M a r t i n - S e n o u r P a i n t s

INDUSTRIALMAINTENANCEPROTECTIVE ENAMELS

Industrial Enamels by Martin-Senour® PaintsVisit the Martin-Senour® color selector for hundreds of additional colors.

Machinery Red MSTC-27(International Harvester Red)

Tawny Orange MSTC-28(Allis Chalmers Orange)

Gloss Medium Yellow MSTC-15

Yellow Earth MSTC-22(Caterpillar Yellow)

Granite MSTC-19(Ford Ferguson Gray)

Gloss Dark Blue† MSTC-6

Engine Gray MSTC-17(Machine Tool Gray)

Harvest Red MSTC-29(International Orange)

Machinery Green MSTC-20(John Deere Light Green)

Green Vistas MSTC-21(Vista Green Implement)

Gloss Gray† MSTC-8

Jet Blue MSTC-26(Ford Blue Implement)

Gray Deck MSTC-18(7-B Machine Tool GrayImplement)

Chrome Aluminum † MSTC-9

Gloss Dark Green† MSTC-7

Colors shown in this brochure are printed representations and therefore may vary slightly from actual paint colors.Green Vistas MSTC-21

Gloss Medium Yellow MSTC-15

Safety Color Enamels

Gloss Black † MSTC-1

Gloss Blue† MSTC-5

Gloss Red † MSTC-2

Industrial Primers

White Primer MSTC-10Tough Coat® Rust Control Universal Metal Primer

Brown Primer MSTC-11Tough Coat® Rust Control Universal Metal Primer

Red Primer MSTC-13Tough Coat® Quick Dry Alkyd Primer

Container Colors

Gloss Burgundy MSTC-23

Dark Pine MSTC-25

Container Blue MSTC-24

Gloss Brown† MSTC-4

O S H AO c c u p a t i o n a l S a f e t y & H e a l t h A d m i n i s t r a t i o n

A N S IA m e r i c a n N a t i o n a l S t a n d a rd s I n s t i t u t e

OSHA REDUsed to designate:• fire prevention equipment • fire alarm boxes• fire blanket boxes • fire buckets or pails• fire extinguishers • fire pumps, fire sirens, fire exit signs• fire sprinkler piping • (Industrial) fire hydrants• danger • stop (emergency) hazardous machines

OSHA YELLOWUsed to designate:• caution signs• exposed, unguarded edges of platforms, pits and walls• handrails, guardrails, top and bottom treads of stairways where caution is needed• pillars, posts or columns that could be struck• stripe along sides of freight cars leading plates or runways• areas to avoid slipping, tripping or collision

SAFETY REDUsed to designate:• danger• stop• emergency stop bars• stop buttons or electrical switches used for emergency stopping of machinery

SAFETY YELLOWUsed to designate:• material handling equipment, fork lifts, etc.• corner markets for storage piles• waste containers for combustible materials require yellow band around container• horizontal lips of vertically counterbalanced elevator doors• lower pulley blocks and cranes• coverings or guards of guy wires• vertical edge of horizontally sliding pairs of fire doors

SAFETY BLUEUsed to designate:• warnings such as painted barriers, flags, etc. should be located at the starting point or power source of machinery• elevators, ovens, vats and boilers• electrical controls, dryers, valves• tanks, kilns, vaults, scaffolding, ladders stopping of machinery

SAFETY GREENUsed to designate:• location of first aid dispensaries • location of first aid kits• location of gas masks • location of stretchers• safety bulletin boards • safety instruction signs• safety deluge showers or their location

BLACK & WHITEUsed to designate:• directional signs • combine with yellow for warning signs• clear floor areas around first aid • white corners for room or aisles• location and width of aisleways

Colors denoted are available as package colors in the following products: (†) Tough Coat® Alkyd Heavy Duty Enamel, ( ) Tough Coat® Quick Dry Alkyd Enamel,(•) Super Tough Coat® Acrylic Semi-Gloss Enamel, ( ) Super Tough Coat® Acrylic High Gloss Enamel, ( ) Super Tough Coat® Acrylic Prime & Finish

White• † MSW-2

Gloss Yellow † MSTC-3

Gloss Green MSTC-16

Gloss Orange MSTC-14

Gray Primer MSTC-12Tough Coat® Quick Dry Alkyd Primer

SAFETY ORANGEUsed to designate:• inside of movable guards such as picker guards in textile plants• inside of transmission for gears, pulleys, chains, etc.• exposed parts (edges only) of pulleys, gears, rollers, cutting devices, power jaws, etc.

150-0648-000 4/07

Martin-Senour® Industrial Primers and Enamels.

SUPER TOUGH COAT®

Acrylic Enamel A durable, flash-rust and corrosion resistant waterborne enamel for commercial and industrialmaintenance applications. This Direct-To-Metal formulation provides a hard film that isabrasion and chemical resistant. It controls rust while providing exceptional color and glossretention. Available in Semi-Gloss and High Gloss.

Acrylic Prime & Finish

Versatile waterborne acrylic primer and finish in one is durable, flash-rust and corrosionresistant, and provides excellent adhesion to metal and hard, glossy, slick surfaces such asbrushed aluminum, fiberglass, PVC and gloss enamel coatings. May be used as a primerunder water-based topcoats or alone as a low lustre finish.

Heavy Duty Alkyd Enamel

Highly durable, medium oil/alkyd all-purpose Direct-To-Metal enamel designed for commercialand industrial maintenance applications. This formulation provides fast drying for minimaldown time and gives a durable, corrosion resistant finish in light to moderate industrialenvironments. Available in Flat, Semi-Gloss and High Gloss.

Rust Control Universal Metal Primer

A tough, fast-drying, rust-inhibitive primer for bare, previously coated and rusted steel surfaces,this high-solids, low VOC primer may be used under both latex, oil/alkyd, epoxy and urethanecoatings. May be used as a barrier coat over coatings normally attacked by strong solvents inhigh performance coatings. For use on steel surfaces such as machinery, equipment, bar joists,piping, siding, doors and trim. Excellent as a shop primer.

For more information call 1.800.MSP.5270 or visit www.martinsenour.com© 2007 Martin-Senour Paints

SUPER TOUGH COAT®

TOUGH COAT®

TOUGH COAT®

M a r t i n - S e n o u r P a i n t s

INDUSTRIALMAINTENANCEPROTECTIVE ENAMELS