Upload
duongkhanh
View
541
Download
7
Embed Size (px)
Citation preview
Replacement Parts List No. 055222700Revision D 01/2015
McQuay
Central Station Air HandlerLHD, LML, LSL, LWL, LYF, MMM, MSL, MWL
137-172Vintage C
Last Manufactured: 1984
To find your Daikin Applied parts distributor, call 1-800-377-2787 or visit www.DaikinApplied.com
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 2
Table of Contents
Parts List Revision History .............................................................................................. 3Model Number Nomenclature .......................................................................................... 4Serial Number Nomenclature ........................................................................................... 5Unit Code Index .............................................................................................................6- 8Coil Notes .......................................................................................................................... 9Sample Contractor Coil Code Strings ............................................................................. 9Fan Section Assembly Diagram ....................................................................................................... 10 Components ................................................................................................................. 11 Variable Inlet Vanes (Airfoil Fans Only) Diagram & Assemblies ................................................................................................. 12 Components ................................................................................................................. 13Low Leak Dampers Diagram & Assemblies ................................................................................................. 14 Components ................................................................................................................. 15
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 3
Revision Date Description
Parts List Revision History
A 2/99 Page 3 - Added Revision History page. Page 4 - Corrected location of Bubble #1 and Bubble #2. Page 5 - Added Airfoil Note above Bubble #1. Added "Airfoil" to Blower Wheel descriptions (Bubble #1 and #2). Corrected part number for 2-11/16" Drive Shaft (Bubble #4). B 3/02 Page 5 - Moved up the notes at the bottom of the page. No change in contents with exception of new revision. C 5/10 Converted file to current software and corrected formatting errors. Updated Cover and Revision page with current design logo. Reorganized form into sections and updated TOC. Page 4: Added Model Number Nomenclature section. Page 5: Added Serial Number Nomenclature section. Page 6- 8: Added Unit Code Index section. Page 9: Added Coil Section. Page 11: Changed footnote #1 to: "Part numbers ordered per Code Item on original G.O. Contact McQuay Parts with model and serial number information so the needed part(s) can becorrectlyidentified." Page 12: Changed footnote #1 to: "Assemblies include: Rods, Shafts, Bearings, Hardware & Miscellaneous Parts. For individual linkage parts, see Variable Inlet Vane Components listing." Page 14, 15: Added Low Leak Damper section. D 01/15 Cover, Rev pg.: Updated to Daikin Applied logo format. Various: Changed "McQuay Parts" to "Daikin Applied". Page 9: Rewrote coil notes. Reorganized page contents. Updated TOC. Page 14: Rewrote footnote #1.
Daikin Applied, 13600 Industrial Park Blvd., P.O. Box 1551, Minneapolis, MN 55440 (763) 553-5330
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 4
Model Number Nomenclature
LSL 1 37 C H
Number of Fans
Vintage
Unit TypeFirst Letter = Blower SectionSecond Letter = Unit TypeThird Letter = Coil Section
LSL = Low Pressure, Single Zone, Low PressureMSL = Medium Pressure, Single Zone, Low PressureLML = Low Pressure, Multi Zone, Low PressureMMM = Medium Pressure, Multi Zone, Medium PressureLWL = Low Pressure, Water Sprayed Coil, Low PressureMWL = Medium Pressure, Water Sprayed Coil, Low PressureLYF = Low Pressure, Ventilating, Draw Thru LHD = Low Pressure, Heating and Ventilating, Draw Thru
Nominal Coil Face Area (in Square Feet)
Air Intake into Blower SectionH = Horizontal Air IntakeV = Vertical Air IntakeI = Inverted
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 5
3 Z F 12345 00
Month of ManufactureA = JanuaryB = FebruaryC = MarchD = AprilE = MayF = JuneG = JulyH = August
Sequence Number
Engineering Revision3 = Faribault, MN9 = Scottsboro, AL
Serial Number Nomenclature
PlantIdentification
J = SeptemberK = OctoberL = NovemberM = December
Year of ManufactureA = 1971B = 1972C = 1973D = 1974E = 1975F = 1976G = 1977H = 1978J = 1979K= 1980L = 1981M = 1982N = 1983P = 1984Q = 1985
R = 1986S = 1987T = 1988U = 1989V = 1990W = 1991X = 1992Y = 1993Z = 19945 = 19956 = 19967 = 19978 = 19989 = 1999
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 6
Unit Code Index
Code 03= Fan Wheel and HousingA= Forward Curved Steel WheelB= Forward Curved Aluminum WheelC= Forward Curved Hot Dipped Galvanized WheelD= Airfoil WheelE= Forward Curved Steel Wheel with Mechanical Speed ControlF= Airfoil Wheel with Mechanical Speed ControlL= Forward Curved Wheel with Variable Inlet VanesV= Airfoil wheel with Variable Inlet Vanes
Code 04= Unit ArrangementDigit 1, Unit Arrangement H= Horizontal V= Vertical I= InvertedDigit 2, Cabinet (Does not apply to LSL/MSL) 1= Standard Fan CabinetDigit 3, Unit Options (Does not apply to LSL/MSL) 0= Basic Unit LH Air Intake (LYF Only) 0= Basic Unit LH, Bottom, or Top Air Intake (LHD Only) 0= Horizontal Discharge LH air Intake (LML/MMM Only) 1= Basic Unit RH Air Intake (LYF/LHD Only) 1= Horizontal Discharge RH air Intake (LML/MMM Only) 2= Vertical Discharge LH air Intake (LML/MMM Only) 3= Vertical Discharge RH air Intake (LML/MMM Only) 4= Internal Face & Bypass Top LH Air Intake (LHD Only) 5= Internal Face & Bypass Top or RH; RH, Bottom or Top Air Intake (LHD Only) 6= External Face & Bypass Top or LH Duct; LH, Bottom or Top Air Intake (LHD Only) 7= External Face & Bypass Top or RH Duct; RH, Bottom or Top Air Intake (LHD Only) 8= External Face & Bypass Bottom Duct; LH Air Intake (LHD Only) 9= External Face & Bypass Bottom Duct; RH Air Intake (LHD Only)Digit 4, Section Options (Does not apply to LSL/MSL) 1= No Access or Auxiliary Coil Section 1= No Access or Auxiliary Coil Section w/ 1 or 2 Row Coil (LHD Only) 2= Leaving Air Access Section, no Auxiliary Coil Section 3= No Access Section w/ Auxiliary Coil Section 4= Entering Air Acess Section w/ Auxiliary Coil Section 5= Leaving Air Access Section w/ Auxiliary Coil Section 8= No Access or Auxiliary Coil section w/ a 3 or 4 Row Coil
Code 05= Mounting ArrangementA= Top Mounting HolesB= Bottom Mounting Holes
Code 06= Fan Discharge and Motor Location1= CH 4= CCBH 7= CD2= CCH 5= CU 8= CCD3= CBH 6= CCU
Code 07= Motor Location Contact Daikin Applied if more information is required.
Code 08= Motor SizeA= .25 HP F= 1.5 HP L= 10.0 HP Q= 40.0 HPB= .33 HP G= 2.0 HP M= 15.0 HP R= 50.0 HPC= .50 HP H= 3.0 HP N= 20.0 HP S= 60.0 HPD= .75 HP J= 5.0 HP O= 25.0 HP T= 75.0 HPE= 1.0 HP K= 7.5 HP P= 30.0 HP
Code 09= Unit Voltage11= 115/60/1 21= 230/460/3 29= 230/60/312= 200/60/3 27= 460/60/3 37= 575/60/316= 115/230/60/1 28= 380/50/3
Code 10= Motor Base and BearingsY= None1= Rigid base, Ball Bearing
Code 11= Motor RPM and EnclosureY= NoneA= 1800 RPM, Open DripproofB= 1800 RPM, Totally Enclosed Fan CooledC= 1800 RPM, Explosion ProofD= 1800/900 RPM, Two Speed, One WindingE= 1800 RPM, Open Dripproof High Efficiency
Code 12= Motor Mounting Y= None 1= Factory Mounted Motor2= With Motor, Field Mounted3= Factory Mounted Motor 50HZ4= With Motor, Field Mounted 50HZ
Code 13= Fan/Fan Mount/Drive SelectionDigit 1, Fan and Drive Type Selection A= Variable Speed Drive (3-10HP LSL/MSL Only) B= Standard Forward Curve Fan, Isolated Fan mount, Variable
Speed Drive C= Optional Forward Curve Fan, Variable Speed Drive D= Airfoil Fan, Variable Speed Drive F= Airfoil Fan, Fixed Drive or Maxi-Drive F= Fixed Drive (15-75HP LSL/MSL Only) L= Standard Forward Curve Fan, Fixed Speed Drive M= Optional Forward Curve Fan, Fixed Speed DriveDigit 2 & 3, Drive Selection Contact Daikin Applied with model and serial number information
in order to identify the needed part(s).Digit 4, Fan Discharge 1= Code 06 equals 1, or 2 2= Code 06 equals 2, or 4 3= Code 06 equals 3, or 6 4= Code 06 equals 4, or 8
Code 14= Lubrication Lines & Insulation1= Standard Lube lines 1", 3/4# Insulation2= Standard Lube lines No Insulation3= Standard Lube lines 1", 1 1/2# Insulation4= Standard Lube lines 1", 3# Insulation5= Copper Lube Lines 1", 3/4# Insulation6= Copper Lube lines No Insulation7= Copper Lube Lines 1", 1 1/2# Insulation8= Copper Lube lines 1", 3# Insulation
Code 15= Not A Central Station Air Handler CodeY= None
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 7
Code 16= Accessory Arrangement Digit 1, Accessory Section Code 04= H*** or I*** Y= None A= Filter Section Only B, C, D= Filter Section and or Mixing Box with Dampers E, F, G= Filter Section and or Mixing Box without DampersDigit 1, Accessory Section Code 04= V*** Y= None H, K, M= Base Mounted Filter Section and or Mixing Box with Dampers J, L, N= Base Mounted Filter Section and or Mixing Box without DampersDigit 2, Filter Section 0= No Filters 1= Flat Filters End Removal 2= Flat Filters Right Side or Bottom Removal 3= Flat Filters Left Side or Top Removal 4= Angular Filters 5= Heavy Duty Angular FiltersDigit 3, Filter Type 0= None 1= Throwaway 2= Cleanable Low Velocity 3= Cleanable High Velocity 4= Throwaway, 35% Pleated
Code 17= Auxiliary Coil SectionY= NoneS= Small CoilL= Large Coil
Code 18= Auxiliary Coil Type and Rows For coil features see Contractor Coil codes in Unit Coil Section.YYYYYYYYYY= NoneXXXXXXXXXX= Special Coil
Code 19= Auxiliary Coil Connection LocationY= NoneD= Drive EndE= Opposite Drive End
Code 20= Standard Coil Section, 1st CoilY= NoneS= Small CoilL= Large CoilE= Extra Large Coil
Code 21= Coil Types and Rows, 1st Coil For coil features see Contractor Coil codes in Unit Coil Section.YYYYYYYYYYYYYYY= NoneXXXXXXXXXXXXXXX= Special Coil
Code 22= Coil Connection Location, 1st CoilY= NoneD= Drive EndE= Opposite Drive End
Code 23= Standard Coil Section, 2nd CoilY= NoneS= Small CoilL= Large CoilE= Extra Large Coil
Code 24= Coil Types and Rows, 2nd Coil For coil features see Contractor Coil codes in Unit Coil Section.YYYYYYYYYYYYYYY= NoneXXXXXXXXXXXXXXX= Special Coil
Code 25= Coil Connection Location, 2nd CoilY= NoneD= Drive EndE= Opposite Drive End
Code 26= Standard Coil Section, 3rd CoilY= NoneS= Small CoilL= Large CoilE= Extra Large Coil
Code 27= Coil Types and Rows, 3rd Coil For coil features see Contractor Coil codes in Unit Coil Section.YYYYYYYYYYYYYYY= NoneXXXXXXXXXXXXXXX= Special Coil
Code 28= Coil Connection Location, 3rd CoilY= NoneD= Drive EndE= Opposite Drive End
Code 29= Optional FeaturesY= None A= Gasketed Damper Blades on Mixing Box & Bypass DampersB= Outdoor Construction with WeatherhoodC= Flex Connector on Blower Intake F= Stainless Steel Drain Pan Liner K= Insulated Mixing BoxL= Items A & FM= Enclosed Belt GuardN= Insulated Filter SectionP= High Static Fan WheelQ= 16 ga. Minimum Panel Unit Construction W= Outdoor Construction less WeatherhoodX= Special
Unit Code Index, Continued
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 8
Code 30= Plug-In Door (Blower Section)Digit 1, Access Door Location Y= None 1= Top, Opposite Drive End 2= Side, Opposite Drive End X= SpecialDigit 2, Access Door Dimensions Y= None A= 8" x 9" B= 12" x 24" C= 18" x 24" X= Special
Code 31= Plug-In Door (Coil Section)YY= None6C= 18" x 24"7C= 18" x 24"XX= Special
Code 32= Miscellaneous Y= NoneX= Special
Unit Code Index, Continued
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 9
Coil Notes & Sample Contractor Coil Code Strings
Note: ALL Central Station Air Handlers use "Contractor" style coils. Contractor Coils are ordered as SEPARATE LINE ITEMS on the GO/General Order (Example: 976230-017), so they DO NOT have standard nine digit Daikin Applied part numbers.
When a replacement Contractor Coil is required a Contractor Coil Quote needs to be prepared. To quote a replacement Contractor Coil it is necessary to obtain model and serial number information from the unit nameplate and then contact Daikin Applied. If the unit has more than one coil it will be necessary to confirm which coil(s) are needed BEFORE quoting. Note that the sample code strings shown below are incomplete and DO NOT furnish enough information to correctly quote a Contractor Coil. GO and/or serial number information is required in order to properly quote a Contractor Coil.
In some instances, coils were manufactured separately from the unit and may have a unique serial number such as 9Z12345-00. A coil with a serial number starting with a "9" was built in Scottsboro AL and may or may not have been installed in a unit before shipment.
Sample Contractor Coil Code Strings
Coil Notes
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 10
3
4
2
5
Fan SectionAssembly Diagram
1
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 11
Bub.No.
PartNumber 172C164C150C141C137C
Description
N/S MOTOR 1
N/S BELT 1
N/S SHEAVES 1
N/S BUSHINGS 1
1 BLOWER WHEEL, AIRFOIL, NO. 27, CW 066543201 1 1 BLOWER WHEEL, AIRFOIL, NO. 30, CW 066543203 1 1 BLOWER WHEEL, AIRFOIL, NO. 33, CW 066543205 1 1 BLOWER WHEEL, AIRFOIL, NO. 36, CW 066543207 1 1
2 BLOWER WHEEL, AIRFOIL, NO. 27, CCW 066543202 1 2 BLOWER WHEEL, AIRFOIL, NO. 30, CCW 066543204 1 2 BLOWER WHEEL, AIRFOIL, NO. 33, CCW 066543206 1 2 BLOWER WHEEL, AIRFOIL, NO. 36, CCW 066543208 1 1
3 BLOWER HOUSING UNITS WITH INLET VANES 035543601 1 3 BLOWER HOUSING UNITS WITH INLET VANES 035543602 1 3 BLOWER HOUSING UNITS WITH INLET VANES 035543603 1 3 BLOWER HOUSING UNITS WITH INLET VANES 035543604 1 1
3 BLOWER HOUSING UNITS WITHOUT INLET VANES 031633401 1 3 BLOWER HOUSING UNITS WITHOUT INLET VANES 031633402 1 3 BLOWER HOUSING UNITS WITHOUT INLET VANES 031633403 1 3 BLOWER HOUSING UNITS WITHOUT INLET VANES 031633404 1 1
4 DRIVE SHAFT, 2-3/16 DIA. 53.81"L 035287901 1 4 DRIVE SHAFT, 2-7/16 DIA. 57.88"L 033172901 1 4 DRIVE SHAFT, 2-7/16 DIA. 62.00"L 032586301 1 4 DRIVE SHAFT, 2-11/16 DIA. 67.12"L 034270500 1 1
5 PILLOW BLOCK BEARING, 2-3/16" BORE 020648606 2 5 PILLOW BLOCK BEARING, 2-7/16" BORE 020648607 2 2 5 PILLOW BLOCK BEARING, 2-11/16" BORE 020648608 2 2 N/S INLET VANE ASS'Y., NO. 27, CW 2 032739300 1 N/S INLET VANE ASS'Y., NO. 30, CW 2 032739400 1 N/S INLET VANE ASS'Y., NO. 33, CW 2 032739500 1 N/S INLET VANE ASS'Y., NO. 36, CW 2 032739600 1 1 N/S INLET VANE ASS'Y., NO. 27, CCW 2 032738700 1 N/S INLET VANE ASS'Y., NO. 30, CCW 2 032738800 1 N/S INLET VANE ASS'Y., NO. 33, CCW 2 032738900 1 N/S INLET VANE ASS'Y., NO. 36, CCW 2 032739000 1 1
Unit Sizes - Pieces Per Unit
1 Part numbers ordered per Code Item on original G.O. Contact Daikin Applied with model and serial number information so the needed part(s) can be correctly identified.2 Part of housing assembly 0355436( _ _).N/S= Not Shown
Note: Each Airfoil Fan has (1) CW Wheel and (1) CCW Wheel
Fan SectionComponents
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 12
A
HORIZONTAL DISCHARGE SHOWN(Upblast Discharge slightly different in arrangement.)
A VIEW A-A(One side only shown)
10 6
12
9
8
7
11
Variable Inlet VanesDiagram & Assemblies 1
PartNumber 172C164C150C141C137C
Description
HORIZONTAL DISCHARGE 27" FAN 035285901 1 30" FAN 035285902 1 33" FAN 035285903 1 36" FAN 035285904 1 1 UPBLAST DISCHARGE 27" FAN 035286001 1 30" FAN 035286002 1 33" FAN 035286003 1 36" FAN 035286004 1 1
Unit Sizes - Pieces Per Unit
1 Assemblies include: Rods, Shafts, Bearings, Hardware & Miscellaneous Parts. For individual linkage parts, see Variable Inlet Vane Components listing.
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 13
Bub.No.
PartNumber 172C164C150C141C137C
DescriptionUnit Sizes - Pieces Per Unit
SHAFT-LEFT VANE LINKAGE TO RIGHT VANE LINKAGE 6 SHAFT WELD ASSEMBLY 27" FAN 035287800 1 6 SHAFT WELD ASSEMBLY 30" FAN 033173200 1 6 SHAFT WELD ASSEMBLY 33" FAN 035547800 1 6 SHAFT WELD ASSEMBLY 36" FAN 035282400 1 1 LINKAGE ROD-VANE TO SHAFT BELL ARM 7 .50" DIAMETER, 27.45" LONG 27" HORIZONTAL FAN 035281804 2 7 .50" DIAMETER, 29.45" LONG 27" UPBLAST FAN 035281805 2 7 .50" DIAMETER, 34.38" LONG 30" FAN 035281803 2 7 .50" DIAMETER, 42.50" LONG 33" FAN 035281801 2 7 .50" DIAMETER, 47.38" LONG 36" FAN 035281802 2 2 8 FLANGE BEARING, 1.00" BORE DIAMETER 020649301 2 2 2 2 2 9 BEARING BRACKET 035281300 2 2 2 2 2 10 BELL ARM 028370000 1 1 1 1 1 11 BALL JOINT, FEMALE 027671100 2 2 2 2 2 12 BALL JOINT, MALE 027671000 2 2 2 2 2
Variable Inlet VanesComponents
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 14
Low Leak DampersDiagram & Assemblies
5 Low Leak Damper Assembly 31 7/8" x 112 3/8" 048545101 1 5 Low Leak Damper Assembly 39 5/8" x 112 3/8" 048545001 1 1 5 Low Leak Damper Assembly 47 5/8" x 112 3/8" 048545701 1 1
172C164C150C141C137CDescription
PartNumber
Unit SizeBub.No.
Damper Assemblies 1
16
6
7
19
15
23
17
18
21
20
22
1 Note: NO Damper Actuators, Actuator Linkage, sensors, OR controls were supplied with Central Station Air Handler units. If a field supplied item is required, contact Daikin Applied with vendor and vendor part number information to see if a suitable replacement can be obtained.
Air Handler; LSL, MSL, MMM, etc. 137-172, Vintage C Rev. D 01/15 RPL 552227 / Page 15
Low Leak DampersComponents
6 Damper Blade (Less Gasket) 047793302 4 5 5 6 6 7 Damper Blade Center Support 047792401 1 Damper Blade Center Support 048545401 1 1 Damper Blade Center Support 048546001 1 1 15 Damper Blade Gasket Gasket ordered by the foot as required 029870900 - - - - - 16 Driven Damper Blade End Plug Assy. RH 044961208 1 1 1 1 1 17 Driven Damper Blade End Plug Assy. LH 044961209 1 1 1 1 1 18 Non Driven Damper End Plug RH 041003508 3 4 4 5 5 19 Non Driven Damper End Plug LH 041003509 3 4 4 5 5 20 Nylon Damper Blade Bushing 043730400 6 8 8 10 10 21 Nylon Damper Blade Drive Shaft Bushing 043734000 4 4 4 14 14 22 Nylon Linkage Bar Bushing 046098300 8 10 10 12 12 23 0.50" Locking Collar 049115902 2 2 2 2 2
172C164C150C141C137CDescription
PartNumber
Qty. for Unit SizeBub.No.