Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Small but Strong
NDW
MPNDWMP
NDWMP
Motoriduttori CC combinati a magneti permanenti in neodimioNeodymium permanent magnets DC double reduction gearmotors
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G1
NDWMP
NDW
MP
Pag.Page
Indice IndexCaratteristiche tecniche Technical features G2Designazione Classification G2Versioni Versions G2Simbologia Symbols G2Lubrificazione Lubrication G3Carichi radiali Radial loads G3Rapporti Ratios G4Dati tecnici Technical data G5Dimensioni Dimensions G6Note Notes G10
0315A
Questa sezione annulla e sostituisce ogni precedente edizione o revi-sione. Qualora questa sezione non Vi sia giunta in distribuzione con-trollata, l’aggiornamento dei dati ivi contenuto non è assicurato. In tal caso la versione più aggiornata è disponibile sul nostro sito inter-net www.transtecno.com
This section replaces any previous edition and revision. If you obtained this catalogue other than through controlled distribution channels, the most up to date content is not guaranteed. In this case the latest ver-sion is available on our web site www.transtecno.com
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G2
NDWMP
MOTORIDUTTORE / GEARMOTOR
NDWMP 120/026/52 2 CD 90 405 240 BRTipoType
GrandezzaSize
Numero stadi epicicloidalePlanetary stages number
Versione RiduttoreGearbox Version
Flangia UscitaOutput flange
RapportoRatio
Versione MotoreMotor Version
OpzioniOptions
NDWMP 120/026/52
120/026/62
120/030/81
180/026/62
180/030/81
1 2
3
US
UD
CS
CD
80
90
105
120
Vedere tabellaSee tables
120240
BRBRL
Versioni
Caratteristiche tecniche Technical features
Versions
Designazione Classification
L’accoppiamento di un riduttore a vite senza fine con un ridutto-re epicicloidale consente di ottenere elevati rapporti di riduzione (imax = 1/18452) e di disporre di un gruppo autolubrificato compat-to, silenzioso e con un’elevata affidabilità.
The coupling of a wormgearbox to a planetary gearbox allows to obtain high reduction ratios (imax = 1/18452) and to get a compact, silent, self lubricated with high reliability group.
Simbologia
n1 [min-1] Velocità in ingresso / Input speed
n2 [min-1] Velocità in uscita / Output speed
i Rapporto di riduzione / Ratio
P1 [kW] Potenza in entrata / Input power
Mn [Nm] Coppia nominale in uscita del riduttore / Maximum output torque of the gearbox
M2 [Nm] Coppia in uscita in funzione di P1 / Output torque referred to P1
sf Fattore di servizio / Service factor
Rd % Rendimento dinamico / Dynamic efficiency
A2 N] Carico assiale ammissibile in uscita / Permitted output axial load
R2 [N] Carico radiale ammissibile in uscita / Permitted output radial load
Symbols
US CDCSUD
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G3
NDWMP
NDW
MP
Lubrificazione Lubrication
I riduttori a vite senza fine della serie CM sono lubrificati a vita con olio sintetico di viscosità 320 e possono essere installati in qualunque posizione di montaggio.
I riduttori epicicloidali sono lubrificati in modo permanente, non richiedono quindi ulteriore manutenzione. Questo gli consente di essere installati praticamente ovunque.
Permanent synthetic oil long-life lubrication allow to use CM wormgearbox range in all mounting position.
Planetary gearboxes are life-time lubricated with grease, therefore they are maintenance free.They can be installed in any location.
Carichi radiali Radial loads
Numero di stadiStages number
Carichi Radiali R2 [N]Radial Load R2 [N]
P52 P62 P811 200 240 4002 320 360 6003 450 520 1000
Numero di stadiStages number
Carichi Assiali A2 [N]Axial Load A2 [N]
P52 P62 P811 60 70 802 100 100 1203 150 150 200
2
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G4
NDWMP
MotoriduttoreGearmotor
Numero stadi epicicloidalePlanetary stages number
Rapporto epicicloidale Planetary ratio
Rapporto vite senza fineWormgearbox ratio
Rapporto finaleTotal ratio
.../026/52
.../026/62
.../030/81
1 6.75
10 67.515 101.320 13530 202.540 27050 337.560 405
228.93
10 289.315 434.020 578.630 867.940 115750 144760 1736
34.97 60 209845.56 60 2734
Rapporti Ratios
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G5
NDWMP
NDW
MP
Technical data for S2 dutyDati tecnici per servizio S2
160(3000 min-1) 44.4 23 1.1 67.5 120/026/521 120/240
29.6 25 1.0 101.322.2 25 1.0 135.014.8 25 1.0 202.511.1 25 1.0 270.0
10.4 25 1.0 289.3 120/026/522 120/240
8.9 25 1.0 337.5 120/026/521 120/2407.4 25 1.0 405.0
6.9 25 1.0 434.0 120/026/522 120/2405.2 25 1.0 578.63.5 25 1.0 867.92.6 25 1.0 1157.02.1 25 1.0 1447.01.7 25 1.0 1736.01.4 25 1.0 2098.01.1 25 1.0 2734.0
44.4 23 1.7 67.5 120/026/621 120/24029.6 34 1.2 101.322.2 40 1.0 135.014.8 40 1.0 202.511.1 40 1.0 270.0
10.4 50 1.0 289.3 120/026/622 120/240
8.9 40 1.0 337.5 120/026/621 120/2407.4 40 1.0 405.0
6.9 50 1.0 434.0 120/026/622 120/2405.2 50 1.0 578.63.5 50 1.0 867.92.6 50 1.0 1157.02.1 50 1.0 1447.01.7 50 1.0 1736.01.4 50 1.0 2098.01.1 50 1.0 2734.0
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
160(3000 min-1) 44.4 24 3.4 67.5 120/030/811 120/240
29.6 35 2.3 101.322.2 45 1.8 135.014.8 61 1.3 202.511.1 77 1.0 270.0
10.4 95 1.3 289.3 120/030/812 120/240
8.9 80 1.0 337.5 120/030/811 120/2407.4 80 1.0 405.0
6.9 120 1.0 434.0 120/030/812 120/2405.2 120 1.0 578.63.5 120 1.0 867.92.6 120 1.0 1157.02.1 120 1.0 1447.01.7 120 1.0 1736.01.4 120 1.0 2098.01.1 120 1.0 2734.0
250(3000 min-1) 44.4 37 1.1 67.5 180/026/621 120/240
44.4 40 2.0 67.5 180/030/811 120/24029.6 54 1.5 101.3 120/24022.2 70 1.1 135.0 120/24014.8 80 1.0 202.5 120/240
10.4 120 1.0 289.3 180/030/812 120/240
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
Nota: Verificare sempre che la coppia M2 utilizzata non ecceda il valore indicato nelle caselle in grigio
Note: Please check that the output torque M2 does not exceed the value into the grey areas
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G6
NDWMPDimensionsDimensioni
NDWMP120/026/52...U
NDWMP120/026/62...U
10.5
0
0
40
70
M5x10
34
49
26
5
12 h
7
4.225 88.5102.5
20.8
3
M4x10DIN 332
32 h
9
52
Linguetta 4x4x16DIN 6885Key 4x4x16DIN 6885
(WMP026/522)
(WMP026/521)35 48 112
8
2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
A65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
L= 1000 mm
10.5
A M5x12.5DIN 332
Linguetta 5x5x18DIN 6885Key 5x5x18DIN 6885
52
70
M5x10
34
49
26
5
14 h
7
925 88.5104.5
30
5
40 h
9
62
(WMP026/622)
(WMP026/621)35 48
8
112 2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
0
0
L= 1000 mm
G9
NDWMP120/026/52...C
G9
NDWMP120/026/62...C
NDWMP120/026/52...U BR
G9
NDWMP120/026/52...U BRL
NDWMP120/026/62...U BR
G9
NDWMP120/026/62...U BRL
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G7
NDWMP
NDW
MP
DimensionsDimensioni
NDWMP120/030/81...U
10
.5
A
65
80
M6x12
40
40
57
56 931 123.5
145.540
5
M6x16DIN 332
50
h9
81
Linguetta 6x6x28DIN 6885Key 6x6x28DIN 6885
(WMP030/811)
(WMP030/812)
19
h7
30
88
112 2.5
10
90
10.1
49.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
0
0
L= 1000 mm
G9
NDWMP120/030/81...C NDWMP120/030/81...U BR
G9
NDWMP120/030/81...U BRL
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G8
NDWMPDimensionsDimensioni
NDWMP180/026/62...U
NDWMP180/030/81...U
10
.5
A
52
70
M5x10
34
49
26
5
14
h7
925 88.5104.5
30
5
40
h9
62
(WMP026/622)
(WMP026/621)35 48
8
130 2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A0
0
L= 1000 mm
10
.5
A
65
80
M6x12
40
40
57
56 931 123.5
145.540
5
M6x16DIN 332
50 h
9
81
Linguetta 6x6x28DIN 6885Key 6x6x28DIN 6885
(WMP030/811)
(WMP030/812)
19
h7
30
88
130 2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
0
0
L= 1000 mm
G9
NDWMP180/026/62...C
G9
NDWMP180/030/81...C
NDWMP180/026/62...U BR
G9
NDWMP180/026/62...U BRL
NDWMP180/030/81...U BR
G9
NDWMP180/030/81...U BRL
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G9
NDWMP
NDW
MP
DimensionsDimensioni
NDWMP.../.../... C... Flange uscita / Output flanges
f2
c2
b2
s2
e2
a2
Dimensioni / Dimensions
P a2 b2 c2 e2 f2 s2 Flangia uscitaOutput flange
52
80 50 j7 9 65 2.5 M5 C8090 60 j7 9 75 2.5 5.5 C90105 70 j7 9 85 2.5 6.5 C105120 80 j7 9 100 3.0 6.5 C120
62
80 50 j7 9 65 2.5 M5 C8090 60 j7 9 75 2.5 5.5 C90105 70 j7 9 85 2.5 6.5 C105120 80 j7 9 100 3.0 6.5 C120
8190 60 j7 9 75 2.5 M5 C90
105 70 j7 9 85 2.5 M6 C105120 80 j7 9 100 3.0 6.5 C120
NDP.../... U BR Freno / Brake
47
56
NDP.../... U BRL Freno con leva di sblocco/ Brake with hand release
47
56
5
354
8
MOTORIDUTTORI CC COMBINATI A MAGNETI PERMANENTI IN NEODIMIONEODYMIUM PERMANENT MAGNETS DC DOUBLE REDUCTION GEARMOTORS
G10
NDWMP
Note/Notes
HANGZHOU TRANSTECNO POWERTRANSMISSIONS CO LTDChanglian Road, Fengdu Industry zone,Pingyao Town Yuhang Area, Hangzhou, 311115 - CHINAT +86 571 86 92 02 60F +86 571 86 92 18 [email protected]
MA TRANSTECNO S.A.P.I. DE C.V. Av. Mundial # 176, Parque Industrial JM Apodaca, Nuevo León, C.P. 66600 MÉXICOT +52 [email protected]
TRANSTECNO SRLVia Caduti di Sabbiuno, 11/D-E40011 Anzola dell’Emilia (BO) ITALYT+39 051 64 25 811F +39 051 73 49 [email protected]
CATR
OB
IN03
15
SALES OFFICE OCEANIAUnit 3, 18-24 Ricketts Road, Mount Waverley 3149 Victoria - AUSTRALIATel: +61 9544 8005Fax: +61 9543 8005 Mobile: +61 0438 060 [email protected] www.transtecno.com.au
SALES OFFICE FRANCE12 Impasse des Mûriers 38300 Ruy - FRANCETel: +33 (0) 6 85 12 09 87Fax-Italy: +39 051 733 [email protected]
SALES OFFICE SOUTH KOREAD-304 Songdo BRC Smart Valley 30, Songdomirae-ro, Yeonsu-gu, Incheon, 406-840 - KOREATel: +82 70 8288 2107Fax: +82 32 815 2107Mobile: +82 10 5094 [email protected]
www.transtecno.com
SALES OFFICE INDIAA/10, Anagha, S.N. Road, Mulund (W) Mumbai 400080 - INDIATel: +91 9820614698Fax-Italy: +39 051 733 [email protected]
SALES OFFICE BRAZILRua Dr. Freire Alemão 155 / 402 - CEP. 90450-060Auxiliadora Porto Alegre RS - BRAZILTel: +55 51 3251 5447Fax: +55 51 3251 5447Mobile: +55 51 811 45 [email protected]
TRANSTECNO B.V. De Stuwdam, 433815 KM Amersfoort - NEDERLANDTel: +31(0) 33 45 19 505Fax: +31(0) 33 45 19 [email protected] www.transtecno.nl
SALES OFFICE GUANGZHOURoom 401A, LeTian Building, No.188 TangAn Road,Tianhe District, Guangzhou City, 510665 - CHINATel:+ 86 20 387 760 57Fax: + 86 20 387 761 [email protected]
TRANSTECNO SRL (Branch)Via Ferrari, 27/11 41043 Fraz. CorloFormigine (MO) - ITALYTel. +39 059 55 75 22Fax +39 059 55 74 [email protected]
TRANSTECNO U.S.A. LLC5440 S.W. 156th Place Miami, FL 33185 - USATel: +1 (305) 220-4423 Fax: +1 (305) [email protected]
Small but Strong
20
15