LED LIGHTING led lighting led lighting led led led ... · Accessories NI) Specs B. C. D. A. Need Pic WH BL CH AB NI 1W (2700K / 4800K) 120 o 2 1/8 ” No Min Available colors - White,

LED LIGHTING led lighting led lighting led led led lighting led led lighting lighting ledL E Dligh�ng

3. A guide to LED lighting 4. Elli V 6. Elli 2 8. Smart LED l0. Pockit LED12. iMAGine LED14. Stellar LED16. Specs, Part numbers 23. Tresco International

3. A guide to LED lighting

4. Elli V

6. Elli 2

8. ilo LED

l0. Pockit® LED

12. iMAGine® LED

14. Stellar® LED

16. Specs, Part numbers

23. Tresco International®

CON

TEN

TS

Tresco Interna�onal® | 801 E. Middletown Rd. | N. Lima | OH | 44452 ph. 800/227/1171 | fax 800/841/2523 | email. [email protected]

www.trescointerna�onal.com

A. Currently there are around 10 major well-known LED manufacturers. These manu-facturers take all precautions necessary to create high quality LEDs. Static/Dust free clean rooms, the use of high grade phosphors and resins, controlled humidity/environment are all factors among many that can affect LED production. In addition, proper binning (grouping of LEDs based on similar param-eters) ensures each and every shipment of LED is the same. Poor LED manufacturers do not take these issues or steps seriously and thus inferior LEDs find their way into the market. Many manufacturers will either highlight the fact they use a major supplier or will furnish the information upon request.

Yes. Unlike traditional light sources the heat generated by a LED is not radiated from the surface. The heat is generated at the (+)/(-) junction. This temperature typically ranges from 35oC (95oF) to 65oC (149oF) depending on the LED being used. It is extremely impor-tant to keep junction temperature as low as possible. A 25oF increase in junction tempera-ture over a manufacturers recommendation can result in a 50% decrease in the life of the LED. Controlling the heat is done via circuitry and heat-sinking within the fixture design.

LED (light emitting diode) is a semiconductor diode formed by creating a (+)/(-) junction between materials. Upon applying a forward voltage the two meet at the junction and energy is released. This energy is in the form of light and heat.

A guide to LED ligh�ngWhat is LED ligh�ng?

Does LED get hot?

1-800-227-1171 / www.trescointerna�onal.com 3.

Can LEDs be dimmed?

How is LED life determined?

Good Vs. Bad LED Suppliers

LEDs work on the principle of constant current (amperage). As the current increases the LED output increases (junction temperature also increases). As the current decreases the LED output decreases. Because the junction temperature decreases when the LED is dimmed the LED may actually experience longer life. Dimmable LED systems, however, are solely dependent on the driving mechanism and circuit board construction. Consult manufacturer before attempting to dim.

Recent guidelines have split LED life into two categories: Useful Life and End of Life. Useful life is determined at the point when the LED is emitting 70% of its original light output. LED gradually dims over time. Therefore, the LED itself will continue to emit light well beyond the 70% threshold. The end of life is the point when the LED fails to emit light. Some manufacturers advertise 25, 50, or even 100,000 hours life without further defining the number. Consult manufacturer to determine if the number advertised is the useful life or end of life.

Currently there are around 10 major well-known light emitting diode manufacturers. These manufacturers take all precautions necessary to create high quality LEDs. Static/Dust free clean rooms, the use of high grade phos-phors and resins, controlled humidity/environment are all factors among many that can affect LED production. In addition, proper binning (grouping of LEDs based on similar parameters) ensures each and every shipment of LED is the same. Low-end LED manufacturers do not take these issues or steps seriously and thus inferior LEDs find their way into the market. Many LED fixture manufacturers will either highlight the fact they use a major supplier or will furnish the information upon request.

No heat-sink With heat-sink*

HEAT

COOL COOL

COOL

Useful End of life

Ligh

t Out

put

*The heat sink is a metal contact (commonly aluminum) on the LED to absorb the heat

Elli VElli VTh

e Tr

esco

ELL

I Ser

ies

4.

Tresco is proud to announce the ELLI V (ell•ee). The Elli V combines premium LEDs in a patent pending fi xture design. Its unique design allows for tight corner mounting while fi tting over glue or staples commonly found in cabinet and casework construction. The high output wide angle LEDs along with the fi xture to fi xture linking capability makes for perfect even illumination.

• Instant On, Instant Brightness

• Available in 6 lengths (10, 16, 22, 28, 34, 40”)

• Aluminum Finish (custom fi nish w/minimum)

• Linkable up to 12’ con� nuous (16’ max per transformer)

• 120 degree wide angle fl ood LED

• 3500K, 4800K Color Temperatures

• 3.6 Wa� s per foot

• 50,000 hour “useable” life� me*

Inst

alla

� on

Open area allows fi xture to fi t over glue or staples commonly found in cabinet and casework construction.

*Useable lifetime rated @ 70% of original output under ideal conditionsL I S T E D

C US

1-800-227-1171 / www.trescointerna� onal.com 5.

What is an ELLI? (ell•ee) Elli is defi ned as the personifi cation of long life and the translation of light. The Tresco development team began with this defi nition and fi nished with an LED brighter and with the longevity to set the industry standard. This LED was then combined with a unique design to become our premium Elli Series (Elli V, pronounced vee, and the Elli 2).

Acc

esso

ries

A. Rocker Switches - White or BlackB. DC 60W TransformerC. DC linking cords, 6”-70.8”D. On/Off Touch Switches

A.

B.

C.

D.

Specs

Max length of LED = 40”Max LED per run = 12’Watts per foot = 3.6Max Watts per transformer = 60

3/8”

1/2”

3/8”1/4”

10”16”22”28”34”40”

(see page 16 for the complete Elli V specs and part list)

The

Tres

co E

LLI S

erie

s

6.

(con

tinue

d)

Elli 2Elli 2

“Small but mighty” the Elli 2 offers high illumination in the most compact design. Utilizing premium LEDs and wide viewing angle, the square link-able fixtures are a perfect fit for applications requiring a flood of light while providing only a small fixture mounting area. With its low profile and low heat output the Elli 2 is sure to light up the toughest areas.

• Instant On, Instant Brightness


• Aluminum Finish (custom finish w/minimum)

• Linkable up to 12’ con�nuous (16’ max per transformer)

• 120 degree wide angle flood LED

• 3500K, 4800K Color Temperatures

• 3.6 Wa�s per foot

• 50,000 hour “useable” life�me*

• Quick U-CLip Moun�ng

*Useable lifetime rated @ 70% of original output under ideal conditionsFront view - inconspicuous lighting


see page 16-17 for the Elli V and the Elli 2 specs and part list

Acc

esso

ries


A.

B.

C.

D.

Specs

Max length of LED = 40”Max LED per run = 12’Watts per foot = 3.6 Max Watts per transformer = 60

Inst

alla

� on

7/16”

7/16”

10”16”22”28”34”40”

Underside view

Simple U-clip moun� ng

L I S T E DC US

B.

C.

D.

Ilo LEDilo L LED

8.

• Instant On/Instant Brightness

• Built-in diffuser to reduce glare


• Aluminum finish (custom finish w/minimum order)

• Linkable up to 12’ con�nuous run (24’ total per transformer)

• 90 degree viewing area

• 2.5 Wa�s per foot

• 25,000 hour “useable” life�me*

• 2700K or 4800K color temperatures

Accessories


When ambiance is needed the ilo L answers the call. Con-sidered a “sister” to the Elli 2 this compact linkable fixture provides for economical ambient lighting. Its added built-in diffuser creates a soft even glow for highlighting every ap-plication.

A.

*Usable lifetime rated @ 70% of original output under ideal conditions

Installa�on ilo L

L I S T E DC US


see page 18 for the Ilo LED (link and switch) specs and part list

ilo LED where? Interior cabinets, toe kicks, coves, wine racks, glass cabinets, book shelves, hutches, displays, plate racks, appliance garages. The perfect ambient light. Where do you need light?

Installa� on ilo S

Ilo LEDilo S LED

Specs

The ilo S is an excellent choice for applications requiring a stand-alone switched fi xture. The built-in on/off switch pro-vides instant illumination for undercabinet, closets, shelving, or simply use it as a nightlight. With the wire exiting the back, the installed fi xture gives the high-end appearance of being built-in.

• Instant On/Instant Brightness

• Built-in On/Off Switch and diff user

• Available in 4 lengths (10, 16, 24, 32”)

• Aluminum fi nish (custom fi nish w/minimum order)

• 90 degree viewing area

• 2.5 Wa� s per foot


• 25,000 hour “useable” life� me*

Toe Kick | Cove

*Useable lifetime rated @ 70% of original output under ideal conditions

ilo Lilo S

9/16”

15/32” 7/8”

7/16”

10”16”24”32”

7/8”

iLo SiLo L 10”

16”22”28”34”40”

L I S T E DC US

pockit ledPockit® LED

10.

The latest generation of Pockit® lighting incorporates futuristic bulb technology while maintaining the same great look of the original system. Through the use of 1W replaceable LED chips, accent lighting can be achieved at a fraction of the energy consumed and heat generated by traditional lights. The long life LED will keep your project looking great with minimal maintenance.

• Replaceable 1W LED chips

• Durable all metal construc� on

• 25,000 hour (end of life)

• Recess or surface mount

• Easy push on ring for quick LED replacement

• Five fi nishes, including an an� que brass


L I S T E DC US


Need Pic

Did you know?The original Tresco Xenon Metal Pockit® can be converted into a Pockit® LED. Two simple steps: 1.

Change the ELT60-CON (AC transformer) to a DC-ELT10-CON (If AC transformer is used damage

to the LED will occur). 2. Replace Xenon bulb with LED chip. Two steps and

you’re out of the past.

A. Rocker Switches - White or Black B. DC 10W Trans-former C. Extension cords, 1-3m D. On/Off Touch Switches E. Metal Surface mount ring (BL, WH, CH, AB, NI)

Acc

esso

ries

Specs

B.C.

D.

A.

Need Pic

WH

BL CH

AB

NI

1W (2700K / 4800K)

120o

2 1/8”

NoMin

Available colors - White, Black, Chrome, Antique Brass, Nickel

1/2”

1mm

Actual size shown

(see page 19 for the complete Pockit LED specs and part list)

IMagineThe Tresco® Power Track systemiMAGine®

Need adjustability? The Tresco® power track system eliminates the need for bulky and unsightly power strips. The low profile continuous track provides safe 12V power where you need it. All Tresco® LED systems can be used in conjunction with the track. The magnet connections provide for quick placement and movement of fixtures. A perfect solution for lighting shelving!

• Quick magnet connec�on - no piercing of wires

• Polished chrome finish

• Linkable track

• Fits most retail shelving systems

• Safe low-voltage power

12.

iMAGine® the possibili� es!! The Tresco® track system works in conjuction with all Tresco® LED products. One track and several lighting choices to choose from makes the iMAGine® great for shelving.


Acc

esso

ries

Specs

Inst

alla

� on

1/4”

1/8”

5/8”

1 - 7/16”

1 - 1/8”5/16”

1 - 1/4”

2”1/2”

39” maxcan be cut to shorter length

7/16”

3/16”

Track End Cap

Magnet

L I S T E DC US

Track Link

Power Feed

A.

B.

A. DC 60W TransformerB. DC Linking Cords (6”-70.8”)

12”

6.0”12.0”23.6”47.2”70.8”

(see page 20 for the complete iMAGine specs and part list)

14.

Stel

lar le

d Stel

lar®

LED

2-3/8”

L I S T E DC US

3”3”

1”

7/16”

Specs

3/8”

13”

4-3/4”

(see page 21 for the complete Stellar LED specs and part list)


• Durable all metal construc� on

• 50,000 hour life, replaceable MR-16 3W LED

• White/Black/Chrome fi nish (custom fi nish w/minimum order)

• 10’ Lead

• Fits standard 3” O.C. grid panels

• 6 lights per transformer* (see Accessories)


Tresco announces the newest addition to its popular Stellar line. The Stellar LED, an easy solution to lighting needs for grid panels (fi ts standard 3” O.C. grid panels). The base con-tains a “hook” for easy, tools free installation, and a Stellar head designed to fi t the new MR-16 LED.

Becoming “green” couldn’t be easier. The patented MR-16 bulb replaces all ex-isting 12V DC or magnetic 12V AC driven systems. Make the switch to green today.

Stel

lar le

dM

R-16

LED

*Accessories

A. DC 60W transformer (6 light max)B. DC 10W transformer (3 light max)

B.A.

(see page 21 for the complete Stellar LED specs and part list)

• Replaces standard MR-16 Halogen bulbs

• Patented die-cast design (for proper thermal management)

• 50,000 hour life

• Nickel Finish

• Use on 12V DC or magne� c 12V AC systems

• Consumes only 3 Wa� s


Part Number Dimensions Wa� Color Finish

LED-AGLPR-250CAL 10”L x 5/8”W x 7/8”H 3.6 4800K Aluminum






LED-AGLPR-250WAL 10”L x 5/8”W x 7/8”H 3.6 3500K Aluminum






Max length of LED = 40”Max LED per run = 12’Watts per foot = 3.6 Max Watts per transformer = 60

3/8”

1/2”

3/8”1/4”

10”16”22”28”34”40”

3/4”

54o

Part

s and

Spe

cifi c

atio

ns

16.

Elli V

See page 21. for ACCESSORIES

4”

L I S T E DC US


Max length of LED = 40”Max LED per run = 12’Watts per foot = 3.6Max Watts per transformer = 60

Elli 2

7/16”

7/16”

10”16”22”28”34”40”

3/4”

Part Number Dimensions Wa� Color Finish

LED-SQPR-250CAL 10”L x 7/16”W x 7/16”H 3.6 4800K Aluminum






LED-SQPR-250WAL 10”L x 7/16”W x 7/16”H 3.6 3500K Aluminum







4”

L I S T E DC US

Part

s and

Spe

cific

atio

ns

18.

Part Number Dimensions Wa� Color Finish Style

LED-LSP-250CNI 10”L x 9/16”W x 15/32”H 2.1 4800K Nickel Linkable






LED-LSP-250WNI 10”L x 9/16”W x 15/32”H 2.1 2700K Nickel Linkable






Max length of LED = 40”Max LED per run = 12’Watts per foot = 2.5Max Feet per transformer = 24’Max Watts per transformer = 60W

ilo link / switch

LED-SWLSP-250CNI 10”L x 9/16”W x 15/32”H 2.1 4800K Nickel Switch








9/16”

15/32”

10”16”22”28”34”40”

9/16”ilo L

ilo S

7/8”

7/16”

10”16”24”32”

7/8”

7/16”

ilo L

ilo S


L I S T E DC US

4”


Part Number Dimensions Recess Hole Wa� Color Finish

POC-LED-CWH-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 4800K White

POC-LED-CBL-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 4800K Black

POC-LED-CCH-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 4800K Chrome

POC-LED-CAB-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 4800K Antq. Brass

POC-LED-CNI-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 4800K Nickel/Stainless

POC-LED-WWH-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 2700K White

POC-LED-WBL-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 2700K Black

POC-LED-WCH-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 2700K Chrome

POC-LED-WAB-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 2700K Antq. Brass

POC-LED-WNI-M 2 - 7/8” dia. 2 - 1/8” dia. 1.0 2700K Nickel/Stainless

SPACER-WH-M 2 - 7/8” dia. Surface Mount Ring NA NA White

SPACER-BL-M 2 - 7/8” dia. Surface Mount Ring NA NA Black

SPACER-CH-M 2 - 7/8” dia. Surface Mount Ring NA NA Chrome

SPACER-AB-M 2 - 7/8” dia. Surface Mount Ring NA NA Antq. Brass

SPACER-NI-M 2 - 7/8” dia. Surface Mount RIng NA NA Nickel/Stainless

Pockit® LED

2-7/8”

2-1/8”

2-1/8”

1W LED

120o

2 1/8”

NoMin

3/4”

1/2”


L I S T E DC US

6 lights per transformer2m (79”) lead cord

Part Number Func�on Dimension Ra�ng Finish

MAG-TR-1M-CH 39” Track 39”L x 7/16”W x 3/16”H 60W Chrome

MAG-LINKTRK-15 Link track to track 6.0” (15cm) 60W Black





MAG-ECP-PWR Power feed end cap 1-7/16”L x 5/8” x 3/8”H 60W Black

MAG-ECP End Cap 1-7/16”L x 5/8” x 3/8”H 60W Black

MAG-ADPAMP-CH Magnet Connec�on 2-1/4”L x 3/8”W x 1-1/4”H 35W Chrome

LED-LINKD-15 Connect light to magnet or extends power lead to transformer

6.0” (15cm) 60W Red/Black

LED-LINKD-25 same as above 12.0” (25cm) 60W Red/Black

LED-LINKD-60 same as above 23.6” (60cm) 60W Red/Black

Part

s and

Spe

cific

atio

ns

20.

iMAGine®

1/4”

1/8”

5/8”

1 - 7/16”

1 - 1/8”5/16”

39” maxcan be cut to shorter length

7/16”

3/16”

1 - 1/4”

2”1/2”

Magnet


Track Link

Power Feed

Track

End Cap

L I S T E DC US

6.0”12.0”23.6”47.2”70.8”

12”


Part Number Dimension Wa� Color Finish

LEDSTL3-330WR-CWH 13”L x 4 3/4”H 3W 2700K White

LEDSTL3-330WR-CBL 13”L x 4 3/4”H 3W 2700K Black

LEDSTL3-330WR-CCH 13”L x 4 3/4”H 3W 2700K Chrome

LEDSTL3-330WR-WWH 13”L x 4 3/4”H 3W 4800K White

LEDSTL3-330WR-WBL 13”L x 4 3/4”H 3W 4800K Black

LEDSTL3-330WR-WCH 13”L x 4 3/4”H 3W 4800K Chrome

LB-LEDMR16-3W-CNI NA 3W 2700K Nickel

LB-LEDMR16-3W-WNI NA 3W 4800K Nickel

Stel

lar®

LED

Part Number Decscrip�on Compa�ble Products

DC-ELT60-CON DC 60W transformer All LED systems

DC-ELT10-CON DC 10W transformer Pockit LED, Stellar LED

LED-LINKD-* (*15,25,60,120,180)

15cm (6”), 25cm (12”), 60cm (23.6”), 120cm (47.2), 180cm (70.8”) LED linking cords w/AMP ends

Elli V, Elli 2, ilo L, ilo S, iMAGine

EXT-*(*1M, 2M, 3M)

1m (3’), 2m (6’), 3m (9’) linking cords w/AMP ends

Pockit LED, Stellar LED

TS2-72 On/Off touch switch All LED Systems

RDSW-1M-WH 1m (3’) White round switch All LED Systems

RDSW-2M-WH 2m (6’) White round switch All LED Systems

RDSW-1M-BL 1m (3’) Black round switch All LED Systems

RDSW-2M-BL 2m (6’) Black round switch All LED Systems

AUSW-MAG-BR Brown magne�c switch, 15 Wa� max All systems (max 15W)

AUSW-MAG-WH White magne�c switch, 15 Wa� max All systems (max 15W)

Acc

esso

ries

3/8”

13”

4-3/4”

2-3/8”

3” 3”

1”

7/16”

L I S T E DC US10’ lead cord

Founded in 1989 with its fi rst proprietary product sold in 1993, Tresco has rapidly grown to become a leader in the lighting industry. Since its inception, product offerings have increased several times creating the need for expanded facilities and staff. To better serve our customers Tresco doubled its capacity with the construction of a new modern facility in 2003. In 2007 the offi ces were expanded which included a new testing facility.

To exceed market demands through the development of innovative and affordable products reinforced by unequaled quality and service.

trescoTrescoInternational

GRO

WTH

MISSION

22.


• Trained and friendly staff

• Website to allow 24 hour access to product informa� on

• Research and development department to meet special customer requirements

• UL/ETL listed products

• Auto shipping confi rma� on with tracking numbers

• Quick ship / Orders placed by 1:00pm (EST) ship same day

Tresco Interna� onal801 E. Middletown Rd.North Lima, OH 44452

Phone: 800-227-1171 / 330-549-2230Fax: 800-841-2523 / 330-549-2260

www.trescointerna� [email protected]

SERV

ICE

CONTACT

� � � � � � �C US��

ETL and UL are privately owned and are not government funded. UL is the largest in the USA, while ETL is the largest worldwide. Both are Nationally Recognized Testing Laborato-ries (NRTL) as recognized by OSHA and local inspectors. No mark is better than the other, each serving as proof of product compliance to US and Canadian standards.

ETL or UL?

LED LIGHTING led lighting led lighting led led led lighting led led lighting lighting led

Tresco Interna�onal | 801 E. Middletown Rd. | N. Lima | OH | 44452 ph. 800/227/1171 | fax 800/841/2523 | email. [email protected]

Documents

LED LIGHTING led lighting led lighting led led led ... · Accessories NI) Specs B. C. D. A. Need Pic WH BL CH AB NI 1W (2700K / 4800K) 120 o 2 1/8 ” No Min Available colors - White,