We Are:

• MacLog Solutions represents foreign companies

specializing in the Oil and Gas Drilling Equipment and

Services, facilitating the dialogue between our foreign

partners and the South American market, always seeking to

offer the best Solutions to our Customers.

• MacLog Solutions covers the South American market,

supplying Drilling Equipment and Services for the Oil and

Gas Industry (Land & Offshore – E&P).

We Represent: • Lee C. Moore (LCM) is dedicated to providing high-quality Land and

Offshore Oil & Gas drilling equipment to customers all over the

world, for over 100 years

• Lee C. Moore brand is a landmark in the industry, with over 4000

Cantilever Masts and over 500 Offshore Derricks built since 1907

• LCM also offers worldwide Field Services for all Makes and Models

of drilling structures. LCM’s Technicians specialize in API RP 4g

Category III & IV Inspections, Recertification, Emergency Repairs,

Upgrades and Equipment Installation

Lee C. Moore’s Products & Services

• Derricks, Masts & Substructures • Structural Design, Analysis & 3D Modeling • Rig Moving Systems & Transportation Dollies • BOP Handling Systems • Structural Engineering & Modification • Field Services & Training • API Inspection and Recertification

The name behind more than 100 years of oilfield innovation and experience is dedicated to providing high-quality design and fabrication of oil and gas drilling equipment to customers worldwide:

Lee C. Moore’s

HMR II

Lee C. Moore’s

SLOT BOX DESIGN

142’ x 23’ Hydraulic Raised Cantilever HMR 600K

Mast with static hook capacity of 600,000 lbs. per

API Standard 4F 3rd edition, PSL-1 with ten (10)

lines strung to the traveling block with Box on Box

Substructure designed to facilitate fast rig moves

with minimal disassembly and rig-up. Mast and

substructure designed for assembly with cranes.

Mast and substructure move in seven (7) primary

loads with transport design limits as follows:

Overall Width: 12’-0”

Overall Height: 11’-0”

Maximum Lift: 75,000 lbs.

Lee C. Moore’s

“xS Mast” Features:

Benefits:

• Innovative hydraulic jacking system for scoping mast

• Minimum crew for raising / lowering – approximately 5

• Maximized drill floor area

• Integrated skidding systems for multi-well capability

• Industry proven component design

• Variety of packaged options, capacities & accessories

• Wide (30 ft) base mast for enhanced safe working area around rotary

table

• Unobstructed driller visibility to crown

• Multi-functional system

• Integrated scoping system

• Low rig up time

• Light weight

• Small footprint

• Range of rig capacity - 750k – 1,500k

Lee C. Moore’s

BOP Handling System

Lee C. Moore’s

Rig Rover System™

Fast, Safe, Versatility & Easy

Multidirectional

Interchangeability

Pinned Installation

Moves with full setback

Designed for Pad Drilling

More wells drilled

Eliminates rig down time

Decreased truck traffic

Controlled operation

We Represent: • Swanson Industries is a worldwide supplier of hydraulic, machining

and plating services with expertise in designing and manufacturing

new products; remanufacturing and repairing components;

engineering; and distribution of certified products.

• Swanson Industries is certified to design and manufacture large-

bore long-stroke hydraulic cylinders to comply with engineering

standards set by the American Bureau of Shipping (ABS) and DNV.

• Long-Stroke Large-Bore Cylinders

• Motion-Compensator Cylinders

• Production and Drilling Riser Cylinders

• Double-Ended Cylinders

• Double-Acting Cylinders

• Single-Acting Plunger Cylinders

• CMC Cylinders

• Wireline Tensioner Cylinders

Swanson’s Products

We Represent: • Omron Oilfield & Marine was the first company to equip and deploy AC drives and

controls on AC land rigs in large production quantities. And we were the first company to provide Variable Frequency Drives on top drives. While we’re proud of these technological innovations for more than 40 years, we remain focused on continuing to innovate the way the world drills.

• Integration of the latest AC drive & PLC technology provides the backbone for Omron Land Drilling Systems.

• Omron’s control houses are the center of rig intelligence by regulating and controlling all electrically actuated drilling equipment.

• The rig control software is embedded within the PLC structure, to synchronize all drilling functions as well as performing top level control automated functions (auto-drilling, mud pump synchronization and pump pulsation pressure limiting, etc.).

• Automated Drilling Systems • Driller’s Cabins • Power Houses • Third-party Integration • Services • Customer Training

Omron’s Products & Services

We Represent:

• Eneroil Offshore Drilling is one of the world’s leading cementing products manufacturer, supplying its cementing products.

• Eneroil manufactures wide range of cementing equipment conforming to API 10D specifications under license from American Petroleum Institute.

• Eneroil has Distributors in more than 25 countries, supplying its cementing products to Oil & Gas Majors, such as Schlumberger, Halliburton, Baker Hughes, Saudi Aramco, Petronas, Total, Occidental and Murphy.

• Main Products: Casing Centralizers, Float Equipment, Cementing Plugs

We Represent: • Logan Oil Tools has decades of experience manufacturing a

complete line of Fishing Tools, Power Swivels and related products, delivered to many of the largest fishing and rental tool companies around the world

Logan Manufactures

• Overshots

• Spears

• Taper Taps

• Die Collars

• Junk Baskets

• Junk Subs

• Fishing Magnets

• Ditch Magnets

• Safety Joints

• Hydraulic Fishing Jars

• Jar Energizers and Intensifiers

• Fishing Bumper Subs

• Hydraulic and Mechanical

External Cutters

• Hydraulic and Mechanical

Internal Cutters

• Casing Rollers

• Casing Scrapers

• A full line of Casing Patches, and

• Power Swivels

Logan’s

Products

Retrieving Tools

Overshots Spears Junk Baskets

Stroking Tools

Jars and Energizers Coiled Tubing Tools

Remedial Tools

Casing Patches Cutters

Power Swivels

Logan’s Products

• The Logan Sup-R-Jar is a double-

acting hydraulic drilling jar.

• Logan Sup-R-Jar hits harder, last

longer, can be run in both tension and

compression, and can be run in all

types of wells.

• The Logan Sup-R-Jar is suitable for:

• Straight Hole

• Directional Hole

• Fishing

• Workover

The Xciter is a user-friendly tool that is added to

the bottom hole assembly (BHA) to enhance slide

and rotary drilling performance under the most

challenging of wellbore conditions.

A variable frequency excites the drill string to

break static friction in the build and horizontal

sections of the well. Amplitude and frequency

control are achieved by changing flow

configuration within the tool.

Positive Effects of the Xciter:

• Increases ROP while sliding

• Enhances ability to achieve desired build rates

• Better control of WOB results in extended bit

life

• Enhances tool face control results in reduction

of orienting time

• Increases rig efficiency (fewer trips to swap

pipe or change worn bits

• Facilitates success in drilling longer horizontal

sections

Logan Sup-R-Jar

Logan Xciter

Logan’s Products

Logan’s MultiStim Fracture Isolation System

Logan’s MultiStim Fracture Isolation System is especially designed for multi-stage fracs. This

innovative, proprietary multi-stage completion technology features valves with fully retrievable

seats post-fracturing via threaded tubing, without milling or drilling!

Applications

• Extended reach horizontal wells

• Open-hole and cased-hole horizontal and vertical wells

• Sandstone, carbonate, shale, coal, and naturally fractured formations

Features

• Ball seats can be removed in a single run without milling or drilling

• Sleeves can be selectively opened and closed for post fracture control

• Stimulation of the entire wellbore can be customized throughout the life of the well

• Cementing, or plugging and perforating is not required

• Fully covers extended-reach horizontal wells

• Fractures can be controlled from toe to heel for selective fracturing and producing

• One-trip installation for faster completion times

Logan’s Products

Logan Kline Tools has been a leading manufacturer of

downhole tools for the Well Servicing Industry for more

than 30 years.

Logan Kline Tools manufacture a wide variety of

specialized oilfield equipment to meet your well

servicing needs:

•K-Frac Fracturing Liner Systems

•Packers

•Tubing Anchors

•Scab Liner Assemblies

•Bridge Plugs

•Tubing Swivels

•Retrieving Tools

•Unloading Valves

•Collar Locators

Logan Kline Tools

We Represent: • Triflo International has been providing Solids Control Equipment

since 1979, with a dedicated commitment to meeting the fluid processing needs of Contractors and Operators worldwide.

• Through design expertise and manufacturing know-how, Triflo have developed a line of high-quality products, such as:

– Oilfield Mud Systems (Land & Offshore)

– Trenchless Mud Systems

– Solids Control Equipment

– Custom Equipment Manufacturing

We Represent: • With over 50 years experience supplying Naval Defence and

Industrial Markets world-wide, Hale Hamilton is synonymous with “Excellence in Pressure and Flow Control”.

• Hale Hamilton specializes in High Pressure Control Valves and Bespoke Control Systems for the control and switching of air, oxygen, inert gases, corrosive gases, liquids and gaseous fuels and hydraulic fluids.

• Product range includes Forward Pressure Regulators; Back Pressure Maintaining Valves; Relief Valves; Manual and Actuated Stop Valves; Solenoid Valves; Filters; Non Return Valves; High and Ultra High Purity Valves; Customer application specific Control Systems.

We Represent:

• To help our Customers resolving their problems with the supply of Critical

Equipment and Products, MacLog Solutions has been also developing a

close relationship with key Manufactures and Vendors all over the world, able

to provide quick solutions to those problems.

• This has helped MacLog Solutions establishing a close relationship with our

Customers, as well as with our Trade Partners.

If you need more information about our Products and Services, just contact us!

Thank You!

(+55 21) 3437-1970

marcelo.correa@maclogsolutions.com

www.maclogsolutions.com