1. Descriere dispozitiv

Pentru a putea accesa camera de pe telefonul mobil aveti nevoie de aplicatia “Xmeye”. In functie de sistemul de operare utilizat, Android sau iOS, puteti descarca si instala aplicatia scanand codul de mai jos sau cautand-o in Play Store sau App Store.

Xmeye

1 2 3

ButonSET/RESET

12

3 4

1. Interfata retea internet

2. Slot card microSD

3. Intrare alimentare

4. Difuzor incorporat

2. Instructiuni de utilizare

Conectati alimentatorul de 5V/2A la camera. Deschideti aplicatia “Xmeye” de pe telefonul mob i l . U t i l i za to r i i no i po t a l ege op t i unea “Register” (1) pentru a-si crea un cont, urmand instructiunile de pe ecran. Puteti utiliza si functia Local Login pentru

logare temporara rapida. Pentru mai multe detalii despre util izarea aplicatiei Xmeye consultati manualul de pe CD. Utilizatorii ce au deja un cont creat au 3 optiuni disponibile:- autentificare cu contul de iCloud (2)- accesare locala daca nu doresc autentificare (3)- conectare directa la camera (4)

Apasat i pe “+” pentru a adauga o camera in lista de dispozitive.

Asigurati-va ca telefonul este conectat la reteaua wireless pe care doriti sa inrolati camera. Verif icati numele retelei Wifi sa coincida cu reteaua dumneavoastra. D a c a e s t e p r i m a p o r n i r e a c a m e r e i continuati , daca aceasta camera a mai fost pornita/setata trebuie resetata: - tineti apasat butonul reset pana veti auzi un mesaj vocal de confirmare. - introduceti parola de accesare a retelei WiFi- verificati camera, sa fie pornita, cititi cele 2 mesaje de pe ecran si confirmati conditiile cu cele 2 bife.- apasati scurt butonul Reset/SET de pe camera si asteptati mesajul de confirmare vocala din partea acesteia; daca nu primiti confirmare prin mesaj vocal refaceti procedura de resetare a camerei, si procedura curenta de la capat.- selectati pe telefon “Done/Complete all the above operations” pentru a continua cu procedura de imperechere.

NOTA: acest model de camera nu are LEDindicator de conectare la wifi.

Selectat i mai intai opt iunea “Quick Configurate/WiFi Config”

Asteptat i pana cand pe ecran va apar camerele conectate in aceasi retea. Veti auzi un mesa j sonor de conf i rmare de la camera . Selectati dispozitivul dorit de pe ecran.

In interfata urmatoare trebuie sa introduceti numele dispozitivului (in functie de zona, locatie, camera), parola (implicit aceasta nu are parola) si apoi sa apasati butonul “OK”. In lista de dispozitive va aparea camera conf igura ta . Se lec ta t i -o pent ru a v izua l iza imaginea transmisa de aceasta.

Alternativ aveti si optiunea de a va conecta cu smartphone-ul direct la camera. Acest lucru este posibil doar la prima pornire sau dupa resetare totala. Asigurati-va ca telefonul nu este conectat la alta retea WiFi. Cand selectati c o n e c t a r e a d i r e c t a l a dispozitiv (AP connect), camera trebuie sa aibe activata functia de hot spot, si o veti putea gasi in lista de retele wifi de pe telefon. Parola implicita este “1234567890”.

Selectati camera dorita din lista.

11 LED-uri IRImaginea este clara chiar si in conditii de iluminare scazuta

Lentile HD

Microfon incorporat

Carcasa din ABS de calitate

Imagine mai clara si mai definita

Sistem PTZ DualRotire facila pe verticala si orizontala

Tehnologie de eliminare a zgomotelor, pentru un sunet mai clar

Eleganta si usor de curatat

4

Inel reglare focus Reglati claritatea imaginii

3. Indicatii de utilizare Imag in i le t ransmise de camera po t f i vizualizate pe telefon si veti putea controla camera din comenzile de pe ecran. Pentru setari suplimentare ale camerei de pe smartphone apasati Simbolul Home/Acasa din meniu.

1) Camera este destinata utilizarii la interior. Evitati contactul acesteia cu apa sau umezeala

2) Evitati lovirea sau scaparea camerei pe jos

3) Verificati tensiunea de alimentare inainte de conectarea alimentatorului la camera

4) Nu indreptati lentilele spre surse puternice de lumina (cum ar fi soarele sau un corp de iluminat etc), acest lucru va determina imagini supra-expuse si va scurta durata de viata a senzorului CMOS

5) Nu montati camera in medii umede, cu mult praf, temperaturi ridicate sau prea mici, in zone cu radiatii electromagnetice, etc.

6) Evitati atingerea directa a lentilelor. Curatarea camerei se efectueaza cu o carpa moale putin umezita, fara substante chimice.

7 ) D a c a a p a r s i t u a t i i i n c a r e c a m e r a n u functioneaza corespunzator, scoateti-o din priza si contactati distribuitorul.

4. Specificatii tehnice

Senzor imagineRezolutie Tip lentila Iluminare minima Unghi de vizualizare Filtru IR-CutFrecventa video Conexiune la internet Wireless Protocoale suportate Pan/Tilt Iluminare infrarosu Detectie de miscare Inregistrare video Microfon Difuzor Dimensiuni / Greutate Tensiune alimentare Putere consumata

CMOS ¼"720P, 1280 x 720pxf:3.6mm0.3 LuxOrizontala: 350°; Verticala: 90°Da50 Hz, 60 HzEthernet 10/100 Mbps RJ-45 Da, 802.11 b/g/nHTTP, FTP, TCP/IP, UDP, SMTP, DHCP, PPPoE, UPnPDa11 LED-uriDaLocal pe microSD si La distanta pe NVRDaDa145 x 142 x 116 mm / 313 g5 V6 W

1 2 3

5 6 74

9 10 118

13 14 1512

8) In zonele predispuse furtunilor cu descarcari e lec t r ice as igurat i -va ca pr iza la care a t i alimentat camera are impamantare.

9) Nu incercati sa desfaceti camera daca aceasta nu funct ioneaza corespunzator. Contactat i imediat distribuitorul.

10) Este interzisa orice interventie/desfacere a camerei sau prelungire a cablului de alimentare, acestea duc la pierderea garantiei.

11) Daca semnalul wifi este prea slab pot aparea pierderi de semnal, deconectari de la internet, erori de comunicare etc. Aigurati-va ca telefonul si camera se afla in aria de actiune a router-ului.

12) Pentru a imbunatati experienta utilizatorului cu produsul nostru, vom actualiza aplicatia periodic.

13) Daca apasati butonul “RESET” timp de 10s camera va confirma cu un mesaj vocal ca a revenit la setarile implicite din fabrica.

14) Daca pe telefonul mobil ruleaza prea multe aplicatii pot aparea probleme de comunicare intre acesta si camera, insa acest lucru nu va dauna inregistrarea pe cardul microSD.

Camera supraveghere cu IP PNI IP801W

Manual de utilizare

1. Device description

To access the camera from you mobile device you need the “Xmeye” app. According to the used operating system, Android or iOS, you can download and install the app scanning the QRcode bellow or searching it on Google Play Store or App Store.

Xmeye

1 2 3

SET/RESETbutton

12

3 4

1. Ethernet interface

2. MicroSD slot

3. Power IN

4. Built-in speaker

2. Using instructions

Connect the power adapter to the 5V/2A input of the camera. Open the “Xmeye” app on you mobi le dev ice . New users can choose the opt ion “Register” (1) to create a new account following the instructions on the screen.

You can also use the Local Login option for qu ick temporary log in. You can f ind more informations in the Xmeye manual on the CD. Users that have an account have 3 options:- Cloud login (2)- Local login, if they don’t want to user theiraccount (3)- Connect directly to the camera (4)

Press “+” to add a camera in the devicelist.

Make sure the smartphone is connected to the same wifi network as the camera. Check the name of the wifi network to be the same as your network. If this is the first time using the camera Daca e s t e p r i m a p o r n i r e a c a m e r e i f o l l o w t h e instructions bellow, if the camera was used before please reset it before configurating it: press reset button until you will hear a vocal confirmation mesage. - insert the wifi password- check the camera to be on, read the two mesages on the smartphone screen and check the two boxes to continue. - short press the SET/Reset button on the camera and wait for the vocal confirmation mesage. If you don’t hear the confirmation mesage please reset the camera again and repeat the configuration procedure. - select option “Done/Complete all the above operations” on the smartphone to continue.

NOTE: this camera model does not have aindicator LED for Wifi connection

Then select option “Quick Configurate /WiFi Config”

Wait for all the cameras in the network toappear on the screen. You will hear a vocal confirmation mesage. Select the desired device on the screen.

Next input the device name (acording to the camera location) and password (default there is no password), then press “OK”. In the device list you will see the camera. Select it to view the live image from it.

You can also connect to the camera directly from the smartphone. This option can only be used the first time you use the camera or after total reset. Make sure the smartphone is connected to the same wifi as the camera. When you select to connect directly to the camera (AP connect), the device should have the hot spot function activated, and you will be able to find it in the wi-fi network list on your mobile device. The default password is “1234567890”.

Select the desired camera from the list

11 IR LEDsClear image even in lowlight conditions

HD lens

Built-in microphone

Quality ABS case

Clearer and more defined image

Dual PTZ systemEasy horizontal and vertical rotation

Noise reduction technology forquality sound

Elegant and easy to clean

4

Focus ring Adjust image sharpness

3. User notes The video can be viewed on line and the device is under the control of the mobile device. For more options and settings press Home symbol in the menu.

1) For indoor use only and avoid water or moisture;

2) Avoid dropping or hitting the camera.

3) Check the voltage before connecting the poweradapter to the camera.

4) Do not point the lens to high light sources (like the sun, a lamp etc), because that will make the image over-bright and shorten the life of the CMOS sensor.

5) Do not mount the camera in moist, dusty, high or low temperature, electromagnetic radiation environement, etc.

6) Avoid direct touch to the lens. If cleaning is needed use a soft wet cloth, without chemical substances.

7) If the camera acts abnormal, unplug it from the power source and contact the supplier.

8) Please ground the equipment completely in the areas where lightning is frequent.

1 2 3

5 6 74

9 10 118

13 14 1512

9) Do not dismantle or open the equipment when it fails to work properly. Contact the supplier.

10) Any intrusion/undoing of the camera or improvisation to the power source will cause warranty loss.

11) If the Wi-fi signal is not strong enough you may experience video loss, interrupted internet connection, etc. Make sure your mobile device is the range of the wireless network.

12) To improve product user experience we will update the app for camera periodically.

13) If you press the “RESET” button for 10 sec the camera will be restored to factory settings. This will be confirmed by a vocal mesage.

14) If you use to many apps at the same time onyour phone you may experience communicationproblems with the camera, but this will not affectvideo recording on the microSD card.

IP Surveillance cameraPNI IP801W

User manual

4. Technical specification

Image sensorResolution Lens Min lightingView angle IR-CutVideo frequency Ethernet connectionWireless Protocols Pan/Tilt IR Motion detection Video recording Microphone Speaker Size / Weight Power voltage Power consumption

CMOS ¼"720P, 1280 x 720pxf:3.6mm0.3 LuxHorizontal: 350°; Vertical: 90°Yes50 Hz, 60 Hz10/100 Mbps RJ-45 Yes, 802.11 b/g/nHTTP, FTP, TCP/IP, UDP, SMTP, DHCP, PPPoE, UPnPYes11 LEDsYesOn microSD card On NVR by internetYesYes145 x 142 x 116 mm / 313 g5 V6 W