www.metalcraft.net.nz

Metalline Fascia 185mmMetalline Fascia 185mm is used on both eave line and gables in conjunction with Metalline Quad Gutter to provide a quality Fascia and

Gutter Solution. Metalline Fascia is also compatible with most gutter profiles and looks great with any residential roof finish. Metalline Fascia

is available in Zincalume, Colorsteel Endura and Colorsteel Maxx. Please consult your nearest Metalcraft branch for timberwork set out details

if you are unsure as there is some variances between different sized fascia systems.

Metalline Fascia 185mm with Metalline Quad Gutter = 5550mm² (A)

Metalline Fascia 185mm with Squareline Gutter = 6090mm² (B)

Metalline Fascia 185mm with Hiline Gutter = 7550mm² (C)

Metalline Fascia 185mm with Box Gutter 125mm = 8435mm² (D)

Hamilton, ChristchurchManufacturing Locations

Cross-sectional Area:

Note: The graph is based on a rainfall intensity of 100mm / hour and roof pitches less than 10 degrees. For more information on roof catchment areas and the effect of gutter cross sectional areas download the document on Roof Drainage

0800 ROOFNZ (0800 766369)Issue Date August 2008

Catc

hmen

t Are

a of

Roo

f (m

²)

A B C D

Cross Sectional Area of Gutter (mm²) in 000’s

External Gutter

Internal Gutter

Catchment Area of Roof v Cross Sectional Area of Gutter

185

16

38

0

50

100

150

200

250

300

350

400

0 2.5 5 7.5 10 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40

all dimensions are nominal

Metalline Fascia 185mm is available for purchase from all Metalcraft branch locations