMTCL3010B Sew woven and stretch knit garments 40 E MSTCL3010 Sew woven and stretch knit garments 40

LMTCL3011B Contribute to garment production process improvements 30 E MSTCL3011 Contribute to garment production process improvements 30

LMTCL3012B Make marker for complicated fabrics and lays 40 E MSTCL3012 Make marker for complicated fabrics and lays 40

LMTCL3013B Interpret patterns and apply pattern information 30 E MSTCL3013 Interpret patterns and apply pattern information 30

LMTCL3014B Interact and communicate with garment production personnel

20 E MSTCL3014 Interact and communicate with garment production personnel 20

LMTCL4001A Perform sample machining of bespoke garments 115 E MSTCL4001 Perform sample machining of advanced construction garments

115

LMTCL4002A Assemble and fit commercially tailored or bespoke garments

80 E MSTCL4002 Assemble and fit commercially tailored or bespoke garments 80

LMTCL4003A Measure, lay-up and cut custom-made garments 120 E MSTCL4003 Measure, lay up and cut custom-made garments 120

LMTCL4004A Determine and perform garment maintenance or repair 30 E MSTCL4004 Determine and perform garment maintenance or repair 30

LMTDC2001A Provide customer service in a dry cleaning or laundry enterprise

50 E MSTDC2001 Provide customer service in a dry cleaning or laundry enterprise

50

LMTDC2012A Conduct safe handling of dry cleaning chemicals and solvents

60 E MSTDC2002 Conduct safe handling of dry cleaning chemicals and solvents 60

LMTDC2011A Identify pre- and post-spotting requirements 85 E MSTDC2003 Identify pre- and post-spotting requirements 85

LMTDC2004A Operate dry cleaning machines 140 E MSTDC2004 Operate dry cleaning machines 140

Page 21


LMTDC2005A Operate wet cleaning machines 60 E MSTDC2005 Operate wet cleaning machines 60

LMTDC2006A Operate finishing equipment 135 E MSTDC2006 Operate finishing equipment 135

LMTDC2007A Receive and sort articles for cleaning 60 E MSTDC2007 Receive and sort articles for cleaning 60

LMTDC2008A Carry out final inspection of articles 60 E MSTDC2008 Carry out final inspection of articles 60

LMTDC2010A Identify fabric and garment cleaning requirements 60 E MSTDC2009 Identify fabric and garment cleaning requirements 60

LMTDC3003A Perform spotting function in dry cleaning operations 60 E MSTDC3001 Perform spotting function in dry cleaning operations 60

LMTDC3002A Dry clean garments with special treatment requirements 40 E MSTDC3002 Dry clean garments with special treatment requirements 40

LMTDE3001A Apply hooping and fabric handling techniques 20 E MSTDE3001 Apply hooping and fabric handling techniques 20

LMTDE3002A Digitise artwork for computerised embroideries 25 E MSTDE3002 Digitise artwork for computerised embroideries 25

LMTDE3003A Apply advanced digitising techniques to produce computerised embroideries

30 E MSTDE3003 Apply advanced digitising techniques to produce computerised embroideries

30

LMTDE3004A Generate artwork for computerised embroideries 25 E MSTDE3004 Generate artwork for computerised embroideries 25

LMTDE3005A Replicate traditional hand craft techniques 40 E MSTDE3005 Replicate traditional hand craft techniques 40

LMTDE3006A Digitise text to produce embroidered lettering 25 E MSTDE3006 Digitise text to produce embroidered lettering 25

LMTDE3007A Demonstrate features of digitised embroidery machines 15 E MSTDE3007 Demonstrate features of digitised embroidery machines 15

LMTDE3008A Produce embroidery from digitised images 20 E MSTDE3008 Produce embroidery from digitised images 20

LMTDE3009A Maintain computerised embroidery machines 35 E MSTDE3009 Maintain computerised embroidery machines 35

LMTFD2001B Design and produce a simple garment 60 E MSTFD2001 Design and produce a simple garment 60

LMTFD2002B Apply printing techniques to produce indigenous textile designs

80 E MSTFD2002 Apply printing techniques to produce Indigenous textile designs

80

LMTFD2003B Apply dyeing techniques to produce indigenous textile designs

80 E MSTFD2003 Apply dyeing techniques to produce Indigenous textile designs

80

LMTFD2004B Work within an indigenous cultural framework 40 E MSTFD2004 Work within an Indigenous cultural framework 40

LMTFD2005B Identify design process for fashion designs 30 E MSTFD2005 Identify design process for fashion designs 30

- MSTFD2006 Use a sewing machine for fashion design 70

LMTFD3001B Market design product to local outlets 30 E MSTFD3001 Market design product to local outlets 30

LMTFD3002B Design and produce indigenous printed textiles to a brief 80 E MSTFD3002 Design and produce indigenous printed textiles to a brief 80

LMTFD3003B Prepare design concept for a simple garment 40 E MSTFD3003 Prepare design concept for a simple garment 40

LMTFD3004B Draw a trade drawing for fashion design 30 E MSTFD3004 Draw a trade drawing for fashion design 30

Page 22


LMTML3005A Use skin, fur or leather in millinery products 40 E MSTFD3005 Use skin, fur or leather to create fashion or textile products 40

LMTFD4001B Apply design studio process 60 E MSTFD4001 Apply design studio process 60

LMTFD4002B Apply principles of colour theory to fashion design development

25 E MSTFD4002 Apply principles of colour theory to fashion design development

25

LMTFD4003B Assist in preparation of preliminary design concepts 50 E MSTFD4003 Assist in preparation of preliminary design concepts 50

LMTFD4004B Calculate cost estimates for fashion products 20 E MSTFD4004 Calculate cost estimates for fashion products 20

LMTFD4005B Communicate and sell design concepts 30 E MSTFD4005 Communicate and sell design concepts 30

LMTFD4006B Interact and network with fashion industry participants 60 E MSTFD4006 Interact and network with fashion industry participants 60

LMTFD4007B Conduct quality assurance for patterns and garments 30 E MSTFD4007 Conduct quality assurance for patterns and garments 30

LMTFD4008B Construct stock size block for garment to meet size and fit specifications

40 E MSTFD4008 Construct stock size block for garment to meet size and fit specifications

40

LMTFD4009B Create and edit digital embroidery designs 20 E MSTFD4009 Create and edit digital embroidery designs 20

LMTFD4010B Create pattern to meet design specifications applying advanced pattern-making principles

80 E MSTFD4010 Create pattern to meet design specifications applying advanced patternmaking principles

80

LMTFD4011B Cut fabrics for prototype designs 20 E MSTFD4011 Cut fabrics for prototype designs 20

LMTFD4012B Develop product specifications for fashion design 20 E MSTFD4012 Develop product specifications for fashion design 20

LMTFD4013B Grade 2D patterns 80 E MSTFD4013 Grade 2-D patterns 80

LMTFD4014B Identify influences on contemporary fashion designs and construction techniques

30 E MSTFD4014 Identify influences on contemporary fashion designs and construction techniques

30

LMTFD4015B Create pattern from block to meet customer specifications 50 E MSTFD4015 Create pattern from block to meet customer specifications 50

LMTFD4016B Sew design prototypes 60 E MSTFD4016 Sew design prototypes 60

LMTFD4017B Source materials and resources for production of fashion designs

30 E MSTFD4017 Source materials and resources for production of fashion designs

30

LMTFD4018B Use and apply sizing systems appropriate for fashion design

20 E MSTFD4018 Use and apply sizing systems appropriate for fashion design 20

LMTFD4019B Use colourisation techniques on fabrics 30 E MSTFD4019 Use colourisation techniques on fabrics 30

LMTFD4020B Use electronic fashion design tools 40 E MSTFD4020 Use electronic fashion design tools 40

LMTFD4021B Drape fabrics to make patterns 40 E MSTFD4021 Drape fabrics to make patterns 40

LMTFD5001B Design bras and swimwear 30 E MSTFD5001 Design bras and swimwear 30

LMTFD5002B Develop and test patterns for bras and swimwear 50 E MSTFD5002 Develop and test patterns for bras and swimwear 50

LMTFD5003B Analyse fit model 40 E MSTFD5003 Analyse fit model 40

Page 23


LMTFD5004B Develop marketing plans for fashion products 50 E MSTFD5004 Develop marketing plans for fashion products 50

LMTFD5005B Manipulate fabrics to create new finishes 60 E MSTFD5005 Manipulate fabrics to create new finishes 60

LMTFD5006B Evaluate fashion designs against set criteria 30 E MSTFD5006 Evaluate fashion designs against set criteria 30

LMTFD5007B Analyse influences on contemporary fashion designs 50 E MSTFD5007 Analyse influences on contemporary fashion designs 50

LMTFD5008B Conduct fashion design purchasing 40 E MSTFD5008 Conduct fashion design purchasing 40

LMTFD5009B Cost design production 40 E MSTFD5009 Cost production of fashion or textile designs 40

LMTFD5010B Develop and present design concepts within specific guidelines

60 E MSTFD5010 Develop and present design concepts within specific guidelines

60

LMTFD5011B Produce fashion illustrations 70 E MSTFD5011 Produce fashion illustrations to assist product visualisation 70

LMTFD5012B Perform contour draping 50 E MSTFD5012 Perform contour draping 50

LMTFD5013B Develop merchandising plans for fashion products 40 E MSTFD5013 Develop merchandising plans for fashion products 40

LMTFD5014B Construct complex blocks for fashion garments 100 E MSTFD5014 Construct complex blocks for fashion garments 100

LMTFD5015B Develop patterns for complex fashion garments 90 E MSTFD5015 Develop patterns for complex fashion garments 90

LMTFD5016B Grade shaped patterns 60 E MSTFD5016 Grade complex patterns 60

LMTFD5017B Apply design studio processes to meet client brief 90 E MSTFD5017 Apply design studio processes to meet client brief 90

LMTFD5018B Determine and specify advanced construction processes 90 E MSTFD5018 Determine and specify advanced construction processes 90

LMTFD5019B Analyse individual fit and make pattern alterations 100 E MSTFD5019 Analyse individual fit and make pattern alterations 100

- MSTFD5020 Assess impact of current fashion industry innovations and practices

90

- MSTFD5021 Conduct digital patternmaking and grading 135

- MSTFD5022 Develop digital costing markers 115

LMTFD6001B Evaluate commercial viability of designs 60 E MSTFD6001 Evaluate commercial viability of designs 60

LMTFD6002B Manage product development of fashion designs 60 E MSTFD6002 Manage product development of fashion designs 60

LMTFD6003B Manage fashion design process 80 E MSTFD6003 Manage fashion design process 80

LMTFD6004B Manage advanced pattern making processes 90 E MSTFD6004 Manage advanced patternmaking processes 90

LMTFD6005B Drape structured over-garments 80 E MSTFD6005 Drape structured over-garments 80

LMTFD6006B Develop a fashion range 90 E MSTFD6006 Develop a fashion range 90

LMTFD6007B Implement specialised pattern-making technologies 100 E MSTFD6007 Implement specialised patternmaking technologies 100

LMTFD6008B Apply studio processes to create and produce designs for 90 E MSTFD6008 Apply studio processes to create and produce designs for 90

Page 24


commercial production commercial production

LMTFD6009B Analyse fashion industry textiles to guide commercial development

60 E MSTFD6009 Analyse fashion industry textiles to guide commercial development

60

LMTFP1001B Embellish footwear 80 E MSTFP1001 Embellish footwear 80

LMTFP2001B Identify materials used in footwear production 50 E MSTFP2001 Identify materials used in footwear production 50

LMTFP2002B Perform stuff cutting 40 E MSTFP2002 Perform stuff cutting 40

LMTFP2003B Cut printed materials by machine 40 E MSTFP2003 Cut printed materials by machine 40

LMTFP2004B Cut non-printed leather by machine 40 E MSTFP2004 Cut non-printed leather by machine 40

LMTFP2005B Operate machine to sew upper 40 E MSTFP2005 Operate machine to sew upper 40

LMTFP2006B Machine upper according to product requirements 50 E MSTFP2006 Machine upper according to product requirements 50

LMTFP2007B Last shoe by machine 60 E MSTFP2007 Last shoe by machine 60

LMTFP2008B Perform moulding operations 50 E MSTFP2008 Perform moulding operations 50

LMTFP2009B Perform footwear finishing operations 60 E MSTFP2009 Perform footwear finishing operations 60

LMTFP2010B Repair footwear product 60 E MSTFP2010 Repair footwear product 60

LMTFP2011B Perform table-based operations 50 E MSTFP2011 Perform table-based operations 50

LMTFP3001B Cut leather by hand 50 E MSTFP3001 Cut leather by hand 50

LMTFP3002B Hand last shoe 60 E MSTFP3002 Hand last shoe 60

LMTFP3003B Assemble shoe by hand 60 E MSTFP3003 Assemble shoe by hand 60

LMTFP3004B Contribute to footwear production improvement processes 70 E MSTFP3004 Contribute to footwear production improvement processes 70

LMTFP3005B Supervise footwear production operations 70 E MSTFP3005 Supervise footwear production operations 70

LMTFP3006B Apply foot anatomy principles to footwear production 80 E MSTFP3006 Apply foot anatomy principles to footwear production 80

LMTFP4001A Develop design for custom made footwear 80 E MSTFP4001 Develop design for custom-made footwear 80

LMTFP4002A Make patterns for custom-made footwear 80 E MSTFP4002 Make patterns for custom-made footwear 80

LMTFP4003A Prepare, cut and sew custom-made shoe components 80 E MSTFP4003 Prepare, cut and sew custom-made shoe components 80

LMTFP4004A Assemble and finish custom-made shoe 80 E MSTFP4004 Assemble and finish custom-made shoe 80

LMTFP4005A Fit custom-made footwear 80 E MSTFP4005 Fit custom-made footwear 80

LMTFR2001A Assess and cost footwear repair job 20 E MSTFR2001 Assess and cost footwear repair job 20

LMTFR2002A Supply and fit new heel block 40 E MSTFR2002 Supply and fit new heel block 40

Page 25


LMTFR2003A Attach non-slip sole or heel top piece 20 E MSTFR2003 Attach non-slip sole or heel top piece 20

LMTFR2004A Replace half leather sole 40 E MSTFR2004 Replace half leather sole 40

LMTFR2005A Sew or patch by machine 30 E MSTFR2005 Sew or patch by machine 30

LMTFR3001A Replace full sole and heel 40 E MSTFR3001 Replace full sole and heel 40

LMTFR3002A Operate sole stitcher 40 E MSTFR3002 Operate sole stitcher 40

LMTFR3003A Hand sew welt 40 E MSTFR3003 Hand sew welt 40

LMTFR3004A Re-cover footwear 40 E MSTFR3004 Re-cover footwear 40

LMTFR3005A Dye footwear or leather product 30 E MSTFR3005 Dye footwear or leather product 30

LMTFR3006A Undertake specialised footwear repair techniques 50 E MSTFR3006 Undertake specialised footwear repair techniques 50

LMTML2006A Use millinery steaming and pressing equipment 20 E MSTGN2001 Use steaming and pressing equipment in TCF production 20

LMTDC2009A Prepare articles for storage or despatch 40 NE MSTGN2002 Package and handle TCF items for storage or despatch 20

LMTCL2014B Pack, store, handle and despatch headwear 20 NE MSTGN2002 Package and handle TCF items for storage or despatch 20

LMTTF2003A Package and handle products for despatch 30 NE

LMTGN2003B Work in the Textiles, Clothing and Footwear industry 40 E MSTGN2003 Work in the TCF industry 40

LMTGN2004B Work in a team environment 30 E MSTGN2004 Work in a team environment 30

LMTGN2005B Perform minor maintenance 40 E MSTGN2005 Perform minor maintenance 40

LMTGN2006B Perform test or inspection to check product quality 40 E MSTGN2006 Perform test or inspection to check product quality 40

LMTGN2007B Select, transfer and remove materials and products 40 E MSTGN2007 Select, transfer and remove materials and products 40

LMTGN2008B Coordinate work of team or section 30 E MSTGN2008 Coordinate work of team or section 30

LMTGN2009B Operate computing technology in a textiles, clothing and footwear workplace

20 E MSTGN2009 Operate computing technology in a TCF workplace 20

LMTGN2010B Perform tasks to support production 30 E MSTGN2010 Perform tasks to support production 30

LMTTX2001B Identify fibres, yarns and textile materials and their uses in textile production

50 NE MSTGN2011 Identify fibres, fabrics and textiles used in the TCF industry 70

LMTCL2003B Identify fibres and fabrics 40 NE

LMTHL2004A Prepare chemicals to a formula 40 NE

MSTGN2012 Work safely with chemicals in TCF operations 50 LMTLA2001A Conduct safe handling of laundry chemicals 60 NE

LMTTX2015B Handle and prepare chemicals, dyes and other substances used in textile production

50 NE

Page 26


LMTGN3001B Control production in a section of a textiles, clothing and footwear enterprise

60 E MSTGN3001 Control production in a section of a TCF enterprise 60

LMTGN3002B Organise and plan own work to achieve planned outcomes

30 E MSTGN3002 Organise and plan own work to achieve planned outcomes 30

LMTGN3003B Estimate and cost job 50 E MSTGN3003 Estimate and cost job 50

LMTGN3009B Supervise operations in a textiles, clothing and footwear enterprise

50 E MSTGN3004 Supervise operations in a TCF enterprise 50

LMTGN3005B Plan tasks to assist production operations 80 E MSTGN3005 Plan tasks to assist production operations 80

LMTGN3008A Draw 3D designs 60 E MSTGN3006 Draw 3-D designs 60

LMTGN3007B Monitor and operate trade waste 60 E MSTGN3007 Monitor and operate trade waste 60

LMTGN4009A Set and modify machines for product change 60 E

MSTGN4001 Coordinate or set up machines for product change 60 LMTLA4002A Program and monitor commercial laundry machine control systems

50 NE

LMTGN4001A Coordinate or set up machines for product change 60 E

LMTGN4002A Participate in product engineering 80 E MSTGN4002 Participate in product engineering 80

LMTGN4003A Install and commission process and machine control programs

60 E MSTGN4003 Install and commission process and machine control programs

60

LMTGN4019A Analyse textiles, clothing and footwear merchandising and marketing principles

60 E MSTGN4004 Analyse TCF merchandising and marketing principles 60

LMTGN4005A Plan and implement production within a work area 50 E MSTGN4005 Plan and implement production within a work area 50

LMTGN4018A Apply textile clothing and footwear market supply systems 60 E MSTGN4006 Apply TCF market supply systems 60

LMTGN4016A Contribute to the development of products or processes 100 E MSTGN4007 Contribute to the development of products or processes 100

LMTGN4008A Analyse product and determine machine settings 50 E MSTGN4008 Analyse product and determine machine settings 50

LMTGN4014A Design production tooling 60 E MSTGN4009 Design production tooling 60

LMTGN4010A Implement and monitor OHS in the workplace 60 E MSTGN4010 Implement and monitor WHS and environmental systems in the workplace

60

LMTLA4001A Monitor compliance with industry standards and regulations

50 NE MSTGN4011 Coordinate the quality system and procedures 45

LMTGN4011A Coordinate the quality system and procedures 100 E

LMTGN4012A Fabricate or machine tooling 50 E MSTGN4012 Fabricate or machine tooling 50

LMTGN4013A Manage technical processes 50 E MSTGN4013 Manage technical processes 50

LMTGN5001B Participate in production planning processes 60 E MSTGN5001 Participate in production planning processes 60

Page 27


LMTGN5002B Coordinate quality assurance for textiles clothing and footwear products and services

80 E MSTGN5002 Coordinate quality assurance for TCF products and services 80

LMTGN5003B Work with international textiles, clothing and footwear supply chains

40 E MSTGN5003 Work with international TCF supply chains 40

LMTGN5004A Manage installation and commissioning of equipment and systems

80 E MSTGN5004 Manage installation and commissioning of equipment and systems

80

LMTGN5005A Provide global operations support 100 E MSTGN5005 Provide global operations support 100

LMTGN5010A Plan and organise non-routine testing 100 E MSTGN5006 Plan and organise non-routine testing 100

LMTGN5007A Prepare procedures and specifications for textiles, clothing and footwear operations

60 E MSTGN5007 Prepare procedures and specifications for TCF operations 60

LMTGN5008A Identify opportunities in the textiles, clothing and footwear market

70 E MSTGN5008 Identify opportunities in the TCF market 70

LMTGN5011A Develop and test textile, clothing and footwear products or processes

80 E MSTGN5009 Develop and test TCF products or processes 80

LMTGN6001B Develop and implement a sales or marketing plan 60 E MSTGN6001 Develop and implement a sales or marketing strategy for fashion or textile items

60

LMTGN6002A Manage quality system and procedures 100 E MSTGN6002 Manage quality system and procedures 100

LMTGN6003B Research and evaluate processes and products 80 E MSTGN6003 Research and evaluate processes and products 80

LMTGN6004B Negotiate and manage contracts to produce finished design products

80 E MSTGN6004 Negotiate and manage contracts to produce finished design products

80

LMTGN6005A Manage production processes 100 E MSTGN6005 Manage production processes 100

LMTGN6006A Map and establish textiles, clothing or footwear supply chain process

80 E MSTGN6006 Map and establish TCF supply chain process 80

LMTHL2001A Undertake receival, storage, handling and preservation of materials or products

40 E MSTHL2001 Undertake receival, storage, handling and preservation of materials or products

40

LMTHL2002A Perform fellmongering processes 40 E MSTHL2002 Perform fellmongering processes 40

LMTHL2003A Operate machines to prepare hides or skins for tanning 60 E MSTHL2003 Operate machines to prepare hides or skins for tanning 60

LMTHL2012A Sort, grade or class hides, skins or leather 60 E MSTHL2004 Sort, grade or class hides, skins or leather 60

LMTHL2011A Trim hides, skins or leather 40 E MSTHL2005 Trim hides, skins or leather 40

LMTHL2006A Use drum or vessel to prepare or tan hides or skins 60 E MSTHL2006 Use drum or vessel to prepare or tan hides or skins 60

LMTHL2007A Operate machines to crust hides, skins or leather 60 E MSTHL2007 Operate machines to crust hides, skins or leather 60

LMTHL2008A Use drum or vessel to crust hides, skins or leather 60 E MSTHL2008 Use drum or vessel to crust hides, skins or leather 60

LMTHL2009A Perform drying operations 60 E MSTHL2009 Perform drying operations 60

Page 28


LMTHL2010A Finish hides, skins or leather 60 E MSTHL2010 Finish hides, skins or leather 60

LMTHL3001A Determine suitability of hide, skin and leather for leather goods

40 E MSTHL3001 Determine suitability of hide, skin and leather for leather goods

40

LMTHL3002A Determine tanning requirements for hide, skin and leather 40 E MSTHL3002 Determine tanning requirements for hide, skin and leather 40

LMTLA2011A Apply infection control policies and procedures in laundry operations

40 E MSTLA2001 Apply infection control policies and procedures in laundry operations

40

LMTLA2002A Operate washing machines 60 E MSTLA2002 Operate washing machines 60

LMTLA2003A Control washing extractor operation 60 E MSTLA2003 Control washing extractor operation 60

LMTLA2004A Perform linen rewash 40 E MSTLA2004 Perform linen rewash 40

LMTLA2005A Operate hydro extractor 40 E MSTLA2005 Operate hydro extractor 40

LMTLA2006A Perform conditioning and drying processes 40 E MSTLA2006 Perform conditioning and drying processes 40

LMTLA2007A Finish products for despatch 30 E MSTLA2007 Finish products for despatch 30

LMTLA2008A Repair damaged laundry items 40 E MSTLA2008 Repair damaged laundry items 40

LMTLA2009A Inspect, fold and pack theatre linen 65 E MSTLA2009 Inspect, fold and pack theatre linen 65

LMTLA2010A Prepare products for storage or despatch 60 E MSTLA2010 Prepare products for storage or despatch 60

LMTLA3001A Perform advanced laundry operations 60 E MSTLA3001 Perform advanced laundry operations 60

LMTLA3002A Determine linen rental requirements 50 E MSTLA3002 Determine linen rental requirements 50

LMTLG2001A Cut by machine 60 E MSTLG2001 Cut by machine 60

LMTLG2002A Sew leather by machine 80 E MSTLG2002 Sew leather by machine 80

LMTLG2003A Perform table work 70 E MSTLG2003 Perform table work 70

LMTLG2004A Operate leather production machines 70 E MSTLG2004 Operate leather production machines 70

LMTLG2005A Split leather pieces 40 E MSTLG2005 Split leather pieces 40

LMTLG2006A Identify materials used in leather goods production 60 E MSTLG2006 Identify materials used in leather goods production 60

LMTLG2000A Skive leather pieces 60 E MSTLG2007 Skive leather pieces 60

LMTLG3001A Make a prototype 60 E MSTLG3001 Make a prototype 60

LMTLG3002A Cut leather by hand 70 E MSTLG3002 Cut leather by hand 70

LMTLG3003A Sew leather by hand 80 E MSTLG3003 Sew leather by hand 80

LMTLG3004A Apply finishes to leather products 60 E MSTLG3004 Apply finishes to leather products 60

LMTLG3005A Grade leather 60 E MSTLG3005 Grade leather 60

Page 29


LMTLG3006A Apply pattern specifications to saddlery products 150 E MSTLG3006 Apply pattern specifications to saddlery products 150

LMTLG3007A Assemble saddle components 200 E MSTLG3007 Assemble saddle components 200

LMTMF4001A Select and adjust pre-fabricated footwear-related orthoses 60 E MSTMF4001 Select and adjust prefabricated footwear-related orthoses 60

LMTMF4002A Conduct medical grade footwear assessments for clients with footwear-related medical conditions

80 E MSTMF4002 Conduct medical grade footwear assessments for clients with footwear-related medical conditions

80

LMTMF4003A Modify medical grade footwear 30 E MSTMF4003 Modify medical grade footwear 30

LMTMF4004A Select and adjust pre-fabricated medical grade footwear and accessories

30 E MSTMF4004 Select and adjust prefabricated medical grade footwear and accessories

30

LMTML1001A Make a simple headpiece 40 E MSTML1001 Make a simple headpiece 40

LMTML2001A Identify materials used in millinery 40 E MSTML2001 Identify materials used in millinery 40

LMTML2002A Make flat patterns for millinery 20 E MSTML2002 Make flat patterns for millinery 20

LMTML2003A Produce and attach millinery trims 30 E MSTML2003 Produce and attach millinery trims 30

LMTML2004A Produce felt for millinery 50 E MSTML2004 Produce felt for millinery 50

LMTML2005A Place and cut millinery patterns 20 E MSTML2005 Place and cut millinery patterns 20

LMTML2010A Make millinery with flat pattern components 20 E MSTML2006 Make millinery with flat pattern components 20

LMTML2007A Block and shape millinery by hand 30 E MSTML2007 Block and shape millinery by hand 30

LMTML2008A Assemble simple blocked millinery components 90 E MSTML2008 Assemble simple blocked millinery components 90

LMTML2009A Apply millinery sewing and adhesion techniques 30 E MSTML2009 Apply millinery sewing and adhesion techniques 30

LMTML3001A Make flat patterns from hat blocks 40 E MSTML3001 Make flat patterns from hat blocks 40

LMTML3002A Block and shape complex millinery 80 E MSTML3002 Block and shape complex millinery 80

LMTML3003A Make millinery using patterns derived from hat block 40 E MSTML3003 Make millinery using patterns derived from hat block 40

LMTML3004A Identify performance and handling requirements of millinery materials

30 E MSTML3004 Identify performance and handling requirements of millinery materials

30

LMTML3006A Assemble complex blocked millinery components 90 E MSTML3005 Assemble complex blocked millinery components 90

LMTML4001A Undertake specific millinery construction techniques 120 E MSTML4001 Undertake specific millinery construction techniques 120

LMTML4002A Rejuvenate millinery 50 E MSTML4002 Rejuvenate millinery 50

LMTML4003A Present and display millinery 15 E MSTML4003 Present and display millinery 15

LMTML4004A Manage millinery procurement and cost millinery products 30 E MSTML4004 Manage millinery procurement and cost millinery products 30

LMTML4005A Undertake initial millinery consultation, subsequent fittings and finishing

40 E MSTML4005 Undertake initial millinery consultation, subsequent fittings and finishing

40

Page 30


LMTML4006A Sketch and prepare millinery fashion designs 40 E MSTML4006 Sketch and prepare millinery fashion designs 40

LMTML4007A Make millinery patterns 40 E MSTML4007 Make millinery patterns 40

LMTML4008A Undertake couture millinery 90 E MSTML4008 Undertake couture millinery 90

LMTML4009A Modify millinery blocks to make new shapes 40 E MSTML4009 Modify millinery blocks to make new shapes 40

LMTML4010A Make couture trims 40 E MSTML4010 Make couture trims 40

LMTTD4001A Produce knitted textile samples 80 E MSTTD4001 Produce knitted textile samples 80

LMTTD4013A Prepare stencils and screens for textile printing 60 E MSTTD4002 Prepare stencils and screens for textile printing 60

LMTTD4003A Produce woven textile samples 80 E MSTTD4003 Produce woven textile samples 80

LMTTD4004A Produce woven tapestry samples 80 E MSTTD4004 Produce woven tapestry samples 80

LMTTD4005A Produce screen printed textiles 80 E MSTTD4005 Produce screen printed textiles 80

LMTTD4006A Source textile materials and resources 20 E MSTTD4006 Source textile materials and resources 20

LMTTD4007A Analyse textile design influences 100 E MSTTD4007 Analyse textile design influences 100

LMTTD4008A Present and promote textile design concepts 50 E MSTTD4008 Present and promote textile design concepts 50

LMTTD4009A Assist in the development of textile designs 50 E MSTTD4009 Assist in the development of textile designs 50

LMTTD4010A Apply manipulation techniques to create experimental textile samples

60 E MSTTD4010 Apply manipulation techniques to create experimental textile samples

60

LMTTD4011A Estimate costs for development of textile designs 20 E MSTTD4011 Estimate costs for development of textile designs 20

LMTTD4012A Analyse use of colour in textiles 30 E MSTTD4012 Analyse use of colour in textiles 30

LMTTD5001A Design and produce knitted textile products 120 E MSTTD5001 Design and produce knitted textile products 120

LMTTD5002A Design and produce woven tapestry products 120 E MSTTD5002 Design and produce woven tapestry products 120

LMTTD5003A Design and produce woven products 120 E MSTTD5003 Design and produce woven products 120

LMTTD5004A Design and produce experimental textiles 120 E MSTTD5004 Design and produce experimental textiles 120

LMTTD5005A Design and Produce printed textiles 120 E MSTTD5005 Design and produce printed textiles 120

LMTTD5006A Exhibit textile designs or products 50 E MSTTD5006 Exhibit textile designs or products 50

LMTTD5007A Develop textile designs using computer based design programs

100 E MSTTD5007 Develop textile designs using computer-based design programs

100

LMTTD5008A Develop textile designs and specifications 60 E MSTTD5008 Develop textile designs and specifications 60

LMTTD5011A Produce printed designs on woven and non-woven substrates

120 E MSTTD5009 Produce printed designs on woven and non-woven substrates 120

Page 31


LMTTD5010A Produce computer aided textile design folios 100 E MSTTD5010 Produce computer-aided textile design folios 100

LMTTD6001A Research commercial development of textiles 80 E MSTTD6001 Research commercial development of textiles 80

LMTTD6002A Apply electronic systems to textile design and production 80 E MSTTD6002 Apply electronic systems to textile design and production 80

LMTTD6003A Develop a textile product range 60 E MSTTD6003 Develop a textile product range 60

LMTTD6004A Create and produce textile designs for commercial production

100 E MSTTD6004 Create and produce textile designs for commercial production 100

LMTTF2001A Despatch products 20 E MSTTF2001 Despatch products 20

LMTTF2017A Cut, bend and shape metal 60 E MSTTF2002 Cut, bend and shape metal 60

LMTTF2018A Use canvas and sail production tools 20 E MSTTF2003 Use canvas and sail production tools 20

LMTTF2004A Add reinforcements and attachments 40 E MSTTF2004 Add reinforcements and attachments 40

LMTTF2005A Translate information into measurements or diagrams 50 E MSTTF2005 Translate information into measurements or diagrams 50

LMTTF2006A Measure and scale geometric shapes 50 E MSTTF2006 Measure and scale geometric shapes 50

LMTTF2007A Produce patterns for 2D products 20 E MSTTF2007 Produce patterns for 2-D products 20

LMTTF2008A Use adhesives 30 E MSTTF2008 Use adhesives 30

LMTTF2009A Identify and select canvas and sail materials 40 E MSTTF2009 Identify and select canvas and sail materials 40

LMTTF2010A Lay out and mark out canvas or sail materials 60 E MSTTF2010 Lay out and mark out canvas or sail materials 60

LMTTF2011A Cut and shape canvas or sail materials 40 E MSTTF2011 Cut and shape canvas or sail materials 40

LMTTF2012A Stitch by hand 40 E MSTTF2012 Stitch by hand 40

LMTTF2013A Waterproof canvas products 20 E MSTTF2013 Waterproof canvas products 20

LMTTF2014A Weld plastic materials 40 E MSTTF2014 Weld plastic materials 40

LMTTF2016A Install products on and off site 40 E MSTTF2015 Install products on and off site 40

LMTTF2019A Inspect canvas or sail product 40 E MSTTF2016 Inspect canvas or sail product 40

LMTTF3001A Identify customer requirements (on site) 20 E MSTTF3001 Identify client and site requirements for installation of fabricated textile products

20

LMTTF3002A Gain customer acceptance of service proposal 40 E MSTTF3002 Gain customer acceptance of service proposal 40

LMTTF3003A Produce patterns for 3D products 40 E MSTTF3003 Produce patterns for 3-D products 40

LMTTF3004A Perform advanced welding of plastic materials 40 E MSTTF3004 Perform advanced welding of plastic materials 40

LMTTF3005A Apply lofting skills to sail making 60 E MSTTF3005 Apply lofting skills to sail making 60

LMTTF3006A Cut and join sail panels 60 E MSTTF3006 Cut and join sail panels 60

Page 32


- MSTTF3007 Manufacture textile structures 90

LMTTN2001B Set up and operate a dry laid web forming machine 50 E MSTTN2001 Set up and operate a dry laid web forming machine 50

LMTTN2002B Set up and operate a spun bond web forming machine 50 E MSTTN2002 Set up and operate a spun bond web forming machine 50

LMTTN2003B Use basic recognition techniques to identify technical and non-woven textiles

40 E MSTTN2003 Use basic recognition techniques to identify technical and non-woven textiles

40

LMTTN2004B Undertake web bonding processes 50 E MSTTN2004 Undertake web bonding processes 50

LMTTN2005B Undertake web conversion and finishing 50 E MSTTN2005 Undertake web conversion and finishing 50

LMTTN2006B Identify purpose and performance outcomes of technical textile product

40 E MSTTN2006 Identify purpose and performance outcomes of technical textile product

40

LMTTN2007B Conduct technical textile mechanical finishing processes 50 E MSTTN2007 Conduct technical textile mechanical finishing processes 50

LMTTN2008B Conduct heat setting on technical textiles 50 E MSTTN2008 Conduct heat setting on technical textiles 50

LMTTN2009B Apply surface coating to technical textiles 50 E MSTTN2009 Apply surface coating to technical textiles 50

LMTTN2010B Apply laminations and fusible interlinings to technical textiles

50 E MSTTN2010 Apply laminations or fusible interlinings to technical textiles 50

LMTTN2011B Undertake fibre blending and feeding for nonwoven technical production processes

50 E MSTTN2011 Undertake fibre blending and feeding for non-woven technical production processes

50

LMTTX1001B Produce a simple textile fabric or product 40 E MSTTX1001 Produce a simple textile fabric or product 40

LMTTX2007B Perform knitting operations 50 E MSTTX2001 Perform knitting operations 50

LMTTX2009B Weigh and check textile materials and products 20 E MSTTX2002 Weigh and check textile materials and products 20

LMTTX2011B Repair textile product 60 E MSTTX2003 Repair textile product 60

LMTTX2013B Conduct packaging or folding for textile production 50 E MSTTX2004 Conduct packaging or folding for textile production 50

LMTTX2017B Access and use information resources for textile production operations

30 E MSTTX2005 Access and use information resources for textile production operations

30

LMTTX2019B Undertake carding operations 50 E MSTTX2006 Undertake carding operations 50

- MSTTX2007 Operate a machine for intermediate production support 45

LMTTX2016B Perform knotting for weaving operations 30 NE

MSTTX2008 Operate a machine for complex production operations 45

LMTTX2018B Restart machine after stoppage 60 NE

LMTTX2004B Perform tufting operations 50 NE

LMTTX2006B Operate a weaving loom 50 NE

LMTTX2005B Perform creeling operations 50 NE

Page 33


LMTTX2003B Perform spinning operations 50 NE

LMTTX2008B Apply finishing processes to textile production 50 NE

LMTTX2010B Load and operate dyeing equipment 40 NE

LMTTX2002B Prepare yarn for textile manufacturing 50 NE

LMTTX2012B Perform industrial sewing on textile products 50 E MSTTX2009 Perform industrial sewing on textile products 50

LMTTX3001B Identify quality and types of textile fibres, yarns and fabrics

50 E MSTTX3001 Identify quality and types of textile fibres, yarns and fabrics 50

LMTTX3002B Contribute to textile production process improvements 40 E MSTTX3002 Contribute to textile production process improvements 40

LMTTX3017A Set up, adjust and maintain industrial sewing machines 50 E MSTTX3003 Set up, adjust and maintain industrial sewing machines 50

LMTTX3004B Set up textile production machines for product change 60 E MSTTX3004 Set up textile production machines for product change 60

LMTTX3005B Organise and interpret tests 60 E MSTTX3005 Organise and interpret tests 60

LMTTX3006B Ensure efficient operation of textile machines 40 E MSTTX3006 Ensure efficient operation of textile machines 40

LMTTX3007B Prepare dyes for textile production 50 E MSTTX3007 Prepare dyes for textile production 50

LMTTX3008B Select raw materials 40 E MSTTX3008 Select raw materials 40

LMTTX3009B Operate in a complex textile production environment 50 E MSTTX3009 Operate in a complex textile production environment 50

LMTTX3010B Monitor textile production processes 40 E MSTTX3010 Monitor textile production processes 40

LMTTX3015A Set up, adjust and maintain tufting looms 50 NE

MSTTX3011 Set up, adjust and monitor a machine for TCF production 50

LMTTX3013A Set up, adjust and maintain spinning machines 50 NE

LMTTX3011A Set up, adjust and maintain circular knitting machines 50 NE

LMTTX3022A Set up and operate weaving looms for production 50 NE

LMTTX3016A Set up, adjust and maintain domestic sewing machines 50 NE

LMTTX3014A Set up, adjust and maintain carding machines 50 NE

LMTTX3021A Apply knowledge of weaving processes to production requirements

40 NE

LMTTX3012A Set up, adjust and maintain flat knitting machines 50 NE

LMTTX3020A Identify and correct weaving process faults 50 NE

LMTTX3019A Identify and correct mechanical faults in loom and other weaving equipment

50 NE MSTTX3012

Identify and deal with mechanical and low voltage electrical faults in textile machinery

45

LMTTX3018A Undertake electronic fault finding on textile machinery 50 NE

Page 34


LMTTX4001A Interpret and apply textile calculations and specifications 50 E MSTTX4001 Interpret and apply textile calculations and specifications 50

LMTTX4002A Understand and apply textile science 50 E MSTTX4002 Understand and apply textile science 50

LMTTX4003A Perform routine textile testing and analyse results 70 E MSTTX4003 Perform routine textile testing and analyse results 70

LMTTX4004A Select dyes and develop dye specification and recipe for production

60 E MSTTX4004 Select dyes and develop dye specification and recipe for production

60

LMTTX4005A Undertake textile colouration and finishing 60 E MSTTX4005 Undertake textile colouration and finishing 60

LMTTX5001A Determine textile finishing processes 70 E MSTTX5001 Determine textile finishing processes 70

Page 35


Traineeships

The following table provides a summary of the qualifications in the MST Textiles, Clothing and Footwear and the accredited traineeship courses they will replace.

LMT07 Current Unit MST Replacement Unit

National Code

National Title Traineeship Nominal Hours

E / NE

National Code


LMT20207 Certificate II in Textile Production (Complex or Multiple Processes)

TR01830: TEXTILE PRODUCTION (COMPLEX OR MULTIPLE PROCESSES) (LEVEL 2)

490 NE MST20216 Certificate II in TCF Production Operations 472

LMT21410 Certificate II in Laundry Operations TR09100: LAUNDRY OPERATIONS (LEVEL 2)

580 E MST20416 Certificate II in Laundry Operations 580

LMT21107 Certificate II in Footwear Repair TR05190: FOOTWEAR REPAIR (LEVEL 2)

400 NE

MST20516

Certificate II in TCF Services and Repair

485

LMT21510 Certificate II in Dry Cleaning Operations TR10490: DRY CLEANING OPERATIONS (LEVEL 2)

770 NE

LMT30107 Certificate III in Textile Production TR08000: TEXTILE PRODUCTION (LEVEL 3)

720 NE MST30116

Certificate III in Clothing and Textile Production

652

LMT30507 Certificate III in Clothing Production TR07970: CLOTHING PRODUCTION (LEVEL 3)

625 NE

LMT30407 Certificate III in Textile Fabrication TR01880: TEXTILE FABRICATION (LEVEL 3)

690 E MST30216 Certificate III in Manufactured Textile Products

868

LMT30807 Certificate III in Footwear Repair TR09120: FOOTWEAR REPAIR (LEVEL 3)

678 NE MST30416 Certificate III in Footwear 712

LMT30907 Certificate III in Leather Production TR09130: LEATHER PRODUCTION (LEVEL 3)

930 E MST30516 Certificate III in Leather Production 930

LMT31110 Certificate III in Laundry Operations TR09140: LAUNDRY OPERATIONS (LEVEL 3)

920 E MST30616 Certificate III in Laundry Operations 920

LMT31210 Certificate III in Dry Cleaning Operations TR10500: DRY CLEANING OPERATIONS (LEVEL 3)

1160 E MST30716 Certificate III in Dry Cleaning Operations 1160

LMT40307 Certificate IV in Clothing Production TR07980: CLOTHING PRODUCTION (LEVEL 4)

1060 E MST40216 Certificate IV in Clothing Production 1060

Documents

MST Textiles, clothing and footwear - nominal hours … National MST Textiles, Clothing and Footwear Training Package. This Guide is designed to aid Registered Training Organisations