2
MASTER MARINE, INC. WE DO THE JOB RIGHT , THE FIRST TIME Metal Fabricaon • 700 ton floang drydock • 220 ton Marine Traveliſt • Ouing buildings and • 12,000 sq. ſt. covered fabricaon sheds We have 900 ſt of water frontage and 18 ſt of water depth Pleasure Craſt In addion to building and repairing marine vessels, our experienced craſtsmen at Master Marine, Inc. can fabricate any metal project you require. Whether it is Steel, Aluminium or Stainless Steel we have mechanical engineers and naval architects that provide accurate drawings for successful project compleon. If you are looking for a place to bring your yacht, house boat, catamaran, or other type pleasure craſt to haul out for inspecon or repairs you can count on Master Marine, Inc. to provide the special care needed to liſt your vessel out of the water and place it on secure blocking. We can accomodate your repair requirements for washing and painng the underwater hull, pulling off propellers, shaſt work, valve and piping repairs and more. Don’t hesitate to give us a call at 251.824.4151. We can come to your vessel for a walk around survey and provide a quote based on the generated scope of work. 14284 Shell Belt Road, Bayou La Batre, Alabama 36509 at mile 117 GIWW 251.824.4151 Shipbuilding and Ship Repair Since 1961 VISIT US ONLINE AT WWW.MASTERMARINEINC.COM

Master Marine brochure

Embed Size (px)

DESCRIPTION

A brochure I designed and managed the printing for Master Marine.

Citation preview

Page 1: Master Marine brochure

MASTER MARINE, INC.

WE DO THE JOB RIGHT, THE FIRST TIME

Metal Fabrication

• 700 ton floating drydock• 220 ton Marine Travelift• Outfitting buildings and• 12,000 sq. ft. covered fabrication sheds

We have 900 ft of water frontage and 18 ft of water depth

Pleasure Craft

In addition to building and repairing marine vessels, our experienced craftsmen at Master Marine, Inc. can fabricate any metal project you require. Whether it is Steel, Aluminium or Stainless Steel we have mechanical engineers and naval architects that provide accurate drawings for successful project completion.

If you are looking for a place to bring your yacht, house boat, catamaran, or other type pleasure craft to haul out for inspection or repairs you can count on Master Marine, Inc. to provide the special care needed to lift your vessel out of the water and place it on secure blocking.

We can accomodate your repair requirements for washing and painting the underwater hull, pulling off propellers, shaft work, valve and piping repairs and more.

Don’t hesitate to give us a call at 251.824.4151. We can come to your vessel for a walk around survey and provide a quote based on the generated scope of work.

14284 Shell Belt Road, Bayou La Batre, Alabama 36509at mile 117 GIWW

251.824.4151

Shipbuilding and Ship Repair Since 1961VISIT US ONLINE AT WWW.MASTERMARINEINC.COM

Page 2: Master Marine brochure

GovernmentProjects

Master Marine, Inc. has been servicing government vessels and equipment for more than 20 years, including the U.S. Coast Guard, U.S. Air Force, U.S. Navy, U.S. Army Corps of Engineers, NOAA and National Marine Fisheries.

Master Marine, Inc. was the first commercial contractor to successfully perform Hull Sustainment Availablility work on U.S. Coast Guard 110 ft Island Class cutters bringing a cost savings to the agency.

We pride ourselves in working closely with agency contracting officers and engineering officers in getting the job done right and on time, while helping to bring constructive and practical solutions to any engineering changes that may be required.

Our supervisory staff have been with us more than 25 years and our experienced workforce bring their knowledge into each project with confidence.

Drydocking & Repairs

To better serve our customers we have upgraded our production facility and expanded our north yard to receive additional vessels hauled out with our Marine Travelift.

Master Marine, Inc. is ready to haul out your vessel with our new 220 ton Marine Travelift. The travel lift can accomodate vessels and barges up to 30 ft wide and up to 125 ft in length depending on the weight.

For larger vessels our 700 ton floating drydock (152 ft long x 46 ft clearance inside the wingwalls), newly constructed in 2012, is available for your OSV, pushboat, patrol boat, passenger vessel, barge or other large vessel.

Call us at 251.824.4151 for a quote on your next haul out. One of our sales representatives will work with you to develop the repair specifications needed for the job.

Shipbuilding

Over 300 vessels have been constructed and delivered to companies, government agencies, and hard working individuals on the east, west and Gulf coasts of the United States including Alaska, the northern coast of South America and the west coast of Africa.

Master Marine, Inc. builds vessels of all types large and small including inland and coastal pushboats, luggers and barges, OSV’s working the oil patch in the Gulf of Mexico, fisheries related, shrimping and longlining.