Model PLVX AC-AC - Leading Distributor of Electronic ... · PDF fileEnhanced Precision Displacement Transducer Model PLVX AC-AC DESCRIPTION Model PLVX displacement transducer is designed

Enhanced Precision Displacement TransducerModel PLVX AC-AC

DESCRIPTIONModel PLVX displacement transducer is designed for single and

multi-point industrial gaging applications and micro-displace-

ment measurements in research and scientific studies. It incor-

porates non-rotating armatures to increase resistance to side

loads and improve repeatability. Bodies and probes are stainless

steel constructed and windings are magnetically shielded. Ultra

Precision LVDTs utilize spring loaded captive guided armatures

and low friction, non-rotating probes. Non-linearity is 0.25 % full

scale. The Model PLVX with a 0.02 in stroke range has a me-

chanical zero adjustment to correct pre- and over-travel.

FEATURES• Miniature design

• 0.25 % non-linearity

• Rugged, enhanced accuracy

• Enhanced immunity to electrical noise

• ±0.02 in to ±0.2 in range

• -58 °F to 257 °F operating range (standard)

• Non-rotating probe

• Stainless steel construction

• Extended life cycle

• Infinite resolution

• Captive guided spring return armature

• Not RoHS compliant

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

2 Honeywell • Sensing and Control

Model PLVX AC-AC

PERFORMANCE SPECIFICATIONS

Characteristic Measure

Stroke range ±0,51 mm to 5,08 mm [±0.02 in to 0.20 in]

Non-linearity (max.) ±0.25 % full scale

Non-repeatability (max.) 6 microinches

Output sensitivity See table

Output load (min.) 100000 ohm

Resolution Infinite

Phase shift <10° @ 5 kHz

ENVIRONMENTAL SPECIFICATIONS


Temperature, operating -40 °C to 100 °C [-40 °F to 212 °F]

Temperature effect, zero (max.)

0.005 % full scale/°F

Temperature effect, span (max.)


ELECTRICAL SPECIFICATIONS


Element type ac-ac displacement transducer

Input supply (calibrated) 5 V RMS @ 5 kHz

Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz

Electrical termination Multiconductor shielded cable

MECHANICAL SPECIFICATIONS


Case material Stainless steel

Probe material Stainless steel

Armature type Captive guided spring return

Weight See table

Spring force (max.) See table

RANGE CODES

Range Code Available ranges

HI ±0,51 mm [±0.02 in]

HK ±1,02 mm [±0.04 in]

HM ±2,54 mm [±0.10 in]

HN ±5,08 mm [±0.20 in]

OPTION CODES

Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Stroke ranges ±2,54 mm [±0.1 in]; ±0,51 mm [±0.02 in]; ±1,02 mm [±0.04 in]; ±0,25 mm [±0.01 in]

Electrical termination

Multiconductor shielded cable (1,83 m [6 ft])

Electrical cableorientation

Ra. Right angle cable exit

Mounting threads

TM392. 3/8-32 UNF threaded sleeve

Improved linearity

L10. ±0.1 % linearity* (only for ±1,02 mm [±0.04]; ±2,54 mm [±0.1]; ±5,08 mm [±0.2 in])

* Air activated model available. Consult factory for details


Honeywell • Sensing and Control 3

Enhanced Precision Displacement Transducer

MOUNTING DIMENSIONS

TYPICAL SYSTEM DIAGRAM

WIRING CODES

Range code

Available stroke range

Lmm [in]

Nmm [in]

Dmm [in]

Xmm [in]

Approx. unit weight

Max. springforceg [oz]

Output sensitivitymV/V/ 0.001 in

HI ±0,51[±0.02] 25,9 [1.02] 5,59 [0.22] 8,00 [0.315] 7,62 [0.30] 12,76 [0.45] 99,23 [3.5] 6

HK ±1,02 [±0.04] 53,1 [2.09] 13,97 [0.55] 8,00 [0.315] 13,97 [0.55] 15,88 [0.56] 100,92 [3.56] 4

HM ±2,54 [±0.1] 56,9 [2.24] 18,03 [0.71] 8,00 [0.315] 20,1 [0.79] 17,86 [0.63] 117,93 [4.16] 4

HN ±5,08 [±0.2] 86,6 [3.41]* 29,97 [1.18] 8,00 [0.315] 22,1 [0.87] 22,11 [0.78] 149,97 [5.29] 4*

* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.

Wire color Supply

Red (+) supply (calibrated @ 5 V RMS, 5 kHz)

Yellow Supply return

Blue Output

Green Output return

Black Secondary center tap (normally not connected)

Nominalelectriczeropoint

For reference only5


Sensing and Control

Automation and Control Solutions

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422 USA

+1-815-235-6847

www.honeywell.com/sensing

008749-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.

Model PLVX AC-AC Enhanced Precision Displacement Transducer

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]

WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.

Failure to comply with these instructions could result in death or serious injury.

WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.



Enhanced Precision Displacement TransducerModel S5 AC-AC

DESCRIPTIONModel S5 Ultra Precision displacement transducer is designed

for single and multi-point industrial gaging applications and

micro-displacement measurements in research and scientific

studies. It incorporates non-rotating armatures to increase

resistance to side loads and improve repeatability. Bodies and

probes are stainless steel constructed and windings

are magnetically shielded. Ultra Precision displacement trans-

ducers utilize spring loaded captive guided armatures and low

friction, non-rotating probes. Non-linearity is 0.25% full scale.

2,54 mm to 12,7 mm[0.10 in to 0.50 in]

0,25 mm to 1,02 mm[0.01 in to 0.04 in]







• Non-rotating probe








Model S5 AC-AC





Non-repeatability <20 microinches



Resolution Infinite




















Weight See table

Spring force (max.) See table

RANGE CODES


HH ±0,25 mm [±0.01 in]

HI ±0,51 mm [±0.02 in]

HK ±1,02 mm [±0.04 in]

HM ±2,54 mm [±0.10 in]

HN ±5,08 mm [±0.20 in]

HF ±7,62 mm [±0.30 in]

HG ±10,16 mm [±0.40 in]

HP ±12,7 mm [±0.50 in]

OPTION CODES


Stroke ranges ±0,25 mm to 12,7 mm [±0.01 in to ±0.5 in]





Mounting threads

TM392. 3/8-32 UNF threaded sleeve

Improved linearity

L10. 0.1 % max. linearity (only for ±0,01 mm to 0,51 mm [±0.040 in to ±0.02 in])

Higher temperature

TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]



Enhanced Precision Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Rangecode

Available stroke rangemm [in]

Lmm [in]

Dmm [in]

Xmm [in]

Approx. unit weightg [oz]

Max. springforceg [oz]


HH ±0,25 [±0.01] 48,01 [1.89] 7,88 [0.31] 10,92 [0.43] 396,89 [14] 212,62 [7.5] 4

HI ±0,51 [±0.02] 48,01 [1.89] 7,88 [0.31] 10,92 [0.43] 396,89 [14] 212,62 [7.5] 4

HK ±1,02 [±0.04] 51,05 [2.01] 7,88 [0.31] 12,95 [0.51] 510,29 [18] 212,62 [7.5] 4

HM ±2,54 [±0.1] 61 [2.40] 9,4 [0.37] 11,43 [0.45] 623,69 [22] 119,92 [4.23] 4

HN ±5,08 [±0.2] 78 [3.07]* 9,4 [0.37] 11,43 [0.45] 737,09 [26] 129,84 [4.58] 4*

HF ±7,62 [±0.3] 87,89 [3.46] 9,4 [0.37] 15,24 [0.60] 250,49 [30] 244,94 [8.64] 2

HG ±10,16 [±0.4] 99,06 [3.90] 9,4 [0.37] 19,05 [0.75] 963,88 [34] 209,79 [7.40] 2

HP ±12,7 [±0.5] 120,90 [4.76] 9,4 [0.37] 21,59 [0.85] 1190,68 [42] 214,89 [7.58] 2

* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.

Wire color Supply



Blue Output

Green Output return




For reference only

5


Sensing and Control


Honeywell



+1-815-235-6847



Model S5 AC-AC Enhanced Precision Displacement Transducer










Long Stroke Displacement TransducerModel MVL7 AC-AC

DESCRIPTIONModel MVL7 (free unguided armature) ac-ac long stroke

displacement transducer is designed for measuring static and

dynamic displacements from ±0.5 in to ±8.0 in. This model

achieves an impressive 0.25 % full scale non-linearities. Dis-

placement transducer bodies and probes are constructed of

stainless steel for durability in harsh, industrial environments.

FEATURES• 0.25 % non-linearity




• 12,7 mm to 203,2 mm [0.5 in to 8.0 in] range


• Free unguided armature




Model MVL7 AC-AC





Non-repeatability (max.) Not applicable


Resolution Infinite


















Armature type Free unguided

Probe thread M5 x 0.8

Weight See table

Spring force (max.) Not applicable

RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

HT ±101,6 mm [±4.0 in]

HU ±152,4 mm [±6.0 in]

HV ±203,2 mm [±8.0 in]

OPTION CODES


Stroke ranges ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]


Multiconductor shielded cable (1,83 m [6 ft])TM405. Axial Bendix connector on body radial (side)TM406. Bendix connector on body


TM49. Axial cable exit

Mounting threads

TM511. 13/16-32 UNF

Improved linearity

L10. ±0.1 % max. linearity (less than or equal to ±101.6 mm [±4 in])

Higher temperature

TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]



Long Stroke Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Rangecode

Available strokerange

L X Approx. bodyweight

Approx. armatureweight

Typical full scale output at 3 V RMS

HP ±12,7 mm [±0.5 in] 127 mm [5.0 in] 43,18 mm [1.7 in] 170,1 g [6 oz] 35,44 g [1.25 oz] 2.4 V RMS

HQ ±25,4 mm [±1.0 in] 152,4 mm [6.0 in] 68,58 mm [2.7 in] 226,8 g [8 oz] 49,61 g [1.75 oz] 3.0 V RMS

HR ±50,8 mm [±2.0 in] 269,24 mm [10.6 in] 81,28 mm [3.2 in] 368,54 g [13 oz] 56,7 g [2.0 oz] 4.8 V RMS

HS ±76,2 mm [±3.0 in] 381 mm [15.0 in] 119,38 mm [4.7 in] 453,59 g [16 oz] 62,37 g [2.2 oz] 4.5 V RMS

HT ±101,6 mm [±4.0 in] 425,45 mm [16.75 in] 132,08 mm [5.2 in] 566,99 g [20 oz] 70,87 g [2.5 oz] 9.5 V RMS

HU ±152,4 mm [±6.0 in] 615,95 mm [24.25 in] 182,88 mm [7.2 in] 822,14 g [29 oz] 113,40 g [4.0 oz] 7.2 V RMS

HV ±203,2 mm [±8.0 in] 806,45 mm [31.75 in] 259,08 mm [10.2 in] 1190,68 g [42 oz] 144,58 g [5.1 oz] 4.8 V RMS

Wire color Supply



Blue Output

Green Output return


For reference only5


Sensing and Control


Honeywell



+1-815-235-6847



Model MVL7 AC-AC Long Stroke Displacement Transducer










Long Stroke Displacement TransducerModel VL7A AC-AC

DESCRIPTIONModel VL7A (spring return armature) ac-ac long stroke displace-

ment transducer is designed for measuring static and dynamic

displacements from ±0.5 in to ±3.0 in. This model achieve

impressive 0.25 % full scale non-linearities. Displacement trans-

ducer bodies and probes are constructed of stainless steel for

durability in harsh, industrial environments.



• 12,7 mm to 76,2 mm [0.5 in to 3.0 in] range




• Spring return armature




Model VL7A AC-AC





Non-repeatability (max.) <20 microinches


Resolution Infinite



















Probe thread Not applicable

Weight See table

Spring force (max.) 4 oz/in

RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

OPTION CODES


Stroke ranges ±12,7 mm to ±50,8 mm [±0.5 in to ±2.0 in]; 76,2 mm [±3.0 in]





Mountingthreads

TM511. 13/16-32 UNF

Improved linearity

L10. ±0.1 % max. linearity (less than or equal to 101,6 mm [±4.0 in]

Higher temperature

TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Approx. unit weight Typical full scale outputat 3 V RMS

HP ±12,7 mm [±0.5 in] 135,89 mm [5.35 in] 38,1 mm [1.5 in] 184,27 g [6.5 oz] 2.4 V RMS

HQ ±25,4 mm [±1.0 in] 161,29 mm [6.35 in] 63,5 mm [2.5 in] 226,8 g [8.0 oz] 3.0 V RMS

HR ±50,8 mm [±2.0 in] 279,4 mm [11.0 in] 76,2 mm [3.0 in] 396,89 g [14 oz] 4.8 V RMS

HS ±76,2 mm [±3.0 in] 389,89 mm [15.35 in] 114,3 mm [4.5 in] 481,94 g [17 oz] 4.5 V RMS

Wire color Supply



Blue Output

Green Output return


For reference only

AA937

5


Sensing and Control


Honeywell



+1-815-235-6847



Model VL7A AC-AC Long Stroke Displacement Transducer










Long Stroke Displacement TransducerModel MVL7C AC-AC

DESCRIPTIONModel MVL7C (captive guided armature) ac-ac long stroke

displacement transducer is designed for measuring static and

dynamic displacements from ±0.5 in to ±18.5 in. This model

achieves an impressive 0.25 % full scale non-linearity. Displace-

ment transducer bodies and probes are constructed of stainless

steel for durability in harsh, industrial environments.



• ±18.5 in long-stroke range available



• 12,7 mm to 470 mm [0.5 in to 18.5 in] range


• Captive guided armature




Model MVL7C AC-AC



Stroke range ±12,7 mm to 470 mm [±0.5 in to 18.5 in]

Non-linearity (max.)±12,5 mm to 254 mm [±0.5 in to ±10 in]

±0.25 % full scale

Non-linearity (max.)±381 mm to 470 mm[±15 in to 18.5 in]

±0.5 % full scale

Resolution Infinite


















Armature type Captive guided


Weight See table

Spring force (max.) Not applicable

RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

HT ±101,6 mm [±4.0 in]

HU ±152,4 mm [±6.0 in]

HV ±203,2 mm [±8.0 in]

HW ±254 mm [±10.0 in]

HY ±381 mm [±15.0 in]

HZ ±470 mm [±18.5 in]

OPTION CODES


Stroke ranges ±12,7 mm to 470 mm [±0.5 in to 18.5 in]





Mountingthreads

TM511. 13/16-32 UNF

Improved linearity

L10. ±0.1 % max. linearity (less than or equal to ±101.6 mm [±4 in])

Higher temperature

TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Approx. unit weight Typical full scale outputat 3 V RMS

HP ±12,7 mm [±0.5 in] 152,4 mm [6.0 in] 38,1 mm [1.5 in] 283,5 g [10 oz] 2.4 V RMS

HQ ±25,4 mm [±1.0 in] 177,8 mm [7.0 in] 63,5 mm [2.5 in] 340,19 g [12 oz] 3.0 V RMS

HR ±50,8 mm [±2.0 in] 294,64 mm [11.6 in] 76,2 mm [3.0 in] 510,29 g [18 oz] 4.8 V RMS

HS ±76,2 mm [±3.0 in] 406,4 mm [16.0 in] 114,3 mm [4.5 in] 652,04 g [23 oz] 4.5 V RMS

HT ±101,6 mm [±4.0 in] 452,12 mm [17.8 in] 127,0 mm [5 in] 708,74 g [25 oz] 9.6 V RMS

HU ±152,4 mm [±6.0 in] 642,62 mm [25.3 in] 177,8 mm [7 in] 1020,6 g [36 oz] 7.2 V RMS

HV ±203,2 mm [±8.0 in] 833,12 mm [32.8 in] 254 mm [10 in] 1417,48 g [50 oz] 4.8 V RMS

HW ±254 mm [±10.0 in] 1028,7 mm [40.5 in] 304,8 mm [12 in] 1587,57 g [56 oz] 6.0 V RMS

HY ±381 mm [±15.0 in] 1435,1 mm [56.5 in] 406,4 mm [16 in] 2126,21 g [75 oz] 9.0 V RMS

HZ ±470 mm [±18.5 in] 1701,8 mm [67.0 in] 508 mm [20 in] 2523,11 g [89 oz] 11.1 V RMS

Wire color Supply



Blue Output

Green Output return


For reference only

5


Sensing and Control


Honeywell



+1-815-235-6847



Model MVL7C AC-AC Long Stroke Displacement Transducer










Long Stroke Displacement TransducerModel JEC DC-DC

DESCRIPTIONModels JEC (free unguided armature) dc-dc long stroke

displacement transducers utilize an improved internal circuit

which incorporates both reverse polarity protection and voltage

regulation. These features eliminate the danger of permanent

damage if supply voltage is accidentally reversed, and ensure

that sensitivity will remain constant over large variations in sup-

ply voltage. These models require no further conditioning, thus

permitting easy operation.

FEATURES• Stainlesssteelconstruction

• Enhancedlifecycle

• Voltageregulation

• Singleordualsupplywiring(fieldselectable)

• Reversepolarityprotected

• NotRoHScompliant


2Honeywell•SensingandControl

Model JEC DC-DC



Strokerange ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]

Non-linearity(max.) ±0.25 % full scale

Output load (min.) 2000 ohm with three-wire supply, 20000 ohm with floating supply

Output impedance 2 ohm

Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldse-lectable)

Isolation 1000Vinputtooutput

Polarity Output is positive for outward stroke










Element type dc-dc displacement transducer

Power supply, single 24Vdcto40Vdc@30mA

Power supply, dual ±12Vdcto±20Vdc@30mA

Ripplepowersupply 30mVpeaktopeak

Electrical termination Multiconductor shielded cable (1.83 m [6 ft])

Reversepolarityprotection Yes



Case material Stainlesssteel

Probe material Stainlesssteel

Armaturetype Free unguided

Probe thread M5x0.8

Weight Seetable

Springforce(max.) Notapplicable

RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

HT ±101,6 mm [±4.0 in]

HU ±152,4 mm [±6.0 in]

HV ±203,2 mm [±8.0 in]

OPTION CODES


Stroke ranges ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]


Multiconductor shielded cable (1.83 m [6 ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody

Electrical cable orientation

TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity

L10.±0.1%max.linearity(lessthanorequalto±101.6 mm [±4 in])


Honeywell•SensingandControl3


MOUNTING DIMENSIONS


WIRING CODES

Range code


L X Approx. body weight Approx. armature weight

HP ±12,7 mm [±0.5 in] 175,26 mm [6.9 in] 43,18 mm [1.7 in] 212,62 g [7.5 oz] 28,35 g [1.0 oz]

HQ ±25,4 mm [±1.0 in] 203,2 mm [8.0 in] 68,58 mm [2.7 in] 269,32 g [9.5 oz] 56,70 g [2.0 oz]

HR ±50,8 mm [±2.0 in] 317,5 mm [12.5 in] 81,28 mm [3.2 in] 368,54 g [13.0 oz] 70,87 g [2.5 oz]

HS ±76,2 mm [±3.0 in] 429,26 mm [16.9 in] 119,38 mm [4.7 in] 496,12 g [17.5 oz] 85,05 g [3.0 oz]

HT ±101,6 mm [±4.0 in] 474,98 mm [18.7 in] 132,08 mm [5.2 in] 623,69 g [22.0 oz] 99,22 g [3.5 oz]

HU ±152,4 mm [±6.0 in] 665,48 mm [26.2 in] 182,88 mm [7.2 in] 850,49 g [30.0 oz] 113,40 g [4.0 oz]

HV ±203,2 mm [±8.0 in] 855,98 mm [33.7 in] 259,08 mm [10.2 in] 1247,37 g [44.0 oz] 141,75 g [5.0 oz]

Wire color

Dual supply Single supply (floating)*

Outputs

Red 12Vto20Vinput 24Vto40Vinput

Blue -12Vto-20Vinput

Supplynegative

Black OV,I/P,O/Pcom-mon

Yellow 0Vto10V

Green ±5Vdc

* Output common floats at voltage source/2

For reference only


SensingandControl

AutomationandControlSolutions

Honeywell

1985DouglasDriveNorth

GoldenValley,MN55422USA

+1-815-235-6847



Model JEC DC-DC Long Stroke Displacement Transducer

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.

Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call [email protected]





NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer

unlessusinganexternalpowersupplytopowerthedisplacementtransducer.


Long Stroke Displacement TransducerModel JEC-AG DC-DC

DESCRIPTIONModels JEC-AG (captive guided spring return) dc-dc long stroke

displacement transducer utilizes an improved internal circuit

which incorporates both reverse polarity protection and voltage

regulation. These features eliminate the danger of permanent

damage if supply voltage is accidentally reversed, and ensure

that sensitivity will remain constant over large variations in sup-

ply voltage. These models require no further conditioning, thus

permitting easy operation.










Model JEC-AG DC-DC



Strokerange ±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]

Non-linearity(max.) ±0.25 % full scale

Output load (min.) 2000 ohm with three-wire supply; 20000 ohm with floating supply


Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldse-lectable)


Polarity Output positive for outward stroke













Ripple 30mVpeaktopeak





Case material Stainlesssteel



Probe thread Notapplicable

Weight Seetable

Springforce(max.) 4 oz/in

RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

OPTION CODES


Stroke ranges ±12,7 mm [±0.5 in], ±25,4 mm [±1.0 in], ±50,8 mm [±2.0 in], 6,2 mm [3.0 in]

Electricaltermination



TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity

L10.±0.1%max.linearity




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Approx. unit weight

HP ±12,7 mm [±0.5 in] 190,5 mm [7.5 in] 38,1 mm [1.5 in] 226,7 g [8 oz]

HQ ±25,4 mm [±1.0 in] 209,6 mm [8.25 in] 63,5 mm [2.5 in] 283,5 g [10 oz]

HR ±50,8 mm [±2.0 in] 326,39 mm [12.85 in] 76,2 mm [3.0 in] 396,9 g [14 oz]

HS ±76,2 mm [±3.0 in] 438,15 mm [17.25 in] 114,3 mm [4.5 in] 510,29 g [18 oz]

Wire color Dual supply Single supply (floating)* Outputs

Red 12Vto20Vinput 24Vto40Vinput


Supplynegative

Black OV,I/P,O/Pcommon

Yellow 0Vto10V

Green ±5Vdc


For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model JEC-AG DC-DC Long Stroke Displacement Transducer




FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call [email protected]








Long Stroke Displacement TransducerModel JEC-C DC-DC

DESCRIPTIONModel JEC-C (captive guided armature) dc-dc long stroke dis-

placement transducer utilizes an improved internal circuit which

incorporates both reverse polarity protection and voltage regula-

tion. These features eliminate the danger of permanent damage

if supply voltage is accidentally reversed and ensure that sensi-

tivity will remain constant over large variations in supply voltage.

This model requires no further conditioning, thus permitting easy

operation. Stroke ranges from ±0.5 in to ±18.5 in are available.


• ±18.5inlong-strokerangeavailable





• Captive guided




Model JEC-C DC-DC



Stroke range ±12,7 mm to 470 mm [±0.5 in to 18.5 in]

Non-linearity(max.)

±12,5 mm to 254 mm

[±0.5 in to ±10 in] ±0.25 % full scale

±381 mm to 470 mm

[±15 in to 18.5 in] ±0.5 % full scale

Output load (min.) 2000 ohm with three-wire supply;20000 ohm with floating supply


Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldselectable)


Polarity Output positive for outward stroke




Temperature effect, zero(max.)


Temperature effect, span(max.)














Armaturetype Captive guided

Probe thread M5x0.8

Weight See table


RANGE CODES


HP ±12,7 mm [±0.5 in]

HQ ±25,4 mm [±1.0 in]

HR ±50,8 mm [±2.0 in]

HS ±76,2 mm [±3.0 in]

HT ±101,6 mm [±4.0 in]

HU ±152,4 mm [±6.0 in]

HV ±203,2 mm [±8.0 in]

HW ±254 mm [±10.0 in]

HY ±381 mm [±15.0 in]

HZ ±470 mm [±18.5 in]

OPTION CODES


Stroke ranges ±12,7 mm to 470 mm [±0.5 in to 18.5 in]




TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity

L10.±0.1%max.linearity(lessthanorequalto±101.6 mm [±4 in])




MOUNTING DIMENSIONS


WIRING CODES


HP ±12,7 mm [±0.5 in] 190,5 mm [7.5 in] 38,1 mm [1.5 in] 340,9 g [12 oz]

HQ ±25,4 mm [±1.0 in] 219,15 mm [8.5 in] 63,5 mm [2.5 in] 396,9 g [14 oz]

HR ±50,8 mm [±2.0 in] 332,74 mm [13.1 in] 76,2 mm [3.0 in] 510,29 g [18 oz]

HS ±76,2 mm [±3.0 in] 444,5 mm [17.5 in] 114,3 mm [4.5 in] 623,6 g [22 oz]

HT ±101,6 mm [±4.0 in] 490,22 mm [19.3 in] 127 mm [5.0 in] 765,4 g [27 oz]

HU ±152,4 mm [±6.0 in] 680,72 mm [26.8 in] 177,8 mm [7.0 in] 1020,5 g [36 oz]

HV ±203,2 mm [±8.0 in] 871,22 mm [34.3 in] 254 mm [10 in] 1445 g [51.0 oz]

HW ±254 mm [±10.0 in] 1066,8 mm [42.0 in] 304,8 mm [12 in] 1672 g [59.0 oz]

HY ±381 mm [±15.0 in] 1473,2 mm [58.0 in] 406,4 mm [16 in] 2211 g [78.0 oz]

HZ ±470 mm [±18.5 in] 1740 mm [68.5 in] 508 mm [20 in] 2608 g [92.0 oz]

Wire color Dual supply Single supply (floating)* Outputs

Red 12Vto20Vinput

24Vto40Vinput


Supply negative

Black OV,I/P,O/Pcommon

Yellow 0Vto10V

Green ±5Vdc

For reference only



Sensing and Control


Honeywell



+1-815-235-6847



Model JEC-C DC-DC Long Stroke Displacement Transducer




For more information about Sensing and Control products, visit www.honeywell.com/sensing or call [email protected]








Long Stroke Displacement TransducerModel DLB DC-DC

FEATURES• ±0.25%non-linearity

• ±12,7mmto±203,2mm[±0.5into±8in]

• Lowvoltagerequirements

• Easytooperate

• Stainlesssteelconstruction



• Infiniteresolution

• Freeunguidedarmature


DESCRIPTIONModelDLB(freeunguided)displacementtransduceroperates

fromeither5Vdcregulatedor6Vdcto18Vdcunregulated

andgeneratesanoutputsignalof±2Vdc.Theoutputsignalis

electricallyisolatedfromtheinputvoltageandcanbeusedwith

digitalpanelmeterstofromacompletereadoutsystem.The

DLB,freeunguidedisavailablewithstrokerangesof±0.5into

±8.0in.



Model DLB DC-DC



Strokerange ±12,7mmto203,2mm[±0.5into8.0in]

Non-linearity(max.) ±0.25%fullscale

Outputload(min.) 2000ohm

Outputimpedance 2ohm

Outputsensitivity ±2Vdc(nominal)


Polarity Outputpositiveforoutwardstroke



Temperature,operating -50°Cto70°C[-58°Fto158°F]

Temperatureeffect,zero(max.)

0.006%fullscale/°F

Temperatureeffect,span(max.)

0.017%fullscale/°F



Elementtype dc-dcdisplacementtransducer

Inputsupply(acceptable),regulated

5Vdc@100mAmax.

Inputsupply(acceptable),unregulated

6Vto18Vdc@100mAmax.


Electricaltermination Multiconductorshieldedcable(1.83m[6ft])




Casematerial Stainlesssteel

Probematerial Stainlesssteel

Armaturetype Freeunguided

Probethread M5x0.8

Weight Seetable


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

HU ±152,4mm[±6.0in]

HV ±203,2mm[±8.0in]

OPTION CODES


Stroke ranges ±12,7mmto203,2mm[±0.5into8.0in]


Multiconductorshieldedcable(1.83m[6ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody


TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity

L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Approx. body weight Approx. armature weight

HP ±12,7mm[±0.5in] 175,26mm[6.9in] 43,18mm[1.7in] 212,62g[7.5oz] 28,35g[1.0oz]

HQ ±25,4mm[±1.0in] 200,6mm[7.9in] 68,58mm[2.7in] 269,32g[9.5oz] 56,70g[2.0oz]

HR ±50,8mm[±2.0in] 317,5mm[12.5in] 81,28mm[3.2in] 368,54g[13.0oz] 70,87g[2.5oz]

HS ±76,2mm[±3.0in] 429,26mm[16.9in] 119,38mm[4.7in] 496,12g[17.5oz] 85,05g[3.0oz]

HT ±101,6mm[±4.0in] 472,44mm[18.6in] 132,08mm[5.2in] 623,69g[22.0oz] 99,22g[3.5oz]

HU ±152,4mm[±6.0in] 662,94mm[26.1in] 182,88mm[7.2in] 850,49g[30.0oz] 113,40g[4.0oz]

HV ±203,2mm[±8.0in] 853,44mm[33.6in] 259,08mm[10.2in] 1247,37g[44.0oz] 141,75g[5.0oz]

Wire color 5 V supply 6 Vdc to 18 Vdc supply

Yellow 5Vinput Connecttobrown

Brown Insulate Connecttoyellow

Red Insulate 6Vdcto18Vdc

Blue Supplycommon(0V) Supplycommon(0V)

Black Outputlow Outputlow

Green Outputhigh Outputhigh

Shield Instrumentground Instrumentground

Note: Incorrect connection may cause irreparable damage, consult factory for assistance.

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model DLB DC-DC Long Stroke Displacement Transducer

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.

Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com








Long Stroke Displacement TransducerModel DLE DC-DC


• ±12,7mmto470mm[±0.5into18.5in]range


• Easytooperate





• Captiveguidedarmature


DESCRIPTIONModelDLE(captiveguidedarmature)operatesfromeither5

Vdcregulatedor6Vdcto18Vdcunregulatedandgeneratean

outputsignalof±2Vdc.Theoutputsignaliselectricallyisolated

fromtheinputvoltageandcanbeusedwithdigitalpanelmeters

tofromacompletereadoutsystem.TheDLE,captiveguided

armaturehasstrokerangesof±0.5into±18.5in.



Model DLE DC-DC



Strokerange ±12,7mmto470mm[±0.5into18.5in]

Non-linearity(max.)±12,5mmto254mm[±0.5into±10in]

±0.25%fullscale

Non-linearity(max.)±381mmto470mm[±15into18.5in]

±0.5%fullscale

Outputload(min.) 2000ohm

Outputimpedance 2ohm

Outputsensitivity ±2Vdc(nominal)







0.006%fullscale/°F


0.017%fullscale/°F





5Vdc@100mAmax.


6Vdcto18Vdc@100mAmax.


Electricaltermination Multiconductorshieldedcable(1.83m[6ft])






Armaturetype Captiveguided

Probethread M5x0.8

Weight Seetable


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

HU ±152,4mm[±6.0in]

HV ±203,2mm[±8.0in]

HW ±254mm[±10.0in]

HY ±381mm[±15.0in]

HZ ±470mm[±18.5in]

OPTION CODES


Stroke ranges ±12,7mmto470mm[±0.5into18.5in]




TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity





MOUNTING DIMENSIONS


WIRING CODES


HP ±12,7mm[±0.5in] 190,5mm[7.5in] 38,1mm[1.5in] 340,9g[12oz]

HQ ±25,4mm[±1.0in] 215,9mm[8.5in] 63,5mm[2.5in] 396,9g[14oz]

HR ±50,8mm[±2.0in] 332,74mm[13.1in] 76,2mm[3.0in] 510,29g[18oz]

HS ±76,2mm[±3.0in] 444,5mm[17.5in] 114,3mm[4.5in] 623,6g[22oz]

HT ±101,6mm[±4.0in] 490,22mm[19.3in] 127mm[5.0in] 765,4g[27oz]

HU ±152,4mm[±6.0in] 680,72mm[26.8in] 177,8mm[7.0in] 1020,5g[36oz]

HV ±203,2mm[±8.0in] 871,22mm[34.3in] 254mm[10in] 1445g[51oz]

HW ±254mm[±10.0in] 1066,8mm[42.0in] 304,8mm[12in] 1672g[59oz]

HY ±381mm[±15.0in] 1473,2mm[58.0in] 406,4mm[16in] 2211g[78oz]

HZ ±470mm[±18.5in] 1740mm[68.5in] 508mm[20in] 2608g[92oz]


Yellow 5Vinput Connecttobrown


Red Insulate 6Vdcto18Vdc


Black Outputlow Outputlow

Green Outputhigh Outputhigh


For reference only



SensingandControl


Honeywell



+1-815-235-6847



Model DLE DC-DC Long Stroke Displacement Transducer












Long Stroke Displacement TransducerModel DLF DC-DC

DESCRIPTIONModel DLF (captive guided spring return) operates from either 5

Vdc regulated or 6 Vdc to 18 Vdc unregulated and generate an

output signal of ±2 Vdc. The output signal is electrically isolated

from the input voltage and can be used with digital panel meters

to from a complete readout system. The DLF, captive guided

spring return, from 0.5 in to 3.0 in.


• ±12,7mmto76,2mm[±0.5into3.0in]range


• Easytooperate





• Captiveguidedspringreturnarmature




Model DLF DC-DC



Strokerange ±12,7mmto76,2mm[±0.5into3in]




Output sensitivity ±2 Vdc (nominal)

Isolation 1000 V input to output




Temperature, operating -50°Cto70°C[-58°Fto158°F]


0.006%fullscale/°F


0.017%fullscale/°F





5Vdc@100mAmax.


6Vdcto18Vdc@100mAmax.


Electricaltermination Multiconductor shielded cable (1.83 m [6ft])






Armature type Captiveguidedspringreturn

Probe thread N/A

Weight Seetable

Springforce(max.) 4.0oz/in

RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

OPTION CODES


Stroke ranges ±12,7mmto76,2mm[±0.5into3in]




TM49.Axialcableexit

Mounting threads

TM511.13/16-32UNF

Improved linearity





MOUNTING DIMENSIONS


WIRING CODES


HP ±12,7mm[±0.5in] 184,15mm[7.25in] 38,1mm[1.5in] 226,7g[8oz]

HQ ±25,4mm[±1.0in] 209,6mm[8.25in] 63,5mm[2.5in] 283,5g[10oz]

HR ±50,8mm[±2.0in] 326,39mm[12.85in] 76,2mm[3.0in] 396,9g[14oz]

HS ±76,2mm[±3.0in] 438,15mm[17.25in] 114,3mm[4.5in] 510,29g[18oz]


Yellow 5 V input Connecttobrown


Red Insulate 6 Vdc to 18 Vdc


Black Output low Output low

Green Output high Output high


For reference only



SensingandControl


Honeywell



+1-815-235-6847



Model DLF DC-DC Long Stroke Displacement Transducer

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.











Submersible* Displacement TransducerModel LW7S AC-AC


• Submersible


• ±12,7mmto76,2mmrange[±0.5into±3.0inrange]

• Enhancedimmunitytoelectricalnoise

• Submersiblematingconnectorwith5m{16ft]cable

• Easytooperate




DESCRIPTIONModelLW7Ssubmersibledisplacementtransducerisoftenideal

fordrilling,mining,andhydraulicengineeringapplicationswhich

requireadisplacementtransducerwithastainlesssteel,water-

proofconstruction.Thismodelmaybeusedasdirectmeasur-

inglineardisplacementdeviceorpositionalfeedbackelement

indynamicsystems.Theyaresuitableforsubmersioninfresh

waterandsomecorrosivefluidsforlongperiods.



Model LW7S AC-AC





Non-repeatability(max.) <20microinches

Outputsensitivity Seetable

Resolution Infinite





0.005%fullscale/°F


0.005%fullscale/°F

Pressurerating,standard 150psi,upto3000psiwithcableop-tions



Elementtype ac-acdisplacementtransducer

Inputsupply(calibrated) 5VRMS@5kHz

Inputsupply(acceptable) 1Vto7VRMS@5kHz

Outputload(minimum) 100000ohm

Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable





Armaturetype Captiveguidedspringreturn

Probethread Notapplicable

Springforce(max.) 4oz/in

RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

OPTION CODES




Multiconductorshieldedcable(1.83m[6.0ft])OPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]


OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable

Improved linearity


Higher temperature

TM315.204°C[400°F](lessthanorequalto±101.6mm[±4in])



Submersible* Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Range code


L X Spring force oz/in Typical full scale output at 5 V RMS

HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 4 3.5VRMS

HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 4 4.5VRMS

HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 4 7.6VRMS

HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 4 7.5VRMS

Wire color Dual power supply

Brown Supply

White Supplyreturn

Blue Output

Black Outputreturn

For reference only

5


SensingandControl


Honeywell



+1-815-235-6847



Model LW7S AC-AC Submersible* Displacement Transducer









NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.


Submersible* Displacement TransducerModel LW7C AC-AC


• Submersible





• Easytooperate




DESCRIPTIONModelLW7Csubmersibledisplacementtransducerisoftenideal



proofconstruction.Thismodelmaybeusedasdirectmeasuring

lineardisplacementdeviceorpositionalfeedbackelementindy-

namicsystems.Theyaresuitableforsubmersioninfreshwater

andsomecorrosivefluidsforlongperiods.Thecaptiveguided

springreturnarmatureisfittedwithaballendedprobe.



Model LW7C AC-AC






Resolution Infinite





0.005%fullscale/°F


0.005%fullscale/°F














Probethread M5x0.8


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES




Multiconductorshieldedcable(1.83m[6.0ft])OPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]



Improved linearity


Higher temperature





MOUNTING DIMENSIONS


WIRING CODES

Range code


L X Weight armature Typical full scale output at 5 V RMS

HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 21,26g[0.75oz] 3.5VRMS

HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 28,35g[1.0oz] 4.5VRMS

HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 42,52g[1.5oz] 7.6VRMS

HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 85,05g[3.0oz] 7.5VRMS

HT ±101,6mm[±4.0in] 452,88mm[17.83in] 127mm[5.0in] 104,89g[3.7oz] 16.05VRMS


Brown Supply

White Supplyreturn

Blue Output

Black Outputreturn

For reference only

5


SensingandControl


Honeywell



+1-815-235-6847



Model LW7C AC-AC Submersible* Displacement Transducer











Submersible* Displacement TransducerModel LW7U AC-AC


• Submersible





• Easytooperate




DESCRIPTIONModelLW7Usubmersibledisplacementtransducerisoftenideal



proofconstruction.Thismodelmaybeusedasdirectmeasur-

inglineardisplacementdeviceorpositionalfeedbackelement


waterandsomecorrosivefluidsforlongperiods.



Model LW7U AC-AC






Resolution Infinite





0.005%fullscale/°F


0.005%fullscale/°F














Probethread M5x0.8


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES




Submersiblematingconnectorwith1.83m[6.0ft]cableOPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]



Improved linearity


Higher temperature





MOUNTING DIMENSIONS


WIRING CODES

Range code


L X Weight armature Typical full scale output at 5 V RMS

HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 21,26g[0.75oz] 3.5VRMS

HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 28,35g[1.0oz] 4.5VRMS

HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 42,52g[1.5oz] 7.6VRMS

HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 85,05g[3.0oz] 7.5VRMS

HT ±101,6mm[±4.0in] 452,88mm[17.83in] 127mm[5.0in] 104,89g[3.7oz] 16.05VRMS


Brown Supply

White Supplyreturn

Blue Output

Black Outputreturn

[0.06 in]

For reference only

5


SensingandControl


Honeywell



+1-815-235-6847



Model LW7U AC-AC Submersible* Displacement Transducer











Submersible* Displacement TransducerModel DW7S DC-DC


• Submersible


• Easytooperate

• 5m[16ft]submersiblematingconnector(standard)







DESCRIPTIONModelDW7Ssubmersibledisplacementtransducerisoftenideal



proofconstruction.Thismodelmaybeusedasdirectmeasuring

lineardisplacementdevicesorpositionalfeedbackelements


waterandsomecorrosivefluidsforlongperiods.Thecaptive

guidedspringreturnarmatureisfittedwithaball-endedprobe.



Model DW7S DC-DC





Non-repeatability(max.) <20microinches






0.005%fullscale/°F


0.015%fullscale/°F





Inputsupply(acceptable) ±10Vdcto20Vdcunregulated(45mAmax.)or

20Vdcto40Vdcunregulated(45mAmax.)






Armaturetype Captiveguidedspringreturn

Probethread Notapplicable

Springforce(max.) 4oz/in

RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

OPTION CODES







Improved linearity





MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Spring force (oz/in) Typical full scale output

HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 4 ±5Vdc

HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 4 ±5Vdc

HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 4 ±5Vdc

HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 4 ±5Vdc


Brown (+)supply,10Vdcto20Vdc

Blue (-)supply,-10Vdcto-20Vdc

Black (-)outputcommon/supplyreturn

White (+)output,±5Vdc(min.2kohmacrossblackandwhite)

Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.

Wire color Single power supply


Blue Supplyreturn

Black (-)output


Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.Eitherblackorbluemustfloat.Ifbotharegroundedorconnectedtogether,theunitwillbedestroyed.

For reference only

DC input

GM-A


SensingandControl


Honeywell



+1-815-235-6847



Model DW7S DC-DC Submersible* Displacement Transducer











Submersible* Displacement TransducerModel DW7C DC-DC


• Submersible


• Easytooperate








DESCRIPTIONModelDW7Csubmersibledisplacementtransducerisoften

idealfordrilling,mining,andhydraulicengineeringapplica-

tionswhichrequireadisplacementtransducerwithastainless

steel,waterproofconstruction.Thismodelmaybeusedasdirect

measuringlineardisplacementdevicesorpositionalfeedback

elementsindynamicsystems.Theyaresuitableforsubmersion

infreshwaterandsomecorrosivefluidsforlongperiods.



Model DW7C DC-DC










0.005%fullscale/°F


0.015%fullscale/°F

Pressurerating,standard 150psi,upto3000psiwithcableoptions












Probethread M5x0.8in


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES







Improved linearity

L10.±0.1%max.linearity(lessthanorequalto101,6mm[±4.0in]




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Weight armature Typical full scale output

HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 21,26g[0.75oz] ±5Vdc

HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 28,35g[1.0oz] ±5Vdc

HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 42,52g[1.5oz] ±5Vdc

HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 85,05g[3.0oz] ±5Vdc

HT ±101,6mm[±4.0in] 502,92mm[19.80in] 127,0mm[5in] 104,89g[3.7oz] ±5Vdc









Blue Supplyreturn

Black (-)output



For reference only

DC input

GM-A


SensingandControl


Honeywell



+1-815-235-6847



Model DW7C DC-DC Submersible* Displacement Transducer











Submersible* Displacement TransducerModel DW7U DC-DC


• Submersible


• Easytooperate








DESCRIPTIONModelDW7Usubmersibledisplacementtransducerisoften

idealfordrilling,mining,andhydraulicengineeringapplica-

tionswhichrequireadisplacementtransducerwithastainless

steel,waterproofconstruction.Thismodelmaybeusedasdirect

measuringlineardisplacementdevicesorpositionalfeedback

elementsindynamicsystems.Theyaresuitableforsubmersion

infreshwaterandsomecorrosivefluidsforlongperiods.



Model DW7U DC-DC










0.005%fullscale/°F


0.015%fullscale/°F

Pressurerating,standard 150psi,upto3000psiwithcableoptions












Probethread M5x0.8in


RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES







Improved linearity

L10.±0.1%max.linearity(lessthanorequalto101,6mm[±4.0in]




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X Weight armature Typical full scale output

HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 21,26g[0.75oz] ±5Vdc

HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 28,35g[1.0oz] ±5Vdc

HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 42,52g[1.5oz] ±5Vdc

HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 85,05g[3.0oz] ±5Vdc

HT ±101,6mm[±4.0in] 502,92mm[19.80in] 127,0mm[5in] 104,89g[3.7oz] ±5Vdc







For reference only

DC input

GM-A



Blue Supplyreturn

Black (-)output




SensingandControl


Honeywell



+1-815-235-6847



Model DW7U DC-DC Submersible* Displacement Transducer











Submersible* Displacement TransducerModel MS7A AC-AC

DESCRIPTIONModel MS7A submersible displacement transducer is en-

gineered for rugged industrial applications which require a

waterproof transducer. This stainless steel unit is designed with

permanently attached, waterproof connecting cable. Connecting

cables and a waterproof outer jacket are hermetically sealed to

the transducer to allow for submersion in most liquids and cor-

rosive fluids. These models can withstand external pressures to

250 psi.


• Submersible

• Withstands250psi,externalpressure


• ±1,02mmto12,7mm[±0.04to±0.50inrange]

• -4°Fto257°Foperatingrange(standard)



• Hermeticallysealed,waterproofcable1.83m[6ft]

• Easytooperate





Model MS7A AC-AC



Stroke range ±1,02mmto12,7mm[±0.04into0.50in]


Non-repeatability <10microinches

Output sensitivity 2mV/V/0.001in

Output load 100000ohm

Resolution Infinite





0.006%fullscale/°F


0.006%fullscale/°F



Elementtype ac-ac displacement transducer


Inputsupply(acceptable) 1Vto7VRMS@2kHzto10kHz

Electricaltermination Hermeticallysealedwaterproofcable1.83m[6ft]





Armature type Freeunguided

Probe thread M3X0.5

RANGE CODES


HK ±1,02mm[±0.04in]

HM ±2,54mm[±0.10in]

HN ±5,08mm[±0.20in]

HF ±7,62mm[±0.30in]

HG ±10,16mm[±0.40in]

HP ±12,7mm[±0.50in]

OPTION CODES


Stroke ranges ±1,02mmto12,7mm[±0.04into±0.5in]


Hermeticallysealedwaterproofcable(1,83m[6ft])




MOUNTING DIMENSIONS


WIRING CODES

Range code

Available stroke rangemm [in]

Lmm [in]

Dmm [in]

X **mm [in]

D1mm [in]

Total weight***g [oz]

Armature weightg [oz]

HK ±1,02[±0.04] 40,89[1.61] 8,00[0.315] 16,99[0.669] 2,34[0.092] 25,51[0.90] 3,69[0.13]

HM ±2,54[±0.1] 46,99[1.85] 9,53[0.375] 17,98[0.708] 2,34[0.092] 28,35[1.00] 5,67[0.20]

HN ±5,08[±0.2] 50,29[1.98] 9,53[0.375] 22,86[0.900] 2,34[0.092] 32,60[1.15] 7,09[0.25]

HF ±7,62[±0.3] 69,85[2.75] 9,53[0.375] 29,21[1.150] 2,34[0.092] 45,35[1.60] 9,92[0.35]

HG ±10,16[±0.4] 73,91[2.91] 9,53[0.375] 32,51[1.280] 2,34[0.092] 48,19[1.70] 10,49[0.37]

HP ±12,7[±0.5] 89,91[3.54] 9,53[0.375] 34,93[1.375] 2,34[0.092] 59,53[2.10] 12,76[0.45]

Wire color Supply

Red Supply(calibrated@5VRMS,5kHz)


Blue Output

Green Output return

Black Secondarycentertap(normallynotconnected)

Cable shield is not connected to transducer

For reference only

5


Sensing and Control


Honeywell



+1-815-235-6847



Model MS7A AC-AC Submersible* Displacement Transducer


Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.







NOTES*Notrecommendedforsaltwateruse**Dimensionsat“X”atnominalelectricalzero***Excludingcable


Submersible* Displacement TransducerModel S7C AC-AC

DESCRIPTIONModel S7C ac-ac submersible displacement transducer is

engineered for rugged industrial applications which require a

waterproof transducer. This stainless steel unit is designed with

permanently attached, waterproof connecting cable. Connecting

cables and a waterproof outer jacket are hermetically sealed to

the transducer to allow for submersion in most liquids and cor-

rosive fluids. These models can withstand external pressures to

250 psi.


• Submersible

• Withstands250psi,externalpressure


• ±1,02mmto12,7mm[±0.04to±0.50inrange]

• -4°Fto257°Foperatingrange(standard)



• Hermeticallysealed,waterproofcable1.83m[6ft]

• Easytooperate





Model S7C AC-AC





Non-repeatability <10microinches

Output sensitivity 2mV/V/0.001in

Output load 100000ohm

Resolution Infinite





0.006%fullscale/°F


0.006%fullscale/°F





Inputsupply(acceptable) 1Vto7VRMS@2kHzto10kHz

Electricaltermination Hermeticallysealedwaterproofcable1.83m[6ft]






Probe thread Notapplicable

RANGE CODES


HK ±1,02mm[±0.04in]

HM ±2,54mm[±0.10in]

HN ±5,08mm[±0.20in]

HF ±7,62mm[±0.30in]

HG ±10,16mm[±0.40in]

HP ±12,7mm[±0.50in]

OPTION CODES


Stroke ranges ±1,02mmto12,7mm[±0.04into±0.5in]


Hermeticallysealedwaterproofcable(1,83m[6ft])




MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range

L D X ** Total weight*** Max. spring force

HK ±1,02mm[±0.04in]

50,8mm[2.00in]

8,00mm[0.315in]

11,43mm[0.45in]

51,03g[1.8oz]

21,62g[7.5oz]

HM ±2,54mm[±0.1in]

64,01mm[2.52in]

9,53mm[0.375in]

11.68mm[0.46in]

82,21g[2.9oz]

141,75g[5.0oz]

HN ±5,08mm[±0.2in]

69,85mm[2.75in]

9,53mm[0.375in]

12,19mm[0.48in]

82,21g[2.9oz]

141,75g[5.0oz]

HF ±7,62mm[±0.3in]

95,25 mm[3.75in]

9,53mm[0.375in]

18,23mm[0.72in]

110,56[3.9oz]

141,75g[5.0oz]

HG ±10,16mm[±0.4in]

106,43mm[4.19in]

9,53mm[0.375in]

22,1mm[0.87in]

124,74g[4.4oz]

141,75g[5.0oz]

HP ±12,7mm[±0.5in]

129,03mm[5.08in]

9,53mm[0.375in]

24,64mm[0.97in]

153,09g[5.4oz]

141,75g[5.0oz]

Wire color Supply

Red Supply(calibrated@5VRMS,5kHz)


Blue Output

Green Output return

Black Secondarycentertap(normallynotconnected)

For reference only

5


Sensing and Control


Honeywell



+1-815-235-6847



Model S7C AC-AC Submersible* Displacement Transducer


Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.







NOTES*Notrecommendedforsaltwateruse**Dimensionsat“X”atnominalelectricalzero***Excludingcable


Sub-Sea Displacement TransducerModel SSA AC-AC

DESCRIPTIONModel SSA ac-ac displacement transducer is offered in ranges

from ±0.5 in up to ±4.0 in stroke length. The oceanographic type

of electrical plug allows the connection to be made underwater.

This Sub-Sea displacement sensor are pressure rated to operate

down to a depth of 7500 feet in sea water. The body of the sen-

sor is made from 316 SS with all-welded construction. Honeywell

offers in-line amplifiers and digital indicators for both LVDT mod-

els that provide ±5 Vdc, 10 Vdc or 4 mA to 20 mA and RS232

outputs with zero and span adjustments.


• Submersible

• Allwelded316stainlesssteelconstruction

• Easytooperate


• Upto2286m[7500ft]depth






Model SSA AC-AC





Output sensitivity Consultfactory;0.3VRMSto3.0VRMSrange dependent

Resolution Infinite





0.005%fullscale/°F


0.005%fullscale/°F

Operating pressure 3500 psi




Inputsupply(acceptable) 0.5 V RMS to 7 V RMS @ 5 kHz

Ripple Notapplicable

Electricaltermination Includessubmersible,neoprene,andnickel-aluminum bronze connector moldedto1.83m[6ft]ofneoprenejacketed10,16mm[0.40in]diametercable. The electrical connector may be mated under water up to 500 psi or335,28m[1100ft].Longercablelengths are available up to 990,6 m [3250ft].Consultfactoryforinformation.



Casematerial 316 Stainless steel with all welded construction

Probe material 316 Stainless steel with all welded construction

Probe thread M10x1.5

RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES




Submersible, neoprene and nickel-aluminum bronzeconnectormoldedto1.83m[6.0ft]ofneoprene jacketed cable



Sub-Sea Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range

L X D1 D2 A B

HP ±12,7 mm [±0.5in]

223,52 mm [8.8in]

53,34 mm [2.1in]

38,1mm[1.5in]

9,91 mm[0.39in]

91,44 mm [3.6in]

30,48mm[1.2in]

HQ ±25,4 mm [±1.0in]

251,46 mm [9.9in]

66,04 mm [2.6in]

38,1mm[1.5in]

9,91 mm [0.39in]

91,44 mm [3.6in]

30,48mm[1.2in]

HR ±50,8mm[±2.0in]

345,44 mm [13.6in]

91,44 mm [3.6in]

38,1mm[1.5in]

9,91 mm [0.39in]

91,44 mm [3.6in]

30,48mm[1.2in]

HS ±76,2 mm [±3.0in]

434,34 mm [17.1in]

116,84mm[4.6in]

38,1mm[1.5in]

9,91 mm [0.39in]

91,44 mm [3.6in]

30,48mm[1.2in]

HT ±101,6 mm [±4.0in]

535,94 mm [21.1in]

142,24 mm [5.6in]

38,1mm[1.5in]

9,91 mm [0.39in]

91,44 mm [3.6in]

30,48mm[1.2in]


Black Excitationhigh

White Excitationlow

Red Signal high

Green Signal low

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model SSA AC-AC Sub-Sea Displacement Transducer

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.









Sub-Sea Displacement TransducerModel SSD DC-DC


• Submersible

• Allwelded316stainlesssteelconstruction

• Easytooperate

• Upto2286m[7500ft]depth






DESCRIPTIONModelSSDdc-dcdisplacementtransducerisofferedinranges

from±0.5inupto±4.0instrokelength.Theoceanographictype

ofelectricalplugallowstheconnectiontobemadeunderwater.

ThisSub-Seadisplacementsensorispressureratedtooperate

downtoadepthof7500feetinseawater.Thebodyofthesen-

sorismadefrom316SSwithall-weldedconstruction.Honeywell

offersin-lineamplifiersanddigitalindicatorsthatprovide±5

Vdc,10Vdcor4mAto20mAandRS-232outputswithzeroand

spanadjustments.



Model SSD DC-DC





Outputsensitivity ±5Vdc

Resolution Infinite



Temperature,operating -40°Cto50°C[-40°Fto122°F](Note:-9°Cto60°C[15°Fto140°F]on4mAto20mA)


0.005%fullscale/°F


0.015%fullscale/°F

Operatingpressure 3500psi




Inputsupply(acceptable)Singlefloatingsupply

20Vdcto40Vdc@25mA

Inputsupply(acceptable)Dualsupply

±10Vdcto20Vdc@25mA


Electricaltermination Includessubmersible,neoprene,andnickel-aluminumbronzeconnectormoldedto1.83m[6ft]ofneoprenejacketed10,2mm[0.40in]diametercable.Theelectricalconnectormaybematedunderwaterupto500psior335,28m[1100ft].Longercablelengthsareavailableupto990,6m[3250ft].Consultfactoryforinformation.



Casematerial 316stainlesssteelwithallweldedconstruction

Probematerial 316stainlesssteelwithallweldedconstruction

Probethread M10x1.5

RANGE CODES


HP ±12,7mm[±0.5in]

HQ ±25,4mm[±1.0in]

HR ±50,8mm[±2.0in]

HS ±76,2mm[±3.0in]

HT ±101,6mm[±4.0in]

OPTION CODES




Submersible,neopreneandnickel-aluminumbronzeconnectormoldedto1.83m[6ft]ofneoprenejacketedcable



Sub-Sea Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Range code Available stroke range L X D1 D2 A B

HP ±12,7mm[±0.5in] 223,52mm[8.8in]

53,34mm[2.1in]

38,1mm[1.5in]

9,91mm[0.39in]

91,44mm[3.6in]

30,48mm[1.2in]

HQ ±25,4mm[±1.0in] 251,46mm[9.9in]

66,04mm[2.6in]

38,1mm[1.5in]

9,91mm[0.39in]

91,44mm[3.6in]

30,48mm[1.2in]

HR ±50,8mm[±2.0in] 345,44mm[13.6in]

91,44mm[3.6in]

38,1mm[1.5in]

9,91mm[0.39in]

91,44mm[3.6in]

30,48mm[1.2in]

HS ±76,2mm[±3.0in] 434,34mm[17.1in]

116,84mm[4.6in]

38,1mm[1.5in]

9,91mm[0.39in]

91,44mm[3.6in]

30,48mm[1.2in]

HT ±101,6mm[±4.0in] 535,94mm[21.1in]

142,24mm[5.6in]

38,1mm[1.5in]

9,91mm[0.39in]

91,44mm[3.6in]

30,48mm[1.2in]

Wire color or pin Single supply* designation

Dual supply designation

RedorA 20Vto40V 10Vto20V

GreenorB Supplycommon -10Vto-20V

BlackorC Outputcommon** 0Vcommon

WhiteorD Output Output

*Supplymustbefullyfloating**OutputcommonfloatsatVsupply/2Min2000ohmswithdualsupply,20000ohmswithsinglesupply

For reference only


SensingandControl


Honeywell



+1-815-235-6847



Model SSD DC-DC Sub-Sea Displacement Transducer












Miniature Displacement TransducerModel MS3 DC-DC

DESCRIPTIONModel MS3 (free unguided armature) dc-dc miniature displace-

ment transducer is ideally suited for multi-point applications

with space constraints and provide a cost-effective alternative

to larger, more expensive units. This model is compatible with

dc data logging equipment used for taking readings from strain

gages or other dc operated transducers.


• Cost efficient





• Single or dual supply wiring (field selectable)





Model MS3 DC-DC







Output sensitivity ±5 Vdc or 0 Vdc to 10 Vdc (field se-lectable)

Resolution Infinite











Power supply, single 24 Vdc to 40 Vdc @ 30 mA

Power supply, dual ±12 Vdc to ±20 Vdc @ 30 mA








Weight 73,5 g [2.6 oz]

RANGE CODES


HM ±2,54 mm [±0.1 in]

HN ±5,08 mm [±0.2 in]

HF ±7,62 mm [±0.3 in]

HG ±10,16 mm [±0.4 in]

OPTION CODES


Stroke ranges ±25,4 mm to 101,6 mm [±0.1 in to 4 in]


Multiconductor shielded cable (1.83 m [6 ft])6a. Bendix PTIH-10-6P right angle Bendix


Ra. Right angle

Mounting threads

13a. 1/2-20 UNF13f. 3/8-32 UNF

Improved linearity

L10. 0.1 % on some models



Miniature Displacement Transducer

MOUNTING DIMENSIONS


WIRING CODES

Wire color Dual supply Single supply (floating)*

Outputs

Red 12 V to 20 V input

24 V to 40 V input

Blue -12 V to -20 V input

Supply negative

Black OV, I/P, O/P com-mon

Yellow 0 V to 10 V

Green ±5 Vdc


For reference only


Sensing and Control


Honeywell



+1-815-235-6847



Model MS3 DC-DC Miniature Displacement Transducer









NOTES1. GM-A should not be used with an amplified displacement transducer

unless using an external power supply to power the displacement transducer.


Miniature Displacement TransducerModel S3C DC-DC

DESCRIPTIONModel S3C (captive guided spring return armature) dc-dc min-

iature displacement transducer is ideally suited for multi-point

applications with space constraints and provide a cost-effective

alternative to larger, more expensive units. This model is com-

patible with dc data logging equipment used for taking readings

from strain gages or other dc operated transducers.


• Cost efficient





• Single or dual supply wiring (field selectable)





Model S3C DC-DC







Output sensitivity ±5 Vdc or 0 Vdc to 10 Vdc (field se-lectable)

Resolution Infinite











Power supply, single 24 Vdc to 40 Vdc @ 30 mA

Power supply, dual ±12 Vdc to ±20 Vdc @ 30 mA







Probe thread Not applicable

Weight 82,5 g [2.91 oz]

RANGE CODES


HM ±2,54 mm [±0.1 in]

HN ±5,08 mm [±0.2 in]

HF ±7,62 mm [±0.3 in]

HG ±10,16 mm [±0.4 in]

OPTION CODES


Stroke ranges ±5,08 mm [±0.2 in], ±2,54 mm [±0.1 in], ±7,62 mm [±0.3 in], ±10,16 mm [±0.4 in]

Electricaltermination

Multiconductor shielded cable (1.83 m [6 ft])6a. Bendix PTIH-10-6P right angle Bendix


Ra. Right angle

Mountingthreads

13a. 1/2-20 UNF13f. 3/8-32 UNF

Improved linearity

L10. 0.1 % on some models




MOUNTING DIMENSIONS


WIRING CODES

Wire color Dual supply Single supply (floating)*

Outputs

Red 12 V to 20 V input

24 V to 40 V input

–

Blue -12 V to -20 V input

Supply negative –

Black OV, I/P, O/P com-mon

– –

Yellow – – 0 V to 10 V

Green – – ±5 Vdc


For reference only


008757-2-EN IL50 GLO September 2009Copyright © 2009 Honeywell International Inc. All rights reserved.

Model S3C DC-DC Miniature Displacement Transducer

Sensing and Control

Honeywell


Golden Valley, MN 55422

www.honeywell.com

NOTES1. GM-A should not be used with an amplified displacement transducer

unless using an external power supply to power the displacement transducer.




WARNINGPERSONAL INJURY

•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.


WARNINGMISUSE OF DOCUMENTATION

•Theinformationpresentedinthisdatasheetisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.


Find out more

Honeywell serves its customers

through a worldwide network of

sales offices, representatives

and distributors. For application

assistance, current specifica-

tions, pricing or name of the

nearest Authorized Distributor,

contact your local sales office.

To learn more about Honeywell’s

test and measurement products,

call +1-614-850-5000, visit

www.honeywell.com/sensotec,

or e-mail inquiries to

[email protected]


Miniature Displacement TransducerModel M-5C AC-AC

DESCRIPTIONModel M-5C ac-ac miniature displacement transducers are

rugged, stable, and compact transducers, which provide high

accuracy static and dynamic displacement measurement.

These units are easily mounted in any position, at remote or

hazardous locations where direct measurement would not be

practical. High electrical output, exceptional linearity and

infinite resolution enable these units to be effective in a variety of

applications. M-5C has a free unguided armature, which may be

mounted to be virtually friction-free. The displacement transduc-

er’s body and armature are separable.




• ±0.025 in to ±0.5 in range








Model M-5C AC-AC





Non-repeatability Not measureable



Resolution Infinite














Electrical termination Multiconductor shielded cable 1.83 m [6 ft]







Weight See table

RANGE CODES


HM ±2,54 mm [±0.10 in]

HN ±5,08 mm [±0.20 in]

HF ±7,62 mm [±0.30 in]

HG ±10,16 mm [±0.40 in]

HP ±12,7 mm [±0.50 in]

OPTION CODES


Stroke ranges ±2,54 mm to 12,7 mm [±0.1 in to ±0.5 in]





Mountingthreads

13g. 1/8 in BSP

Improved linearity

L10. ±0.1 % max. linearity (less than or equal to 101,6 mm [±4.0 in]




MOUNTING DIMENSIONS


WIRING CODES

Range code


Lmm [in]

Xmm [in]

Dmm [in]

D1mm [in]

Tmm [in]

Total weightg [oz]

Armature weightg [oz]


HJ ±0,635 [±0.025] 35,05 [1.38] 27,94 [1.1] 9,53 [0.375] 1,91 [0.075] 19,05 [0.75] 14,17 [0.5] 1,28 [0.045] 2

HM ±2,54 [±0.1] 42,93 [1.69] 19,05 [0.75] 9,53 [0.375] 2,29 [0.09] 14,99 [0.59] 15,88 [0.56] 1,41 [0.05] 4

HN ±5,08 [±0.2] 55,88 [2.2*] 25,4 [1.0] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 17,86 [0.63] 1,98 [0.07] 4*

HF ±7,62 [±0.3] 57,91 [2.28] 29,97 [1.18] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 22,11 [0.78] 2,21 [0.078] 2

HG ±10,16 [±0.4] 63 [2.48] 32,51 [1.28] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 28,07 [0.99] 1,9 [0.067] 2

HP ±12,7 [±0.5] 79 [3.11] 34,8 [1.37] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 36,0 [1.27] 2,3 [0.081] 2

Wire color Supply



Blue Output

Green Output return


Cable shield is not connected to transducerFor reference only

5


Sensing and Control


Honeywell



+1-815-235-6847



Model M-5C AC-AC Miniature Displacement Transducer










Documents

Model PLVX AC-AC - Leading Distributor of Electronic ... · PDF fileEnhanced Precision Displacement Transducer Model PLVX AC-AC DESCRIPTION Model PLVX displacement transducer is designed