Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
PLFY-WP-VFM-EMODEL
DIh-2
AIR CONDITIONING SYSTEMS
Ceiling cassette (4-way flow type) Indoor units
PLFY-WP-VFM-E
MEES17K131 DIh-2 1
I.Ceiling cassette (4-way flow type)
1.SPECIFICATIONS ........................................................................................................................................... 2
2.EXTERNAL DIMENSIONS .............................................................................................................................. 4
3.CENTER OF GRAVITY ................................................................................................................................... 5
4.ELECTRICAL WIRING DIAGRAMS ................................................................................................................ 6
5.SOUND LEVELS ............................................................................................................................................. 75-1. Sound levels ........................................................................................................................................... 75-2. NC curves ............................................................................................................................................... 7
6.TEMPERATURE/AIRFLOW DISTRIBUTIONS................................................................................................ 86-1. Temperature distributions ....................................................................................................................... 86-2. Airflow distributions ................................................................................................................................. 9
7.ELECTRICAL CHARACTERISTICS.............................................................................................................. 10
8.OPTIONAL PARTS........................................................................................................................................ 118-1. Optional parts line up for the Indoor unit............................................................................................... 118-2. i-see Sensor corner panel..................................................................................................................... 118-3. Wireless signal receiver ........................................................................................................................ 11
0000004658.BOOK 1 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
1. SPECIFICATIONS Indoor unitsPL
FY-W
P-VF
M-E
2DIh-2
I.Ceiling cassette (4-way flow type)1. SPECIFICATIONS
Model PLFY-WP10VFM-E PLFY-WP15VFM-E PLFY-WP20VFM-EPower source
2.21.71.2kW*1Cooling capacity (Nominal)
(Nominal)
1,9001,5001,000kcal/h*17,5005,8004,100BTU/h*10.020.020.02kWPower input0.220.190.18ACurrent input2.51.91.4kW*2Heating capacity
2,2001,6001,200kcal/h*28,5006,5004,800BTU/h*20.020.020.02kWPower input0.170.140.13ACurrent input
External finishExternal dimension H × W × D
in.Net weightDecoration panel Model
External finish DimensionH × W × DNet weight
kg(lbs)
Heat exchangerLWater Volume
FAN Type × Quantity PammH2O
External static press.
Motor Type kWMotor output
Driving mechanism6.5-7.0-8.06.0-7.0-8.06.0-6.5-7.0nim/3m
in. in.
Air flow rate108-117-133230-247-282
100-117-133212-247-282
100-108-117212-230-247
27-29-3125-26-2925-26-27
s/L(Low-Mid-High) cfm
dB
Insulation materialAir filterProtection device Refrigerant control deviceConnectable outdoor unit/HBC controllerDiameter of water pipe
*3*4
*5
mm (in.) Field drain pipe size
Standard attachment
Drawing
Optional partsi-see Sensor corner panelWireless signal receiver
Remarks *Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred to the Installation Manual.*Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter1.Nominal cooling conditions kcal/h =kW x 860
BTU/h =kW x 3,412 Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.) cfm =m3/min x 35.312.Nominal heating conditions lbs =kg/0.4536
*Above specification data issubject to rounding variation.
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)3.Be sure to install a valve on the water outlet.4.Install a strainer (40 mesh or more) on the pipe next to the valve to remove the foreign matters.5.PLFY-WP-VFM-E should be used together with Decoration panel.6.Please group units that operate on 1 branch.
PAR-SF9FA-E
SLP-2FA/SLP-2FAE/SLP-2FAL/SLP-2FALEPAC-SF1ME-E
Installation Manual, Instruction BookInsulation pipe for water pipe,Washer, Drain hose, Tie band
DC motor0.05
Direct-driven by motor
PSPP honeycomb
Fuse-
HYBRID CITY MULTI/CMB-WP-V-GA1, CMB-WP-V-GB1Rc 3/4 screwRc 3/4 screw
O.D.32 (1-1/4) RK01B472BH79N085
-
Sound pressure level (measured in anechoic room)(Low-Mid-High)
Galvanized steel sheet208 × 570 × 570
8-1/4 × 22-1/ 2 × 22-1/213(29) 13(29)
SLP-2FA(L)(E)MUNSELL (1.0Y 9.2/0.2)
10 × 625 × 6253/8 × 24-5/8 × 24-5/8
3 (7)
14(31)
Cross fin (Aluminum fin and copper tube)0.5 0.5 0.9
Turbo Fan × 100
mm
in.kg(lbs)
mm
InletOutlet
Document
Decoration panel
WiringRefrigerant cycle
External
Accessory
1-phase 220-230-240V 50Hz1-phase 220V 60Hz
0000004658.BOOK 2 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
1. SPECIFICATIONS Indoor unitsPLFY-W
P-VFM-E
3DIh-2
MUNSELL (1.0Y 9.2/0.2)10 × 625 × 625
3/8 × 24-5/8 × 24-5/83 (7)
SLP-2FA(L)(E)
(Nominal)
(Nominal)
Model PLFY-WP25VFM-E PLFY-WP32VFM-EPower source
3.62.8kW*1Cooling capacity3,1002,400kcal/h*1
12,3009,600BTU/h*10.040.03kWPower input0.380.24ACurrent input4.03.2kW*2Heating capacity
3,4002,800kcal/h*213,60010,900BTU/h*2
0.040.02kWPower input0.330.19ACurrent input
External finishExternal dimension H × W × D
in.Net weightDecoration panel Model
External finish DimensionH × W × DNet weight
in.kg(lbs)
mm
kg(lbs)
Heat exchangerLWater Volume
FAN Type × Quantity FANPammH2O
External static press.
Motor Type kWMotor output
Driving mechanism6.5-9.0-12.06.5-7.5-9.0nim/3m
in. in.
Air flow rate108-150-200230-318-424
108-125-150230-265-318
27-33-41 27-30-34
s/L(Low-Mid-High) cfm
dB
Insulation materialAir filterProtection device Refrigerant control deviceConnectable outdoor unit/HBC controllerDiameter of water pipe
*3*4mm (in.) Field drain pipe size
Standard attachment
Drawing
Optional partsi-see Sensor corner panelWireless signal receiver
Remarks *Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred to the Installation Manual.*Due to continuing improvement, above specifications may be subject to change without notice.
Notes: Unit converter1.Nominal cooling conditions kcal/h =kW x 860
BTU/h =kW x 3,412 Indoor: 27°CD.B./19°CW.B. (81°FD.B./66°FW.B.), Outdoor: 35°CD.B. (95°FD.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.) cfm =m3/min x 35.312.Nominal heating conditions lbs =kg/0.4536
*Above specification data issubject to rounding variation.
Indoor: 20°CD.B. (68°FD.B.), Outdoor: 7°CD.B./6°CW.B. (45°FD.B./43°FW.B.) Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)3.Be sure to install a valve on the water outlet.4.Install a strainer (40 mesh or more) on the pipe next to the valve to remove the foreign matters.5.PLFY-WP-VFM-E should be used together with Decoration panel.6.Please group units that operate on 1 branch.
PAR-SF9FA-E
SLP-2FA/SLP-2FAE/SLP-2FAL/SLP-2FALEPAC-SF1ME-E
Installation Manual, Instruction BookInsulation pipe for water pipe,Washer, Drain hose, Tie band
DC motor0.05
Direct-driven by motor
PSPP honeycomb
Fuse-
HYBRID CITY MULTI/CMB-WP-V-GA1, CMB-WP-V-GB1Rc 3/4 screwRc 3/4 screw
O.D.32 (1-1/4) RK01B472BH79N085
-
Sound pressure level(Low-Mid-High)
Galvanized steel sheet208 × 570 × 570
8-1/4 × 22-1/ 2 × 22-1/214(31) 14(31)
Cross fin (Aluminum fin and copper tube)0.9 0.9
Turbo Fan × 100
mm
InletOutlet
Document
Decoration panel
WiringRefrigerant cycle
External
Accessory*5
(measured in anechoic room)
1-phase 220-230-240V 50Hz1-phase 220V 60Hz
0000004658.BOOK 3 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
2. EXTERNAL DIMENSIONS Indoor unitsPL
FY-W
P-VF
M-E
4DIh-2
2. EXTERNAL DIMENSIONS
PLFY-WP10, 15, 20, 25, 32VFM-EUnit: mm
0000004658.BOOK 4 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
3. CENTER OF GRAVITY Indoor unitsPLFY-W
P-VFM-E
5DIh-2
3. CENTER OF GRAVITY
200 [7-7/8]200 [7-7/8]200 [7-7/8]200 [7-7/8]200 [7-7/8]
260 [10-1/4]260 [10-1/4]260 [10-1/4]260 [10-1/4]260 [10-1/4]
85 [3-3/8]85 [3-3/8]85 [3-3/8]85 [3-3/8]85 [3-3/8]
PLFY-WP10VFM-EPLFY-WP15VFM-EPLFY-WP20VFM-EPLFY-WP25VFM-EPLFY-WP32VFM-E
X Y Z(mm) [in]
Model name
Water pipe side
Water pipe
PLFY-WP10, 15, 20, 25, 32VFM-E
0000004658.BOOK 5 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
4. ELECTRICAL WIRING DIAGRAMS Indoor unitsPL
FY-W
P-VF
M-E
6DIh-2
4. ELECTRICAL WIRING DIAGRAMS
PLFY-WP10, 15, 20, 25, 32VFM-E
0000004658.BOOK 6 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
5. SOUND LEVELS Indoor unitsPLFY-W
P-VFM-E
7DIh-2
5. SOUND LEVELS5-1. Sound levels
5-2. NC curves
* Measured in anechoic room.
PLFY-WP-VFM-E
1.5m
Measurement location
PLFY-WP10VFM-EPLFY-WP15VFM-EPLFY-WP20VFM-EPLFY-WP25VFM-EPLFY-WP32VFM-E
25-26-2725-26-2927-29-3127-30-3427-33-41
Sound level dB (A)Sound level at anechoic room: Low-Mid-High
50
Power Source: 220-230-240V 50Hz/220V 60HzExternal Static Pressure: 0Pa [0.00in.WG]PLFY-WP10VFM-E
50/60Hz
50/60HzLow50/60HzMiddle
High
Octave band center frequencies (Hz)
20-NC
30-NC
40-NC
continuous noiseaudible limit onApproximate minimum
Oct
ave
band
pre
ssur
e le
vel (
dB) 0
dB=2
0μPa
-NC
60-NC
8k4k2k1k50025012563
70.0
65.0
60.0
55.0
50.0
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
50
Power Source: 220-230-240V 50Hz/220V 60HzExternal Static Pressure: 0Pa [0.00in.WG]PLFY-WP15VFM-E
50/60Hz
50/60HzLow50/60HzMiddle
High
Octave band center frequencies (Hz)
20-NC
30-NC
40-NC
continuous noiseaudible limit onApproximate minimum
Oct
ave
band
pre
ssur
e le
vel (
dB) 0
dB=2
0μPa
-NC
60-NC
8k4k2k1k50025012563
70.0
65.0
60.0
55.0
50.0
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
50
Power Source: 220-230-240V 50Hz/220V 60HzExternal Static Pressure: 0Pa [0.00in.WG]PLFY-WP20VFM-E
50/60Hz
50/60HzLow50/60HzMiddle
High
Octave band center frequencies (Hz)
20-NC
30-NC
40-NC
continuous noiseaudible limit onApproximate minimum
Oct
ave
band
pre
ssur
e le
vel (
dB) 0
dB=2
0μPa
-NC
60-NC
8k4k2k1k50025012563
70.0
65.0
60.0
55.0
50.0
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
50
Power Source: 220-230-240V 50Hz/220V 60HzExternal Static Pressure: 0Pa [0.00in.WG]PLFY-WP25VFM-E
50/60Hz
50/60HzLow50/60HzMiddle
High
Octave band center frequencies (Hz)
20-NC
30-NC
40-NC
continuous noiseaudible limit onApproximate minimum
Oct
ave
band
pre
ssur
e le
vel (
dB) 0
dB=2
0μPa
-NC
60-NC
8k4k2k1k50025012563
70.0
65.0
60.0
55.0
50.0
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
50
Power Source: 220-230-240V 50Hz/220V 60HzExternal Static Pressure: 0Pa [0.00in.WG]PLFY-WP32VFM-E
50/60Hz
50/60HzLow50/60HzMiddle
High
Octave band center frequencies (Hz)
20-NC
30-NC
40-NC
continuous noiseaudible limit onApproximate minimum
Oct
ave
band
pre
ssur
e le
vel (
dB) 0
dB=2
0μPa
-NC
60-NC
8k4k2k1k50025012563
70.0
65.0
60.0
55.0
50.0
45.0
40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
0000004658.BOOK 7 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
6. TEMPERATURE/AIRFLOW DISTRIBUTIONS Indoor unitsPL
FY-W
P-VF
M-E
8DIh-2
6. TEMPERATURE/AIRFLOW DISTRIBUTIONS6-1. Temperature distributions
• PLFY-WP32VFM-E StandardFlow angle : 10° 4-way flowceiling height : 2.7 m
StandardFlow angle : 60° 4-way flowceiling height : 2.7 m
Note : These figures show typical temperature distributions in the conditions above. In the actual installation, they may differ from these figures under the influence of air temperature conditions, ceiling height, cooling/heating load,obstacles,etc.
0000004658.BOOK 8 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
6. TEMPERATURE/AIRFLOW DISTRIBUTIONS Indoor unitsPLFY-W
P-VFM-E
9DIh-2
6-2. Airflow distributions
PLFY-WP32VFM-E
Note : These figures show typical airflow distributions in the conditions above. In the actual installation, they may differ from these figures under the influence of air temperature conditions, ceiling height, cooling/heating load,obstacles,etc.
StandardFlow angle : 10° 4-way flowCeiling height : 2.7m
StandardFlow angle : 60° 4-way flowCeiling height : 2.7m
0000004658.BOOK 9 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
7. ELECTRICAL CHARACTERISTICS Indoor unitsPL
FY-W
P-VF
M-E
10DIh-2
7. ELECTRICAL CHARACTERISTICS
Symbols: MCA: Max.Circuit Amps (=1.25xFLA) FLA: Full Load AmpsIFM: Indoor Fan Motor Output: Fan motor rated output
PLFY-WP-VFM-EPower supply IFM
Volts Hz Range +-10% MCA(A) Output (kW) FLA(A)PLFY-WP10VFM-E
220-240V 50Hz220V 60Hz
Max.: 264VMin.: 198V
0.23 0.05 0.18PLFY-WP15VFM-E 0.24 0.05 0.19PLFY-WP20VFM-E 0.28 0.05 0.22PLFY-WP25VFM-E 0.30 0.05 0.24PLFY-WP32VFM-E 0.48 0.05 0.38
0000004658.BOOK 10 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131
8. OPTIONAL PARTS Indoor unitsPLFY-W
P-VFM-E
11DIh-2
8. OPTIONAL PARTS8-1. Optional parts line up for the Indoor unit
8-2. i-see Sensor corner panel
8-3. Wireless signal receiver
Description Model
PLFY-WP-VFM-Ei-see Sensor corner panelWireless signal receiver
PAC-SF1ME-EPAR-SF9FA-E
i-see Sensor provides comfortable space as it detects the floor temperature to prevent spotty temperature.And that enables the unit to save energy.AttentionMake sure that there are no gaps between the unit and the grille, and the grille and ceiling. It may cause dew dripping.
Item
Quantity
Shape
Plastic fastener
2
Detailed installation information should be referred to its Installation Manual.
i-see Sensor corner panel
1
Wireless signal receiver1
Wireless signal receiver PAR-SF9FA-E is necessary for using wireless remote controllerPAR-SF9FA-E is a corner panel with the signal receiver for wireless remote controller.
ItemQuantity
Shape
Detailed installation information should be referred to its Installation Manual.
0000004658.BOOK 11 ページ 2018年3月20日 火曜日 午後6時16分
Indoor units
12MEES17K131 DIh-2
0000004658.BOOK 12 ページ 2018年3月20日 火曜日 午後6時16分
MEES17K131New publication effective Mar. 2018
Specifications subject to change without notice
WarningDo not use refrigerant other than the type indicated in the manuals provided with the unit and on the nameplate.- Doing so may cause the unit or pipes to burst, or result in explosion or fire during use, repair, or at the time of disposal of the unit.- It may also be in violation of applicable laws.- MITSUBISHI ELECTRIC CORPORATION cannot be held responsible for malfunctions or accidents resulting from the use of the wrong
type of refrigerant.Our air conditioning equipment and heat pumps contain a fluorinated greenhouse gas, R410A.
■
■
MEES17K131_PLFY-WP-VFM-ECeiling cassette (4-way flow type)1. SPECIFICATIONS2. EXTERNAL DIMENSIONS3. CENTER OF GRAVITY4. ELECTRICAL WIRING DIAGRAMS5. SOUND LEVELS5-1. Sound levels5-2. NC curves
6. TEMPERATURE/AIRFLOW DISTRIBUTIONS6-1. Temperature distributions6-2. Airflow distributions
7. ELECTRICAL CHARACTERISTICS8. OPTIONAL PARTS8-1. Optional parts line up for the Indoor unit8-2. i-see Sensor corner panel8-3. Wireless signal receiver