Legor Group USA info [email protected] … · • brazing, soldering • welding • electroplating & tarnish protection • waste control • equipment & materials management ... •

L e g o r G r o u p U S A [email protected] www.legorgroup.com 505-200-0423

TECHNICAL CONSULTING SERVICES

• LOST WAX CASTING, GRAINING & ALLOYING INVESTMENT, WAXES, MOLDS, SPRUING & TREE CONFIGURATIONS

• MASS FINISHING & HAND FINISHING

• BRAZING, SOLDERING

• WELDING

• ELECTROPLATING & TARNISH PROTECTION

• WASTE CONTROL

• EQUIPMENT & MATERIALS MANAGEMENT

• HANDS-ON PROCESS & TECHNIQUE TRAINING

Technical Consulting Services make you more profitable.Our technical consultants have a wealth of knowledge in the jewelry industry - over 70 years combined! We are making that expertise available to you and to make your processes, products and business even more successful.We understand that every manufacturing operation is unique and faces it’s own set of challenges. Our technical consulting services are customizable to your specific needs.For a minimal investment, our jewelry industry expert(s) will travel to your location to evaluate and streamline your existing processes.

mailto:[email protected]

http://www.legorgroup.com



INVESTMENT POWDER

4120400CASTER’S BLEND INVESTMENT POWDER44 LB BOX

4120402CASTER’S BLEND INVESTMENT POWDER10.5 LB BAG

4120404PREMIUM BLEND INVESTMENT POWDER44 LB BOX

4120406PREMIUM BLEND INVESTMENT POWDER10.5 LB BAG

FOV Premium Blend Investment PowderFeatures:• Unique formulation designed for higher

temperature alloys such as palladium white gold.

FOV Caster’s Blend Investment PowderFeatures:• Perfect for brass, bronze, silver and gold casting• Very fine surface for precise pattern duplication• Extended work time of up to 13 minutes• highly repeatable results• Wider range of water to powder mixing ratios• Easy and clean breakout in quenching• Consistent results when casting with vacuum or

centrifugal equipment






POLISHING COMPOUND

LUXI Polishing Compound - Low Speed (under 1,000 rpm), Low-TemperaturePurple Features:• Ideal for use with bristle brush wheels to polish intricate surfaces• Use with all jewelry alloys for surface scratch removal

Green Features:• Perfect for polishing platinum and titanium without creating an 'orange

peel' effect• Great choice for hand-polishing using a rotary tool with felt tips for

intricate surfaces• Use with a muslin buff for scratch removal (compares to 240 grit

sandpaper) or with a loose-fold flannel buff for a high-luster finish

4502814LUXI GREEN

LUXI Polishing Compound - Platinum and Stainless Steel - All Run at 3,450 rpmBlack Features:• For removing material in first-stage finishing tasks, starting even

before 180-grit sandpaper • Used on lap wheels or sisal buffs (best results using 150mm; ideal

for extra scratch removal from platinum for initial deep-scratch removal

Gray Features:• First stage scratch removal directly after 180 grit sandpaper. • Use with a 6" tight weave muslin buff

Fine Pink Features:• Used for the final polish with a non-treated muslin or felt stitched buffs

LUXI Polishing Compound - Gold, Silver, Bronze, Brass & other Standard Alloys - All Run at 3,450 rpmYellow Features:• Aggressive material and should be used following 240-320 grit

sandpaper and can also be used on polymers• Use with a treated or tight-weave muslin buff

Blue Features:• Use for scratch removal and final luster in one process • Use with un-stiched muslin or flannel buffs

Super-Fine White Features:• For final polish for most precious metals with an un-stiched muslin or

flannel buff

Red Features:• Use any time you would use traditional red rouge. It is ideal for final

polishing using a 6" loose-fold buff

Orange Features:• Use for a top-quality final high-luster, ideal for producing bright and

clean coloring of both gold and silver • Use with a 6" loose-fold buff

4502818LUXI PURPLE

4502816LUXI BLACK

4502810LUXI GRAY

4502804LUXI FINE PINK

4502806LUXI YELLOW

4502802LUXI BLUE

4502800LUXI SUPER-WHITE

4502808LUXI RED

4502812LUXI ORANGE

LUXI Polishing CompoundSilica-free polishing compound, composed of an alumina oxide abrasive in a water-soluble binder. This compound is safe, easy to clean up and produces an amazing finished.






GRINDING WHEELS

FOV Deburring Wheels / 7SFINFeatures:• Water resistant - can be used wet, dry or with oil• Formulated to resist smearing - yielding high quality &

consistent finishing• Non-metallic formulation - non-contaminating• Conformable and flexible - durable, versatile with excellent

cut rates• 1” hole with tapered spindle hole adapterApplication: ideal for light stock removal, casting clean-up, light spru removal & bright, consistent scratch pattern. Optimum grain and resin formulation offer durability and versatility at an exceptional cost

45387006” X 1” X 1”GRIT 7SFIN

45387026” X 1/2” X 1”GRIT 7SFIN

45387044” X 1” X 1”GRIT 7SFIN

FOV Blending & Polishing WheelsFeatures:• New-age construction - providing extra long life• Smear resistant - providing consistent finishes• Uniform blending and scratch pattern• 1” hole with tapered spindle hole adapterApplication: the mixture of minerals and resin are designed to remove deeper scratches while providing a consistent pre-polish finish. Multiple grades provide significant time saving during the pre-polish steps and reduce buff and polish time.

45387104” X 1” X 1”GRIT 280 - PURPLE

45387124” X 1” X 1”GRIT 400 - GREEN

45387144” X 1” X 1”GRIT 800 - GRAY

FOV PC Flap WheelsFeatures:• Unique flap construction helps save time with prep

finishing and cutting• Even mineral distribution providing a consistent and

uniform cut rate• Water resistant for cool running, finer finish• 1” hole with tapered spindle hole adapterApplication: designed to deliver a uniform cut rate while reducing operator fatigue. They wear away continually, exposing new mineral, providing a controlled stock removal and finish. Ideal for preparing metal for plating, blending out parting lines and removing defects. The range of grades provide coarse to fine cut rates and finish requirements.

45387205” X 1” X 1”GRIT 280 - BROWN

45387225” X 1” X 1”GRIT 400 - PURPLE

45387245” X 1” X 1”GRIT 800 - GREEN

45387265” X 1” X 1”GRIT 1000 - GRAY






ULTRASONIC CLEANERS

3.5Qt & 2Qt Super Finish Ultrasonic CleanersFeatures:• 37KHZ ultrasonic wavelength transducer,

ideal for deep cleaning jewelry; removing caked-on dirt, rouge and other polishing compounds

• Upgraded typical weak points;- waterproof heavy-duty ON/OFF switch- fiberglass in between the transducers

and tank- protected internal circuit board from

condensation damage• Arbe Machine Mfg., Inc. 1 year warranty

3.5Qt Specifications:• Machine Size: 7”L X 10”W X 10”H• Tank Size: 9.5”L X 5.5”W X 4”D• Transducer: 100W/37KHZ (Langevin Type)• Timer: 0-30 Minute• Heater: 0-90º Celsius Adjustable• Capacity: 3.5Qt / 3.3L / 0.75 Gal

2Qt Specifications: • Machine Size: 7”L X 7”W X 10”H• Tank Size: 6”L X 5.5”W X 4”D• Transducer: 50W/37KHZ (Langevin Type)• Timer: 0-30 Minute• Heater: Auto ON/OFF - 65º Celsius• Capacity: 2Qt / 1.8L / 0.5 Gal

KUC-3Q3.5QT ULTRASONIC

KUC-2Q2QT ULTRASONIC






ELECTROPLATING SYSTEMS

5L 5 Liter Systems

110 Volt Electroplating Systems - 2 Liter & 5 LiterFeatures:• Stainless steel anode bars for treatment tank,

(anodes not included)• Tanks are removable for changing and

cleaning and supported on safety catch tray• Each treatment tank is equipped with;

• Immersion quartz heater with feedback thermocouple

• Variable speed agitation• Polypropylene construction for

- Corrosion resistance- Lightweight

• All components accessible for replacement or repair

• Unmatched plating as the distance between the anodes and parts remain consistent run-to-run

5L System Option: • Stainless steel heater available for a

degreasing bath

2L 2 Liter Systems

30071716 STATION UNIT;3 - 2L TREATMENT &3 - 2L RINSE TANKS24” X 16.5” X 13.5”

30071703 STATION UNIT;1 5L TREATMENT &2 5L RINSE TANK31” X 14” X 14”

30071682 STATION UNIT;1 5L TREATMENT &1 5L RINSE TANK18.5” X 14” X 14”

30071692 STATION UNIT;2 - 5L RINSE18.5” X 14” X 14”






RECTIFIERS

Digital Volteq® Plating RectifiersFeatures:• Power: 110/220 volts (dual); 50-60Hz• Easy-to-read integrated LED digital readout• Coarse & fine voltage output control• Separate dials for voltage & amperage• Includes lead wires• One-year manufacturer’s warranty

ARBE Pro-Plater RectifierFeatures:• Power: 110 volts; 60Hz; 25 amp• 0-25 amp output, continuous duty• Analog control• Oversized heat sinks and built in cooling fan• High quality insulated lead and clamp set

30071775-AMP PLATING RECTIFIER5 1/4”W X 11 1/2”D X 6 1/4”HAPPLICATION:GENERAL PURPOSE

300717620-AMP PLATING RECTIFIER5 1/4”W X 11 1/2”D X 6 1/4”HAPPLICATION:IDEAL FOR E-COAT

300717520-AMP PLATING RECTIFIER10”W X 12”D X 6”HAPPLICATION:ELECTRO-CLEANING & LARGER PLATING SYSTEMS

300903425-AMP PLATING RECTIFIER9 1/2”W X 7 3/4”D X 6”HAPPLICATION:GENERAL PURPOSE






ANODES

Electrolytic Degreasing PowderFeatures: • Metallic surface activator prior to

electroplating• Alkaline base chemical for surface

preparation and cleaning• aka Electro-cleaner

Neutralizing Solution& SaltsFeatures: • 1L or 5L ready-to-use or 1Kg salt• Non-hazardous acidic salt for

neutralizing the degreasing solution that remains on the piece

• Prepares the metal surface for the plating process

PRE-TREATMENTS

Mixed Metal Oxide & Pt/Ti AnodesFeatures:• Titanium mesh base• Iridium-mixed-oxide or

Platinum coating• For precious metal solutions

Stainless Steel AnodesFeatures:• Mesh or solid• For degreasing, KLIAR

& CERAMIX

A-MO4.5X4MIX-OXIDE ANODE4.5” X 4”

A-MO4X2MIX-OXIDE ANODE4” X 2”

3004051PT/TI ANODE10CM X 20CM

3004012PT/TI ANODE5CM X 10CM

STAINLESS ANODES30040195CM X 20CM

30070865CM X 26CM

SGR1PDEGREASING POWDER1 KG

A-SS4X2STAINLESS MESH ANODE4” X 2”

A-SS4.5X4STAINLESSMESH ANODE4.5” X 4”

NEUT1SOLUTION5L

NEUT-SASALTS1 KG






Sold Separately

ADDITIONAL EQUIPMENT

Ductless Fume Extractor& StandHood Features:• 2 Filters: HEPA and carbon filters• Exhaust motor produces 600 cfm air flow• Solid steel construction• Mount on wall or set on stand (sold

separately)• Powder coated

Hood Stand Features:• Solid steel construction• Powder coated

Pen Plating SystemFeatures:• 110/220 V (dual) - 50/60Hz• Digital voltage control; 0.2 - 14V• 5 1/2”W X 5 1/2”D X 2 3/8”H• Resistant to acidic and alkaline solutions• 2 pen ports to run 2 colors at the same

time

Felt Pen TipsPlating Pen Features:• Use with any pen unit• Platinum collar for

superior and consistent deposition

• Long Lasting & corrosion resistant

3007154DUCTLESS FUME EXTRACTOR27”W X 17”D X 29”HWEIGHT: 60 LBS

3024021HOOD STAND27.5”W X 17”D X 23”HWEIGHT: 56 LBS

PENPLATSYS PENPLAT

3024009WHITE FELT PEN TIPSFINE POINT 25/PKG

3024013BROWN FELT PEN TIPSFINE POINT 25/PKG

3024011WHITE FELT PEN TIPSBULLET POINT 25/PKG

3024015DOUBLE-ENDED FELT PEN TIPS25/PKG

Solutions sold separately






RACKS & ACCESSORIES

30071734.5” DOUBLE RACK16 HOOKSFOR ALL SYSTEMS

30071725” ROUND RACK13 HOOKSFOR 5L SYSTEM ONLY

30071746.5” VERTICAL RACK10 HOOKSFOR ALL SYSTEMS

Plating RacksFeatures:• Brass rack• Steel hooks with Plastisol

coating

30070622L BEAKER

30070795L BEAKER

3024005STIRRING PELLETFOR 1L OR 2L SYSTEMS

3024006STIRRING PELLETFOR 5L SYSTEMS3007074

1L BEAKER

3007100

Carbon Filtration Kit for RhodiumFeatures:• Easy process for filtering

organic contaminants from Rhodium solutions

Visual Rhodium Concentration KitFeatures:• 6 known - 15mL Rh concentration

vials, ranging from 0.8g/L - 2.4 g/L• 10 empty test vials

3007153






PlatingTV Channel on Features:• New product launches• Tips, trick & techniques• Solution management and maintenance• General plating information

10590 2ND ST. NW, SUITE C ALBUQUERQUE, NM 87114

[email protected] WWW.LEGORGROUP.COM

+1 505 .200 .0423





Documents

Legor Group USA info [email protected] … · • brazing, soldering • welding • electroplating & tarnish protection • waste control • equipment & materials management ... •