Mounting an ISO via ILO3/4 Procedure Mounting an ISO as a Boot CD via ILO Modified Procedure Due to Changes in ILO3 and ILO4 Previous versions required a directory⁄share to access the ISO whereas ILO3 and ILO4 require a URL to access the ISO. 1> Environment Setup Working from the HSA, or any other non-essential device, we need to create⁄setup the World Wide Web services as our repository for the ISO images to be used and provide the URL that the ILO program will connect to later on. The ILO is looking for a repository with a URL format, thus the need to setup our web services first. a) Goto Add⁄Remove Programs - Component Services b) Select Internet Information Services (IIS) - Then select Details c) Next select World Wide Web service to activate web server service
Mounting an ISO as a Boot CD via ILO Modified Procedure Due to
Changes in ILO3 and ILO4 Previous versions required a
directoryshare to access the ISO whereas ILO3 and ILO4 require a
URL to access the ISO. 1> Environment Setup Working from the
HSA, or any other non-essential device, we need to createsetup the
World Wide Web services as our repository for the ISO images to be
used and provide the URL that the ILO program will connect to later
on. The ILO is looking for a repository with a URL format, thus the
need to setup our web services first. a) Goto AddRemove Programs -
Component Services b) Select Internet Information Services (IIS) -
Then select Details
c) Next select World Wide Web service to activate web server
service
d) Next select WWW service and details again and click OK to
add
e) Create a directory on the drive where you have enough space
for the ISOs and copy the ISOs to dir.
Example, I have three ISOs. Create the following: ex:
D:\WWW\3202_APPS\iso_name.iso ex: D:\WWW\3202_platform\iso_name.iso
ex: D:\WWW\CWEB\iso_name.iso
f) Next copy some support files over to your new WWW directory.
Files are located as shown below.
g) Next goto Control Panel, Administrative Tools and Select
Internet Information Services
h) Navigate to the "Default Web Site"
i) Right on the Default Web Site link and select properties
j) Below are all pics of the essential tabs and their settings
All the other tabs were left as default.
Note!!!
k) Once you have everything configured the way you want,
you need to stop and start the web service via right click
properties.
See step i) for pic
2> Now that we have our environment all setup, we can try to
mount the ISO from the ILO. a) Now connect to ILO port of the
machine you want to load. my ex: DAS164 10.16.33.36 It is assumed
you know how to connect to the ILO.
b) Navigate to the Virtual Media tab and complete the
following:
c) Once you have entered this information POWER OFF THE BOX from
the power management tab.
d) Go back to your WWW service and make sure it is still
running
