1
Microcontroller Development, Demonstration Boards and Accessories MPLAB ® ICD 3 In-Circuit Debugger/Programmer The MPLAB ® ICD 3 (In-Circuit Debugger 3) allows debugging and programming of PIC ® and dsPIC ® digital signal controllers using the powerful graphical user interface of the MPLAB ® IDE (Integrated Development Environment), included with each kit. The MPLAB ® ICD 3 is connected to the design engineer’s PC using USB or RS-232 interface and can be connected to the target via an ICD connector. The connector uses two device I/O pins that are shared between in-circuit debugging and Integrated In Circuit Serial Programming . Features: USB (Full Speed 2 Mbits/s) and RS-232 Interface to Host PC Real-Time Execution MPLAB ® IDE Compatible (Free Copy Included) Built-In Over Voltage/Short Circuit Monitor Firmware Upgrade Available from PC/Web Download Totally Enclosed Supports Low Voltage to 2.0 Volts (2.0 to 6.0 Range) Diagnostic LEDs (Power, Busy, Error) Read/Write Program and Data Memory of Microcontroller Erase of Program Memory Space with Verification Freeze-Peripherals at Breakpoint MPLAB ® PM3 Universal Device Programmer The MPLAB ® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip’s entire line of PICmicro ® devices as well as the latest dsPIC30F DSC devices. When used stand-alone, data can be loaded and saved with the SD/MMC card (not included). These Key Features Included: RS-232 or USB Interface Integrated In Circuit Serial Programming (ICSP ) Interface Fast Programming Time Three Operating Modes: – PC Host Mode for Full Control – Safe Mode for Secure Data – Stand-Alone Mode for Programming without a PC Complete Line of Interchangeable Socket Modules to Support All Microchip Devices and Package Options (Sold Separately) SQTPsm Serialization for Programming Unique Serial Numbers While in PC Host Mode An Alternate DOS Command Line Interface Is Available for Batch Control Supports PRO MATE ® II Socket Modules via Adapter (Sold Separately) Large Easy-to-Read Display Field Upgrade Firmware Allows Quick New Device Support Secure Digital (SD) and Multimedia Card (MMC) Buzzer Notification for Noisy Environments Package Contents: Serial Cable for RS-232 PC Connection USB Cable for USB PC Connection ICSP Cable Power Supply and Power Cables MPLAB ® IDE Integrated Development Environment CD User’s Manual and Technical Documentation on CD AC162049 Universal Programming Module The Universal Programming Module (UPM) is a handy, low-cost tool to support programming of Flash-based microcontroller DIP packaged products from Microchip Technology using the MPLAB ® ICD 2 In-Circuit Debugger. It can also be connected to the PICSTART Plus, allowing programming of parts previously unsupported due to pin configuration issues. ZIF Socket Supports Up to 40-Pin Devices from 300 to 600 Mil Width MPLAB ® ICD 2 Connector PICSTART Plus Compatible Programming Modules AC164301 — This Socket Module Supports 8P, 14P, 18P, 28P and 40P DIP PIC ® Microcontroller or dsPIC ® Digital Signal Controller on MPLAB ® PM3 Programmer RoHS RoHS RoHS RoHS Stock No. Mfr.’s Type Description EACH 70045328 AC162049 Universal Programming Module 39.99 Stock No. Mfr.’s Type Description EACH 70046880 DV164035 MPLAB ® In-Circuit Debugger 3 Module (ICD 3 Module and USB Cable) 189.99 Stock No. Mfr.’s Type Description EACH 70045376 DV007004 MPLAB ® PM3 Universal Device Programmer 895.00 Stock No. Mfr.’s Type Description EACH 70045329 AC164301 18L/28L/40L DIP Socket Module for MPLAB ® PM3 189.99 70045330 AC164326 20L QFN Socket Module for MPLAB ® PM3 189.99 70046203 PCM12XB0 PIC12F629, 675 Processor Module for MPLAB ® ICE 2000 445.00 70046204 PCM12XC0 PIC12F683 Processor Module for MPLAB ® ICE 2000 445.00 70046205 PCM16YD0 PIC16F630, 676 Processor Module for MPLAB ® ICE 2000 445.00 70046206 PCM16YH0 PIC16F777, 767, 747, 737 Processor Module for MPLAB ® ICE 2000 445.00 70046207 PCM16YK0 PICF684 Processor Module for MPLAB ® ICE 2000 445.00 70046208 PCM16YL0 PIC16F688 Processor Module for MPLAB ® ICE 2000 445.00 70046209 PCM16YN0 PIC16F785 Processor Module for MPLAB ® ICE 2000 445.00 70046210 PCM16YQ0 PIC16F685, 688, 689, 690 Processor Module for MPLAB ® ICE 2000 445.00 24 SEMICONDUCTORS 1919 24 AUTOMATION & CONTROL INDEX ENCLOSURES POWER INTERCONNECT TEST & MEASUREMENT SEMICONDUCTORS OPTOELECTRONICS ASSEMBLY

Microcontroller Development, Demonstration Boards and ... · Microcontroller Development, Demonstration Boards and Accessories MPLAB® ICD 3 In-Circuit Debugger/Programmer The MPLAB

Embed Size (px)

Citation preview

Page 1: Microcontroller Development, Demonstration Boards and ... · Microcontroller Development, Demonstration Boards and Accessories MPLAB® ICD 3 In-Circuit Debugger/Programmer The MPLAB

Microcontroller Development, Demonstration Boards and Accessories

MPLAB® ICD 3 In-Circuit Debugger/Programmer

The MPLAB® ICD 3 (In-Circuit Debugger 3) allows debugging and programming of PIC® and dsPIC® digital signal controllers using the powerful graphical userinterface of the MPLAB® IDE (Integrated Development Environment), included with each kit. The MPLAB® ICD 3 is connected to the design engineer’s PC using USBor RS-232 interface and can be connected to the target via an ICD connector. The connector uses two device I/O pins that are shared between in-circuit debugging andIntegrated In Circuit Serial Programming™.

Features:� USB (Full Speed 2 Mbits/s) and RS-232 Interface to Host PC� Real-Time Execution� MPLAB® IDE Compatible (Free Copy Included)� Built-In Over Voltage/Short Circuit Monitor� Firmware Upgrade Available from PC/Web Download� Totally Enclosed

� Supports Low Voltage to 2.0 Volts (2.0 to 6.0 Range)� Diagnostic LEDs (Power, Busy, Error)� Read/Write Program and Data Memory of Microcontroller� Erase of Program Memory Space with Verification� Freeze-Peripherals at Breakpoint

MPLAB® PM3 Universal Device Programmer

The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip’s entire line of PICmicro®

devices as well as the latest dsPIC30F DSC devices. When used stand-alone, data can be loaded and saved with the SD/MMC card (not included).

These Key Features Included:� RS-232 or USB Interface� Integrated In Circuit Serial Programming™ (ICSP™) Interface� Fast Programming Time� Three Operating Modes:

– PC Host Mode for Full Control– Safe Mode for Secure Data– Stand-Alone Mode for Programming without a PC

� Complete Line of Interchangeable Socket Modules to Support All MicrochipDevices and Package Options (Sold Separately)

� SQTPsm Serialization for Programming Unique Serial Numbers While inPC Host Mode

� An Alternate DOS Command Line Interface Is Available for Batch Control� Supports PRO MATE® II Socket Modules via Adapter (Sold Separately)� Large Easy-to-Read Display� Field Upgrade Firmware Allows Quick New Device Support� Secure Digital (SD) and Multimedia Card (MMC)� Buzzer Notification for Noisy Environments

Package Contents:� Serial Cable for RS-232 PC Connection� USB Cable for USB PC Connection� ICSP™ Cable� Power Supply and Power Cables� MPLAB® IDE Integrated Development Environment CD� User’s Manual and Technical Documentation on CD

AC162049 Universal Programming Module

The Universal Programming Module (UPM) is a handy, low-cost tool to support programming of Flash-based microcontrollerDIP packaged products from Microchip Technology using the MPLAB® ICD 2 In-Circuit Debugger. It can also be connectedto the PICSTART Plus, allowing programming of parts previously unsupported due to pin configuration issues.

� ZIF Socket� Supports Up to 40-Pin Devices from

300 to 600 Mil Width

� MPLAB® ICD 2 Connector� PICSTART Plus Compatible

Programming Modules

� AC164301 — This Socket Module Supports 8P, 14P, 18P, 28P and 40P DIP PIC® Microcontroller or dsPIC® DigitalSignal Controller on MPLAB® PM3 Programmer

RoHS

RoHS

RoHS RoHS

StockNo.

Mfr.’sType Description EACH

70045328 AC162049 Universal Programming Module 39.99

StockNo.

Mfr.’sType Description EACH

70046880 DV164035 MPLAB® In-Circuit Debugger 3 Module (ICD 3 Module and USB Cable) 189.99

StockNo.

Mfr.’sType Description EACH

70045376 DV007004 MPLAB® PM3 Universal Device Programmer 895.00

StockNo.

Mfr.’sType Description EACH

70045329 AC164301 18L/28L/40L DIP Socket Module for MPLAB® PM3 189.9970045330 AC164326 20L QFN Socket Module for MPLAB® PM3 189.9970046203 PCM12XB0 PIC12F629, 675 Processor Module for MPLAB® ICE 2000 445.0070046204 PCM12XC0 PIC12F683 Processor Module for MPLAB® ICE 2000 445.0070046205 PCM16YD0 PIC16F630, 676 Processor Module for MPLAB® ICE 2000 445.0070046206 PCM16YH0 PIC16F777, 767, 747, 737 Processor Module for MPLAB® ICE 2000 445.0070046207 PCM16YK0 PICF684 Processor Module for MPLAB® ICE 2000 445.0070046208 PCM16YL0 PIC16F688 Processor Module for MPLAB® ICE 2000 445.0070046209 PCM16YN0 PIC16F785 Processor Module for MPLAB® ICE 2000 445.0070046210 PCM16YQ0 PIC16F685, 688, 689, 690 Processor Module for MPLAB® ICE 2000 445.00

24

SEMICONDUCTORS 1919

24

AU

TOM

ATIO

N&

CO

NTRO

LIN

DEX

EN

CLOSU

RESP

OW

ERIN

TERCON

NECT

TEST&

MEA

SUREM

ENT

SEM

ICONDUCTO

RSO

PTOELECTRO

NICS

ASSEM

BLY

1919-2014_QuarkCatalogTempNew 8/28/14 1:39 PM Page 1919