Moshell Commands - [PDF Document] Cmds COMANDI MOSHELL Moshell Command Moshell Command Commands Commands Commands Commands Commands Commands View more Transcripts MOSHELL COMMANDS

Moshell Commands - [PDF Document]

Sign in Register

Hide

Moshell Commands

Category: Documents

DownloadReport copyright

Share:

Copy

Description

MOSHELL COMMANDS NOTE: Exclusive for PENTA PROJECT TEAM/Author/RMALVAREZ 1. To read MCPA temp Cabx (to check RBS status) lhsh 010200/port_0_dev_13 mcpaBoard temp

Related documents

Moshell Commands

Moshell Commands

46986932 Moshell Commands

77165062 Alarm Handling Guide Moshell Commands V1

Alarm Handling Guide Moshell Commands V1

Alarm Handling Guide Moshell Commands V1

MoShell Ericsson

moshell guidance

Moshell Basic

moshell Cmds

COMANDI MOSHELL

Moshell Command

Moshell Command

Commands

Commands

Commands

Commands

Commands

Commands

Commands

View more

Transcripts

MOSHELL COMMANDS

NOTE: Exclusive for PENTA PROJECT TEAM/Author/RMALVAREZ 1. To read MCPA temp Cabx (to check RBS status) lhsh 010200/port_0_dev_13 mcpaBoard temp lhsh 010200/port_0_dev_13 help lhsh 010200/port_0_dev_13 restart (if need to restart) TELNET commands should MOSHELL hang due to GPB telnet IP add cv cu cv ls cv mk cv set restartObj me

2. To check E1-MS port in RXI/RBS (add E1 for RBS) In RNC st get iub - look for RBS ID In In RXI pr . eg. pr .0095 lk st atmport=ms-x-y bl lget ms-2-2 (then check iub number with STR printout see tally or not) reservedBy Aal2PathVccTp=b0001a2 get radiolink num > wait 2 > done

8.

9. To enable E1 supervision set 10. To create Group (eg. Not reserved VclTp) get vcltp reservedby !.*= lma vcltp reservedby !.*= 11. To create performance counters pst

12. To check cell state In RBS lst cell get radiolinks (to see how many line/s being used) 13. To check RBS MO In RBS st plug (AuxPlugInUnit=2 is the RET, cabx cab (without the external parts)

AuxPlugInUnit=1 is the ASC)

14. To change SAC (Service Area Code) In RBS determine max capability to transmit SUNWMU> get all xdl get all xdl ---> in EMAS, click RBSLocalCell, Properties, Characteristics, Max & Min value example result printout = maxDlPowerCapability 422

PDF created with pdfFactory trial version www.pdffactory.com

15. To lock/unlock cells In RNC st utrancell=sunwmu lst sunw lbl sunw (to lock cell & channels) bl sunw (to lock cell only) deb sunw (to unlock) 16. To check RBS info In RBS Get 0 Get 1 (check ntpServerAddressPrimary) 17. To check network clock synchronisation In RNC & RBS Read clock (GMT +8) ntpconfig info Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) from get 1 18. To check atmport & pp (physical port) In RBS lpr atmport vc32&33 for signaling lpget 1007 (vc proxy) to see number of ATM traffic cells transferred get atmport=1-2-2 then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2 to un/lock have to set values 1 or 0 19. To administer state of Mos In RBS St plug Deb proxy Bl proxy No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl 20. To autocreateCV In RNC & RBS Get config Cv ls (2 CVs will be used for the autocreate CV function) Set proxy autoCreatedCVIsTurnedOn true/false Set timeForAutoCreatedCV (UTC time) Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm) 21. To restart Node In RNC,RXI & RBS acc 0 restart poll (to wait 20seconds until node comes up again) 22. To create CV In RNC,RXI & RBS cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV cvset CXP9010373%1_R11G -- to set the CV startable


23. To restart node In RNC & node B acc 0 restart pol - to get moshell connected once node has restarted 24. To check plugin status In RNC & node B st plugin st plugin 1 0 st plugin 0 1 lst plug 0 25. To enter Moshell with security enabled In RNC & node B moshell -c host.p12 10.78.37.225 26. To block sectors via Moshell In RNC St blip Bl the proxy Deb the proxy (can have multiple proxies for more cells) 27. To view delay & attenuation parameters within a sector In RBS Get jumper Get feeder Get rbs xdl 28. To delete something already done with a script In RNC/RXI/RBS First you have to generate the MO Delete script This is done by ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ ./undomo add2nde1inrxi_PUJMMU.mo > pujmrxibesi01.mo [~]$ Where add2nde1inrxi_PUJMMU.mo is the script which was run earlier And pujmrxibesi01.mo is the Delete Script Modify add2nde1inrxi_PUJMMU.mo so that downtime will be less Run pujmrxibesi01.mo to undo the wrongly defined MO Then run the modified/correct add2nde1inrxi_PUJMMU.mo 29. To check E1 state In RBS St atmport Check port lock state St pp St pp2

st pp3

st pp4

30. To check locked board in node In all nodes lst plug 0

31. To restart / reload board In all nodes Acc 000900 restart


Acc 001400 reload

32. run and trun In all nodes trun is only for xml scripts run for scripts such as set DAGAMU_1 usedFreqThresh2dEcno -12 trun for running the last script : rbs_EQINMU_site_complete.mo run is for any script (txt for example) open logfile l+ 20060113_CR003_RNCTGEM01.log cannot have undo mode while having gsg activated run CR003_13012006.txt close logfile 33. CAB printout 0 = slot 28, 1 = slot 1 In all nodes RXIKPNG02> cab 060206-11:09:22 ....... ================================================================================== =================== SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR ================================================================================== =================== 0 1 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364489 0 2 HUB MP ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494707 +32C Active 0 3 GPB40 ON OFF OFF ROJ 119 2106/40 R5A 20050626 TU86494699 +31C StandbyReady 0 4 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442436 0 5 TUB ON OFF OFF ROJ 119 2104/4 R3B 20050620 TU86442439 0 8 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644146 0 10 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644042 0 12 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644052 0 14 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644056 0 16 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644037 0 18 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050718 TU86644067 0 20 ET-MC41 ON OFF OFF ROJ 119 2161/1 R3C 20050708 TU86592867 0 24 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545997 0 25 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545998 0 26 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86545996 0 27 ET-M4 ON OFF OFF ROJ 119 2102/1 R3G 20050702 TU86546001 0 0 SCB2 ON OFF OFF ROJ 119 2108/3 R3D 20050608 TU86364157 ---------------------------------------------------------------------------------------------------1 is slot 1 0 is slot 28


34. When lock/unlock from log In RBS Lgv Lgaevsm rather long 35. Read VSWR / OUTPUT Power from RBS In RBS lhsh 010900 ps port* lhsh 010600 lhsh port_0_dev_17 asc vswr lhsh 010900 lhsh port_0_dev_19 asc vswr lhsh 010900 lhsh port_0_dev_19 asc vswr lhsh 010600 lhsh port_0_dev_17 asc pow acc 011200 restart - restart AIU port_0_dev_5 FU12 port_1_dev_11 ASC RU21 Sec.2-port_4_dev_6 port_4_dev_6 FU12 port_5_dev_13 ASC Sec.3-port_8_dev_7 RU21 port_8_dev_7 FU12 port_9_dev_15 ASC SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR ============================================================================ ===================================== 0 12 port_0_dev_4 RU22 steady 16hz off KRC 118 22/1 R1G 20070829 AE55520905 0 12 port_4_dev_5 RU22 steady 16hz off KRC 118 22/1 R1G 20070829 AE55520893 0 12 port_8_dev_6 RU22 steady 16hz off KRC 118 22/1 R1G 20070829 AE55520921 ---------------------------------------------------------------------------------------------------------------080408-13:32:58 10.109.246.153 7.0h RBS_NODE_MODEL_J_5_16 stopfile=/tmp/1052 $ lhsh 001200/port_0_dev_4 fui get devstat Board: fuHw: Hw08P1, faultStatus: 0x0, temp: 47.0, sv: on, svTmaDegrad: off, comp: on Dev1: mode: {ModeAuxTma}, feedPow: highPow capability: {vswrAntSv | tma19Sv | ulGainConf | maxUlGain} svCtrl: 0xe400, faultStatus: 0x0000 txFreq: 882800, sensitivity: 49, gainUl: 4.0, volt: 16571.5, curr: 84.0, dCycle: 0.0 Dev2: mode: {ModeAuxTma}, feedPow: highPow capability: {resAntSv | tma19Sv | ulGainConf | maxUlGain} svCtrl: 0x2400, faultStatus: 0x0000 txFreq: 0, sensitivity: 0, gainUl: 4.0, volt: 16565.9, curr: 90.4, dCycle: 0.0 3 sectors sample USMLAP30> lhsh 001200/port_4_dev_5 fui get vswr 080521-03:26:13 10.108.243.9 7.0t RBS_NODE_MODEL_J_5_16 stopfile=/tmp/5952 $ lhsh 001200/port_4_dev_5 fui get vswr vswr: -0.7[dB] get 1417 que 060615-14:51:29 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2 ============================================================================== MO Attribute Value ============================================================================== Sector=1,Carrier=1 frequencyPlane 1 Sector=1,Carrier=1 queueSelectAlgorithm 0 (ROUND_ROBIN) ============================================================================== Total: 1 MOs

46. To check through logs In nodes lgaevsmir


47. To check RBS ID in RBS In node RBS Get IUB 48. To check antenna Supervision Threshold In node RBS get antenna antennaSupervisionThreshold 49. To check downlink & uplink range In node RBS lget antenna low|high The downlink uplink = 190x5=950

50. To check commands executed within a node In node Lgo 1 1 for number of days 51. To add software allocations in the RBS for ETMC1 In node RBS Open EMAS Go to SoftwareAllocation Right click, Add Choose the specific board/ swallocation - fact is it will create a SWallocation ID = 1 in the rbs Use moshell to create an Undo file U+ Then delete the swallocation Lt swalloc Pr swalloc Del proxy U Then edit the undo file 52. To enable trace In node RBS te enable bus_send bus_receive NBAP* te s Ans* (just to look at the last line) te enable bus_send bus_receive Ans_aal2ap_proc te log read | decoder.pl | tee SCO1BU.log | flow.pl colour to place it in a log --- te log read | decoder.pl | tee SCO1BU.log | flow.pl colour logs will be at /ethanap 53. To check which module the card is at In node RBS N Mon? TargetMonitor on disk: Yes TargetMonitor loaded: No TargetMonitor started: No Mon+ te status Ans* to on NBAP trace te enable bus_send bus_receive NBAP to see if NBAP trace is ON or NOT te status NBAP


$ te status NBAP pid name enabled groups - NBAP check error info bus_send bus_receive interface object To disable --- te disable bus_send bus_receive NBAP Check status again $ te status NBAP pid name enabled groups - NBAP check error info interface object

In node TeraTerm User = eric Pw = ericsson Monitor 10.78.xx.xx 54. To check commands sent in node In node RNC, RBS, RXI hi 55. To check external Open Door alarm in RBS is set to which probable cause In node RBS Pr almdevice Get proxy (either 2 / 1 or 9) Usually 9 for RBS door and 2 for BBU door Some put 1 for BBU door Get proxy for parameter check Lock proxy to change probableCause Bl 54 probableCause 522 power supply probableCause 118 enclosure_door_open_m3100 set 54 probableCause 118 then unlock back proxy deb 54 56. To calibrate RET via moshell In node RBS Lpr ret Acl proxy 253 Equipment=1,SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1 ,RetDevice=1 acc 267 forceCalibration alarm will go away in 2 minutes approx


About us|Terms

out of 11

Moshell Commands