Upload
wilmer-torres
View
290
Download
10
Embed Size (px)
DESCRIPTION
manual instalacion vagcom VAG 5.1
Citation preview
Please read the whole of these instructions before trying to install ElsaWin
If each exe file is not ran as an administrator your installation will fail.
If you have a problem at one stage, stop and sort that stage out before continuing. If one stage fails the following stages are more likely to failIf you have any problems please let me know.
Create a folder called ElsaWin on a hard drive which has 75gb of free space. Place DVD 1 into your DVD drive. Copy and paste all the files from Dvd 1 into the ElsaWin folder.
Then place DVD 2 into your DVD drive.
Copy and paste all the files from Dvd 2 into the ElsaWin folder. Click yes to merge the 2 folders
Then place DVD 3 into your DVD drive. Some virus scanners will detect ELSA_Keygen.exe from the Keygen and serial number folder as a problem. If you need advice on how to get this exe copied let me know. One way would be to disconnect the computer from the internet and turn off your virus scanner until Elsawin is registered. This is done at the end of 4.00 installation. After you have used the Keygen to register Elsawin delete the Keygen and serial number folder, turn your virus scanner back on and run a quick scanner of the computer.
Copy and paste all the files from Dvd 3 into the ElsaWin folder. Click yes to merge the 2 folders
Then place DVD 4 into your DVD drive.
Copy and paste all the files from Dvd 4 into the ElsaWin folder. Click yes to merge the 2 folders
Repeat the copy and paste operation for the remaining 5 DVDS. After all 9 dvds are in the ElsaWin folder this is how the ElsaWin folder will look
Now you can delete from the ElsaWin folder which brands databases you do not want e.g. if you don’t want Seat delete that folder
You are now ready to start installing ElsaWin
Open the “Setup files ELSAWIN” folder and then the “1.Setup_CD_4.00” folder. Next run Elsa_40_Voll_Setup.exe as an administrator. Do not change any default settings bbgate, apos and apospro
When prompted enter your user details and one of these serial numbers
123-38679-40-0002088570-00031123-43940-40-0002088570-00031123-44989-40-0002088570-00031124-47304-40-0002088570-00031103-47401-40-0002088570-00031202-09580-40-0002088570-00031
Select any additional languages you want to install
Then let the program install.
Next, you will be prompted to activate the program.
Open the Keygen and serial number folder and prestart key generator ELSA_keygen.exe
Copy the 8-digit Provisional code from Elsawin into the key generator
Click “Get Code” will generate 8-digit a Final Code that must be entered in the field “The final code" in Elsawin and then click" OK ". This will register Elsawin
This is the only time in the installation that Elsawin will have to be registered
If you have turned your virus scanner off, now turn it back on
If each exe file is not ran as an administrator your installation will fail.
Open the “Setup files ELSAWIN” folder and then the “1.Setup_CD_4.10” folder. Next run Elsa_40_Voll_Setup.exe as an administrator. Do not change any default settings bbgate, apos and apospro
Now create a user by firstly opening the ElsaWin administration shortcut that’s on your desktop. When asked for a username and password enter admin in both boxes and click okay. Go to the services menu and select user setup
1. Next enter your name and what user name you want to use2. Check the administrator box and select the default language for the new user3. Enter and confirm the password for the new user4. Use the drop down arrows in both boxes to select 000 and 000005. You will then see a box to confirm your details, click next and on the next prompt screen
click create user.
You can now use the new user you have created to log into ElsaWin. As no databases have been installed yet, Elsawin will not display any brand specific information
Skip this next step if you do not want Seat installed
Open the Seat folder and then the SEAT_01.2014 folder. From that folder run setup.exe as an administrator. This will install the database for Seat cars
Skip this next step if you did not install Seat
Open the “Setup files ELSAWIN” folder and then the “1.Setup_CD_4.00” folder. Next run Elsa_40_Voll_Setup.exe as an administrator. Do not change any default settings bbgate, apos and apospro. Same as the first time 4.00 was installed but this time ElsaWin is registered so the install will be quicker and smoother
Skip this next step if you do not want Skoda installed
Open the Skoda folder and then the Skoda03.2012 folder. From that folder run setup.exe as an administrator. This will install the database for Skoda cars
Skip this next step if you do not want VW installed
1. Open the VW folder and then the Base_06.2013 folder. From that folder run setup.exe as an administrator. This will install the database for VW cars. This will take a long time.
2. Go back to the VW folder and into the VW_2014-01_UPDATE folder. From that folder run setup.exe as an administrator. This will install the updated database for VW cars
3. Go back to the VW folder and into the VW_2014-01_Update_FIX folder. This will install the updated database for VW cars
Skip this next step if you do not want VW commercial vehicles installed
1. Open the VW folder and then the NW 2013-06 folder. From that folder run setup.exe as an administrator. This will install the database for VW commercial vehicles
2. Go back to the VW folder and into the NW 2014-01_UPD folder. From that folder run setup.exe as an administrator. This will install the updated database for VW commercial vehicles
Do not skip this step it’s for all brands
Open the COMMON_FILES_2014-01 folder. From that folder run setup.exe as an administrator. This will install the information that is common to all brands
Skip this next step if you did not install Skoda
Open the SKODA 2012-03 update fix folder. From that folder run setup.exe as an administrator. This will install the update for the Skoda cars database. Without this update the Skoda cars database will not go into ElsaWin 5.
Do not skip the next 2 steps
The following programs must be installed on the computer before ElsaWin can be updated to version 5.0:
Microsoft Installer MSI 4.5 (or higher) should be installed
Microsoft .Net 3.5 SP1 (or higher) Download and install .net framework 4.5.1 if it’s not already installed
http://www.microsoft.com/en-gb/download/details.aspx?id=40779
Also install Microsoft® SQL Server® 2008 R2 SP2 http://www.microsoft.com/en-gb/download/details.aspx?id=30437 x86 file for a 32 bit system and x64 for a 64 bit system
Run Windows update to update SQL server and .NET 4.5.1
Microsoft Power Shell 1.0 (or higher) should be installed
1. Open the Setup files ELSAWIN folder and then the 3.UpdateCD_5.00 folder. In that folder run Elsa_50_Upd_Setup.exe as an administrator. Do not change any default settings bbgate, apos and apospro This installs the ElsaWin 5.0 update (a very, very long install as all the databases from 4.10 have to be moved into 5.0, at times nothing will seem to be happening but be patient)
2. Open the Setup files ELSAWIN folder and then the 4.UpdateCD_5.10 folder. In that folder run Elsa_51_Upd_Setup.exe as an administrator. Do not change any default settings bbgate, apos and apospro. This installs the ElsaWin 5.1 update and will not take too long.
Skip this next step if you do not want Audi installed
Open the Audi folder and then the 5.Base_03.2014 folder. From that folder run setup.exe as an administrator. This will install the database for Audi cars and will take a long time due to its size