Matthew Atkinsons' updated resume 032211

8/7/2019 Matthew Atkinsons' updated resume 032211

http://slidepdf.com/reader/full/matthew-atkinsons-updated-resume-032211 1/3

Matthew Atkinson

[email protected] (614) 419.5303

SDA ELECTRONICS 01/09-01/11 Lead in charge of facilities: Make sure all incoming product to be

worked on is properly tagged/bar-coded and distributed to appropriate work cell. Set up production

line style pass/fail testing area and procedures for rush orders. Made sure repair floor was inspection

ready at all times, created PM and cleaning schedules for all repair floor work cells.

ATM tech: Clean, test and repair Triton NMD and TDM cash dispensers as well as the individual

components with-in unit. POS cash dispenser unit test/repair. Test, diagnose and repair of the CRT and

touch panel monitors in ATM and POS equipment.

Monitor tech: Dept. lead. Trouble-shoot, diagnose and repair ATM monitors, touch screens as well as

other customers' LCD, CRT and touch panels down to component level repair, including backlight and

TFT replacement.

Laptop test/repair tech: Test/Eval, diagnosis of all incoming laptops on pass/fail scale and parts

ordering. Repair of previously mentioned units as well as other incoming repairs. Tear down scrap units

for parts and input in system.

Power Supply tech: replace batteries and test incoming units, units that fail burn in are put aside for

further troubleshooting.

TAC World Wide- Lockheed Martin 06/05- 11/10

(nationwide travel) Electro-Mechanical Field Engineer

Responsibilities: Install, upgrade, and troubleshoot US Postal office mail sorting systems

nationwide. Diagnosis and troubleshooting a variety of equipment under time constraints, heavy

workloads, and sometimes hostile environments with very little notice of travel. It was also necessary to

remain onsite to assure that newly constructed systems ran properly to meet quality standards along

with training on site to Electronic Technicians. Required a strong demand for mechanical and electronic

integration, along with the ability to comprehend various manuals, diagrams, and schematics.

Performed preventive maintenance on all machinery built and trained USPS maintenance

personnel. Also performed the following duties of EN retro-fits: proximity switches, sensors, and

protective brackets, pneumatic and hydraulic pump systems. Along with those installations I took upon

the duties of shipping, receiving, and tracking of USPS property, inventory, lockout and tag out OSHA

safety standards, PEC flicker tests, run directed diagnostic tests, VFD parameter settings for speed motor

driven devices, camera and laser line detect frame installation, camera and laser line verification, and

installation of carrier cell drive pins. Wire machines with CAT 5, fiber optic as well as 110v and 480v.

Forklift license obtained. FSD lead and co-lead. Break down and rebuild of machines, working in

multiple areas of the machine with re-calibration of all areas worked. Clearance obtained. Extensive

use of forklift during whole deployment.

DS2-Lockheed Martin 12/07 01/08 Electronics technician II

Responsibilities: Read and interpret electronic schematics and instruction materials. Perform complex

diagnosis & repairs of electronic systems & components, soldering. Stationed at Tobyhanna Army Depot

in Tobyhanna, PA, we worked on Blue Force Tracking GPS for US military equipment and soldiers. ISO

9001 and 18001 certified facility. Secret clearance obtained.



Agissar Corp. 10/06-06/07 Field Service Technician

Observed operations of mail sorters at different client locations carried out preventative maintenance of

sorters and quickly took care of spontaneous problems that occurred while running. Planned for and

executed service activities on all assigned products, minimized equipment downtime to ensure optimum

customer service satisfaction. Assembled new sorter units, tested and calibrated for normal use. Held

lead responsibilities onsite.

Romanoff Electric '99 Electricians helper

Duties included drilling for, routing and pulling cable. Hook up cans, outlets and other household items

on both finish and roughs.

Zephyrus Electronics '95-'96 Electronics Assembler

Assembly and modification of paging receivers.

Specialized in the soldering of surface mount and through-hole resistors and capacitors, trace cut and

repair. I also worked on other projects that required a security clearance. Secret clearance obtained.

Solutions Staffing 07/00-04/01

Warehouse, load and unload freight manually and with forklift, employee and dock supervisor, checked

incoming and outgoing inventory, checked incoming freight accepted and unloaded freight.

Onsite Staffing '96 Mettler Toledo Electronics Assembly/ Technician,

Through hole PCB assembly by print, function and continuity testing on specific company built test

fixtures, trouble shooting of problems with PCBs.

TLG Electronics '96-'97 Specialized in cutting, prepping, termination and building of cables for various

accounts. Cable and wire harness assembly/repair. Construction of coax, switch boxes, electric panels,

and various other electronic components according to print. Quality control and continuity testing of

finished products. I was also involved in the training and review of co-workers. ISO 9000-9002 certified.

Chuck E Cheese 07/99-04/00 Electronics technician

Ensured video games and coin machines were functioning properly, cleaned and checked PCBs

U.S. Navy 4/00-06/01 Avionics Technician

Replaced and installed various avionics systems on F/A-18 A-D Hornets such as radar, HUD, DDI, FLIR,

encoder/decoders, and various day inspections, safety checks, installed mission flight

plans. Completed multiple tasks with an emphasis on teamwork.

Secret clearance obtained.

Tec Aide 09/01-11/01 Decision One - Checked functionality of single components as well as complete

computer systems that were returned for various reasons. Tested CPUs, hard drives, mother boards,

sound and video cards and many other areas of the computer system. Restored software after repairs

were done, provided written reports of problems as well as resolutions.



Sub Contractor 08/01-08/07 Renovation, demolition, cleaned carpets, roofing, drywall, finished

basements, cleaned up rental properties, wired houses for electric, prepared properties for sale or

rent. I was the lead person on crew, worked well and accomplished multiple tasks, finished multiple

locations with little or no supervision.

Manpower '99 Lockheed Martin electronic assembly, through-hole component assembly of PCBs

for PTI mail sorting machines according to print and build notes.

Dawson '97-'98 Dyna Lab solder finished PCBs and inspected finished product. ESD

compliant.

Remedy Staffing '04 ADL Technologies electronic assembly: assembled PCBs according to print,

soldering and inspection of finished boards.

Education

Tulsa Technology Center '95-'96

Electronics Assembly certificate

AC and DC circuits, solid state devices, soldering techniques, amp circuits, electronic circuits and

applications. A variety of test equipment was used during class instruction.

Soldering certificate obtained.

Devry University '96-'05

Electronics and computer technology/ Technical Business Management

Two semesters away from obtaining Associates Degree.

References

Edward Davis 614.316.9600 Kelly Brooksher 607.725.3645

Bryan Jeffcoat 702.916.6967 Gary Tomlin 614.209.1825

Garcia Lane 614.256.6276 Edgar Tirado 954.336.7635

Jerrod Weeks 614.390.1088 Sandy Bruce 614.596.0226

Documents

Matthew Atkinsons' updated resume 032211