Mono-Tray AluminumandSteel · Mono-Tray® AluminumandSteel Mono-Tray ... MONO - RACK MONO - MESH POWER - TRAY Aluminum and Steel Features and Benefits UL Classified / CSA Certified

Page 180180

Mono-Tray® Aluminum and SteelMono-Tray® is a unique center-hung cable tray system, which provides organization and support for virtually

any cable or wiring installation. Available in both steel and aluminum, Mono-Tray® redefines

labor-saving with its versatile "lay-in feature".

Full side accessibility allows cable to be laid-in,

as opposed to the time consuming,

and potentially damaging, effects of cable

pulling required with conventional trapeze supports.

A full line of quick fittings and accessories are available to complete any installation.

UL Listed, CSA Certified. Available in Steel or Aluminum.

Page Cable Tray Style / Type Max. Width Nema Features

Page 181181

Mono-Tray® Aluminum and Steel

Features and Benefits UL Classified / CSA Certified

Accessory Quick Finder & Hardware Schedule

Load Ratings

Page Cable Tray Style / Type Max. Width Nema Features

65 Mono-Tray® Aluminum 24" (600mm) 12C Durable, all-purpose center-hung tray

66 Mono-Tray® Steel 24" (600mm) 12C Durable, all-purpose center-hung tray

67 Dual-Rail® Aluminum 36" (900mm) 12C Heavy duty 3 compartment tray

68 Dual-Rail® Steel 36" (900mm) 12C Heavy duty 3 compartment tray

69 Wall Rack Aluminum 12" (300mm) 12C Versatile wall-mounted tray

70 Wall Rack Steel 12" (300mm) 12C Versatile wall-mounted tray

69 Wall-Rack Double Tier Aluminum 12" (300mm) 12C Unique two-tiered wall mounted tray with two separate compartments

65 Mono-Tray® Aluminum Removable Rung 24" (600mm) 12C Offers the advantage of removable rungs

69 Wall-Rack Aluminum Removable Rung 12" (300mm) 12C Offers the advantage of removable rungs

65 Mono-Tray® Aluminum “L” Series 24" (600mm) 12B Light-duty center-hung tray for a variety of small project needs

69 Wall-Rack Aluminum “L” Series 12" (300mm) 12B Light-duty wall mounted tray

NOTE: 1. NEMA 12B & 12C classifications are inclusive of NEMA 12A ratings. 2. Refer to page 63 for CSA load rating data.

Accessory Quick Finder

Page Description

80 - 81 Covers and Inserts _ _ _ _- _ 32 _78 Blind End _ _ _ _- _ 40 _79 Drop Out _ _ _ _- _ 41 _75 Splice Connector _ _ _ _- _ 42 _82 Divider Strip _ _ _ _- _ 44 _78 Tray to Box Connector _ _ _ _- _ 45 _79 Conduit Bushing Dropout _ _ _ _- _ 46 _77 Wall Bracket _ _ _ _- _ 47 _74 Offset Connector (Horizontal) _ _ _ _- _ 48 _76 J-Hanger Steel _ _ _ _- _ 51 _82 Ground Strap _ _ _ _- _ 52 _76 Tray to Wall Connector _ _ _ _- _ 54 _72 Quick Tee (Horizontal) _ _ _ _- _ 55 _76 Hanger Items _ _ _ _- _ 56 _76 Stiffener Bars & Seismic Assembly _ _ _ _- _ 56 _77 Outboard Floor Support _ _ _ _- _ 60 _76 J-Hanger Aluminum _ _ _ _- _ 61 _82 Cable Roller _ _ _ _- _ 62 _74 Offset Connector (Vertical) _ _ _ _- _ 63 _74 Quick Tee (Vertical) _ _ _ _- _ 64 _75 Angle Connector (Vertical) _ _ _ _- _ 65 _75 Angle Connector (Horizontal) _ _ _ _- _ 66 _73 Quick Cross _ _ _ _- _ 69 _82 Rung Caps _ _ _ _- _ 71 _76 Wall Plate _ _ _ _- _ 75 _82 Multi-Junction Fittings _ _ _ _- _ 88 _

"6" and "7"Digit of P/N:

Accessory Quick FinderP / N Description Notes:

0800-0533 3/4" Nylon Bushing For use with bushingconnector (P/N:0100-0532)

0100-0700 Wall Spacers For use with wall rack andwall rack double tier

0100-0730 Tooth Clamp For use with divider stripand conduit bushing dropout

0200-0761 1/2" - 20 Split Nut 1/2" - 20 split to attachalong 1/2" threaded rod

0200-0720 "U" Clip (includes: screw,nut and washer)

For use with dropout fittings(aluminum tray only)

0200-0791 12-24 x 7/8" Hex HeadSelf Tapping Screw

For use with removablerungs

0800-0590 6" Long Vinyl Sleeve Used to cover threaded rod(to protect cables)

0100-0780 Aluminum Spine SectionWithout Rungs

12'- 0" (3.6m length)

0200-0780 Steel Spine SectionWithout Rungs

12'- 0" (3.6m length)

0200-0571 3/8"-16 x 2" GR2 HexHead, Zinc Plated Bolt

Complete with: 3/8"-16hex nut and washer

0200-0572 3/8"-16 x 3 1/2" GR2 HexHead, Zinc Plated Bolt






0200-0576 3/8"-16 x 4" GR2 HexHead, Zinc Plated Bolt


TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Mono-Tray ® Aluminum and Steel

Features and Benefits UL Classified / CSA Certified

Accessory Quick Finder & Hardware Schedule

Load RatingsPage Cable Tray Style / Type Max. Width Nema Features

186 Mono-Tray® Aluminum 24" (600mm) 12C Durable, all-purpose center-hung tray

187 Mono-Tray® Steel 24" (600mm) 12C Durable, all-purpose center-hung tray

188 Dual-Rail® Aluminum 36" (900mm) 12C Heavy duty 3 compartment tray

189 Dual-Rail® Steel 36" (900mm) 12C Heavy duty 3 compartment tray

190 Wall Rack Aluminum 12" (300mm) 12C Versatile wall-mounted tray

191 Wall Rack Steel 12" (300mm) 12C Versatile wall-mounted tray

189 Wall-Rack Double Tier Aluminum 12" (300mm) 12C Unique two-tiered wall mounted tray with two separate compartments

186 Mono-Tray® Aluminum Removable Rung 24" (600mm) 12C Offers the advantage of removable rungs

190 Wall-Rack Aluminum Removable Rung 12" (300mm) 12C Offers the advantage of removable rungs

186 Mono-Tray® Aluminum “L” Series 24" (600mm) 12B Light-duty center-hung tray for a variety of small project needs

189 Wall-Rack Aluminum “L” Series 12" (300mm) 12B Light-duty wall mounted tray

NOTE: 1. NEMA 12B & 12C classifications are inclusive of NEMA 12A ratings. 2. Refer to page 182 for CSA load rating data.

Accessory Quick Finder

Page Description

200 - 201 Covers and Inserts _ _ _ _- _ 32 _ 198 Blind End _ _ _ _- _ 40 _ 199 Drop Out _ _ _ _- _ 41 _ 195 Splice Connector _ _ _ _- _ 42 _ 202 Divider Strip _ _ _ _- _ 44 _ 198 Tray to Box Connector _ _ _ _- _ 45 _ 199 Conduit Bushing Dropout _ _ _ _- _ 46 _ 197 Wall Bracket _ _ _ _- _ 47 _ 196 Offset Connector (Horizontal) _ _ _ _- _ 48 _ 196 J-Hanger Steel _ _ _ _- _ 51 _ 202 Ground Strap _ _ _ _- _ 52 _ 196 Tray to Wall Connector _ _ _ _- _ 54 _ 192 Quick Tee (Horizontal) _ _ _ _- _ 55 _ 196 Hanger Items _ _ _ _- _ 56 _ 196 Stiffener Bars & Seismic Assembly _ _ _ _- _ 56 _ 197 Outboard Floor Support _ _ _ _- _ 60 _ 196 J-Hanger Aluminum _ _ _ _- _ 61 _ 194 Offset Connector (Vertical) _ _ _ _- _ 63 _ 194 Quick Tee (Vertical) _ _ _ _- _ 64 _ 195 Angle Connector (Vertical) _ _ _ _- _ 65 _ 195 Angle Connector (Horizontal) _ _ _ _- _ 66 _ 193 Quick Cross _ _ _ _- _ 69 _ 202 Rung Caps _ _ _ _- _ 71 _ 196 Wall Plate _ _ _ _- _ 75 _

"6" and "7"Digit of P/N:

Accessory Quick FinderP / N Description Notes:

0800-0533 3/4" Nylon Bushing For use with bushingconnector (P/N:0100-0532)

0100-0700 Wall Spacers For use with wall rack andwall rack double tier

0100-0730 Tooth Clamp For use with divider stripand conduit bushing dropout

0200-0761 1/2" - 20 Split Nut 1/2" - 20 split to attachalong 1/2" threaded rod

0200-0720 "U" Clip (includes: screw,nut and washer)

For use with dropout fittings(aluminum tray only)

0200-0791 12-24 x 7/8" Hex HeadSelf Tapping Screw

For use with removablerungs

0800-0590 6" Long Vinyl Sleeve Used to cover threaded rod(to protect cables)

0100-0780 Aluminum Spine SectionWithout Rungs

12'- 0" (3.6m length)

0200-0780 Steel Spine SectionWithout Rungs

12'- 0" (3.6m length)

0200-0571 3/8"-16 x 2" GR2 Hex Head, Zinc Plated Bolt








0200-0576 3/8"-16 x 4" GR2 Hex Head, Zinc Plated Bolt


Page 182182

Ordering Summary Guide Quick Selector

CSA Load Ratings

Example Catalog NumberBottom Rung Mono-Tray Aluminum, 3" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

TRAY STYLE TRAY TYPE MATERIAL RUNG SPACING RUNG HEIGHT TRAY LENGTH TRAY WIDTH RUNG STYLE

B 1 1 5 3 1 _0 3 2

B

L

LB

CB

BottomRung Tray

L-SeriesTop Rung

L-SeriesBottom Rung

4" HighSpine

1

2

6

9

Mono-Tray(Ladder)

Dual-Rail

Wall-Rack

Wall-RackDouble-Tier

1

2

3

4

5

6

Aluminum

Pre-GalvanizedSteel

Hot DippedGalvanizedSteel afterFabrication

Epoxy Paint(Aluminum)

Epoxy Paint(Steel)

AnodizedAluminum

R

D

RD

B

Removable1/2" (12mm)Type "C" Rung

3/4" (19mm)Type "D" Rung

Removable3/4" (19mm)Type "D" Rung

"B" Rung

6"

9"

12"

18"

3"

4"

150

225

300

450

75

100

1

2

3

4

5

6

in mm

6"

9"

12"

18"

24"

36"

3"

4"

30"

150

225

300

450

600

900

75

100

750

1

2

3

4

5

6

7

8

9

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m

CSA LOAD RATING

CSALoad Class

Product LineMaximum

Rung Spacing RungStyle

MaximumTray Width

"L"-Series Mono-Tray® Aluminum 12 300 12 A, B300"L"-Series Wall-Rack Aluminum 6 150 12 A, B300

Mono-Tray® Aluminum 24 600 6 B, C150Mono-Tray® Aluminum 12 300 12 B300Mono-Tray® Aluminum 9 230 18 B450Wall-Rack Aluminum 12 300 6 C, D150

Wall-Rack Steel 12 300 6 E150Mono-Tray® Aluminum 12 300 12 B300Mono-Tray® Aluminum 18 450 9 C230Mono-Tray® Aluminum 24 600 6 C150Mono-Tray® Aluminum 24 600 12 D300

Mono-Tray® Steel 24 600 12 E300Dual-Rail® Aluminum 36 900 12 C300

Dual-Rail® Steel 36 900 12 E300

in mm in mm

A37Kg/m/3m

C197Kg/m/3m

D1179Kg/m/3m

E299Kg/m/3m

Mono-Tray® Aluminum and Steel

3" Rung spacing notavailable with "L"

Series Tray.

Page 183183

Product Reference Installation

Wall RackTray to Box Connector

Double Tier Wall Rack

HorizontalQuick Cross

Dropout

Vertical Angle Connector

Dual Rail

Splice Connector

Horizontal Pivot

Vertical Pivot

Horizontal Quick Tee

Vertical Offset

Mono-Tray

Tray to WallBlind End

Horizontal Offset

Vertical Quick Tee

Horizontal Quick Tee

Floor Supports

Covers & Inserts

Typical AluminumMono-Tray Connector Installation Typical Steel Mono-Tray Connector Installation

1/2" (12mm) Threaded Rod(by others)

1/2" (12mm) Threaded Rod(by others)

Mono-Tray® Aluminum and SteelT

RO

UG

HT

RA

YC

EN

TE

RS

PIN

EM

ON

O-

RA

CK

MO

NO

-M

ES

HP

OW

ER

-T

RA

Y

Page 184184

Mono-Tray® CB Series Aluminum Tray System

Unique Device Bracket Provides means ofmouting wiring devices at the cable tray.This method allows greater flexibility withthe location of communication drops, andprovides ease of relocation.

★NEW CB Style Tray - A Modular approach to wiring.

"D" Rung(Optional)

CBDB-431

4” High spine creates an intrinsic barrierwhich creates two generous compartmentswithin the cable tray system. Center hungdesign eliminates the need to pull delicatecommunication cabling.

4" H Spine

Page 185185

Mono-Tray® CB Series Aluminum Tray SystemT

RO

UG

HT

RA

YC

EN

TE

RS

PIN

EM

ON

O-

RA

CK

MO

NO

-M

ES

HP

OW

ER

-T

RA

Y

6 150 CB111(*)-03219 225 CB112(*)-0321

12 300 CB113(*)-032118 450 CB114(*)-03216 150 CB111(*)-03229 225 CB112(*)-0322

12 300 CB113(*)-032218 450 CB114(*)-03226 150 CB111(*)-03239 225 CB112(*)-0323

12 300 CB113(*)-032318 450 CB114(*)-03236 150 CB111(*)-03249 225 CB112(*)-0324

12 300 CB113(*)-032418 450 CB114(*)-03246 150 CB111(*)-03259 225 CB112(*)-0325

12 300 CB113(*)-032518 450 CB114(*)-0325

Catalog NumbermminRung Spacing

mminActual Width (AW)

Width

CB1 STYLE TRAY

191

267

343

450

600

7.5

10.5

13.5

18

24

6

9

12

18

24

Dimensional / Ordering Data

(*): Insert Rung Height: 3=3” (75), 4=4” (100), 6=6” (150)

CB1 Style Tray

6 150 CB211(*)-03249 225 CB212(*)-0324

12 300 CB213(*)-032418 450 CB214(*)-03246 150 CB211(*)-03259 225 CB212(*)-0325

12 300 CB213(*)-032518 450 CB214(*)-03256 150 CB211(*)-03299 225 CB212(*)-0329

12 300 CB213(*)-032918 450 CB214(*)-03296 150 CB211(*)-03269 225 CB212(*)-0326

12 300 CB213(*)-032618 450 CB214(*)-0326


mminActual Width (AW)

Width

CB2 STYLE TRAY

450

600

750

900

18

24

30

36

18

24

30

36


CB2 Style Tray

6 150 CBA211(*)-03249 225 CBA212(*)-0324

12 300 CBA213(*)-032418 450 CBA214(*)-03246 150 CBA211(*)-03259 225 CBA212(*)-0325

12 300 CBA213(*)-032518 450 CBA214(*)-03256 150 CBA211(*)-03299 225 CBA212(*)-0329

12 300 CBA213(*)-032918 450 CBA214(*)-03296 150 CBA211(*)-03269 225 CBA212(*)-0326

12 300 CBA213(*)-032618 450 CBA214(*)-0326


mminSide (L)Rail Spacing (S)

Width

CB2 STYLE TRAY

100

178

150

225

4

7

6

9

mmin

178

178

380

380

7

7

15

15

Actual Width (W)mmin

450

600

750

900

12.5

15.5

22.5

25.5

11

14

21

24


CBA Style Tray

Page 186186

Example Tray Catalog NumberBottom Rung Mono-Tray Aluminum, 6" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

B 1 1 1 3 1 _0 3 2

TRAY STYLE MATERIAL RUNG SPACING RUNG HEIGHT TRAY LENGTH TRAY WIDTH RUNG STYLE

B

L

LB

BottomRung Tray

Light DutyTray

L-SeriesBottom Rung

1

4

6

Aluminum


AnodizedAluminum

R

D

RD

B




"B" HollowRung

6"

9"

12"

18"

3"

4"

150

225

300

450

75

100

1

2

3

4

5

6

in mm

6"

9"

12"

18"

24"

3"

4"

150

225

300

450

600

75

100

1

2

3

4

5

7

8

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m

For Top RungStandard Spine Tray

No Letter Prefixis required.

For Standard Type “C”Aluminum Fixed Rung.

No Letter Suffixis required.

Removable Rung is notavailable for Double Tier.

3" R.S. for StandardTray Only. Not

available in "L" Series

18" R.S. only for6" & 9" widths.

12" R.S. only for6", 9" & 12" widths.

"C" Rung(Standard)

"B" Rung(Light Duty)

"D" Rung(Optional)

Mono-Tray® Aluminum

Material Data - Aluminum

Design Data

Ordering Data

One splice connector (p/n: 0100-0420) is provided with each tray length.

Support SpanSpineType

Deflection NEMA Rating

SPINE DEFLECTION @ 100#/ft (149kg/m)

12 3.6 2.8 71 12Cft m in mm (1.5 Safety Factor)

12Standard

Light 3.6 3.4 86 12B

Mono-TrayAluminum

Mono-TrayAluminum

Removable Rung

Spine(Standard Tray)

Spine(Light Duty Tray)

BOTTOM RUNGWIDTH CHART

(ALUMINUM TRAY)

6 7.5 19110.5 26713.5 34318 45024 600

WBW

in mm

9121824

(See Chart)

Note: Removable Rungutilizes screw attachment

CSACertified

Page 187187

Example Tray Catalog NumberBottom Rung Mono-Tray Steel, 6" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

B 1 2 1 3 10 3 2

TRAY STYLE MATERIAL RUNG SPACING RUNG HEIGHT TRAY LENGTH TRAY WIDTH

B BottomRung Tray

2

4

5

Pre-GalvSteel

HDGAF

Epoxy Paint(Steel)

6"

9"

12"

150

225

300

1

2

3

in mm

6"

9"

12"

18"

24"

150

225

300

450

600

1

2

3

4

5

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m



3.0 Meter Lengthfor use in Canada

Mono-Tray® Steel

Material Data - Steel

Design Data

Ordering Data


Rung(Standard)

Rung Caps OptionalOrder separately



STEEL SPINE DEFLECTION @ 100#/ft (149kg/m)


Standard

BOTTOM RUNGWIDTH CHART(STEEL TRAY)

6 7.5 19110 25413 33018 45024 600

WBW

in mm

9121824

Spine(Standard)

CSACertified

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 188188

ft m in mm (1.5 Safety Factor)

12 3.6 2.25 71 12C

Spine Deflection @150 lbs/ft (223Kg/m)Support Span Deflection NEMA Rating

Spine Type

Standard

Dual-Rail® Aluminum


Design Data

Ordering Data

Type C & Type D rungs feature box beam design for additional strength.



"C" Rung(Standard)

"D" Rung(Optional)

Standard Spine

Note: Removable Rungutilizes screw attachment

Example Tray Catalog NumberBottom Rung Dual-Rail Aluminum, 6" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

B 2 1 1 3 1 _0 3 2

TRAY STYLE MATERIAL RUNG SPACING RUNG HEIGHT TRAY LENGTH TRAY WIDTH RUNG STYLE

B BottomRung Tray

1

4

6

Aluminum


AnodizedAluminum

D 3/4" (19mm)Type "D" Rung

6"

9"

12"

18"

150

225

300

450

1

2

3

4

in mm

18"

24"

36"

30"

450

600

900

750

4

5

6

9

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m





3.0 meter length foruse in Canada.

TrayWidth

RungSpacing

R

369

12

75150225300

in in mm

RailSpacing

S

7777

178178178178

in mm

SideSpacing

L

4444

100100100100

in mm

18

Top RungActual Width

TWTop RungCatalogNumber

Bottom RungActual Width

BWBottom Rung

CatalogNumber

18 450 18 450

2153-0324 B2153-03242113-03242123-03242133-0324

B2113-0324B2123-0324B2133-0324

369

12

75150225300

7777

178178178178

7777

178178178178

24 24 600 24 600

2153-0325 B2153-03252113-03252123-03252133-0325

B2113-0325B2123-0325B2133-0325

369

12

75150225300

15151515

380380380380

6666

150150150150

30 30 750 30 750

2153-0329 B2153-03292113-03292123-03292133-0329

B2113-0329B2123-0329B2133-0325

369

12

75150225300

15151515

380380380380

9999

225225225225

36 36 900 36 900

2153-0326 B2153-03262113-03262123-03262133-0326

B2113-0326B2123-0326B2133-0326

TOP RUNG TRAY BOTTOM RUNG TRAY

in mm in mm

DUAL-RAIL ® ALUMINUM

CSACertified

Page 189189

Dual-Rail® Steel


Design Data

Ordering Data

Two splice connectors (p/n: 0200-0420) are provided with each tray length.

Rung(Standard)






Standard

Spine(Standard)

TRAY DIMENSION CHART(STEEL DUAL-RAIL)

18 7 1777 17715 38015 380

WL

in mm

4.5 1007.5 1786.5 1509.5 225

Sin mm

243036

Example Tray Catalog NumberBottom Rung Dual-Rail Steel, 6" Rung Spacing, 3" High, 12"-0" Length, 18" Wide

B 2 2 1 3 40 3 2


B BottomRung Tray

2

3

5

Pre-GalvSteel

HDGAF

Epoxy Paint(Steel)

6"

9"

12"

150

225

300

1

2

3

in mm

18"

24"

36"

30"

450

600

900

750

4

5

6

9

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m




CSACertified

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 190190

Example Tray Catalog NumberBottom Rung Wall-Rack Aluminum, 3" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

B 6 1 5 3 1 _0 3 2

TRAY STYLE TRAY TYPE MATERIAL RUNG SPACING RUNG HEIGHT TRAY LENGTH TRAY WIDTH RUNG STYLE

B

L

LB

BottomRung Tray

Light DutySpine

Light DutyBottomRung

6

9

Wall-Rack

Wall-RackDouble-Tier

1

4

6

Aluminum


AnodizedAluminum

R

D

RD

B




"B" HollowRung

6"

9"

12"*

3"

150

225

300

75

1

2

3

5

in mm

6"

9"

12"

3"

150

225

300

75

1

2

3

7

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m





Removable Rungis not available for

Double Tier.

* 12" Rung Spacingis available for 3"

and 6" tray width only.

Double Tier availablein 6" and 9" Rung

Spacing only.

Wall-Rack Aluminum


Design Data

Ordering Data

One splice connector (p/n: 0100-0420) is provided with each tray length. Three wall spacers are included with each length.

"C" Rung(Standard)

"B" Rung(Light Duty)

"D" Rung(Optional)



SPINE DEFLECTION @ 100#/ft (149kg/m)


12Standard

Light 3.6 3.4 86 12B

Wall RackDouble-Tier

Wall Rack

Spine(Standard Tray)

Spine(Light Duty Tray)

Wall-Rack Double TierTop RungWall-Rack Aluminum Top RungWall-Rack Aluminum

3.0 meter length foruse in Canada.

CSACertified

Page 191191

Wall-Rack Steel


Design Data

Ordering Data

One splice connector (p/n: 0200-0420) is provided with each tray length. Three wall spacers are included with each length.

Rung(Standard)






Standard

Spine(Standard)

Example Tray Catalog NumberBottom Rung Mono-Tray Steel, 6" Rung Spacing, 3" High, 12"-0" Length, 6" Wide

B 6 2 1 3 10 3 2


B BottomRung Tray

2

3

5

Pre-GalvSteel

HDGAF

Epoxy Paint(Steel)

6"

9"

12"

150

225

300

1

2

3

in mm

6"

9"

12"

18"

24"

150

225

300

450

600

1

2

3

4

5

in mm

3"

4"

6"

75

100

150

3

4

6

12'

10'

3.6

3.0

32

35

in mm ft m




CSACertified

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 192192

Quick Fittings Horizontal Quick Tees

BottomRung Horizontal Quick Tee

• Quickly creates a 90˚ right angle tee or elbow.

• May be used with top or bottom rung cable tray of all heights.

• For use with Mono-Tray®, Dual-Tray®, and Wall Rack Cable Tray.(For Dual-Rail® specify two Quick Tees).

• May also be used to accomplish 90˚ elbows when installed atend of cable tray run.

• For steel cable tray utilize bottom rung quick tees for both topand bottom rung applications.

BOTTOM RUNG HORIZONTAL QUICK TEE SELECTOR

B0100-0557 B0200-0557

WALL RACK MONO-TRAY® DUAL-RAIL®TrayWidth(in)

AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

3B0100-0551 B0200-05516 B0100-0557 B0200-0557

B0100-0550 B0200-0550B0100-0551 B0200-0551B0100-0552 B0200-0552B0100-0553 B0200-0553

B0100-0550 B0200-0550B0100-0551 B0200-0551B0100-0551 B0200-0551B0100-0552 B0200-0552

B0100-0552 B0200-05529B0100-0553 B0200-055312

18243036

BOTTOM RUNG HORIZONTAL QUICK TEEDIMENSIONAL INFORMATION

B0100-0557 B0200-0557 3 754.5 1126 1509 225

12 300

AluminumTrayP/N

SteelTrayP/N

Part WidthW

in mm

B0100-0550 B0200-0550B0100-0551 B0200-0551B0100-0552 B0200-0552B0100-0553 B0200-0553

NOTE: Nuts, bolts, & washers provided

Top Rung Horizontal Quick Tee

• Quickly creates a 90˚ right angle tee or elbow.

• May be used with top rung cable tray of all heights.

• (For Dual-Rail® specify two Quick Tees).

• For steel cable tray utilize bottom rung quick tees for both topand bottom rung applications.

TOP RUNG HORIZONTAL QUICK TEEDIMENSIONAL INFORMATION

0100-0557 N/A* 3 754.5 1126 1509 225

12 300

AluminumTrayP/N

SteelTrayP/N

Part WidthW

in mm

0100-0550 N/A*0100-0551 N/A*0100-0552 N/A*0100-0553 N/A*


TOP RUNG HORIZONTAL QUICK TEE SELECTOR

0100-0557


AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

30100-05516 0100-0557

0100-05500100-05510100-05520100-0553

0100-05500100-05510100-05510100-0553

0100-055290100-055312

18243036

An effective method for creating horizontal tees anywhere in a cable tray system.

Note: Add prefix "C" for 4" High Spine.

Page 193193

Quick Fittings Horizontal Quick Crosses

Bottom Rung Horizontal Quick Cross

• Quickly creates a 90˚ horizontal cross.

• May be used with top or bottom rung tray of all heights.

• For use with Mono-Tray®, and Wall Rack Cable Tray. Not to beused for Dual-Rail® Tray. Dual-Rail® Crosses are accomplishedby utilizing quick tees. (page192).

• For steel tray utilize bottom rung quick tees for both topand bottom rung applications.

BOTTOM RUNG HORIZONTAL QUICK CROSS SELECTOR

B0100-0697 B0200-0697


AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

3B0100-0691 B0200-06916 B0100-0691 B0200-0691

B0100-0692 B0200-0692B0100-0693 B0200-0693B0100-0694 B0200-0694B0100-0695 B0200-0695

B0100-0692 B0200-06929B0100-0693 B0200-069312

18243036

BOTTOM RUNG HORIZONTAL QUICKCROSS DIMENSIONAL INFORMATION

B0100-0691 B0200-0691 6 1509 225

12 30018 45024 600

AluminumTrayP/N

SteelTrayP/N

Part WidthW

in mm

B0100-0692 B0200-0692B0100-0693 B0200-0693B0100-0694 B0200-0694B0100-0695 B0200-0695


Top Rung Horizontal Quick Cross

• Quickly creates a 90˚ cross.• For use with top rung aluminum Mono-Tray®, and Wall Rack

Cable Tray. Not to be used for Dual-Rail® cable tray. Dual-Rail®

Crosses are accomplished by utilizing quick tees. (page 192).

• For steel tray utilize bottom rung quick tees for both topand bottom rung applications.

TOP RUNG HORIZONTAL QUICK CROSSDIMENSIONAL INFORMATION

0100-0691 N/A* 6 1509 225

12 30018 45024 600

AluminumTrayP/N

SteelTrayP/N

Part WidthW

in mm

0100-0692 N/A*0100-0693 N/A*0100-0694 N/A*0100-0695 N/A*


TOP RUNG HORIZONTAL QUICK CROSS SELECTOR

0100-0697


AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

AluminumTray P/N

SteelTray P/N

30100-06916 0100-0691

0100-06920100-06930100-06940100-0695

0100-069290100-069312

18243036

An effective method for creating horizontal crosses anywhere in a cable tray system.

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 194194

Page 195195

Page 196196

Support & Installation Accessories

Hangers & Wall Connectors Note: All hanging hardware and 1/2" (12mm) support rods by others.

J-HangerFor supporting tray at any point alonghorizontal run. Threaded hanger rod byothers. Overall height: 7.5" (190mm).Plated finish.

AluminumTray P/N

SteelTray P/N

0200-0610 0200-0610

Quick-StrapHangerFor supporting aluminum tray at any pointalong horizontal run. No drilling necessaryThreaded hanger rod by others. Plated finish.

AluminumTray P/N

0200-0615

Wall PlateConnectorFor wall termination and stabilization ofcable tray run. Wall fasteners by others.Mounting holes: four 7/16" (11mm).Plated finish.

AluminumTray P/N

SteelTray P/N

0100-0750 0200-0750

Tray to WallConnectorAttach end of aluminum cable tray run toany surface. For steel tray see wall plateconnector. (P/N: 0200-0750).

AluminumTray P/N

0100-0540

Stiffeners & Restraints Note: All hanging hardware and 1/2" (12mm) support rods by others.

Seismic BraceFor utilization in geographic areas ofseismic activities. Bracing materialsby others.

AluminumTray P/N

SteelTray P/N

0200-0565 0200-0567

Universal Stiffener

Stabilizes eccentrically loaded cable tray.Specify two universal stiffeners. Use withaluminum or steel tray.

P/N0200-0569

Page 197197


Wall Supports Allow center-hung tray to be conveniently mounted on walls or structures.

Mono-Tray®

Wall Support

7/16" diameter (11mm) mounting holesprovide quick and easy mounting ofMono-Tray® cable tray. Tray may bemounted above or hung below wallsupport. Material: Aluminum.

Dual-Rail®

Wall Support7/16" diameter (11mm) mounting holesprovide quick and easy mounting ofDual-Rail® cable tray. Tray may bemounted above or hung below wallsupport. Material: Aluminum.

Floor Supports Support cable tray system on floor applications.

Floor Supports

Outboard floor supports add to the versatility of Mono-Systems, Inc. Cable Tray Systems.

Cable tray has traditionally been only installed above ceilings or suspended from building

structures. Outboard floor supports provide a simple and effective method for installing

cable tray under raised computer room floors, on floors near industrial or mechanical

equipment, in tunnels, and in communications rooms.

Type 2For use with top rung tray only. Designprovides stabilization of cable tray.3 - 7/16" dia. (11) mounting holes.

AluminumTray P/N

SteelTray P/N

0100-0600-2-(H) 0200-0600-2-(H)

Type 3For use with top and bottom rung tray.3 - 7/16" dia. (11) mounting holes.

AluminumTray P/N

SteelTray P/N

0100-0600-3-(H) 0100-0600-3-(H)

MONO-TRAY®

WALL SUPPORT

6 0100-04779 0100-0470

12 0100-047118 0100-047224 0100-0473

Tray Width Part Number

DUAL-RAIL®

WALL SUPPORT

18 2100-047424 2100-047530 2100-047936 2100-0476

Tray Width Part Number

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 198198


Tray to Box Connectors Use for smooth penetrations into boxes or through walls.

MONO-TRAY®

TRAY TO BOX CONNECTOR

6 0103-0451

TrayWidth

(in)

Top RungAluminum Tray

P/N

9 0103-045212 0103-045318 0103-045424 0103-0455

0203-0451

Top RungSteel Tray

P/N

0203-04520203-04530203-04540203-0455

B0103-0451

Bottom RungAluminum Tray

P/N

B0103-0452B0103-0453B0103-0454B0103-0455

B0203-0451

Top RungSteel Tray

P/N

B0203-0452B0203-0453B0203-0454B0203-0455

Mono-Tray® & Wall Rack Tray to Box Connector

For Wall Rack & Wall Rack double-tier add -LH or -RH suffix to part number for left hand or right hand configuration. Change fourth digit of part number to 4 for4" (100mm) rung height.Change fourth digit of part number to 6 for6" (150mm) rung height.

Dual-Rail® Tray to Box Connector

Change fourth digit of part number to 4 for4" (100mm) rung height.Change fourth digit of part number to 6 for6" (150mm) rung height.

Left-handshown

DUAL-RAIL®

TRAY TO BOX CONNECTOR

18 2103-0454

TrayWidth

(in)


P/N

24 2103-045530 2103-045936 2103-0456

2203-0454

Top RungSteel Tray

P/N

2203-04552203-04592203-0456

B2103-0454


P/N

B2103-0455B2103-0459B2103-0456

B2203-0454

Top RungSteel Tray

P/N

B2203-0455B2203-0459B2203-0456

Blind Ends Cleanly terminates runs of cable tray.

MONO-TRAY®

BLIND END

6 0103-0401

TrayWidth

(in)


P/N

9 0103-040212 0103-040318 0103-040424 0103-0405

0203-0401

Top RungSteel Tray

P/N

0203-04020203-04030203-04040203-0405

B0103-0401


P/N

B0103-0402B0103-0403B0103-0404B0103-0405

B0203-0401

Top RungSteel Tray

P/N

B0203-0402B0203-0403B0203-0404B0203-0405

Mono-Tray® & Wall Rack Blind End

For Wall Rack & Wall Rack double-tier add -LH or -RH suffix to part number for left hand or right hand configuration. Change fourth digit of part number to 4 for4" (100mm) rung height.Change fourth digit of part number to 6 for6" (150mm) rung height.

Dual-Rail® Blind End

Change fourth digit of part number to 4 for4" (100mm) rung height.Change fourth digit of part number to 6 for6" (150mm) rung height.

Left-handshown

DUAL-RAIL®

BLIND END

18 2103-0404

TrayWidth

(in)


P/N

24 2103-040530 2103-040936 2103-0406

2203-0404

Top RungSteel Tray

P/N

2203-04052203-04092203-0406

B2103-0404


P/N

B2103-0405B2103-0409B2103-0406

B2203-0404

Top RungSteel Tray

P/N

B2203-0405B2203-0409B2203-0406

Page 199199


Conduit Bushing Dropout Integrate conduit and Mono-Systems, Inc. cable tray into one system.

For attaching conduit to cable tray.

Trade size openings allow for easy

attachment of many types of con-

duit bushings (conduit bushings

supplied by others. Tooth clamps

and/or screws are provided for

attachment.

Dropouts

Spine Bracket

An effective method of dropping cable bundles out of cable tray system.

Mono-Tray® Dropout

NOTE: Aluminum tray dropouts shown. Steel tray dropouts install using self-tapping screw (supplied).

Dual-Rail® Dropout

For full width Mono-Tray® Dropouts, specify2 dropouts for desired tray width.

CONDUITDROPOUT

3 75469

1218

5

RungSpacing

in mm

Change 3rdDigit ofP/N to:

100 6150 1225 2300 3450 4

CONDUIT DROPOUT

1/2 133/4

11 1/4

1 1/2

22 1/2

33 1/2

0100-0460

ConduitDiameterin mm

Aluminum TrayP/N

0200-046019 0100-0461 0200-046125 0100-0462 0200-046232 0100-0463 0200-046338 0100-0464 0200-046451 0100-0465 0200-046564 0100-0466 0200-046675 0100-0467 0200-046789 0100-0468 0200-0468102 0100-0469 0200-0469

Steel TrayP/N

4

MONO-TRAY®

DROPOUT

6 1.25 322.75 704.25 1087.25 184

10.25 260

TrayWidth

in

Part WidthW

in mm

9121824

0100-0417

AluminumCatalogNumber

SteelCatalogNumber

0100-04100100-04110100-04120100-0413

0200-04170200-04100200-04110200-04120200-0413

DUAL-RAIL®

DROPOUT

18 3 766 1525 1278 203

TrayWidth

in

Outside DropoutWidth (A)in mm

243036

2100-0418

AluminumTray P/N(Outside)

SteelTray P/N(Outside)

2100-04182100-04172100-0410

2200-04182200-04182200-04172200-0410

6.88 1756.88 175

14.88 37814.88 378

Inside DropoutWidth (B)in mm

2100-0417

AluminumTray P/N(Inside)

SteelTray P/N(Inside)

2100-04172100-04112100-0411

2200-04122200-04122200-04092200-0409

For full width Dual-Rail® Dropouts,specify 2 dropouts for desired traywidth.

Snap-on bracket installs quickly,and provides attachment of a widevariety of device boxes to 4" highspine.

★NEW

4" HighSpine Bracket

CBDB-431

StandardSpine Bracket

MTDB-431

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Also available for standardMono-Tray Aluminum Spine!

Page 200200

Covers & Inserts

Covers

MONO-TRAY®

SOLID COVER

6 3100-0321

TrayWidth

(in)


P/N

9 3100-032212 3100-032318 3100-032424 3100-0325

3200-0321

Top RungSteel Tray

P/N

3200-03223200-03233200-03243200-0325

B3100-0321


P/N

B3100-0322B3100-0323B3100-0324B3100-0325

B3200-0321

Bottom RungSteel Tray

P/N

B3200-0322B3200-0323B3200-0324B3200-0325

Mono-Tray® Solid Cover

• Standard 12'-0" (3.6m) length. Canadian orders (3m length)change seventh digit of part number to 5.

• All aluminum tray covers shown are made of aluminum.

• All steel covers shown are made of galvanized steel.

DUAL-RAIL®

SOLID COVER

18 3100-0324

TrayWidth

(in)


P/N

24 3100-032530 3100-032936 3100-0326

3200-0324

Top RungSteel Tray

P/N

3200-03253200-03293200-0326

B3200-0324


P/N

B3200-0325B3200-0329B3200-0326

B3100-0324


P/N

B3100-0325B3100-0329B3100-0326

Dual-Rail® Cover

• Sections up to 12" wide are manufactured at 12' lengths.Sections over 12" wide are manufactured at 6' lengths.Canadian orders (3m length) change seventh digit of partnumber to 5.



30 DEGREEPEAKED COVER

6 4100-0321

TrayWidth

(in)


P/N

9 4100-032212 4100-032318 4100-032424 4100-0325

4200-0321

Top RungSteel Tray

P/N

4200-03224200-03234200-03244200-0325

B4100-0321


P/N

B4100-0322B4100-0323B4100-0324B4100-0325

B4200-0321


P/N

B4200-0322B4200-0323B4200-0324B4200-0325

30 4100-0329 4200-0329 B4100-0329 B4200-032936 4100-0326 4200-0326 B4100-0326 B4200-0326

30 Degree Peaked Cover




120˚

Provides additional protection for cables and wiring.

Page 201201

Covers & Inserts

Solid Bottom Inserts

MONO-TRAY®

SOLID BOTTOM INSERT

6 5103-0321

TrayWidth

(in)


P/N

9 5103-032212 5103-032318 5103-032424 5103-0325

5203-0321

Top RungSteel Tray

P/N

5203-03225203-03235203-03245203-0325

B5103-0321


P/N

B5103-0322B5103-0323B5103-0324B5103-0325

B5203-0321


P/N

B5203-0322B5203-0323B5203-0324B5203-0325

Mono-Tray® Solid Bottom Insert


• Change 4th digit of part number to 6 for 6" (150mm) tray height.


• All aluminum tray inserts shown are made of aluminum.

• All steel inserts shown are made of galvanized steel.

DUAL-RAIL®

SOLID BOTTOM INSERT

18 5103-0324

TrayWidth

(in)


P/N

24 5103-032530 5103-032936 5103-0326

5203-0324

Top RungSteel Tray

P/N

5203-03255203-03295203-0326

B5103-0324


P/N

B5103-0325B5103-0329B5103-0326

B5203-0324


P/N

B5203-0325B5203-0329B5203-0326

Dual-Rail® Solid Bottom Insert




• All aluminum tray inserts shown are made of aluminum.

• All steel inserts shown are made of galvanized steel.

Use with cable tray covers to create an enclosed cable tray system.

Top Rung

Bottom Rung

Top Rung

Bottom Rung

Two inserts provided for bottom rung Mono-Tray®

Three inserts provided for bottom rung Dual-Rail®

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 202202


Miscellaneous Accessories

Rung Caps & Replacement Rungs

12" (304mm)Ground StrapFor use at wall penetrations or at anypoint where tray continuity is broken.2 - 7/16" dia. (11mm) mounting holes.

AluminumTray P/N

SteelTray P/N

0100-0521 0200-0521

Divider StripSelf-tapping screws provided forattachment.

End CapTerminates open end of spine. Nut, bolt,and washer provided.

AluminumTray P/N

SteelTray P/N

0100-0500 0200-0500

Rung CapsTo denote specific circuit paths or enhancetray appearance. Field install.

ReplacementRungsAdditional rungsto be used withaluminumremovable rungcable tray(pg. 65 - 69).Attachmentscrew provided.

BraidedAluminum

Divider Heightin mm

3

AluminumTray P/N

SteelTray P/N

4

6

75 0103-0440 N/A

0104-0440 N/A

0106-0440 N/A

100

150

Divider Strip

RUNG CAPS

0800-0710-BK Black Type "C" AluminumRung (STD.)& Type "B"

Type "D" Aluminum Rung

Type "E" Steel Rung (STD.)

0800-0710-GY Gray0800-0710-RD Red0800-0711-BK Black0800-0711-FO Flr Orange0800-0711-BK Black0800-0711-FO Flr Orange

P/N Color For Use With

Actual Tray Width

in mm

3

AluminumCatalog #

75 0100-0531-R

6 150 0100-0532-R

7 1/2 191 0100-0533-R

9 225 0100-0534-R

12 300 0100-0535-R

13 1/2 343 0100-0536-R

18 450 0100-0537-R

24 600 0100-0538-R

REPLACEMENT RUNGS

Page 203203

Welded Fittings

Example Tray Catalog NumberTop Rung Mono-Tray Aluminum, 3" Rung Height, 18" Radius, 90˚ Horizontal Elbow, 9" Wide

TRAY STYLE TRAY TYPE MATERIAL FITTING TYPE TRAY WIDTH

_ 1 1 0 3 2 22 3

B

L

BottomRung Tray

Light DutyTray

1

2

Mono-Tray

Dual-Rail

1

2

3

4

5

6

Aluminum

Pre-GalvanizedSteel

Hot DippedGalvanizedSteel afterFabrication


Epoxy Paint(Steel)

AnodizedAluminum

6"

9"

12"

18"

24"

36"

3"

4"

30"

150

225

300

450

600

900

75

100

750

1

2

3

4

5

6

7

8

9

in mm

30˚ IVR45˚ IVR60˚ IVR90˚ IVR30˚ OVR45˚ OVR60˚ OVR90˚ OVRVert. CrossVert. Tee IVRVert. Tee OVRCable Hanger EL30˚ Horiz. EL45˚ Horiz. EL60˚ Horiz. EL90˚ Horiz. ELHoriz. CrossHoriz. TeeHoriz. Wye L.H.Horiz. Wye R.H.

0102030405060708091011122021222324252627

Fitting Quick Selector

RADIUS

12"

18"

24"

36"

6"

30"

800

450

600

900

150

750

1

2

3

4

5

6

in mmRUNG HEIGHT

3"

4"

6"

75

100

150

3

4

6

in mm

For Top RungStandard Tray

No Letter Prefixis required

NOTE: Most elbows, tees, and directionalchanges can be achieved by utilizingstandard components and Quick Fittings.Welded fittings are designed to accommodatespecific cable radii requirements.Support documentation/details areavailable upon request.

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Page 204204

Specifications Mono-Tray®

PART 1 - GENERAL

1.10 REFERENCE STANDARDS:A. Underwriter1s Laboratories, Inc. certified No. E80034; National Electrical Code 318; NEMA class 12C (100#/ft./12 ft.) for Mono-Tray. L-Series NEMA 12A - 50#/ft./12ft..B. Canadian Standards Association No. LR 082927, Mono-Tray 3 meter sections are CSA classified 3C12 and 3D12 (179kg/m/3m). L-Series Mono-TrayCSA classified 3A2 (37kg/m/3m).C. The cable tray system components shall be certified by one of the following UL, C-UL, CSA and/or a recognized testing laboratory.

1.20 DESCRIPTION:A. Complete center hung and/or wall mounted steel or aluminum (select one) cable tray system and necessary accessories shall be provided as shown on plans. Install entire

cable tray system in accordance with all local governing codes.

1.30 SUBMITTALS:A. Submittal drawings, in the form of 8 1/2 x 11 catalog cut sheets, shall be provided for the following items: cable trays, fittings, accessories and load data.

PART 2 - PRODUCTS

2.10 MATERIALS - Steel or Aluminum (SELECT 3A or B2)A. Steel cable trays shall be ventilated ladder type construction with widths and depths as indicated on the drawings. The ladder tray shall be supported from one (1) steel

splice connector, installed in a telescoping manner, around the outer portion of the main spine members.B. Aluminum cable trays shall be ventilated ladder type construction with widths and depths as indicated on the drawings. The ladder tray shall be supported from one

(1) aluminum splice connector, installed inside the inner portion of the main spine members.

2.20 CENTER HUNG Mono-Tray - Steel or Aluminum (SELECT 3A or B2)A. Steel Mono-Tray shall be constructed of one (1) 12x32 rectangular seam welded steel tube to which .6252 square seam welded tube steel rungs are attached on _____ inch

(mm) centers. The cross rungs shall be bent up at their ends to a height of _____ inches (mm) to form a center supported, open sided, ladder type assembly. The trayshall be ______inches (mm) wide and must not have continuous side rails. As noted on drawings, rungs shall emanate at right angles from the top of the spine or bottomof the spine (select one).

B. Aluminum Mono-Tray Ladder Tray shall be constructed of one (1) 1.52x2.752 rectangular extruded aluminum tube to which 1/2" square box beam (type C standard) or3/4" x 1/2" box beam (type D) (select one) rungs are attached on _____ inch (mm) centers. The cross rungs shall be bent up at their ends to a height of _____ inches(mm) to form a dual supported, open sided, ladder type assembly. The tray must not have continuous side rails. As noted on drawings, rungs shall emanate at right anglesfrom the top of the spine or bottom of the spine (select one). L-Series Mono-Tray shall have 1/2" solid aluminum triangular (type B) rungs.

2.30 WALL RACK LADDER TRAY - Steel or Aluminum (SELECT 3A or B2)A. Steel Wall Rack tray shall be constructed of one (1) 12x32 rectangular seam welded steel tubes to which .6252 square seam welded tube steel rungs are attached on

_____ inch (mm) centers. The cross rungs shall emanate from one side of the spine and shall be bent up at their ends to a height of _____ inches (mm) to form an opensided, ladder type assembly. The tray shall be ______inches (mm) wide and must not have continuous side rails. As noted on drawings, rungs shall emanate at rightangles from the top of the spine or bottom of the spine (select one).

B. Aluminum Wall Rack tray shall be constructed of one (1) 1.52x2.752 rectangular extruded aluminum tube to which ?2 square box beam (type C standard) or 3/4" x 1/2" boxbeam (type D) rungs are attached on _____ inch (mm) centers. The cross rungs shall be emanate from one side of the spine and shall be bent up at their ends to a heightof _____ inches (mm) to an open sided, ladder type assembly. The tray must not have continuous side rails. As noted on drawings, rungs shall emanate at right angles fromthe top of the spine or bottom of the spine (select one). L-Series Wall Rack shall have 1/2" solid aluminum triangular (type B) rungs.

2.40 DOUBLE TIER WALL RACK LADDER TRAY - Aluminum OnlyA. Aluminum Wall Rack Double Tier tray shall be constructed of one (1) 1.52x2.752 rectangular extruded aluminum tube to which 1/2" square box beam (type C standard)

rungs are attached on _____ inch (mm) centers. These cross rungs shall emanate from one side (top of the spine only) and also vertically from the bottom of the spine toform two tiers of cable tray, one above the other and shall be bent up at their ends to a height of _____ inches (mm) to an open sided, ladder type assembly. The tray mustnot have continuous side rails. Tray shall be mounted by fastening the spine directly to the wall in accordance with manufacturer’s specifications.

2.50 FITTINGSA. Splice Connectors - Steel or Aluminum (select one). Sections of Mono-Tray, Wall Rack and/or Double Tier Wall Rack and all other fittings shall be joined by using one (1),

two bolt, 4 inch (102mm) long, rectangular splice connector which telescope about the spine of the tray. Splice connectors shall allow for thermal expansion/contraction ofthe tray system. The splice connectors shall be provided with a vertical hole to accept a 1/2 inch (12mm) threaded rod (furnished by others) which is used to support thetray in an overhead application. In addition, steel splice connectors shall be installed with the seam up and shall have holes to accommodate mounting configurationsassociated with horizontal and vertical pivot connectors.

B. Quick Tee and Quick Cross Connectors. Horizontal and Vertical quick connect items shall be used for all 90 degree elbows. Quick Tees and Crosses shall have factoryinstalled splice connector(s) welded to the component assembly.

C. Horizontal and Vertical Pivot Connectors - Angle tray connections to be field installed with Horizontal and Vertical pivot connectors. Fittings and shall telescope about thespine in a similar manner as the above splice connectors with top or side mounted pivot plates.

D. Tray Inserts / Tray Covers - Steel or Aluminum (select one), as well as other accessories shall be constructed of compatible material and design. Inserts and covers shall befield installed and rigidly secured by means of self tapping screws.

2.60 CONSTRUCTIONA. The Mono-Tray, Wall Rack and/or Double Tier Wall Rack rungs must pass through sections of spine and be staked in place, not screwed or welded. Each tray length shall

consist of one tubular rectangular shaped spine member. All fittings and accessories to be constructed of steel or aluminum (select one) and to be manufactured for usewith cable tray system.

2.70 SUPPORTSA. Each Mono-Tray, Wall Rack and/or Double Tier Wall Rack ladder tray section shall be supported on maximum 12 foot centers (3.6 meters) in Canada 10 foot centers (3

meters) by one .50 inch (12mm) piece of threaded rod which pass through the vertical hole in each of the splice connectors and fasten directly to each piece of spine byone .50 inch (12mm) nut and washer on both the top and bottom sides of each piece spine. When shorter spans are required, then a 5/8 inch (16 mm) diameter holeshould be drilled through the top and bottom walls of each piece of spine at support points only, and a single .50 inch (12mm) threaded rod should be inserted, througheach spine member, also using a .50 inch (12mm) nut and washer on both the top and bottom sides of the spine.

B. Wall Mounted Mono-Tray Steel or Aluminum (select one) Ladder Tray - shall utilize wall bracket of adequate widths to accommodate Mono-Tray configuration. Brackets tobe Mono-Systems, Inc. Series 0100-047_. All mounting material shall be furnished and installed by others.

2.80 OPTIONAL PAINTED FINISHESA. Optional powder coated painted finish to be applied to the outer surfaces of the cable tray and associated components. Prior to the application of the powder coat all

surfaces shall be cleaned and have an iron phosphate film applied. The color shall be __________.

PART 3 - MANUFACTURER

3.10 MANUFACTURER

A. Company specializing in manufacturing products specified in this section must have a minimum of ten years documented experience. Unless written approval is obtainedfrom the engineer 14 days prior to bid, the cable tray and fittings shall be manufactured by: Mono-Systems, Inc., 4 International Drive, Rye Brook New York 10573.(TEL) 914-934-2075 (FAX) 914-934-2190.

Page 205205

TR

OU

GH

TR

AY

CE

NT

ER

SP

INE

MO

NO

-R

AC

KM

ON

O-

ME

SH

PO

WE

R-

TR

AY

Specifications Dual-Rail®

PART 1 - GENERAL

1.10 REFERENCE STANDARDS:A. Underwriter's Laboratories, Inc. certified No. E80034; National Electrical Code 318; NEMA class 12C (100#/ft./12 ft.).B. Canadian Standards Association No. LR 082927, Dual-Rail 3 meter sections are CSA classified "E" (299kg/m/3m).C. The cable tray system components shall be certified by one of the following UL, C-UL, CSA and/or a recognized testing laboratory.

1.20 DESCRIPTION:A. Complete assembly of steel or aluminum (select one) cable tray system and necessary accessories shall be provided as shown on plans. Install entire

cable tray system in accordance with all local governing codes.

1.30 SUBMITTALS:A. Submittal drawings, in the form of 8 " x 11" catalog cut sheets, shall be provided for the following items: cable trays, fittings, accessories and load data.

PART 2 - PRODUCTS

2.10 MATERIALS (SELECT "A or B")A. Steel Dual-Rail shall be ventilated ladder type construction with widths and depths as indicated on the drawings. The ladder tray shall be supported from two (2) steel splice

connectors, installed in a telescoping manner, around the outer portion of the main spine members.B. Aluminum Dual-Rail shall be ventilated ladder type construction with widths and depths as indicated on the drawings. The ladder tray shall be supported from two (2) aluminum

splice connectors, installed inside the inner portion of the main spine members.

2.20 Dual-Rail® LADDER TRAY - Steel or Aluminum (SELECT "A or B")A. Steel Dual-Rail Ladder Tray shall be constructed of two (2) 1"x3" rectangular seam welded steel tubes to which .625" square seam welded tube steel rungs are attached

on _____ inch (mm) centers. The cross rungs shall be bent up at their ends to a height of _____ inches (mm) to form a dual supported, open sided, ladder type assembly. Thetray must not have continuous side rails. As noted on drawings, rungs shall emanate at right angles from the top of the spine or bottom of the spine (select one).

B. Aluminum Dual-Rail Ladder Tray shall be constructed of two (2) 1.5""x2.75" rectangular extruded aluminum tubes to which " square box beam (type C standard) or " x " box beam(type D) (select one) rungs are attached on _____ inch (mm) centers. The cross rungs shall be bent up at their ends to a height of _____ inches (mm) to form a dual supported,open sided, ladder type assembly. The tray must not have continuous side rails. As noted on drawings, rungs shall emanate at right angles from the top of the spine or bottom ofthe spine (select one).

2.30 FITTINGSA. Splice Connectors - Steel or Aluminum (select one). Sections of Dual-Rail tray and all other fittings shall be joined by using two (2), two bolt, 4 inch (102mm) long, rectangular splice

connectors which telescope about the spine of the tray. Splice connectors shall allow for thermal expansion/contraction of the tray system. The splice connectors shall be providedwith a vertical hole to accept a 1/2 inch (12mm) threaded rod (furnished by others) which is used to support the tray in an overhead application. In addition, steel splice connectorsshall be installed with the welded seam up and shall have holes to accommodate mounting configurations associated with horizontal and vertical pivot connectors.

B. Quick Tee - Steel or Aluminum (select one), Horizontal and Vertical quick connect items shall be used for all 90 degree elbows, tees and crosses by clamping to the spine(s).C. Horizontal and Vertical Pivot Connectors - Steel or Aluminum (select one), shall be used for angles of 90 degrees to 30 degrees and fasten into the spine in a similar manner as the

above splice connectors with top or side mounted pivot plates.D. Tray Inserts / Tray Covers - Steel or Aluminum (select one), as well as other accessories shall be constructed of compatible material and design. Inserts and covers shall be field

installed and rigidly secured by means of self tapping screws.

2.40 CONSTRUCTIONA. The Dual-Rail rungs must pass through both sections of spine and be staked in place, not screwed or welded. Each tray length shall consist of two parallel spine members, each

being a tubular rectangular shape. All fittings and accessories to be constructed of steel or aluminum (select one) and to be manufactured for use with cable tray system.

2.50 SUPPORTSA. Each Dual-Rail Steel or Aluminum (select one). Ladder Tray section shall be supported on maximum 12 foot centers (3.6 meters) in Canada 10 foot centers (3 meters) by two .50

inch (12mm) pieces of threaded rod which pass through the vertical hole in each of the splice connectors and fasten directly to each piece of spine by one .50 inch (12mm) nut andwasher on both the top and bottom sides of each piece spine. When shorter spans are needed, then a 5/8 inch (16 mm) diameter hole should be drilled through the top and bottomwalls of each piece of spine at support points only, and a single .50 inch (12mm) threaded rod should be inserted, through each spine member, also using a .50 inch (12mm) nut andwasher on both the top and bottom sides of each piece of spine. All mounting material shall be furnished and installed by others.

2.60 OPTIONAL PAINTED FINISHESA. Optional powder coated painted finish to be applied to the outer surfaces of the cable tray and associated components. Prior to the application of the powder coat all surfaces shall

be cleaned and have an iron phosphate film applied. The color shall be __________.

PART 3 - MANUFACTURER

3.10 MANUFACTURERA. Company specializing in manufacturing products specified in this section must have a minimum of ten years documented experience. The cable tray and fittings shall be

manufactured by: Mono-Systems, Inc., 4 International Drive, Rye Brook New York 10573. (TEL) 914-934-2075 (FAX) 914-934-2190.

Documents

Mono-Tray AluminumandSteel · Mono-Tray® AluminumandSteel Mono-Tray ... MONO - RACK MONO - MESH POWER - TRAY Aluminum and Steel Features and Benefits UL Classified / CSA Certified