of 14/14
Specification subject to change without notice www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0 Page 1 / 14 LTP Series - 240W High Bay Driver Product Features Universal input voltage: 90~305Vac; Constant power design, output current adjustable; Setting current with a built-in variable resistor; 2-in-1 dimming mode 0-10Vdc, PWM dimming; Surge protection: 4KV line-line, 6KV line-earth; Overall protection: Short circuit / Over temperature; Degrees of protection: IP65; Ambient temperature: -40℃~60; 5 years warranty. Application Suitable for industrial lighting. DESCRIPTION LTP-240 series is especially designed for industrial lighting applications.This series takes constant power design, 0-10V and PWM dimming. The output adapts wide load range and the parameter can be adjusted through internal potentiometer. The circular integrated structure enables perfect match to industrial lighting fixtures and performs excellent heat dissipation to meet the industrial lighting demand. MODELS Model Number [1] Max Output Power WOutput Voltage Range (Vdc) Output Current Adjustable Range (A) Full Power Current Adjustable Range (A) [2] Default Output Setting Typical Efficiency [3] Power Factor 115Vac 230Vac LTP-240Y036 240 1436 4.007.05 6.677.05 1436V/6.67A 92% 0.99 0.96 LTP-240Y062 240 2162 3.225.71 3.875.71 21~54V/4.44A 92% 0.99 0.96 Notes: [1]. Y can be M or V, means dimmable or non-dimmable. Take LTP-240Y036 for example, LTP-240M036, with 0-10V, PWM dimming function, output current adjustable; LTP-240V036, output current adjustable; LTP-160D036, with DALI dimming function, output current adjustable; [2]. Output current adjustable range with constant power at max output power; [3] All specifications are measured at 25ambient temperature, if no specific note.

LTP Series - 240W High Bay Driver...2019/11/06  · LTP Series - 240W High Bay Driver OPERATING AREA I-V LTP-240Y036 LTP-240Y062 INPUT SPECIFICATIONS Output Current Vs Output Voltage

  • View
    2

  • Download
    0

Embed Size (px)

Text of LTP Series - 240W High Bay Driver...2019/11/06  · LTP Series - 240W High Bay Driver OPERATING AREA...

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 1 / 14

    LTP Series - 240W High Bay Driver

    Product Features Universal input voltage: 90~305Vac;

    Constant power design, output current adjustable;

    Setting current with a built-in variable resistor;

    2-in-1 dimming mode 0-10Vdc, PWM dimming;

    Surge protection: 4KV line-line, 6KV line-earth;

    Overall protection: Short circuit / Over temperature;

    Degrees of protection: IP65;

    Ambient temperature: -40℃~60℃;

    5 years warranty.

    Application

    Suitable for industrial lighting.

    DESCRIPTION

    LTP-240 series is especially designed for industrial lighting applications.This series takes constant power design, 0-10V and PWM dimming. The output adapts wide load range and the parameter can be adjusted through internal potentiometer. The circular integrated structure enables perfect match to industrial lighting fixtures and performs excellent heat dissipation to meet the industrial lighting demand.

    MODELS

    Model Number [1]

    Max Output Power

    (W)

    Output Voltage Range (Vdc)

    Output Current

    Adjustable Range (A)

    Full Power Current

    Adjustable Range (A) [2]

    Default Output Setting

    Typical Efficiency

    [3]

    Power Factor

    115Vac 230Vac

    LTP-240Y036 240 14~36 4.00~7.05 6.67~7.05 14~36V/6.67A 92% 0.99 0.96

    LTP-240Y062 240 21~62 3.22~5.71 3.87~5.71 21~54V/4.44A 92% 0.99 0.96

    Notes: [1]. Y can be M or V, means dimmable or non-dimmable. Take LTP-240Y036 for example, LTP-240M036, with 0-10V, PWM

    dimming function, output current adjustable; LTP-240V036, output current adjustable; LTP-160D036, with DALI dimming

    function, output current adjustable;

    [2]. Output current adjustable range with constant power at max output power;

    [3] All specifications are measured at 25℃ ambient temperature, if no specific note.

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 2 / 14

    LTP Series - 240W High Bay Driver OPERATING AREA I-V

    LTP-240Y036 LTP-240Y062

    INPUT SPECIFICATIONS

    Output Current Vs Output Voltage Curve

    7.05 , 34.0

    6.67 , 36.0

    0.71 , 17.0 7.05 , 17.0

    0.71 , 36.0

    15.0

    20.0

    25.0

    30.0

    35.0

    40.0

    0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00

    Output Current (A)

    Output Voltage (V)

    4.00

    Output Current Vs Output Voltage Curve

    5.71 , 42.0

    3.87 , 62.0

    5.71 , 21.0

    0.39 , 31.0

    0.57 , 21.0

    0.39 , 62.0

    10.0

    20.0

    30.0

    40.0

    50.0

    60.0

    70.0

    0.00 1.00 2.00 3.00 4.00 5.00 6.00

    Output Current (A)

    Output Voltage (V)

    3.22

    Parameter Min. Typ. Max. Notes

    Input Voltage 90Vac 100-277Vac 305Vac

    Input Frequency 47HZ 50/60 63Hz

    Leakage Current - - 0.75mA 277Vac/50Hz

    Input AC Current - - 3.3Amax 100-277Vac &full load

    Inrush Current(A) - - 75A 230Vac & full load

    Power Factor 0.95 0.96 - 230Vac & full load

    THD

    20% 115-230Vac, 75%-100% load,

    applicable to CE version

    - - 20% 115-277Vac, 75%-100% load,

    applicable to UL version

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 3 / 14

    LTP Series - 240W High Bay Driver OUTPUT SPECIFICATIONS

    Parameter Min. Typ. Max. Notes

    Output Current Tolerance -5%Iset - 5%Iset Full load

    Output Current Setting Range (Iset) LTP-240Y036 LTP-240Y062

    4.00A 3.22A

    -

    7.05A 5.71A

    Output Current Setting Range with Constant Power LTP-240Y036 LTP-240Y062 LTP-240Y342

    6.67A 3.87A

    -

    7.05A 5.71A

    Total Output Current Ripple (pk-pk)

    - - 10% 230Vac & full Load,load is LED, ripple is

    different with difference LED load.

    Startup Overshoot Current - - 10% 115~277Vac & 100% Load,load is LED

    No Load Output Voltage LTP-240Y036 LTP-240Y062

    - -

    50V 80V

    Line Regulation - - 1% 25℃±10℃ ambient temperature, input voltage changes from 115Vac to 305Vac.

    Load Regulation - - 3% 25℃±10℃ambient temperature, 230Vac input, load changes from 50% to 100%.

    Turn-on Delay Time

    - - 3S 115Vac,100% load

    - - 0.5S 230Vac,100% load

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 4 / 14

    LTP Series - 240W High Bay Driver GENERAL SPECIFICATIONS

    Parameter Min. Typ. Max. Notes

    Efficiency @115Vac

    88% 88%

    88% 88%

    90% 90%

    90% 90%

    Measured at full load and 25℃ambient Temperature

    LTP-240Y036

    Io=6.67A

    Io=7.05A

    LTP-240Y062

    Io=3.87A

    Io=5.71A

    Efficiency @230Vac

    90% 90%

    90% 90%

    92% 92%

    92% 92%

    Measured at full load and 25℃ambient Temperature

    LTP-240Y036

    Io=6.67A

    Io=7.05A

    LTP-240Y062

    Io=3.87A

    Io=5.71A

    Efficiency @277Vac

    90% 90%

    90% 90%

    92% 92%

    92% 92%

    Measured at full load and 25℃ambient temperature

    LTP-240Y036

    Io=6.67A

    Io=7.05A

    LTP-240Y062

    Io=3.87A

    Io=5.71A

    Dielectric

    Strength

    Input-Output - 3750Vac -

    10mA/60S Input-PE - 1600Vac -

    Output- PE - 1600Vac -

    Grounding Resistance - - 0.1Ω 25A/60S

    Insulation Resistance 50MΩ - - Input-Output, Input-PE, Output-PE,

    500Vdc/60S/25℃/70%RH

    MTBF - 200000hours - 230Vac,80% load (MIL-HDBK-217F)

    Lifetime - 50000hours - 230Vac&100% load,70℃case temperature,

    refer to lifetime VS Tc curve for details

    Operating Case Temperature for Safety Tc_s

    -40℃ - +85℃

    Operating Case Temperature for Warranty Tc_w

    -40℃ - +70℃

    Storage Temperature -40℃ - +85℃ Humidity: 5% to 100% RH

    Dimensions (L×W×H)mm ¢191*H74.8mm

    Net Weight 2280±50g/PCS

    Package L500*W410*H240mm; 8pcs/Ctn.

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 5 / 14

    LTP Series - 240W High Bay Driver DIMMING

    Parameter Min. Typ. Max. Notes

    0~10VAbsolute Maximum Voltage on the Vdim (+) Pin

    0V - 10V

    0~10VSource Current on Vdim (+)Pin

    - - 2mA

    Dimming Output Range

    LTP-240Y036 LTP-240Y062

    10%Imax - 100%Imax

    LTP-240Y036 LTP-240Y062

    0.70 0.57

    -

    7.05A 5.71A

    DA, DA High Level 9.5 V 16 V 22.5 V applicable to LTP-240D036 and LTP-240D062,

    dimming off DA, DA Low Level -6.5 V 0 V 6.5 V

    Recommended Dimming Range for 0-10 V

    0V - 10V

    Default 0-10V/10V PWM Dimming

    PWM_in High Level 9.7V - 10V

    PWM_in Low Level 0V - 0.3V

    PWM_in Frequency Range 250Hz

    1000Hz

    PWM_in Duty Cycle 1% - 99%

    SAFTY STANDARDS

    Safety Category Country / Territory Standards

    CCC China GB19510.1, GB19510.14

    CE China EN61347-1, EN61347-2-13

    CB CB Countries IEC61347-1, IEC61347-2-13

    BIS India IS 15885(PART 2/SEC 13)

    UL USA UL 8750

    CUL Canada CSA C22.2 No.250.13

    KC South Korea K61347-1, K61347-2-13, K62384

    PSE Japan J61347-1, J61347-2-13

    SAA Australia AS/NZS IEC 61347-2-13

    AS/NZS 61347.1

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 6 / 14

    LTP Series - 240W High Bay Driver EMC COMPLIANCE

    EMC Category Country / Territory Standards

    CCC China GB 17743, GB 17625.1

    CE Europe

    EN 55015, EN 61000-3-2, EN 61000-3-3

    EN61000-4-2,3,4,5,6,8,11

    EN 61547

    KC South Korea K61547

    K00015

    PSE Japan J55015

    FCC USA FCC part 15

    NOTE:

    This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it

    depends also on the other devices connected to the driver and on the fixture itself.

    DALI STANDARDS

    IEC 62386 -101, 102, 207.

    INRUSH CURRENT WAVEFORM

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 7 / 14

    LTP Series - 240W High Bay Driver DERATING CURVE

    OUTPUT POWER VS INPUT VOLTAGE

    100

    80

    60

    40

    20

    0-40 -20 -5 10 25 50 60 70

    Ambient Temperature(℃)

    Load

    (%)

    115Vac

    230Vac

    Po/Pmax VS Input Voltage Curve

    90, 60%

    115, 100%

    0%

    20%

    40%

    60%

    80%

    100%

    120%

    90 110 130 150 170 190 210 230 250 270 290 310Input Voltage(Vac)

    Po/Pmax

    50°

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 8 / 14

    LTP Series - 240W High Bay Driver LIFETIME VS CASE TEMPERATURE

    EFFICIENCY VS LOAD

    LTP-240Y036(7.05A)

    LTP-240Y062(5.71A)

    LTP-240Y036(6.67A)

    LTP-240Y062(3.87A)

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 9 / 14

    LTP Series - 240W High Bay Driver POWER FACTOR VS LOAD

    TOTAL HARMONIC DISTORTION

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 10 / 14

    LTP Series - 240W High Bay Driver PROTECTIONS

    Parameter Notes

    Over Temperature Protection Decreases output current, returning to normal after over temperature is removed. The max derating could be 20% (typ.).

    Short Circuit Protection Constant current mode and auto recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed.

    Over Voltage Protection Run into protection model when output voltage exceeds limit, and return to normal when the fault

    0-10V/PWM DIMMING

    0 %

    1 0 %

    2 0 %

    3 0 %

    4 0 %

    5 0 %

    6 0 %

    7 0 %

    8 0 %

    9 0 %

    1 0 0 %

    0 V0 %0 KΩ

    1 V1 0 %1 0 KΩ

    2 V2 0 %2 0 KΩ

    3 V3 0 %3 0 KΩ

    4 V4 0 %4 0 KΩ

    5 V5 0 %5 0 KΩ

    6 V6 0 %6 0 KΩ

    7 V7 0 %7 0 KΩ

    8 V8 0 %8 0 KΩ

    9 V9 0 %9 0 KΩ

    1 0 V1 0 0 %1 0 0 KΩ

    . 0 - 1 0 V d c s i g n a l

    . P W M ( 1 0 V L e v e l 3 0 0 - 1 0 0 0 H z )

    . R e s i s t o r

    O u t p u t C u r r e n t V S D i m m i n g S i n g n a l

    Percentage of rated current

    DALI DIMMING

    20

    0

    10

    30

    40

    50

    60

    70

    80

    90

    100

    0 50 100 150 200

    Power level

    arc

    po

    we

    r(%

    )

    Linear dimming curve Logarithmic dimming curve

    250

    Note: Factory Default Output Logarithmic Curve

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 11 / 14

    LTP Series - 240W High Bay Driver

    MECHANICAL OUTLINE

    Note: LTP-240V types with no dimming

    Wire Specification Note

    AC Input A UL 18AWG L=300±20mm for UL

    CCC+VDE 3*1.0mm2 L=300±20mm for CE

    DC Output B UL 16AWG L=300±20mm for UL

    CCC+VDE 2*1.0 mm2 L=300±20mm for CE

    Dimming C UL 18AWG L=300±20mm for UL

    CCC+VDE 2*0.75 mm2 L=300±20mm for CE

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 12 / 14

    LTP Series - 240W High Bay Driver Optional Accessories:

    Holder:

    Ring:

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 13 / 14

    LTP Series - 240W High Bay Driver

    Hook:

  • Specification subject to change without notice

    www.mosopower.com Tel:+86-755-27657000 Email:[email protected] Form No.:FP-10-017RevA/1.0

    Page 14 / 14

    LTP Series - 240W High Bay Driver

    REVISION HISTORY

    Version Description of Change

    Date Notes Before Now

    A.1 - Datasheets Release 2018-03-14