20
5 th INTERNATIONAL TEXTILE, CLOTHING & DESIGN CONFERENCE Magic World of Textiles FINAL PROGRAMME Organized by: University of Zagreb Faculty of Textile Technology Zagreb, Croatia Under the Auspices of: President of the Republic of Croatia, Prof. Ivo Josipović, Ph.D. Ministry of Science, Education and Sport, Republic of Croatia, Zagreb, Croatia University of Zagreb, Zagreb, Croatia Croatian Academy of Engineering, Zagreb, Croatia DAAAM International, Vienna, Austria AUTEX, Ghent, Belgium AATCC, Research Triangle Park, USA ESCORENA, Poznan, Poland The Textile Institute, Manchester, UK Society of Dyers and Colourists, Bradford, UK Internacional Federation of Knitting Technologists, Reutlingen, Germany Croatian Society of Chemical Engineers, Zagreb, Croatia Croatian Chamber of Economy, Zagreb, Croatia CARNet, Zagreb, Croatia Dubrovnik, CROATIA October 3 rd to October 6 th , 2010

Magic World of Textiles - gradozero.eu5th INTERNATIONAL TEXTILE, CLOTHING & DESIGN CONFERENCE Magic World of Textiles FINAL PROGRAMME Organized by: University of Zagreb Faculty of

  • Upload
    others

  • View
    15

  • Download
    0

Embed Size (px)

Citation preview

5th INTERNATIONAL TEXTILE, CLOTHING & DESIGN CONFERENCE

Magic World of Textiles

FINAL PROGRAMME

Organized by:

University of ZagrebFaculty of Textile Technology

Zagreb, Croatia

Under the Auspices of:

President of the Republic of Croatia, Prof. Ivo Josipović, Ph.D.

Ministry of Science, Education and Sport, Republic of Croatia, Zagreb, CroatiaUniversity of Zagreb, Zagreb, Croatia

Croatian Academy of Engineering, Zagreb, CroatiaDAAAM International, Vienna, Austria

AUTEX, Ghent, BelgiumAATCC, Research Triangle Park, USA

ESCORENA, Poznan, PolandThe Textile Institute, Manchester, UK

Society of Dyers and Colourists, Bradford, UKInternacional Federation of Knitting Technologists, Reutlingen, Germany

Croatian Society of Chemical Engineers, Zagreb, CroatiaCroatian Chamber of Economy, Zagreb, Croatia

CARNet, Zagreb, Croatia

Dubrovnik, CROATIAOctober 3rd to October 6th, 2010

3

The Faculty of Textile Technology, University of Zagreb, has or-ganised the 5th International Textile, Clothing and Design Confer-ence in Dubrovnik, making our wish that the conference (ITC&DC) become a traditional one real. This conference is aimed at open-ing new roads in the development of global textiles, garment and fashion design, and to offer most recent knowledge to those who are able to use it.

Out of all the papers received, the International Review Committee has accepted 168 papers from 36 countries. They are printed in their integral form in the Book of Proceedings of the 5th ITC&DC 2010, and will be presented in one of the following sections:

A - Textile Fibres and Advanced MaterialsB - Manufacture of Yarns, Fabrics and NonwovensC - Textile Finishing, Dyeing and Care D - Clothing Technologies and EngineeringE - Analysis, Testing and Quality ControlF - Design and Marketing of Textile and ClothingG - Environment Protection, Ecology and Energy Management

We would like to express our sincerest thanks to all the participants for their valuable contribution and readiness to spend a part of their time in Dubrovnik, making the picture of the Magic World of Textiles more valuable and more real.

ITC&DC Team will try to do everything necessary to realise the aims of the Conference and to make all the participant feel wel-come guests in Croatia.

Welcome to Dubrovnik!

ITC&DC Team

4

International Scientific/Programme Committee of the 5th ITC&DC 2010

President: Ivo SOLJAČIĆ, University of Zagreb, Zagreb, Croatia

Members:Dominique C. ADOLPHE, ENSISA, Mulhouse, FranceMário Duarte de ARAUJO, University of Minho, Guimaraes, PortugalAleksa BJELIŠ, University of Zagreb, CroatiaHans-Jürgen BUSCHMANN, German Textile Research Centre North-West, Krefeld, GermanyAntonela CURTEZA, University of Iassy, Iassy, RomaniaKrste DIMITROVSKI, University of Ljubljana, Ljubljana, SloveniaZvonko DRAGČEVIĆ, University of Zagreb, Zagreb, CroatiaJelka GERŠAK, University of Maribor, Maribor, SloveniaRichard HORROCKS, University of Bolton, Bolton, Great BritainHüseyin KADOGLU, Ege University, Izmir, TurkeyBranko KATALINIĆ, Vienna University of Technology, Vienna, AustriaRyszard M. KOZLOWSKI, Institute of Natural Fibres & Medicinal Plants, Poznan, PolandSilvija KUKLE, Riga Technical University, Riga, LatviaAnatoly V. KULICHENKO, St Petersburg State University of Technology and Design, St Petersburg, RussiaRaechel LAING, University of Otago, Dunedin, New ZealandAnton MARCINČIN, Slovak Technical University, Bratislava, SlovakiaHeikki MATTILLA, Tampere University of Technology, Tampere, FinlandJiri MILITKY, Technical University of Liberec, Liberec, Czech RepublicRon POSTLE, University of New South Wales, Sydney, AustraliaDarko UJEVIĆ, University of Zagreb, Zagreb, CroatiaNorma STARSZAKOWNA, The London Institute, London, Great BritainGeorge STYLIOS, Herriot-Watt University, Galashiels, Great BritainXiaoming TAO, Hong Kong Polytechnic University, Hong Kong, ChinaSavvas G. VASSILIADIS, Technological Education Institute of Piraeus, Athens, GreeceXungai WANG, Deakin University, Geelong Victoria, AustraliaCharles Q. YANG, The University of Georgia, Athens, United States of America

International Review Committee of the 5th ITC&DC 2010Albert ABBOTT (US); Marija Jose ABREU (PT); Dominique C. ADOLPHE (FR); Maja ANDRASSY (HR); Aleksandra ANIĆ-VUČINIĆ (HR); Tomislav BAKRAN (HR); Sandra BISCHOF VUKUŠIĆ (HR); Slavica BOGOVIĆ (HR); Hans Jürgen BUSCHMAN (DE); Antonela CURTEZA (RO); Ružica ČUNKO (HR); Krste DIMITROVSKI (SI); Zvonko DRAGČEVIĆ (HR); Petra FORTE TAVČER (SI); Petra FRANITZA (DE); Jelka GERŠAK (SI); Marija GORENŠEK (SI); Bhuvenesh C. GOSWAMI (US); Diana GREGOR SVETEC (SI); Peter HAUSER (US); David HINKS (US); Richard HORROCKS (UK); Anica HURSA ŠAJATOVIĆ (HR); Jasenka JELENČIĆ (HR); Sung Hoon JEONG (KR); Hüseyin KADOGLU (TR); Drago KATOVIĆ (HR); Radko KOVAR (CZ); Ryszard KOZLOWSKI (PL); Silvia KUKLE (LV); Raechel LAING (NL); Jin LI (CN); Johanna LOUWAGIE (BE); Biljana MANGOVSKA (MK); Anton MARCINČIN (SK); Heikki MATTILA (FI); Rui MIGUEL (PT); Jiři MILITKY (CZ); Manuela NEVES (PT); Roger NG (CN); Ivan NOVAK (HR); Klaus OPWIS (DE); Zvonko OREHOVEC (HR); Đurđica PARAC-OSTERMAN (HR); Željko PENAVA (HR); Slavenka PETRAK (HR); Igor PETRUNIĆ (CA); Ron POSTLE (AU); Vesna Marija POTOČIĆ-MATKOVIĆ (HR); Dagmara PRIBERGA (LV) Tanja PUŠIĆ (HR); Tatjana RIJAVEC (SI); Dubravko ROGALE (HR); Tomislav ROLICH (HR); Eckhard SCHOLLMEYER (DE); Majda SFILIGOJ SMOLE (SI); Nina Katarina SIMONČIČ (HR); Zenun SKENDERI (HR); Ivo SOLJAČIĆ (HR); Urška STANKOVIĆ-ELESINI (SI); Norma STARSZAKOWNA (UK); Maja STRACENSKI KALAUZ (HR); George K. STYLIOS (UK); Dunja ŠAJN GORJANC (SI); Željko ŠOMOĐI (HR); Xiaoming TAO (CN); Andy TAYLOR (UK); Antoneta TOMLJENOVIĆ (HR); Vesna TRALIĆ-KULENOVIĆ (HR); Lieva VAN LANGENHOVE (BE); Bojana VONČINA (SI); Edita VUJASINOVIĆ (HR); Charles YANG (US); Aristotelis ZAMPETAKIS (GR); Daniela ZAVEC PAVLINIĆ (SI); Malgorzata ZIMNIEWSKA (PL).

5

Organizing Committee of the 5th ITC&DC 2010 (ITC&DC Team)

Zvonko DRAGČEVIĆ – President, Nikola VULJANIĆ - Vice-president, Anica HURSA ŠAJATOVIĆ, Zorana KOVAČEVIĆ, Bojan MAUSER, Bosiljka ŠARAVANJA, Tanja TISAJ, Srđan VLATKOVIĆ, Edita VUJASINOVIĆ

Coordinators of the 5th ITC&DC 2010:

Section A: Textile Fibres and Advanced Materials: Jiri MILITKYSection B: Manufacture of Yarns, Fabrics and Nonwovens: Krste DIMITROVSKISection C: Textile Finishing, Dyeing and Care: Charles Q. YANG Section D: Clothing Technologies and Engineering: Jelka GERŠAK Section E: Analysis, Testing and Quality Control: Dominique C. ADOLPHESection F: Design and Marketing of Textile and Clothing: Antonela CURTEZASection G: Environment Protection, Ecology and Energy Management: Hans Jürgen BUSCHMAN

Chairpersons Coordinator: Bojan MAUSER

Registration desk: Anica HURSA ŠAJATOVIĆ & Edita VUJASINOVIĆ

Technical assistance: Bojan MAUSER & Srđan VLATKOVIĆGENERAL INFORMATION

5th ITC&DC 2010 will start on Sunday, October 3rd to Wednesday October 6th, 2010 in the Centre for Advanced Academic Studies (CAAS) in the heart of the historic city centre of Dubrovnik (area Pile), Don Frane Bulica Street 4 (see map).Information desk is in operation at the CAAS during the Conference. All details and necessary information on the contents and schedule of the Conference, as well as other relevant matter, will be available there for the participants and guests.

6

12:00 – 20:00 Registration of authors and other participants19:30 – 20:00 Meeting of International Scientific Committee and Coordinators of

Sections (Conference Hall 2)19:30 – 20:00 Meeting of Chairpersons (Conference Hall 1)20:00 – 21:30 Welcome party (CAAS)

Sunday, October 3rd, 2010, Arrival day

Monday, October 4th 201007:30 – 09:00 Registration of authors and other participants09:00 – 09:30 Opening ceremony (Conference Hall 1)09:30 – 10:30 Plenary lecture (Conference Hall 1)

Coffee break10:30 – 11:0011:00 – 13:00 Oral presentation – Section A, F & E

A1 – A6 F1 – F5 E1 – E613:00 – 15:00 Conference lunch (Restaurant MIMOZA)15:00 – 17:00 Oral presentation – Section A, F & E

A7 – A13 F6 – F11 E7 – E1317:00 – 18:00 Poster presentations and discussion - Section A, F & E (with refreshments)

AP1 – AP15 EP1 – EP19FP1 – FP1220:00 Evening entertainment (Concert in St. Dominic`s Church)

Wednesday, October 6th, 201010:00 Official ITC&DC Excursion for authors and other participants (Port GRUŽ)

Coffee break

Tuesday, October 5th, 2010Oral presentation – Section A, C & E09:00 –10:30

A14 – A18

11:00 – 13:0010:30 – 11:00

Oral presentation – Section D, C & GD1 – D4 C5 – C9 G1 – G4

13:00 – 15:00 Conference lunch (Restaurant MIMOZA)15:00 – 16:30 Oral presentation – Section D, C & B

D5 – D8 C10 – C14 B1 – B4

16:30 – 17:30

16:30 – 17:30

Poster presentations and discussion - Section D, C, G & B (with refreshments)

Meeting of FP7 - REGPOG - 2008-1-229801: T-Pot Management Team (Conference Hall 2)

DP1 – DP10 CP1 – CP14 GP1 – GP5 BP1 – BP717:30 – 18:30 Closing ceremony (Conference Hall 1)

20:30 Conference dinner (Restaurant MIMOZA)

C1 – C4 E14 – E18

7

Monday, October 4th 201009:30 – 10:30 Plenary lecture (Conference Hall 1)

11:00 – 13:00 Section A: Textile Fibres and Advanced Materials (Conference Hall 1)Chair person: Anna UJHELYIOVA

A1 BALOGOVÁ Ľudmila & ŽÚŽI Bohusav Superabsorbing Fibres in Nonwovens

A2 CAYUELA Diana; MONTERO Lucila Araceli & MANICH Albert M. Variation of Microstructure of Textured and Fixed Polylactide Fibres with the

Texturing ConditionsA3 CZAPLICKI Zdzislaw & KOZLOWSKI Ryszard

Innovative Textile TechnologiesA4 DE SCHOENMAKER Bert; DE VRIEZE Sander; VAN DER SCHUEREN Lien & DE CLERCK Karen

Towards Steady State ElectrospinningA5 ELNASHAR ElSayed Ahmed & BELAL B. ElSayed

New Approach of Eyes’s Swath and Diapers for Infant’s Incubators of Bio-Nonwoven Fabrics

A6 FRYDRYSIAK Michał; ZIEGLER Stefan; GNIOTEK Krzysztof & ZIĘBA Janusz The Modeling of Textile Layers in Textronic Clothing

11:00 – 13:00 Section F: Design and Marketing of Textile and Clothing (Conference Hall 2)Chair person: Ausma VILUMSONE

F1 ABREU Maria José & LOPES Mellissa The Shop Window Dressing as a Tool for Visual Merchandising

F2 CURTEZA Antonela; TEODORESCU Mirela; PETCU Ioana & CALIN Monica An Approach of Innovation Through Design

F3 EL GHOLMY Sherwet; BONDOK Noha & EL GEIHEINI Adel Optimization of Embroidery Design on Denim Fabrics

F4 PEREIRA R. Maria Madalena; AZEVEDO Susana; BERNARDO Vera; MOREIRA DA SILVA Fernando; MIGUEL Rui & LUCAS José

The Effect of Visual Merchandising on Fashion Stores in Shopping CentresF5 PRIBERGA Dagmara

Lace Item Systematization and Classification in the Territory of Latvia

ROGALE Dubravko Research and Development of Article of Clothing with Adaptive Microclimatic Conditions

Chair persons: Ivo SOLJAČIĆ, Jelka GERŠAK & Aleksa BJELIŠ

11:00 – 13:00 Section E: Analysis, Testing and Quality Control (Conference Hall 3)Chair person: Jose MENDES LUCAS

E1 CARVALHO Lurdes; MIGUEL Rui; FIADEIRO Paulo; LUCAS José; TRINDADE Isabel & SANTOS SILVA Manuel

Objective Evaluation of Clothing Pilling Formation by Optical Profile AnalysisE2 CEYLAN Özgür; LANDUYT Lieve Van & DE CLERCK Karen

Small Scale Tests to Evaluate Cotton FibresE3 FRANITZA Petra; HIERHAMMER Marian & NAUMANN Romy

Textile Testing for Degradation of Air Cargo NetsE4 FRYDRYCH Iwona & CIESLAK Daria

Properties of Multilayer Textile Membrane Structures Destined For ShoesE5 GERŠAK Jelka & MARČIČ Milan

Study of Elastic Behaviour of Textile StructuresE6 KAVKLER Katja; GUNDE CIMERMAN Nina; ZALAR Polona & DEMŠAR Andrej

Biodeterioration of Historical Textiles

8

15:00 – 17:00 Section A: Textile Fibres and Advanced Materials (Conference Hall 1)Chair person: Zdzislaw CZAPLICKI

A7 GRIGORIU Ana-Maria; RACU Cristina; DIACONESCU Rodica & GRIGORIU Aurelia Optimization of Mechanical Characteristics of Scoured Hemp Yarns Grafted with

Monochlorotriazinyl-Βeta-CyclodextrinA8 HWANG Soondong & JEONG Sunghoon

Electrospinning of Poly(Lactic Acid) with Co-SolventsA9 KAAPPA Emma; MYRY Manu; KARINSALO Tapio; GRÉN Sanni; HALME Aki & VANHALA Jukka

Mass Production Methods of a Smart Insole for Plaster Cast Protective ShoeA10 KRIŠTOFIČ Michal; UJHELYIOVÁ Anna; RYBA Jozef & VASSOVÁ Iveta

Mechanical Properties of PA 6 and PP Fibres Functionalized with Copolyamides + Nanoclay

A11 LESKOVŠEK Mirjam & STANKOVIČ ELESINI Urša Preformulation of Input Components for Spinning of Polypropylene

Fibres with MicrocapsulesA12 MANEA Liliana Rozemarie; PANTILIMONESCU Florin; DELIU Roxana & SCARLET Roxana

Wireless System for the Monitoring of the Neuromotor Recovery Processes Based on Electrical Stimulation

A13 MARCINČIN Anton; MARCINČIN Konštantín & HRICOVÁ Marcela Spinning, Mechanical and Thermal Properties of Polypropylene Fibres

15:00 – 17:00 Section F: Design and Marketing of Textile and Clothing (Conference Hall 2)Chair person: Adel EL GEIHEINI

F6 ELNASHAR A. Elsayed; NASEF A. Arafa; SALEEM M. Elsayed & LIU Yan A Unified Stretch Theory of Ancient Clothes on Some Basic Knowledge for

Fashion Dresses Design F7 RAMOS KALMAR Elizabeth

Case Study: Design of Special Coffee PackagingF8 SANTOS Andreia; MIGUEL Rui; AZEVEDO Susana; PEREIRA Madalena & LUCAS José

Design and Consumers Behaviour Strategy of Luxury Fashion Brands – A Case StudyF9 TRATNIK Miroslav; STRACENSKI KALAUZ Maja & NEDANOV Aleksandar

Personal Perception of the Most Important Conscious Restrained Factor of Young People for Apparel Purchase

F10 TURCO Elena; GIACOMELLI Marco & FEDERIGHI Pamela Re-Thinking of NiTi Alloys for Textile Applications

F11 TURHAN Gülden & YILMAZ CengizRisk Perceptions and Brand Extension Success

15:00 – 17:00 Section E: Analysis, testing and quality control (Conference Hall 3)Chair person: Iwona FRYDRYCH

E7 KUCUKALI OZTURK Merve; UYGUN NERGIS Banu & CANDAN Cevza Analysis of Sound Absorption of Plain Knitted Fabrics from Chenille Yarns

E8 LOGAR Daša; ZUPIN Živa; URBAS Raša & DIMITROVSKI Krste UV Protective Properties of Woven Fabrics with Biodegradable Yarns in Their

Structure as WeftE9 LUCAS José; MIGUEL Rui; FIADEIRO Paulo; DE LURDES CARVALHO Maria; SANTOS SILVA

Manuel & MENDES António Fabric Wrinkling Evaluation by Optical Means

E10 LUCAS José; PIO Ana; MIGUEL Rui; PEREIRA Madalena; TRINDADE Isabel & SANTOS SILVA Manuel

Optical Evaluation of Dimensional Stability of Fabrics

9

Monday, October 4th 2004

17:00 – 18:00 Poster presentationSection A: Textile Fibres and Advanced Materials

AP1 ADOMAVIČIŪTĖ Erika; BANUŠKEVIČIŪTĖ Aušra & MILAŠIUS Rimvydas The Influence of Delivery Speed of Support Material on Structure of PU Nanofibre mat

Manufactured by Electrospinning MethodAP2 ANDRASSY Maja; ŠURINA Ružica & BUTORAC Jasminka

Influence of Agroecological Conditions on the Properties of Flax Fibres in CroatiaAP3 BUTORAC Jasminka; ŠURINA Ružica; ANDRASSY Maja; AUGUSTINOVIĆ Zvjezdana &

POSPIŠIL Milan Some Agronomic and Textile Properties of Flax Cultivated in Croatia (Krizevci)

AP4 DELIU Roxana; MANEA Liliana Rozemarie; CRAMARIUC Bogdan & SCARLET Roxana Potential Applications of Nanofibers - Advantages and Challenges

AP5 DELIU Roxana; MANEA Liliana Rozemarie; CRAMARIUC Bogdan & SCARLET Roxana Tehnologies for Obtaining Nanofibers

AP6 FREIVALDE Liga; KUKLE Silvija; PURINA Brigita & STRAMKALE Veneranda Durability Properties of Hemp Fibers

AP7 HUDÁK Jozef; KRIVOŠ Štefan & ZIMANY Vladimír PP Textile Fibres with Barrier Protection

AP8 MANEA Liliana Rozemarie; CRAMARIUC Bogdan; SCARLET Roxana & DELIU Roxana Computer-Controlled Electrospinning System for Nanofibers Manufacturing

AP9 RIVA Ascensión; PRIETO Remedios; MONTERO Lucila Araceli & CAYUELA Diana Dyeing Behaviour of Polylactide Fibres and its Relation with Microstructure

AP10 SALMAN Serdar; AKALIN Mehmet; ERSOY Sezgin; KÜPELİ Gültekin; OKUŞÇUK Emre & PAZARLIOĞLU S. Serdar

Mechanical Properties of Bi-axial Glass Fiber and Walnut Shell Reinforced Polyester Composites

AP11 UJHELYIOVÁ Anna; HORBANOVÁ Ľuba; MICHLÍK Peter & RYBA Jozef Modified Polypropylene Fibres Applicable in Technical Composites

AP12 VARAN Nilufer Yildiz & GURSOY Nevin Cigdem Textiles for Burn Treatments: An Overview

AP13 VLATKOVIĆ Srđan & VUJASINOVIĆ EditaTextile Scaffolds in Tissue Engineering

AP14 VNENČÁKOVÁ Janka; ZIMÁNY Vladimír; HUDÁK Jozef & MICHLÍK Peter The Macromorphological Structure and Properties of Fibrous Materals on the Basis of

Biodegradable PolymersAP15 VUJASINOVIĆ Edita & KOVAČEVIĆ Zorana

Scale’s Morphology - Powerful Tool in Forensic Identification of Wool Fibres

E11 MILITKÝ Jiří & KŘMENÁKOVÁ Dana Prediction of Fabrics Thermal Conductivity

E12 NAMIRANIAN Rostam & HOSSEINI VARKIYANI Seyed Mohammad Investigation of Protective Garment Characteristics Used in the Car Paint Spray Cabins

E13 NOGUEIRA Clarinda; CABEÇO-SILVA Maria Elisabete; SCHACHER Laurence & ADOLPHE Dominique C.

Sensory Analysis Applied to Textile Products

10

FP1 BANIONIENĖ Jūratė; MACKEVIČIENĖ Eglė & KLEVAITYTĖ RamunėThe Decoration Elements of Lithuanian National Costume in Modern Clothing

FP2 BIN Chen Discussing the Evolution of the Masculine Style of Women’s Wear and Manifestation of

Fashion Design FP3 CURTEZA Antonela; PETCU Ioana; TEODORESCU Mirela; KALAOĞLU Fatma & MACOVEI Laura

Criteria in Apparel Design for People with DisabilitiesFP4 CURTEZA Antonela; CALIN Monica Alina; TEODORESCU Mirela & PETCU Ioana

Pattern Construction System for the Future Perspective of Nanotechnology in TextilesFP5 DAUKANTIENĖ Virginija; DOBILAITĖ Vaida; DOMSKIENĖ Jurgita; JUCIENĖ Milda &

MACKEVIČIENĖ EglėThe Analysis of Sizing Systems Exploring the Need of Anthropometric Measurements in

Lithuanian RepublicFP6 GUDRO Ilze; STRAZDS Guntis & ULME Andra

The Exploration of Unutilized Raw Hide Resources and Research of Hide Manufacture Role in Economy of Latvia

FP7 KUNŠTEK Ana; KAKŠA Mladen; PERVAN Mihaela & PROJIĆ Ines Lika Cap

FP8 MODRONJA BREYER Nina; VINKOVIĆ Maja & ŠABARIĆ Irena Caracteristics of Cut and Fabric for Evening Dresses in the 30-ties of the Last Century

FP9 NOVAK Ivan & VUJASINOVIĆ Edita Marketing Management Simulation Model as Sustainable Economic Model of Wool

Repurchase & Care in CroatiaFP10 PENAVA Željko & NOVAK Ivan

Internet Marketing as Business Concept in Textile IndustryFP11 RAMOS KALMAR Elizabeth

Edesign “ Lifestyle” Creative Enterprise Decoration + Fashion + Art FP12 ŠABARIĆ Irena; BRNADA Snježana & KOVAČEVIĆ Stana

Designer Solutions of Weft Distortion in Striped Fabrics

EP1 AKRAP Iva; ŽUPANIĆ Štefica; PARAC-OSTERMAN Đurđica & VUJASINOVIĆ Edita Usage of FT-IR Microscope in Forensic Examination of Blue Cotton Material

EP2 BALTUŠNIKAITĖ Julija & MILAŠIUS Rimvydas Evaluation of Fabric Flammability Using Colour Change

EP3 ERCEGOVIĆ RAŽIĆ Sanja; ČUNKO Ružica; BAUTISTA Lorenzo; MOTA Jordi & CRESPO Laia Ageing Effect on Wettability Properties of Low-Pressure Plasma-Treated

Cellulosic FabricsEP4 GUL Melek; KOC Ilker Murat & GURSOY Nevin Cigdem

A Study on the Investigation of Frictional Properties of Woven Woolen FabricsEP5 HEMIDA Wael; ELGHOLMY Sherwet & ELGEIHEINI Adel

Global Quality of Combed Cotton Yarns within the Last Half CenturyEP6 KLEVAITYTĖ Ramunė; SACEVIČIENĖ Virginija & MASTEIKAITĖ Vitalija

Shear’s Evaluation of Various Textile FabricsEP7 MALČIAUSKIENĖ Edita & MILAŠIUS Rimvydas

Influence of Weft Insertion Type on the Fabrics Mechanical Properties

17:00 – 18:00 Poster presentationSection F: Design and Marketing of Textile and Clothing

Section E: Analysis, Testing and Quality Control

11

EP8 MILAŠIENE Daiva & FATARAITĖ Eglė Cyclic Loading Frequency Influence on the Behaviour of Laminated

Leather for ClothingEP9 MOUČKOVÁ Eva & JIRÁSKOVÁ Petra

Woven Fabric Surface Unevenness - New Possibilities of its EvaluationEP10 NAUMANN Romy; WENZEL Dirk & FRANITZA Petra

Testing of Personal Protective Equipment (PPE) Against the Thermal Hazard of an Electrical Arc

EP11 NOVAK Ondrej & PETRU Michal Analysis and Testing of Mechanical Properties of Textile Materials for

Medical Applications EP12 SACEVIČIENĖ Virginija; KLEVAITYTĖ Ramunė; MASTEIKAITĖ Vitalija & AUDZEVIČIŪTĖ Inga

Influence of Textile Structure on Their Tensile DeformationEP13 SAFAROVA Veronika & ZOBEL Sabrina

Effect of Various Parameters on Temperature Behavior of Nonwovens During Applying Electric Current

EP14 ŠOMOĐI Željko; KOVAČEVIĆ Stana & DIMITROVSKI Krste Fabric Distortion after Weaving - An Approximate Theoretical Model

EP15 TOMLJENOVIĆ Antoneta; SLUGA Franci; BUKOŠEK Vilibald & ROLICH Tomislav Solar Protective Properties of Nano- TiO2-Coated Shading Fabrics

EP16 TOMLJENOVIĆ Antoneta; ŠIKIĆ Marina & GLOGAR Martinia Ira Functionality Evaluation of Children Summer Knitwear

EP17 TRUMSINA Eva; KUKLE Silvia & ZOMMERE Gunta Consequence of Indirect Testing Methods Analysis of Nano Metal Covered Textile

EP18 VUJASINOVIĆ Edita; VLATKOVIĆ Srđan & DRAGČEVIĆ Zvonko Computer Aided Tensile Strength Analysis of Sailcloth

EP19 YÜKSEK Metin; AKALIN Mehmet; ÖZEN S. Mustafa; BEYİT Ali & ERSOY Sezgin An Investigation of Sound Absorption Properties of the Plain and Spacer

Weft Knitted Fabrics

12

Tuesday, October 5th 2010

09:00 – 10:30 Section A: Textile Fibres and Advanced Materials (Conference Hall 1)Chair person: ElSayed Ahmed ELNASHAR

A14 NAIK Arún; MONTERO Lucila Araceli; RIVA Ascensión; PRIETO Remedios; RIBA Marta; VIDAL Esther & CAYUELA Diana

Improvement of Mechanical Properties and Dimensional Stability of Textured Polylactide Fibres with a Pre-Fixation Thermal Treatment

A15 RACU Cristina; GRIGORIU Aurelia; GRIGORIU Ana-Maria; DIACONESCU Rodica & HRISTIAN Liliana

New Hemp Type Yarns for Medical TextilesA16 TURALIJA Marina; GAAN Sabyasachi; MAUCLAIRE SCHOENHOLZER Laurie;

GUIMOND Sebastien; KOERNE R. Enrico; HANSELMANN Barbara; HEUBERGER Manfred & BISCHOF-VUKUSIC Sandra

Antimicrobial PolylactideA17 WEGO Andreas; BAHNERS Thomas; SCHOLLMEYER Eckhard; GULDI M. Dirk; SGOBBA Vito;

JUX Norbert; PEIL Stefan & MOLDENHAUER GeorgPhotovoltaic Fibers and Textiles due to Functionalisation with Water-soluble Porphyrines

and Carbon Nano TubesA18 YALCIN Ipek; GOK SADIKOGLU Telem; BERKALP Omer Berk & BAKKAL Mustafa

Design and Performance Analysis of Waste Nonwove Reinforced Composites

09:00 – 10:30 Section C: Textile Finishing, Dyeing and Care (Conference Hall 2)Chair person: Shirin NOURBAKHSH

C1 ALVES Madalena & SOARES Graça β-Cyclodextrins - an Eco Friendly Contribution to Textile Finishing

C2 BUSCHMANN Hans-Jürgen; BENKEN Rainer & SCHOLLMEYER Eckhard Surface Modification of Textile Materials by Self Assembly of Molecular Layers

C3 DEANKO Peter; ČIŽMÁROVÁ Dana & ŠESTÁK Jozef Surface Dyeing of Polypropylene Fibres

C4 ĐURAŠEVIĆ Vedran; PARAC-OSTERMAN Đurđica & SUTLOVIĆ Ana Spectrophotometric Analysis of Spirooxazine and Spiropyrane Dyes

09:00 – 10:30 Section E: Analysis, Testing and Quality Control (Conference Hall 3)Chair person: Rimvydas MILAŠIUS

E14 REBELO Olga; CATARINO André; ABREU Maria José & LIMA Mário Friction and Compression Evaluation of Socks for Diabetic Patients

E15 SHARAFAT Hamid Reza & YAZDANSHENAS Mohammad Esmail Optimization of Mercerizing Conditions Using Taguchi’s Method

E16 SITVJENKINS Igors; VILUMSONE Ausma; BALTINA Ilze & ZARINA UnaFabric Selection for the Field Uniforms

E17 ŠOMOĐI Željko An Improved Nonlinear Deformational Model of Woven Fabric in Biaxial Tension

E18 ZIĘBA Janusz & FRYDRYSIAK Michał Textronic Sensors of Respiratory Rhythm Frequency

13

11:00 – 13:00 Section D: Clothing Technologies and Engineering (Conference Hall 1)Chair person: Laszlo Mihaly VAS

D1 ELMRYCH-BOCHEŃSKA JoannaAnalysis of the Sewing Thread Characteristics Changes and Their Relationship with

the Seam Tensile StrengthD2 PAPANTONIOU Agis; VASSILIADIS Savvas; AKTIPIS-TRIKOUPIS Charalambos; SIGALAS

Alexandros & POULIZOS Miltos Towards Semantic Reasoning in Wearable System Networks: A Case of Heart

Beat Behavior RecognitionD3 PETRAK Slavenka; GLAVICA Božica; GERŠAK Jelka; MAHNIĆ Maja; ROGALE Dubravko &

UJEVIĆ Darko Garments Prototype Development Using an Innovative Computer Technology

D4 TAMA Derya; ŞEN Arzu; ÖNDOĞAN Ziynet; PAMUK Oktay & ERDOĞAN M. Çetin A Study of Associating the Body Types With Garment Pattern

11:00 – 13:00 Section C: Textile Finishing, Dyeing and Care (Conference Hall 2)Chair person: Sathya RAMASWAMY INBARAJU

C5 KATOVIĆ Andrea; FLINČEC-GRGAC Sandra; KATOVIĆ Drago & BISCHOF-VUKUŠIĆ Sandra

Zeolites in Esterification of Citric Acid and Cellulose C6 LE GOFF Amélie; PEREIRA Anabela; SOARES Graça & MIRANDA Teresa

Studies on Cotton Modification with Dodecenyl Succinic Anhydride (DDSA)C7 MOCIOIU Ana-Maria; DUMITRESCU Iuliana; RADULESCU Clara; DUMITRESCU Corina &

ZAMPETAKIS AristotelisThe Development of New Generations of Textile Products Based Bamboo/Polyamide

Incorporating Silver ParticlesC8 MOTA Jordi; BAUTISTA Lorenzo; CRESPO Laia; PAUL Roshan; ESTEVE Helena; BROUTA

Marolda; JIMÉNEZ Javier; AMANTIA David; FACCINI Mirko; FERNÁNDEZ Minerva; DELGADO Esther; AUBOUY Laurent & DE LA VARGA Meritxell

Sol-Gel and Plasma Technologies Applied to TextilesC9 NOURBAKHSH Shirin & FOTOUHI Mohsen

Ageing Effects of Corona Treated Indigo Dyed Denim and its Improvement

11:00 – 13:00 Section G: Environment Protection, Ecology and Energy Management (Conference Hall 3)

Chair person: Štefica CERJAN STEFANOVIĆ G1 GOK SADIKOGLU Telem; BERKALP Omer Berk & YALCIN Ipek

The Usage of Mineral Added Nonwovens in Agricultural Irrigation SystemsG2 MIHELIĆ-BOGDANIĆ Alka; BUDIN Rajka & KOŠČAK-KOLIN Sonja

Process Energy Conservation Using Secondary SourcesG3 SOLJAČIĆ Ivo & PUŠIĆ Tanja

Environment Protection Aspects in the Development and Application of Dry-Cleaning Solvents

G4 VOJNOVIĆ Branka; MARGETA Karmen & CERJAN-STEFANOVIĆ Štefica Natural Zeolites as Effective Adsorbents for Silver Ions Removal

14

15:00 – 16:30 Section D: Clothing Technologies and Engineering (Conference Hall 1)Chair person: Slavenka PETRAK

D5 UJEVIĆ Darko; SZIROVICZA Lajos; HALÁSZ Marianna; TAMÁS Péter; PETRAK Slavenka; DOLEŽAL Ksenija; DOMJANIĆ Žaklina; BRLOBAŠIĆ ŠAJATOVIĆ Blazenka; KISFALUDY Marta; MIHÁLY VAS László; KOLESZÁR András & NAGY SZABÓ Orsolya

Comparison of Conventional and Computerised Human Body Measurement MethodsD6 WANG Zhaohui; NG Roger; NEWTON Edward & ZHANG Weiyuan

Investigation of Ease Distribution at Armhole for Jacket Pattern AlterationD7 ZAVEC PAVLINIC Daniela & MEKJAVIC B. Igor

Extreme Environmental Conditions Require Optimal Military Clothing EnsemblesD8 ZIMNIEWSKA Malgorzata; LAURENTOWSKA Maria; BOGACZ Edyta & ZIMNIEWSKA Oliwia

Evaluation of Garment Effect on Physical Endurance of Sportsmen

15:00 – 16:30 Section C: Textile Finishing, Dyeing and Care (Conference Hall 2)Chair person: Sandra BISCHOF VUKUŠIĆ

C10 SAHIN Umut Kivanc; GURSOY Nevin Cigdem & HAUSER Peter Using Metal Salts as Cationic Crosslinking Agents in Treatment of Cotton Fabric

C11 SHIRGHOLAMI Mohammad Ali; YAZDANSHENAS Mohammad Esmail; KALAMI Masod; MAJIDI Mohammad Mahdi & SHIRGHOLAMI Hossein

Optimizing Dyeing Condition of Wool with Madder and Nano Silver and Investigation of its Antibacterial Property

C12 TOMŠIČ Brigita; ČERNE Lidija; SIMONČIČ Barbara; OREL Boris; JERMAN Ivan & KOVAČ Janez Functional Properties of Two Component Antimicrobial and Oil Repellent Coating on

Cotton FabricC13 YANG Q. Charles & CHEN Dongzhong

Crosslinking Cotton Cellulose Using the Combination of Maleic Acid and Sodium Hypophosphite

C14 YANG Q. Charles & WEIL D. Edward Flame Retardant Finishing and Flame Retardant Textiles

15:00 – 16:30 Section B: Manufacture of Yarns, Fabrics and Nonwovens (Conference Hall 3)Chair person: Huseyin KADOGLU

B1 CİMİLLİ DURU Sena & CANDAN CevzaDynamic Analysis of Needle Used at Circular Knitting Machines

B2 KŘEMENÁKOVÁ Dana & PIVOŇKOVÁ Dagmar Prediction of Yarn Packing Density and Strength

B3 NIKOLIĆ Momir; SKENDERI Zenun & ŠAJN GORJANC Dunja Two-ply Cotton Yarn Production on Ring Spinning Machine and its Quality

B4 USTA Ismail; SANCAK Erhan; YUKSEK Metin; BEYIT Ali; ATAK Onur & SENYUREK Y. Volkan Effect of Metal Filament Wire Containing Knitting Fabrics on Electromagnetic

Shielding Effectiveness (EMSE)

15

16:30 – 17:30 Poster presentation

Section D: Clothing Technologies and Engineering

DP1 DOLEŽAL Ksenija; UJEVIĆ Darko; HRŽENJAK Renata, BRLOBAŠIĆ ŠAJATOVIĆ Blaženka; PETRAK Slavenka & HALÁSZ Marianna

Anthropometric Evaluation, Standardization and Comparison of Garment SizesDP2 ELMRYCH-BOCHEŃSKA Joanna & LESIAKOWSKA-JABŁOŃSKA Marzanna

The Assumptions for Flexible Sewing Team Organizing in the Mass Customization Reality

DP3 HURSA ŠAJATOVIĆ Anica; DRAGČEVIĆ Zvonko & ROGALE Dubravko The Influence of the Auxiliary Devices on the Structure of Tehnological

Sewing OperationDP4 JUCIENĖ Milda & DOBILAITĖ Vaida

The Effect of Fabric Properties on Seam Pucker IndicatorDP5 LI Xiaojiu & LI Xiaozhi

3D Surface Reconstruction of Body From Point CloudDP6 NIKOLIĆ Gojko; ČALA Ivo & ČUBRIĆ Goran

The Application of Project Management Methods in Clothing ManufactureDP7 RADAVIČIENĖ Svetlana & JUCIENĖ Milda

Investigation of Mechanical Properties of Embroidery ThreadsDP8 SALEHI ESFANDARANI Maryam & SHAHRABI Jamal

Solution for Suit Sizing ProblemsDP9 ŠARAVANJA Bosiljka & DRAGČEVIĆ Zvonko

Introduction of the Modular Way of the Technological Process Using the 20 Keys-System

DP10 UJEVIĆ Darko; KOVAČEVIĆ Stana; SMAILBEGOVIĆ Adnan; PAČAVAR Samir & KONAKOVIĆ Mirsad

Analysis of Making Airbags

Section C: Textile Finishing, Dyeing and Care

CP1 DEKANIĆ Tihana; SOLJAČIĆ Ivo & PUŠIĆ Tanja Light Fastness of Novel Fluorescent Compounds in Detergents

CP2 DURAL EREM Ayşin; ÖZCAN Gülay; SKRIFVARS Mikael & EREM Hasan Hakan The Production of Chitosan and Polypropylene/Chitosan Composite

CP3 FAKIN Darinka & OJSTRŠEK Alenka The Effect of Colour Strength and UV Absorber on UV Protection Properties

of Textile MaterialsCP4 FLINČEC GRGAC Sandra; KATOVIĆ Drago; KATOVIĆ Andrea & BISCHOF

VUKUŠIĆ Sandra Thermal and FT- IR Analysis of Cotton Fabrics Treated with two Different

Flame Retardant AgentsCP5 JEMO Danijela; SOLJAČIĆ Ivo & PUŠIĆ Tanja

Investigation of Detergents for Washing Historic TextilesCP6 KUKLE Silvia; BARLOTI Janis; BLUMS Juris & VIHODCEVA Svetlana

Functionalization of Cotton Textiles with MetalsCP7 OCEPEK Barbara & FORTE TAVČER Petra

Behaviour of Printed Melamine-Formaldehyde Microcapsules Exposed to Different Mechanical Impacts

CP8 PUŠIĆ Tanja; LANT Neil; SOLJAČIĆ Ivo; PATTERSON Steven & VIŠIĆ Ksenija Surface Modifications of Cotton With Carboxymethyl Cellulose in Washing Processes

16

CP9 RADU Cezar; HRITCU Mihaela; AVADANEI Emanuela; GRIGORIU Aurelia; BRANISTEANU Daciana & OPROIU Cornelia

Textile Used in the Cure of Allergic DermatitisCP10 RAMASWAMY INBARAJU Sathya & SUBRAMANIAM Venkataraman

Influence of Enzymatic Treatment on Mechanical Properties of Woven Cotton Khadi Fabrics

CP11 ŠOSTAR-TURK Sonja; FIJAN Sabina; ALTENBAHER Brigita & MLAKAR Vid SMILES: Sustainable Measures for Industrial Laundry Expansion Strategies: Smart

Laundry-2015CP12 TARBUK Anita; GRANCARIĆ Ana Marija & BIŠĆAN Jasenka

Adsorption Properties of Cationized Cotton with EPTACCP13 ZIMNIEWSKA Malgorzata; HEGEMANN Dirk; BOGACZ Edyta; KICINSKA-JAKUBOWSKA Anna

& SIERPOWSKI Grzegorz Nanotechnology Application to Flax Yarn for Antibacterial Socks

CP14 YILMAZ SAHİNBASKAN Burcu; OGUTGEN AÇIKGOZ Zuhal; GUMRUKCU Gulsah & USTUN OZGUR Mahmure

Dyeing Properties of Woollen Fabric with Quercetin Extracted from Punica Granatum L. Rind Using Different Dyeing Method and Mordant Mixtures

Section B: Manufacture of Yarns, Fabrics and Nonwovens

BP1 AKOLO Paul BarrisonInfluence of Processing Parameters on the Quality of Rotor Spun Yarn: Prediction Using

Regression and Anfis BP2 COMANDAR Constanta

Investigation of Knitted Fabric Structure on its Elasticity BP3 DURAN Deniz & KADOGLU Huseyin

Protection Against Electromagnetic Waves with Textiles BP4 KNEZIĆ Željko; PENAVA Željko & ROGALE Dubravko

Weaving Machine Consumption of Electricity Depending on Weaving Speed BP5 MACOVEI Laura; CRETU Viorica & CURTEZA Antonela

Comparative Study of Knitted Fabric Take-down for the Flat Knitting ProcessBP6 SANCAK Erhan; YENİDOĞAN Semiha; SESLİ Yasemin; KOCAK Dilara & PAZARLIOGLU S. Serdar

Mechanical Properties of Multi-axial Glass Fiber/ Mah-waste Kraftpaper Reinforced Polyester Composites

BP7 TREIGIENE Rasa The Influence of Steam Setting on the Structure of Plated Jersey Knits

Section G: Environment Protection, Ecology and Energy Management

GP1 FIJAN Sabina; NERAL Branko; ALTENBAHER Brigita; ARNUŠ Suzana; ŠTANC Darko & ŠOSTAR-TURK Sonja

Accept: Advanced CO2 Cleaning as an Ecological Process TechnologyGP2 MICHLÍK Peter; KRIVOŠ Štefan; UJHELYIOVÁ Anna; HAVRAN Boris & VNENČÁKOVÁ Jana

Progressive Modified Polypropylene FibresGP3 OJSTRŠEK Alenka & FAKIN Darinka

Decolorization Of Simulated Textile Wastewaters In Fixed-Bed Treatment SystemGP4 OKRUSZEK Andrzej; DZIWORSKA Gabriela & SKONECZNA Magdalena

Utilization of Biomas for Preparation of Environmentally Friendly PolymerGP5 PETRINIĆ Irena; KORENAK Jasmina; SIMONIČ Marjana & ČURLIN Mirjana

Textile Wastewater Treatment Using a Membrane Bioreactor

17

For the papers to be orally presented, presentation is limited to 15 min and 5 min for discussion after presentation.

An IBM PC and LCD projector will be available for the participants wishing to accompany oral presentation of their papers with a Microsoft PowerPoint 97/2000/XP/2003 presentation. These participants are requested to submit a CD-ROM for each paper at the registration. The following data should be written on the CD-ROM cover: Section, Name and Surname of the presenter, Paper title.

The CD-ROMs will be returned to the authors.

For the papers to be poster presented, the posters should be prepared in 1189 mm high and 841 mm wide (A0 format). Letters should be of such a size that can be read from 1 m distance.The title is an integral part of the poster and should include:

Paper titleName of author(s)InstitutionAddress of author(s)

The posters should be on boards as follows: • for the presentation on October 3th in sections A, F and E: 08:30 – 09:00 • for the presentation on October 5th in sections D, C, G & B: 08:30 – 09:00

After poster presentation in sections the authors are required to remove their poster materials.

Conference fee for authors and participants (in EUR):Regular participants 450Young scientists 300Accompanying person 250Participants that have not paid their conference fee via bank transfer should settle their dues at the conference registration desk in CAAS - cash payment (in EUR or HRK).

Registration fee for the individual authors (both regular participants and young scientists) include access to all the sessions, conference proceedings and materials, welcome cocktail, conference lunches (2), refreshments at conference coffee breaks, official ITC&DC excursion, a ticket for the evening entertainment and a ticket for the conference dinner.

Registration fees for the accompanying persons include admission to all sections, welcome cocktail, conference lunches (2), refreshments at conference coffee breaks, official ITC&DC excursion, a ticket for the evening entertainment and a ticket for the conference dinner.

The participants are cordially invited to attend Concert in St. Dominic`s Church with beginning at 20:00 on October 4th, 2010.

Conference dinner with music will be organised on October 5th at 20:30 in the Restaurant MIMOZA and is included in the registration fee.

ITC&DC excursion for the authors and accompanying persons will be organised on October 6th, 2010 with departure from Port Gruž at 10:00 to the late evening hours.

18

The Dubrovnik Airport (Ćilipi) is 20 km away from the town (and the Centre for Advanced Academic Studies CAAS). There is a taxi service at the airport (approx. 30 EUR), as well as a regular bus line (35 HRK per person – approx. 5 EUR).

Hotels: Lero is 15 minutes walk from CAAS; Adriatic, Vis and Komodor are 3 km away from CAAS (local bus line No. 4 or 45 minutes walk from CAAS).

Transfer from hotels to Old city (area Pile) will be organized free of charge at October 4th and 5th 2010. Bus departs at 8.30 a.m. in front of hotel Adriatic for participants in hotel Vis, Komodor and Adriatic.

All the other relevant information on your accommodation and stay in Dubrovnik you can find in your Dubrovnik Guide, which is a part of the conference material and will be distributed to each participant.

19

CONCERT (St. Dominic`s Church)

(Restaurant Mimoza)

(Port Gruž))

Monday, October 3rd 2010

Monday, October 5th 2010

Monday, October 4th 2010

20

Ministry of Science, Education and Sport, Republic of Croatia, Zagreb, CroatiaCentre for Advanced Academic Studies (CAAS), Dubrovnik, Croatia

Croatian Society of Chemical Engineers, Zagreb, CroatiaCroatian Chamber of Economy, Zagreb, Croatia

CARNet, Zagreb, Croatia

Croata® Potomac d.o.o., Zagreb, CroatiaCroatia Airlines, Croatia

ČATEKS d.d., Čakovec, CroatiaDodo, Zagreb, Croatia

Franck d.d., Zagreb, CroatiaGrgec, Zagreb, CroatiaGRIP, Zagreb, Croatia

Hrvatska turistička zajednica, CroatiaIKOM d.o.o., Zagreb, Croatia

Jacquard, Zagreb, CroatiaKONFEKS d.o.o., Zagreb, Croatia

KOTKA d.o.o., Krapina, CroatiaModea d.d., Garešnica, Croatia

MIŠ, d.o.o., Zagreb, CroatiaPodrum Videc, Lopatinec, Croatia

Pronit, Zagreb, CroatiaTARDI d.o.o., Zagreb, Croatia

Tarštok, Zagreb, CroatiaTekstilna štamparija Zagreb, Croatia

TiMEP d.o.o., Zagreb, CroatiaTOZ –PENKALA d.d., Zagreb, Croatia

Turistička zajednica grada Dubrovnika, CroatiaYKK d.o.o., Zagreb, Croatia