Upload
lamdien
View
288
Download
6
Embed Size (px)
Citation preview
Motorola Moto G3 TeardownHere comes with detailed steps to do Motorola Moto G3 whole teardown/disassembly.
撰写者: Witrigs
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 1 / 10 页
介绍介绍[video: https://www.youtube.com/watch?v=4039WGldia0]
工具工具:Heat Gun (1)
Suction Handle (1)
Guitar Picks (1)
T4 Torx Screwdriver (1)
Tweezers (1)
Spudger (1)
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 2 / 10 页
步骤步骤 1 — Motorola Moto G3 Teardown
Remove back cover.
Moto G3 plastic panel can be easily removed with the fingernails.
步骤步骤 2
Remove camera&flashlight metal cover. Use tweezers to cut strong adhesives underneath.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 3 / 10 页
步骤步骤 3
Undo 3 screws by T4 Torx screwdriver.
Take away plastic securing part.
步骤步骤 4
Heat up the LCD screen for a while.
Then with the help of suction cup, insert guitar picks to open a gap. Slide guitar picks or plasticopening tool to cut strong adhesives.
There is LCD screen connector on the left side, so be careful to slide guitar picks.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 4 / 10 页
步骤步骤 5
Release LCD screen connector firstly.
Remove LCD screen.
步骤步骤 6
Undo 14 screws by T4 Torx screwdriver
Pry up motherboard assembly.
Battery flex connector is connected with motherboard, so be careful to pry the assembly up.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 5 / 10 页
步骤步骤 7
Release battery flex connector.
Separate motherboard assembly from back cover assembly.
步骤步骤 8
Undo 3 screws here.
Use spudger to cut adhesives and pry the SIM&SD card reader board, then remove it.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 6 / 10 页
步骤步骤 9
Remove front-facing camera.
步骤步骤 10
Remove rear camera.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 7 / 10 页
步骤步骤 11
Remove earpiece.
步骤步骤 12
Remove loudspeaker.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 8 / 10 页
步骤步骤 13
Here is the motherboard.
步骤步骤 14
Use spudger to cut adhesive and pry the battery up.
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 9 / 10 页
此文档最后生成于 2017-12-23 12:11:03 AM。
步骤步骤 15
Take away headphone jack.
步骤步骤 16
Done
Motorola Moto G3 Teardown
© iFixit — CC BY-NC-SA zh.iFixit.com 10 / 10 页