More Future. More Technology. Full Service. - HOMAG · 2018. 12. 3. · 12 HOMAG Edition25 Saw HOMAG Edition25 Saw 13 More Future. More Technology. Full Service. SAWTEQ B-130 Edition25

Edition25 Special ModelsStorage, Saw, Edge, Return, CNC, Moulding, Sanding, Painting, Beam processing, Packing, Software

More Future.More Technology.Full Service.

YOUR SOLUTION

CAMPAIGN PERIODEXTENDED UNTIL31.05.2019

HOMAG Edition25 Content 03HOMAG Edition25 Content02

Edition25.Avail yourself now of our Edition25 we are offering on the occasion of the 25th HOMAG Treff. Special models. Special prices. Warranty extension.

YOUR SOLUTION

CONTENT [NAV PER CLICK]

06 Storage

12 Saw | intelliDivide | Nesting

28 Edge

34 Return

40 CNC | woodCAD|CAM

58 Moulding

60 Sanding

62 Painting

66 Beam processing

72 Packing

76 Digital | Software | Service

82 Life Cycle Services

05

Edition25. Benefit from these advantages:

More Future:

All Edition25 models are fully digitalized and tapio-ready*. Useful Apps such as MachineBoard (5 years) are already included**. Immerse yourself in the digital age and use the nearly unlimited performance of our cloud based sofware solutions.

More Technology:

All Edition25 models include comprehensive options. Enjoy our technology boost. With our Edition25 you raise your production performance to a higher level. More included! More extras! More on-top!

Full Service:

All Edition25 models get a warranty extension from 12 to 24 months and include the advantages of the „WarrantyPlus 24“ Service Package. 100% reliable planning. Possible service cases are hereby covered. The included inspection will exclusively be carried out by certified personnel. Because you matter to us!

Avail yourself now of our Edition25 we are offeringon the occasion of the 25th HOMAG Treff.Special models. Special prices. Warranty extension.

More Future.More Technology.Full Service.

*Currently available in the EU and Switzerland (Due to the fast pace of the IT-landscape, the compatibility to the tapio platform is warranted for five years.)

The content of this brochure is not binding for an order. You have to clarify separately all commercial conditions of the Edition25 campaign with your respective contact partner of the HOMAG Group AG.

0706 HOMAG Edition25 StorageHOMAG Edition25 Storage

More Future. More Technology. Full Service. STORETEQ S-200 Edition25Logistics with appreciable optimization effects. Whether a panel spectrum as large as possible, high speed, or full equipment. Transportation routes are optimized, material and

time are measurably saved by using the horizontal storage system. The STORETEQ S-200 Edition25 is intelligent logistics with noticeable optimization effects.

ALL IN – TECHNOLOGY Extended basic equipment for more flexibility, transparency, and safety:

An additional user license is included in your new STORETEQ S-200 Edition25!

· 2 licenses are already in included in the standard. · An additional license comes on top. It enables the process planning to access the storage in real time, to permanently compare stocks etc., and to generate orders for the storage.

Also included in your new STORETEQ S-200 Edition25:

· Uninterruptible power supply · Back-up hard disc, incl. safety software package

All further features are up to you – so that your new HOMAG storage system suits you perfectly.

STORETEQ S-200 EDITION25

Span width (mm)

Basic machine

5,000

With additional equipment

12,000

Frame length (mm) 10,000 50,000

Speed (m/min)

Max. 25% increase in performance by

increasing accelerations and speeds

Bridge 60

Carriage 80

Lifting drive 30

Workpiece length (mm) 2,000 – 4,200 max. 5,600

Workpiece width (mm) 800 – 2,200 min. 400

Workpiece thickness (raw boards) (mm) starting from 12 starting from 3

Workpiece thickness (coated) (mm) starting from 8 starting from 3

Workpiece weight (kg) 250 250

Stack height (mm) 2,100 2,500

ALL IN – DIGITAL

· MachineBoard* App (5 years free of charge): Machine data and status in real time

· ServiceBoard* App: Wireless video diagnosis in real time with the Service Partner

· DataSave* (25 weeks free of charge): Automatic saving of machine data

· MMR professional Monitoring for production optimization


ALL IN – SERVICE„WarrantyPlus 24“ warranty extension to 24 months or 5,000 operating hours

· Remote service until 6 p.m. (CET) · Spare parts (wearing parts excluded) · Field service incl. travel expenses · 1 inspection incl. travel expenses

* In combination with a HOMAG pressure beam saw or CNC that offers as linked processing machine Edition25 – „WarrantyPlus 24“ .

CLICK BACK TO START

CLICK FOR CONTACT

CLICK FOR BASIC INFO

https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contacthttps://www.homag.com/en/product-detail/storage-system-storeteq-s-200/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=STORETEQ-S-200

0908 HOMAG Edition25 StorageHOMAG Edition25 Storage

More Future. More Technology. Full Service. STORETEQ S-500 Edition25More potential for operating machines. A lot of leeway in combining operating machines and in panel variety make the STORETEQ S-500 the icon within the storage systems. This

storage system offers high efficient logistics for industry and handicraft.

ALL IN – TECHNOLOGY Extended basic equipment for more flexibility, transparency, and safety:

An additional user license is included in your new STORETEQ S-500 Edition25!

· 2 licenses are already in included in the standard. · An additional license comes on top. It enables the process planning to access to the storage in real time, to permanently compare stocks etc., and to generate orders for the storage.

Also included in your new STORETEQ S-500 Edition25:

· Uninterruptible power supply · Back-up hard disc, incl. safety software package

All further features are up to you – so that your new HOMAG storage system suits you perfectly.

ALL IN – DIGITAL








* In combination with a HOMAG pressure beam saw or CNC that offers as linked processing machine Edition25 – „WarrantyPlus 24“

STORETEQ S-500 EDITION25

Span width (mm)

Basic machine

5,000

With additional equipment

16,000

Frame length (mm) 10,000 50,000

Speed (m/min)

Max. 35% increase in performance by

increasing accelerations and speeds

Bridge 60

Carriage 80

Lifting drive 30

Workpiece length (mm) 2,000 – 4,200 max. 5,600

Workpiece width (mm) 800 – 2,200 min. 400

Workpiece thickness (raw boards) (mm) starting from 12 starting from 3

Workpiece thickness (coated) (mm) starting from 8 starting from 3

Workpiece weight (kg) 250 250

Stack height (mm) 2,100 2,500

CLICK BACK TO START

CLICK FOR CONTACT


https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contacthttps://www.homag.com/en/product-detail/storage-system-storeteq-s-500/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=STORETEQ-S-500

Benefit now!

Your price advantage!

16.07.-31.05.2019

HOMAG contact person LINK

https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contacthttps://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

1312 HOMAG Edition25 SawHOMAG Edition25 Saw

More Future. More Technology. Full Service. SAWTEQ B-130 Edition25Top quality at the best possible price: our smallest saw is equipped as standard with everything you need for cutting single panels and small batches. The SAWTEQ B-130 Edition25 panel saw costs hardly any more than a well-equipped sliding table saw, while providing a much more

precise and efficient cutting process. This is due to many proven HOMAG technologies. Look forward now to your new SAWTEQ B-130 Edition25 single saw – equipped with the bevel cut unit module45 now and up until 05/31/2019 – at a special price!

ALL IN – TECHNOLOGY Enhanced features of the basic machine

· Bevel cut unit module45 · Two 650 mm wide air cushion tables instead of the standard 500 mm wide tables

· Additional rollers on the edge of the air cushion table for particularly gentle positioning of material and greater operating comfort

All further features are up to you – so that your new HOMAG saw suits you perfectly.

The offer is limited to 45 saws. All details can be found in the SAWTEQ B-130 brochure and in the flyer “2x45 – and at the end you win!”

ALL IN – DIGITAL

· “intelliDivide basic” (6 months free of charge): Cutting optimization “on demand”








SAWTEQ B-130 EDITION25

Saw blade projection (mm) 60

Cutting length(s) (mm) 3,200

Saw carriage speed (m/min) up to 60

Program fence speed (m/min) up to 60

Operating software CADmatic 5

Monitor 21” TFT flatscreen display

with touch function


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/panel-dividing-saw-sawteq-b-130/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SAWTEQ-B-130https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. SAWTEQ B-200 Edition25 The SAWTEQ B-200 Edition25 offers you exactly what you need in a woodworking shop for cutting panels horizontally: plenty of power, precision and flexibility. That’s because this well-equipped saw can easily be upgraded at any time. You remain flexible and get a cutting solution that can grow in line with your requirements. If equipped with an integrated lifting

table, the SAWTEQ B-200 Edition25 can also be fed from the rear. This is much more ergonomic, faster and more efficient than feeding solely manually from the front. Look forward to your new SAWTEQ B-200 Edition25 single saw – equipped with a machine table with air jets and intelliGuide basic now and up until 05/31/2019 at no extra cost!

ALL IN – TECHNOLOGY During the run of the special offer, the otherwise freely configurable saw comes equipped with the following features at no extra cost:

· intelliGuide basic: a multi-colored LED strip at the cutting line guides the operator through the cutting process. This prevents errors and increases efficiency

· Machine table equipped with air jets: makes handling parts easier and protects the material

Lifting table feed? Cutting length? Features? All that is up to you – so that your new HOMAG saw suits you perfectly. All details can be found in the 2 series brochure.


Saw blade projection (mm) 60 (optional: 80 or 95)

Cutting length(s) (mm) 3,200 / 3,800 / 4,300


(optional: up to 120)




with touch function

ALL IN – DIGITAL









CLICK BACK TO START

CLICK FOR CONTACT


https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contacthttps://www.homag.com/en/product-detail/panel-dividing-saw-sawteq-b-200/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SAQTEQ-B-200


More Future. More Technology. Full Service. SAWTEQ B-300 Edition25 With the SAWTEQ B-300 Edition25, you get a single saw that offers great versatility for cutting processes and, in addition, is ready for networked production. No matter whether the single saw or the single saw with lifting table, this machine is ideal for batch size 1 production as well as for smaller series production. What’s more, the SAWTEQ B-300

Edition25 is the perfect choice for connection to horizontal storage systems, and also convinces with a wide range of optional features. Look forward to you new SAWTEQ B-300 Edition25 single saw (optionally with or without lifting table) – equipped with dustEx and intelliGuide basic now and up until 05/31/2019 – at no extra cost!



· Machine table equipped with air jets and dustEx, the effective extraction solution for optimum surface protection

Lifting table feed? Cutting length? Features? All that’s up to you. Your new HOMAG saw should suit you perfectly. All details can be found in the 3 series brochure.


Saw blade projection (mm) 80 (optional: 95)

Cutting length(s) (mm) 3,200 / 3,800 / 4,300 / 5,600






with touch function


ALL IN – DIGITAL









CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/panel-dividing-saw-sawteq-b-300/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SAWTEXQ-B-300https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. SAWTEQ B-400 Edition25 The SAWTEQ B-400 Edition25 is the ideal cutting solution for growing businesses and for producing medium-sized to large batches. It is the combination of performance, speed and reliable technology that makes this panel saw so attractive. The 110 mm or 125 mm saw blade projection provides the

required high-throughput capability. Look forward to your new SAWTEQ B-400 Edition25 single saw (optionally with or without lifting table) – equipped with dustEx und intelliGuide basic now and up until 05/31/2019 – at no extra cost!



· Machine table equipped with air jets and dustEx, the effective extraction solution for optimum surface protection

Lifting table feed? Cutting length? Features? All that’s up to you. Your new HOMAG saw should suit you perfectly. All details can be found in the 4 series brochure.


Saw blade projection (mm) 110 (optional: 125)

Cutting length(s) (mm) 3,200 / 3,800 / 4,300 / 5,600






with touch function


ALL IN – DIGITAL









CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/panel-dividing-saw-sawteq-b-400/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SAWTEQ-B-400https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

2120

intelliDivide – the “software-as-a-service” optimization option

HOW YOU BENEFIT FROM INTELLIDIVIDE

· You do not require any local hardware or software. intelliDivide works independently of the operating system and on every mobile or stationary device with internet access, whether desktop computer, smartphone or tablet

· You do not have to worry about maintenance or updates · intelliDivide automatically and simultaneously calculates multiple alternatives · The optimization results can be quickly and easily compared · The costs for intelliDivide are usage-based and precisely calculable · For more information visit www.tapio.one

Optimization software, too, plays an important role in determining the competitiveness of a woodworking company in its cutting processes. No wonder, as intelligently optimized cutting patterns save a great deal of time, reduce the consumption of material and resources, and provide for efficient processes. This can be achieved more flexibly and more independently than ever with intelliDivide – the “software-as-a-service” optimization option.

Many customers know from their own experience that a good one to two hours of valuable work time are spent every day in the work preparation department on manipulating and correcting optimization results. With intelliDivide, these production hours are no longer required and can be used for other value-adding tasks.

INTELLIDIVIDE IS FLEXIBLE AND POWERFULHow is this possible? intelliDivide is cloud-based optimization software in the tapio ecosystem, which can be used directly via the Internet. The customer only requires online access. There is no need to install any special hardware or software locally. The cutting data is simply uploaded – and intelliDivide automatically starts optimizing, swiftly calculating a choice of multiple alternatives in parallel.

These include, for example, a purely waste-based result as well as results focusing on shortest machine time or simplest handling. The customer decides which optimization result best suits his requirements, downloads the data and starts the cutting process. “This is possible because intelliDivide even automatically integrates the machine configuration, provided that the saw is tapio-ready and connected to tapio,” explains Arne Mömesheim, Product Manager at HOMAG Plattenaufteiltechnik GmbH, adding: “Incidentally, our new HOMAG saws already come tapio-ready straight from the factory.”

IDEAL FOR TRADE AND INDUSTRIAL CUSTOMERSBoth trade and industry benefit from the new possibilities. With this innovative optimization solution, small and medium-sized enterprises can increase their ability to compete on the market because they get first-rate optimization results for their cutting processes with no investment, update or maintenance costs.

Furthermore, the costs for using intelliDivide are precisely calculable and comparatively modest. Costs are based on usage and are charged on the basis of contracts involving either a monthly or an annual subscription. Industrial enterprises with very high optimization volumes are able to increase their value added significantly with intelliDivide. This is because the cloud-based optimization software uses higher computing capacities than any offline solution, enabling it to provide users not only with numerous optimization variants, but also with a calculation of the cutting time based on real usage data.


https://www.homag.com/news-events/news/artikel/intellidivide-die-optimierungs-software-as-a-service-auf-tapio-basis/https://www.homag.com/en/news-events/news/article/intellidivide-optimization-software-as-a-service-on-tapio-basis/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=intelliDivide

2322 HOMAG Edition25 Nesting

More Future. More Technology. Full Service. CENTATEQ N-500 Edition25The compact nesting machine in gantry design. Our nesting machines enable cutting-optimized processing and dividing of plate-shaped materials. The typical applications of nesting are creation of carcass furniture, dividing and refining of

furniture fronts and construction of frame furniture. Various possibilities for the automation of the material handling ensure a high time saving and an even more effective work.

ALL IN – TECHNOLOGY Variant 1: stand-alone machine with manual handling table size 2.250 x 3.100 mm / 7 x 10 feet

· 13,2 kW air-cooled spindle · Unit interface for C-axis · Matrix Pro Plus table segmentation – more efficiency due to focussed vacuum segmentation

· Cut Rite included · Full software package

Variant 2: Concept 1 Automatic infeed and outfeedtable size 2.250 x 3.100 mm / 7 x 10 feet

· 13,2 kW air-cooled spindle · Unit interface for C axis · Matrix Pro Plus table segmentation – more efficiency due to focussed vacuum segmentation

· Cut Rite included · Full software package · Also as concept 1R, 2, 3R or 3 (level of automation: infeed, outfeed, labeling)

ALL IN – DIGITAL









HOMAG Edition25 Nesting

CENTATEQ N-500 EDITION25

Working field width (mm/feet) 2,250/7

Working field length (mm/feet) 3,100/10

Working field height (mm/inch) 100/3,94

Vacuum capacity (m³/h) 290/345 – 870/1,035

Vacuum capacity (Hz) 50/60

woodCAD|CAM CENTATEQ N-500 Edition25

· woodCAD|CAM incl. CAD Engine powered with Autodesk Technolgy

· woodCAD Process add-on

· woodCAM module for CENTATEQ N series

· Includes transfer interface to Cut Rite nesting · Maintenance contract for one year

*depending on equipment

CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cnc-gantry-processing-center-centateq-n-500/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-N-500https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

2524 HOMAG Edition25 Nesting

More Future. More Technology. Full Service. CENTATEQ N-800 Edition25The power pack among our nesting solutions. The typical applications of nesting are creation of carcass furniture, dividing and refining of furniture fronts, construction of frame furniture and creation of components for the caravan constructions and for the structural facings sector. Various

possibilities for the automation of the material handling ensure a high time saving and an even more effective work. Cutting-optimized processing and splitting of plate-shaped materials is child‘s play with the CENTATEQ N-800 Edition25.

ALL IN – TECHNOLOGY Concept 1: Automatic infeed and outfeed table size 2.250 x 3.100 mm / 7 x 10 feet

· 16 kW liquid-cooled spindle · Unit interface for C-axis · Air cushion table function (option) - easy handling of the board

· Cut Rite included · Full software package · Also as concept 1R, 2, 3R or 3 (level of automation: infeed, outfeed, labeling)

ALL IN – DIGITAL








HOMAG Edition25 Nesting

CENTATEQ N-800 EDITION25

Working field width (mm/feet) 2,250/7

Working field length (mm/feet) 3,100/10

Working field height (mm/inch) 125/4,92

Vacuum capacity (m³/h) 3 x 290/345

Vacuum capacity (Hz) 50/60

woodCAD|CAM CENTATEQ N-800 Edition25



· woodCAM module for CENTATEQ N series

· Includes transfer interface to Cut Rite nesting · Maintenance contract for one year


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cnc-gantry-processing-center-centateq-n-800/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-N-800https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



2928 HOMAG Edition25 EdgeHOMAG Edition25 Edge

More Future. More Technology. Full Service. EDGETEQ S-500 Model 2482 Edition25This single-sided machine can be used for gluing edges precisely and perfect finish processing – with a feed speed of up to 25m/min. The Edition25 package, including basic and additional equipment, digital solutions and service,

offers processing quality at the highest level as well as high productivity plus safety. Benefit from the functions, which only HOMAG has to offer.

ALL IN – TECHNOLOGY The basic machine of this Edition25 model is EDGETEQ S-500 model 2482. It contains the following in addition to the basic equipment:

· Solid wood package to process strips up to 20 mm · High gloss package to process workpieces with (e. g. high gloss) and without a film coating by automatic change

· Performance3 package for automatic change between three different radii, including a tracer roller with variable diameter and rolling side tracing on the profile trimming unit FK30

· Minimum workpiece length of 120 mm for an extended parts range

· Automatic two-slot magazine for easy automatic change between two different roller edges

· Sliding carriage to guide narrow parts safely in transverse operation

ONLY AVAILABLE AT HOMAG

· Automatic glue joint scraper fine adjustment · Diameter adjustable tracer roller at the profile trimming unit · Rolling side tracing at the profile trimming unit

ALL IN – DIGITAL

· „MachineBoard“* app (free of charge for 5 years): Machine data and status in real time

· „ServiceBoard“* app: Wireless video diagnostics in real time · „DataSave“* (free of charge for 25 weeks): Automatic backup of machine data

· MMR professional – monitoring to optimize production processes


ALL IN – SERVICE„WarrantyPlus 24“ warranty extension up to 24 months starting from the machine acceptance date

· Remote service until 6 pm (CET) · Replacement parts (except wearing parts) · Field service including travel costs · One inspection including travel costs

EDGETEQ S-500 MODEL 2482 EDITION25

Machine length (mm) 9,365

Weight (kg) 4,500

Feed speed (m/min) 16 – 25

Edge thickness (mm) 0.3 – 3

Workpiece thickness (mm) 8 – 60


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/edge-banding-machines-edgeteq-s-500-models-2400-feed-speed-16-25-mmin/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=EDGETEQ-S-500https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

3130 HOMAG Edition25 EdgeHOMAG Edition25 Edge

More Future. More Technology. Full Service. EDGETEQ S-500 Model 2482 AT Edition25This single-sided edge banding machine offers the ideal entry into zero joint technology. It is equipped with the HOMAG zero joint solution airTec, which bonds the edging to the panel using hot air. Basic and additional equipment

as well as service and digital solutions are the same as in the EDGETEQ S-500 Model 2482 Edtion25 on page 28. Your benefit: Processing quality at highest level plus high productivity and safety.

EDGETEQ S-500 MODEL 2482 AT EDITION25

Machine length (mm) 9,365

Weight (kg) 4,550


Edge thickness (mm) 0.3 – 3



ALL IN – TECHNOLOGY The basic machine of this Edition25 model is EDGETEQ S-500 model 2482. It contains the following in addition to the basic equipment:

· Solid wood package to process strips up to 20 mm · High gloss package to process workpieces with (e. g. high gloss) and without a film coating by automatic change

· Performance3 package for automatic change between three different radii, including a tracer roller with variable diameter and rolling side tracing on the profile trimming unit FK30

· Minimum workpiece length of 120 mm for an extended parts range

· Automatic two-slot magazine for easy automatic change between two different roller edges

· Sliding carriage to guide narrow parts safely in transverse operation

· airTec activation unit: Activation of edges with functional layer using hot air in order to bond the edging to the panel (zero joint solution)

ONLY AVAILABLE AT HOMAG

· Automatic glue joint scraper fine adjustment · Diameter adjustable tracer roller at the profile trimming unit · Rolling side tracing at the profile trimming unit

ALL IN – DIGITAL


· „ServiceBoard“* app: Wireless video diagnostics in real time · „DataSave“* (free of charge for 25 weeks): Automatic backup of machine data

· MMR professional – monitoring to optimize production processes




CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/edge-banding-machines-edgeteq-s-500-models-2400-feed-speed-16-25-mmin/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=EDGETEQ-S-500https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



3534 HOMAG Edition25 ReturnHOMAG Edition25 Return

More Future. More Technology. Full Service. LOOPTEQ O-200 Edition25The entry to a comfortable material flow. The LOOPTEQ O-200 Edition25 is the perfect supplement for unilateral edge banding machines as essential support for an economic workpiece return. The production process

will be more efficient, whether batch size 1, batch, or serial production. The LOOPTEQ O-200 Edition25 is excellently suited for customers with small, narrow, and medium-sized workpieces.

LOOPTEQ O-200 EDITION25

Workpiece length (mm) 300 – 2,500

Workpiece width (mm) 50 – 1,450

Workpiece size 4-sided processing*

min. workpiece length (mm)

max. workpiece length (mm)

300 x 300

1,450 x 1,450


Workpiece weight, length 700 mm (kg) max. 50

Mass per unit area (kg/m²) max. 25

Working height (mm) 835 – 960



ALL IN – TECHNOLOGY Extended basic equipment for a better handling of parts and more flexibility:

The belt for turn narrow parts is included in your new LOOPTEQ O-200 Edition25!

· Short and narrow parts can be slightly turned for crosswise processing

· The turn of workpieces is triggered at the following part dimensions:

· Length: 50 – 200 mm · Width: 300 – 800 mm

· Suitable, amongst others, for fronts of drawers

All further features are up to you – so that your new HOMAG return system suits you perfectly.


· Remote service until 6 pm (CET) · Replacement parts (except wearing parts) · Field service including travel costs · 1 inspection including travel costs

*In combination with a HOMAG EDGETEQ series that offers as linked processing machine Edition25 – Warranty Plus

*Larger workpieces can be returned or even fed out at 4-sided processing with manual support during crosswise offset and turning.

CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/return-conveyor-loopteq-o-200/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=LOOTEQ-O-200https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

3736 HOMAG Edition25 ReturnHOMAG Edition25 Return

More Future. More Technology. Full Service. LOOPTEQ O-300 Edition25For a wide spectrum in the material flow. Whether handicraft or industrially oriented production. The LOOPTEQ O-300 Edition25 transports the largest material variety and is indispensable for an economic workpiece

return. It convinces by its high capacity and an especially gentle workpiece handling. The LOOPTEQ O-300 Edition25 is best suited for customers with high material variety - from small and light up to large and heavy workpieces.

LOOPTEQ O-300 EDITION25 LOOPTEQ O-300 EDITION25

Workpiece length (mm) 300 – 2,500 240 – 2,700

Workpiece width (mm) 60 – 800 60 – 1,000

Workpiece size

4-sided processing*

min. workpiece length (mm)

max. workpiece length (mm)

300 × 80

2,000 × 800

240 × 80

2,500 × 1,000

Workpiece thickness (mm) 8 – 60 8 – 80

Workpiece weight (kg) max. 50 max. 50

Mass per unit area (kg/m²) max. 20 max. 20

Working height (mm) 820 – 980 820 – 980

Feed speed (m/min) 8 – 30 8 – 30


ALL IN – TECHNOLOGY Extended basic equipment for a better handling of parts and more flexibility:

The workpiece identification, sensorial is included in your new LOOPTEQ O-300 Edition25!

· Recognition of long as well as light small workpieces · Sensitive surfaces are protected

To support especially when handling large workpieces, you also receive the Lowerable roller gibs for a special price - 50% discount on the list price!

All further features are up to you – so that your new HOMAG return system suits you perfectly.


· Remote service until 6 pm (CET) · Replacement parts (except wearing parts) · Field service including travel costs · 1 inspection including travel costs

*In combination with a HOMAG EDGETEQ series that offers as linked processing machine Edition25 – „WarrantyPlus 24“

*Larger workpieces can be returned or even fed out at 4-sided processing with manual support during crosswise offset and turning.

CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/return-conveyor-loopteq-o-300/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=LOOTEQ-O-300https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



4140 HOMAG Edition25 CNCHOMAG Edition25 CNC

More Future. More Technology. Full Service. DRILLTEQ V-200 Edition25Flexible all-rounder for processing in just 5 m². These versatile machines can be used for drilling, trimming and grooving, offering the ideal solution to save you time, space,

energy and money. They are particularly well-suited to just-in-time production for trade businesses and other small businesses, and for custom production in large companies.

ALL IN – TECHNOLOGY Part output: 300–400 parts per shift

· 13 vertical high-speed drill spindles including quick-change drill system

· 4 horizontal high-speed drill spindles in the X-direction · 2 horizontal high-speed drill spindles in the Y-direction · Groove saw in the X direction, Ø 100 mm · Tool change spindle, 10 kW, HSK 63 · Automatic tool change magazine with four slots · Plausibility check · Length-dependent processing in the X-direction · Full software package including barcode software

ALL IN – DIGITAL








DRILLTEQ V-200 EDITION25

Workpiece length (mm) 200 – 2,500 / 200 – 3,050

Workpiece width (mm) 70 – 850


Total machine weight (kg) ca. 1,580

woodCAD|CAM DRILLTEQ V-200 Edition25


· woodCAM module for DRILLTEC V 200

· Maintenance contract for one year


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/vertical-cnc-processing-centers-drillteq-v-200/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=DRILLTEQ-V-200https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. DRILLTEQ V-500 Edition25Dynamic package for powerful processing in an area of less than 10 m². The DRILLTEQ V-500 Edition25 offers the next generation of compact vertical CNC technology in an area of less than 10 m². There are two powerful configurations available to choose from. Various software options improve

speed and safety during processing. Automate your processes with barcode integration or workpiece return. With the dowel insertion function, you gain considerably more flexibility in your application fields.


ALL IN – variant 1 (Clamex P)

· 15 vertical high-speed drill spindles including quick-change drill system

· 6 horizontal high-speed drill spindles in the X-direction · 4 horizontal high-speed drill spindles in the Y-direction · Groove saw that can be swiveled 0–90°, with groove/routing unit for Clamex P

· Tool change spindle, 10 kW, HSK 63 · Automatic tool change magazine with four slots · Plausibility check · Length-dependent processing in the X-direction · Full software package including barcode software optional with doweling unit and workpiece returning system

ALL IN – variant 2 (Splithead)

· 2x10 vertical high-speed drill spindles including quick-change drill system

· 2x6 horizontal high-speed drill spindles in the X-direction · 2x4 horizontal high-speed drill spindles in the Y-direction · 1x groove saw, can be swiveled 0–90° · Tool change spindle, 10 kW, HSK 63 · Automatic tool change magazine with four slots · Plausibility check · Length-dependent processing in the X-direction · Full software package including barcode software optional with doweling unit and workpiece returning system

DRILLTEQ V-500 EDITION25





ALL IN – DIGITAL








woodCAD|CAM DRILLTEQ V-500 Edition25


· woodCAM module for DRILLTEC V 200



CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/vertical-cnc-processing-center-drillteq-v-500/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=DRILLTEQ-V-500https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. DRILLTEQ H-600 Edition25The DRILLTEQ H-600 Edition25 has impressed by speed and precision – in workpiece handling as well as in processing. Every drill is executed with an extreme repeat accuracy. The same applies to routing and grooving operations. The workpiece surfaces are perfectly protected despite extremely

high processing speeds. The possibility to process two workpieces simultaneously leads to extreme efficiency and the varied connection possibilities of the machine provide extreme flexibility.


· 2x36 vertical high-speed drill spindles including quick-change drill system

· 2x8 horizontal high-speed drill spindles in the X-direction · 2x2 horizontal high-speed drill spindles in the Y-direction · 2x groove saw, can be swiveled 0–90° · 2x ETP 6 kW routing spindle · Processing up to 3100 mm · Pre-positioning (optional) · Processing of different workpieces from the top/bottom · Full software package including barcode software

ALL IN – DIGITAL








DRILLTEQ H-600 EDITION25






CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cnc-processing-center-drillteq-h-600/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=DRILLTEQ-H-600https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. CENTATEQ P-110 Edition25Freestyle technology with 4- and 5-axis solutions. This series offers high levels of performance and versatility to small and medium-sized carpentry and joinery companies. The new machine concept is based on compact technology, a reduced installation area and operation directly at the

machine. The CENTATEQ P-110 Edition25 includes 4- and 5-axis solutions for the processing of kitchen, office and solid wood furniture, as well as for the construction of stairs, windows and doors.

ALL IN – TECHNOLOGY

· Equipment packages: DRIVE5CS 12 kW Future and 4-axis performance in length M

· Console table with LED setup aid — the quickest and most flexible way to equip a table with suction units

· Freely accessible from all sides with no additional fences · Convenience package with controls for the main functions directly on the enclosure and zone scanner for safety

· Complete software package for programming and simulation · Complete software package for programming and simulation of the machine (Control+)

ALL IN – DIGITAL








CENTATEQ P-110 EDITION25

Workpiece length (mm) 3,100

Workpiece width (mm) 1,550

Workpiece thickness (mm) 160

woodCAD|CAM CENTATEQ P-110 Edition25



· woodCAM module for CENTATEQ P series



CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cnc-processing-center-centateq-p-110/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-P-110https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

4948

More Future. More Technology. Full Service. CENTATEQ P/E-300 Edition25Creating your perfect and individual machine with attractive Edition25 equipment. The machines of the CENTATEQ P/E-300 Edition25 series are all-rounders of CNC-processing:

You can count on stable moving gantry design construction in connection with proven processing units and components. Sturdy and reliable technology – see for yourself.


· Equipment package DRIVE5C 12 kW Future with linear changer

· Also available in an E-300 version with powerEdge gluing technology


· Convenience package with controls for the main functions directly on the enclosure and zone scanner for safety

· PC87 machine operation and slot assignment · Complete software package for programming and simulation of the machine (Control+) including PC87 software for machine operation and slot assignment

ALL IN – DIGITAL









Workpiece length (mm) 4,200









HOMAG Edition25 CNCHOMAG Edition25 CNC

CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/processing-centers-centateq-p-300/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-P300https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. CENTATEQ P/E-310 Edition25Operation made easy: Working on a CNC machine has never been so easy and convenient. All of the essential functions are directly in view and mounted directly on the machine. Thanks to the large window everything is always in view.

Access to the table is free, no disturbing fences are required to the left and right. Fully implemented bumpers combine productivity, security and access to the machine.


· Equipment package DRIVE5C 12 kW Future with linear changer




· PC87 machine operation and slot assignment · Complete software package for programming and simulation of the machine (Control+) including PC87 software for machine operation and slot assignment

ALL IN – DIGITAL









Workpiece length (mm) 3,300 | 4,200 | 6,000









CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/processing-centers-centateq-p-310/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-P-310https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact


More Future. More Technology. Full Service. CENTATEQ P/E-500 Edition25Your choice in CNC machining for demanding production requirements. Stairs, furniture, windows, doors, interior fittings – the machines in our CENTATEQ P/E-500 Edition25 series provide you with the optimum equipment for all of your

work. Each of these CNC machines is a complete system, ensuring maximum performance and efficiency to fulfil your customers‘ individual requirements. Experience the versatility and performance of our systems for yourself.


· Equipment: DRIVE5C+ 15 kW, 18-slot changer, and drilling gear V17H4S 0/90°


· For processing up to 1.900 mm · Console table with LED setup aid — the quickest and most flexible way to equip a table with suction units.


· Complete software package for programming and simulation of the machine (Control+)

· PC87 machine operation and slot assignment

ALL IN – DIGITAL








CENTATEQ P/E 500 EDITION25

Workpiece length (mm) 3,300 – 7,400









CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/centateq-p-500600-e-500-processing-centers/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=CENTATEQ-P-500https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

5554 HOMAG Edition25 woodCAD|CAMHOMAG Edition25 woodCAD|CAM

More Future. More Technology. Full Service. woodCAD|CAM Edition25Even shorter delivery times? Increasingly individualized requests? With the woodCAD|CAM 3D software, you can stay flexible and deliver your customers the high quality they demand. Because a software solution can best support your work when it covers everything: Planning and presentation,

design and manufacture. It must allow changes at any time, in order to react to new requirements during the process. Based on proven CAD/CAM technology, you can achieve a work preparation time saving of up to 70% with woodCAD|CAM.

woodCAD|CAM CENTATEQ N Edition25


· Add-On woodCAD Process · woodCAM module für CENTATEQ N

· Incl. transfer interface to SchnittProfi(t)- Nesting

· 1 year of maintenance

woodCAD|CAM CENTATEQ P Edition25


· Add-On woodCAD Process · woodCAM module for CENTATEQ P


woodCAD|CAM DRILLTEQ V Edition25


· woodCAM module for DRILLTEQ V 200


Features:

· Simple 3D layout planning due to guided architectural modules

· Integrated module for photo-realistic presentation allows a realistic presentation of the room

· Flexible shopping cart and direct calculation of manufacturing costs allow a flexible offer preparation

· Speeded-up 3D design due to furniture-specific assistants · Intelligent fitting technology: intelligent handling using connector characteristics and automatic adjustment of fittings in case of design changes

· Data generation for production at the push of a button, e.g. part lists, item lists, CNC-data are automatically generated and tools are automatically allocated


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cadcam-system-for-furniture-and-interior-design-woodcadcam/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=woodCADCAMhttps://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



5958 HOMAG Edition25 MouldingHOMAG Edition25 Moulding

More Future. More Technology. Full Service. MOULDTEQ M-300 Edition25Prepared for the future. With the MOULDTEQ M-300 Edition25 the times of the push buttons are over. The planer combines state-of-the-art technology with solid mechanical

engineering. In this way, you get intuitive machine operation and maximum quality in one machine and you will be optimally prepared for the future.


· Windows package for leveling on four sides + detaching and profiling the glass fixing rail

· Optimum surface quality thanks to variable spindle speed and feed rate

· High level of precision thanks to solid cast iron stand tool clamping system

· Rapid tool changes thanks to ProLock® tool clamping system

· Intuitive user guidance with profile preview and tool database · Automatic positioning of all relevant spindles for better ease of use, more speed and ideal replicability

· Each spindle with own motor for a better power transmission

ALL IN – DIGITAL


· ServiceBoard* App Wireless video diagnosis in real time with the Service Partner

· DataSave* (25 weeks free of charge) Automatic saving of machine data





MOULDTEQ M-300 EDITION25

Workpiece width (mm) 10 – 250


Workpiece length (mm) 300 without gap / 800 with gap

Number of spindles 6

Spindle arrangement Bottom, right, left, top, top,

bottom


Speed of trimming tool

(pro min)

var. 4,000 – 8,000


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/planing-and-moulding-machine-mouldteq-m-300/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=MOULDTEQ-M-300https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

6160 HOMAG Edition25 SandingHOMAG Edition25 Sanding

More Future. More Technology. Full Service. SANDTEQ W-300 Edition25Calibration, veneer sanding and lacquer sanding including high gloss. This series offers an all-round solution for small and medium-sized carpentry and joinery companies. Choose from seven sanding units for a configuration to suit you

and fulfil every sanding requirement from calibration to high gloss. Drive outputs of up to 30 kW are available to suit your requirements. This series also features automatic unit locking for safety and convenience.


· All functions combined in one machine: calibration, fine sanding, transverse sanding, super-finish, interim polishing

· Can be used universally for veneer, solid wood, timber materials, paint

· MPS 2.0 plus — the magnetic pressure beam system · Patented HOMAG X unit

ALL IN – DIGITAL








SANDTEQ W-300 EDITION25

Number of units 2

Working width (mm/Inch) 1,350/53"

Sanding belt width (mm/Inch) 1,370/54"

Sanding belt length (mm/Inch) 2,620/103"

Workpiece thickness min. – max.

(mm/Inch)

3 – 160/0,125 – 7"

Length (mm) 1,665

Width (mm) 2,100

Height (mm) 2,020 - 2,415

Weight approx.(kg) 3,000


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/wide-belt-sanding-machines-sandteq-w-300/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SANDTEQ-W-300https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

6362 HOMAG Edition25 PaintingHOMAG Edition25 Painting

More Future. More Technology. Full Service. SPRAYTEQ S-100 Edition25From manual spray coating to automated finishing equipment. Trends change, often within short periods of time. However, the demand of many end customers for high-quality furniture surfaces remains. As a manufacturer, the best way to meet your customers’ demand for first-class furniture and well-made interior fittings is with spray coated

surfaces. Whether you manufacture furniture, kitchens, interior fittings, stair components or doors and no matter whether they are made of solid wood or wood-based panels: With the SPRAYTEQ S-100 Edition25 spraying machines, HOMAG offers you the suitable entry into high-quality finished surfaces.


· Very compact machine – due to integrated switch cabinet · Cost reduction – due to paint savings (reduced overspray) · Precision parts detection · Large suction volume and optimal air supply · Large filters for long service life · Short fluid circuits · High standard of surface quality – due to industrial technology in the small trade

· Process stability – due to easy setup independent of the operator (reproducipility)

· High flexibility — batch size 1, quick color change · Trusted, established, high-quality spraying technology

ALL IN – DIGITAL


· „ServiceBoard“* app: Wireless video diagnostics in real time




SPRAYTEQ S-100 EDITION25

Feed speed (m/min) 1 - 4.5 for painting operation

1 - 10 for reverse operation

Workpiece transport: Workpieces are transported

through the machine lying on

trays




Materials Water and solvent-based paints

Processing height (mm) 900


CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/spray-coating-machine-sprayteq-s-100/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=SPREYTEQ-S-100https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



6766 HOMAG Edition25 Beam processingHOMAG Edition25 Beam processing

More Future. More Technology. Full Service. BEAMTEQ B-540 Edition25Economical joinery with high flexibility. The compact design and the wide range of applications make this carpentry machine the ideal solution for small and medium-sized carpentry companies. With a low investment volume, the

BEAMTEQ B-540 Edition25 allows you to perform a wide variety of machining operations with the highest precision. You will produce economically and in high quality.

BEAMTEQ B-540 EDITION25

Saw blade diameter (mm) 555

Rotating angle (°) 0-360

Swivel angle (°) 0-90

Suction volume (m³/h) 1,800

Power requirement sawing unit (kW) 20

Speed per processing (sec) 2-10

Position accuracy of the gripper (mm) +/- 0,01

Cross section min. (mm) 20x50

Cross section max. (mm) 200x455

Support height (mm) 860


· Little space requirement due to closed and compact cabin · Beam carrier at the infeed and outfeed gripper: the highly dynamic and safe component transport guarantees high precision in all processing

· Easy maintenance due to central lubrication and easy access · User-oriented navigation: intuitive operating system powerTouch and integrated sound insulation

· Conveyor belt or waste separation pusher: sorting and removal of material and waste parts directly in the machine

· Beam removal with support table for the automatic outfeed and crosswise feed of the processed beams

· 5-axis technology for routing, sawing, drilling · Individually equipped 8 position tool changer · Pickup station for saw blade change

ALL IN – DIGITAL









CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/carpentry-machine-beamteq-b-540/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=BEAMEQ-B-540https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

6968 HOMAG Edition25 Beam processingHOMAG Edition25 Beam processing

More Future. More Technology. Full Service. BEAMTEQ B-560 Edition25High performance beam processing. With this carpentry machine, you have a machine at your disposal that leaves almost nothing to be desired. The 12-position tool changer optimizes your existing applications and makes the machine

highly flexible for wood processing in cutting timber frame and prefabricated house construction as well as roof trimming. The BEAMTEQ B-560 Edition25 handles all machining operations at the highest speed.


· Little space requirement due to closed and compact cabin · Beam carrier at the infeed and outfeed gripper: the highly dynamic and safe component transport guarantees high precision in all processing

· Easy maintenance due to central lubrication and easy access · User-oriented navigation: intuitive operating system powerTouch and integrated sound insulation

· Conveyor belt or waste separation pusher: sorting and removal of material and waste parts directly in the machine

· Beam removal with support table for the automatic outfeed and crosswise feed of the processed beams

· 5-axis technology for routing, sawing, drilling · Large area of application due to 12 position tool changer: short set-up times due to fast equipping

· High speed due to a second integrated main spindle: shortened processing times, since no replacement of the saw blade is necessary

ALL IN – DIGITAL









BEAMTEQ B-560 EDITION25

Saw blade diameter (mm) 555

Rotating angle (°) 0-360

Swivel angle (°) 0-90

Suction volume (m³/h) 3,000

Power requirement sawing unit (kW) 20

Spped per processing (sec) 2-10

Position accuracy of the gripper (mm) +/- 0,01

Cross section min. (mm) 20x50

Cross section max. (mm) 200x455

Support height (mm) 860

CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/carpentry-machine-beamteq-b-560/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=BEAMTEQ-B-560https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

Benefit now!


16.07.-31.05.2019



7372 HOMAG Edition25 PackingHOMAG Edition25 Packing

More Future. More Technology. Full Service. PAQTEQ C-200 Edition25Accurately fitting packages, tightly calculated. Produce with your cardboard-box cutting machine PAQTEQ C-200 Edition25 an individual packaging for each product, with maximum product protection, just-in-time,

cost-efficient and sustainable. Where today still packaging is stored tomorrow already revenues may be produced. So, the times of pre-assembled cardboards, that often do not fit correctly, have passed.

PAQTEQ C-200 EDITION25

CARDBOARD FEATURES

Length of cardboard (outfeed) (mm) min. 300

Width of cardboard (infeed) (mm)

Single sheet 350 – 2,500

Endless cardboard single 350 – 2,500

Endless cardboard side-by-side max. 2,350

Stacking height incl. 120 mm pallets (mm) 2,150

Cardboard thickness (mm) 2,0 – 7,0 +/- 0,2

Cardboard quality according to

DIN 55468 (mm)

1-corrugation, quality: 1.10 – 1.40 (mm)

2-corrugation, quality: 2.10 – 2.30 (mm)

Thickness up to ca. 4,0


Packaging designs vksshop.com



MACHINE DIMENSIONS / CONNECTED VALUES

Working height (mm) 900

Weight (kg) ca. 2,500

Operating pressure (bar) 6

Air consumption ca. 20 - 100 NL/min (depending on the

cycle capacity used / type of cardboard

and/or dimension of cardboard)

Operating voltage 400 V, 50 Hz 3 Ph./N/PE

(with loadable zero conductor)

Connected load (kW) 4,5

Nominal current (A) 6,5

max. per-fuse (A) 16

ALL IN – TECHNOLOGY Extended basic equipment for more flexibility and capacity:

The Flatrate online shop for 12 months is included in your new PAQTEQ C-200 Edition25! So, you get free access to all packaging designs available and tested in the shop (vksshop.com).

· More than 230 packaging designs to choose from · All box types tested and immediately available in the PAQTEQ C-200 Edition25

· Detailed description of type and performance by means of a reference box

· Automatic updates of existing box types during download

· For higher performance of you cardboard-box cutting machine you receive the additional pair of tools for a special price - 50% discount on the invoice price!

· 6 longitudinal tools and 1 transversal tool are already included in the basic machine

· The existent cutting tools can be added by an additional 7th and 8th longitudinal tool

All further features are up to you – so that your new HOMAG cardboard-box cutting machine suits you perfectly.

ALL IN – DIGITAL








CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cardboard-box-cutting-machine-paqteq-c-200/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=PAQTEQ-C-200https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

7574 HOMAG Edition25 PackingHOMAG Edition25 Packing

More Future. More Technology. Full Service. PAQTEQ C-250 Edition25Every packaging as a custom-made suit. Using the cardboard-box cutting machine you will exactly produce the packaging that you need - in optimal shape, with high volume utilization degree, and with minimum unit cost. Performance

and quality are raised when compared to manual packaging. The best: design your PAQTEQ C-250 Edition25 to your own specific needs and requirements.



CARDBOARD FEATURES

Length of cardboard (outfeed) (mm) min. 300

Width of cardboard (infeed) (mm)

Single sheet 350 – 2,500

Endless cardboard single 350 – 2,500

Endless cardboard side-by-side max. 2,350

Stacking height incl. 120 mm pallets (mm) 2,150

Cardboard thickness 2,0 – 7,0 +/- 0,2

Cardboard quality according to

DIN 55468 (mm)

1-corrugation, quality: 1.10 – 1.40

2-corrugation, quality: 2.10 – 2.30



Kartontypen vksshop.com


MACHINE DIMENSIONS / CONNECTED VALUES

Working height (mm) 900

Weight (kg) ca. 2,500

Operating pressure (bar) 6

Air consumption ca. 20 - 100 NL/min (depending on the

cycle capacity used / type of cardboard

and / or dimension of cardboard)

Operating voltage 400 V, 50 Hz 3 Ph./N/PE

(with loadable zero conductor)

Connected load (kW) 4,5

Nominal current (A) 6,5

max. per-fuse (A) 16

ALL IN – TECHNOLOGY Extended basic equipment for more flexibility and capacity:

The Flatrate online shop for 12 months is included in your new PAQTEQ C-250 Edition25! So, you get free access to all packaging designs available and tested in the shop (vksshop.com).

· More than 230 packaging designs to choose from · All box types tested and immediately available in the PAQTEQ C-250 Edition25

· Detailed description of type and performance by means of a reference box

· Automatic updates of existing box types during download

For higher performance of you cardboard-box cutting machine you receive the Additional pair of tools for a special price - 50% discount on the invoice price!

· 6 longitudinal tools and 1 transversal tool are already included in the basic machine

· The existent cutting tools can be added by an additional 7th and 8th longitudinal tool

All further features are up to you – so that your new HOMAG cardboard-box cutting machine suits you perfectly.

ALL IN – DIGITAL








CLICK BACK TO START

CLICK FOR CONTACT

https://www.homag.com/en/product-detail/cardboard-box-cutting-machine-paqteq-c-250/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=PAQTEQ-C-250https://www.homag.com/en/contact/contactfinder/?utm_source=Campaign&utm_medium=Brochure&utm_campaign=Edition25&utm_content=Contact

77HOMAG Edition25 Warranty Plus

That‘s included:

· Warranty extension starting from machine acceptance to: 24 months or 5,000 h

· „WarrantyPlus 24“ includes: · Remote service until 6 p.m. (CET) · Spare parts (wearing parts excluded) · Field service incl. travel expenses · 1 inspection incl. travel expenses

Advantages:Full Service Package with no extra costs

· Enables accurate cost planning on the part of the customer · Customers are covered against higher costs if service cases arise

· Inspection carried out by certified service technicians of SSC or SSP

24 MONTHS WARRANTY OR 5,000 H

12 MONTHS 12 MONTHS

1X INSPECTION

Edition25 – Warranty Plus

DataSave

ServiceBoard MachineBoard

· Reduce downtime: production data and configuration details of the machine are stored and can easily be recalled via tapio in case of loss

· Automatic backup saves IT costs · Production process reliability · Faster service in case of machine breakdown

· Service Monitoring: You do not have to search for maintenance intervals and comprehensive documen

Documents

More Future. More Technology. Full Service. - HOMAG · 2018. 12. 3. · 12 HOMAG Edition25 Saw HOMAG Edition25 Saw 13 More Future. More Technology. Full Service. SAWTEQ B-130 Edition25