Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
www.womgroup.com
LEADINGTHROUGH
INNOVATIONWOM INDIACERTIFICATIONS
Page 1 of 6
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
FULL QUALITY
ASSURANCE CERTIFICATE Certificate No.:
113759-2012-CE-IND-ACCREDIA
This certificate consists of 6 pages
Initial date:
26 September, 2006
Valid:
18 February, 2019 to 13 December, 2021
This is to certify that the quality system of
Worldwide Oilfield Machine Pvt. Ltd. Gat No. 778, At & Post Velu, Taluka Bhor, Pune – 412 205, Maharashtra, India.
has been assessed and found to comply with respect to the conformity assessment procedure described in:
ANNEX III MODULE H OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure Accessories
Product Name Valves
Place and date: Vimercate; 19 February, 2019
For the notified body 0496: DNV GL Business Assurance Italia
S.r.l.
______________________________________________________________________________
Nicola Privato
Management Representative
Page 2 of 6
Certificate No.: 113759-2012-CE-IND-ACCREDIA
Place and date: Vimercate; 19 February, 2019
Revision No: 04
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Jurisdiction
Application of Directive 2014/68/EU and Decreto Legislativo n. 26 of 15 February 2016
Certificate history
Revision Description Issue Date
04 Recertification by DNVGL Business Assurance Italia S.r.l 19 February, 2019
03 Scope Extension by DNVGL Business Assurance Italia S.r.l 17 November, 2017
02 Recertification by DNVGL Business Assurance Italia S.r.l 28 December,2015
01 Re-certification by Det Norske Veritas Italia S.r.l. 19 March, 2013
00 Re-issue of certificate with scope extension, certificate No. 113759-
2012-CE-IND-ACCREDIA issued by Det Norske Veritas Italia S.r.l. 28 March, 2012
01 Scope extension – new products added, certificate No. 62628-
2009-CE-IND-DNV by Det Norske Veritas Italia S.r.l. 27 July, 2011
00 Re-certification, certificate No. 62628-2009-CE-IND-DNV issued by
Det Norske Veritas AS, Norway 07 October, 2009
00 Original certificate No. 06-SKM-PED-H-267110-00 issued by Det
Norske Veritas Inspection AB, Sweden 26 September, 2006
Products covered by this certificate
Product Name MAGNUM GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16” Flg x
5-5/8 Bore
7-1/16” Flg x
8-1/8” Bore
7-1/16” Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K
10K -
20K
3K -
20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 3-1/16” - 15K
Type of material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM HYDRAULIC GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16”
3-
1/8”
3-
1/16”
4-
1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K
3K -
5K
10K -
20K
3K -
20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 4-1/16” - 5K
Type of material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM MODEL 200M GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8 Bore
7-1/16”Flg x
8-1/8 Bore
7-1/16”Flg x
8-3/8 Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K 10K -20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 3-1/8” - 3K
Type of material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM MODEL 200M HYDRAULIC GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16”
3-
1/8”
3-
1/16”
4-
1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K
3K -
5K
10K -
20K
3K -
20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 2-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Page 3 of 6
Certificate No.: 113759-2012-CE-IND-ACCREDIA
Place and date: Vimercate; 19 February, 2019
Revision No: 04
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Product Name MAGNUM MODEL 200 GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K 10K -20K 3K -20K
3K -
20K 3K-20K 3K -20K 3K -20K 3K -20K
Sample 3-1/8” - 3K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM MODEL 200 HYDRAULIC GATE VALVES
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8”
3-
1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K
10K -
20K 3K -20K 3K -20K 3K-20K 3K -20K 3K -20K 3K -20K
Sample 2-9/16” - 5K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM SUB-SEA HYDRAULIC FAIL SAFE GATE VALVES-DRILLING & PRODUCTION APPLICATION
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K 10K -20K 3K -20K 3K -20K 3K-20K 3K -20K 3K -20K 3K -20K
Sample 2-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM SUB-SEA HYDRAULIC FAIL SAFE GATE VALVES-DRILLING & PRODUCTION APPLICATION
Product
Description
Size 9”
Pressure
rating (psi) 3K -20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM SUB SEA MANUALGATE VALVES-DRILLING & PRODUCTION APPLICATION
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K 10K -20K 3K -20K 3K -20K 3K-20K 3K -20K 3K -20K 3K -20K
Sample 5-1/8” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM SUB-SEA GATE VALVES O/W ROV DRILLING & PRODUCTION APPLICATION
Product
Description
Size 1-
13/16”
2-
1/16”
2-
9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
7-
1/16”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating (psi)
3K -
20K
3K -
20K
3K -
20K 3K -5K 10K -20K 3K -20K
3K -
20K
3K-
20K 3K -20K 3K -20K 3K -20K
Sample 4-1/16” - 5K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name MAGNUM SUB-SEA GATE VALVES O/W ROV DRILLING & PRODUCTION APPLICATION
Product
Description
Size 9”
Pressure
rating (psi) 3K - 20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name CHOKE MANIFOLD
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/8” - 5K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Page 4 of 6
Certificate No.: 113759-2012-CE-IND-ACCREDIA
Place and date: Vimercate; 19 February, 2019
Revision No: 04
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Product Name WOM ADJUSTABLE CHOKES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 2-9/16” - 20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM ADJUSTABLE CHOKES-SLIM LINE TYPE
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM HYDRAULIC CHOKES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM POSITIVE CHOKES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 5-1/8” - 5K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM POSITIVE CHOKES-SLIM LINE TYPE
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” – 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM DRILLING CHOKES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM BLEED OFF CHOKES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM PNEUMATIC VALVES
Product
Description
Size 1-
13/16”
2-
1/16”2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure rating
(psi)
3K -
20K
3K -
20K 3K -20K 3K -5K 10K -20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 7-1/16” RB - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Page 5 of 6
Certificate No.: 113759-2012-CE-IND-ACCREDIA
Place and date: Vimercate; 19 February, 2019
Revision No: 04
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Product Name MAGNUM SSV GATE VALVES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8” 7-1/16”Flg x
5-5/8” Bore
7-1/16”Flg x
8-1/8” Bore
7-1/16”Flg x
8-3/8” Bore
Pressure
rating
(psi)
3K -20K 3K -20K 3K -20K 3K -5K 10K -20K 3K -20K 3K -20K 3K -20K 3K -20K 3K -20K
Sample 2-1/16” - 10K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM CHECK VALVES
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure rating
(psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K
3K-
20K
Sample 2-9/16” - 20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name WOM PUMP SAVER
Product
Description
Size 1-13/16” 2-1/16” 2-9/16” 3-1/8” 3-1/16” 4-1/16” 5-1/8”
Pressure
rating (psi) 3K-20K 3K-20K 3K-20K 3K-5K 10K-20K 3K-20K 3K-20K
Sample 3-1/16” - 15K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name DUAL SEAL BALL VALVES
Product
Description
Size 2” – 36” 2” – 36” 2” – 36” 2” – 30” 2” – 16” 2” – 12”
Class rating 150 300 600 900 1500 2500
Sample 10” – Class 600
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name DOWNSTREAM DATA HEADER ASSEMBLY
Product
Description
Size 2-1/16” 2-9/16” 3” 3-1/8” 3-1/16” 4-1/16”
Pressure
rating (psi) 3K – 15K 3K – 15K 2K – 15K 3K – 5K 10K – 15K 3K – 15K
Type of material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name PLUG VALVE MODEL 700
Product
Description
Size 1-13/16” to 5-1/8”
Pressure rating (psi) 2K to 20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name GATE VALVE MODEL 600
Product
Description
Size 1-13/16” to 5-1/8”, 7 1/16”
Pressure rating (psi) 2K to 20K
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 as per approved PMA
Product Name BALL VALVE (SOFT SEATED & METAL SEATED) MODEL 40
Product
Description
Size 2” to 36”
Class rating 900
Sample 6” – Class 900
Type of Material Ferritic / Duplex & Low Alloy steel / Inconel / SS410 / 4130 / 4140 / Carbon steel / WCC / WCB / 350
LF2 / LCC as per approved PMA
Page 6 of 6
Certificate No.: 113759-2012-CE-IND-ACCREDIA
Place and date: Vimercate; 19 February, 2019
Revision No: 04
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Applied standards
ASME B16.34, ASME B16.10, ASME B16.5, ASME B16.47, ASME B16.25, API 6D/ ISO 14313, ASME Sec.
VIII Div.1, ASME Sec. VIII Div. 2, ASME Sec. II Part D, API 6A/ ISO 10423, API 6FA, API 16C, API 17D
& ISO 5208.
Sites covered by this certificate
Site Name Site Address Audited by Date Report Ref
Worldwide Oilfield
Machine Pvt. Ltd.
Gat No. 778, At Post Velu, Taluka
Bhor, Pune - 412 205, India
Jaison Jose 19th to 21st
November 2018
Audit Report
Dt: 2018-11-21
Applications/limitations
- Intended for Group 1 and 2 fluids. Pressure Equipment Category I to III; - Pressure equipment covered by PED Article 4 Paragraph 3 shall not be CE-marked; - all bought-outs shall comply with applicable EU Directive (actuators, rupture discs, limit & proximity
switches & chokes);
Terms and conditions for the certificate
Valid terms and conditions are found in the DNV GL´s PED Certification Rules
END OF CERTIFICATE
MANAGEMENT SYSTEM CERTIFICATE
Certificate No: 274563-2018-AQ-IND-UKAS
Initial certification date: 19, October, 2006
Valid: 19, October, 2018 - 18, October, 2021
This is to certify that the management system of
Worldwide Oilfield Machine Pvt. Ltd. Gat No. 778, At & Post Velu, Taluka Bhor, Pune – 412 205, Maharashtra, India and the sites as mentioned in the appendix accompanying this certificate
has been found to conform to the Quality Management System standard: ISO 9001:2015
This certificate is valid for the following scope: Design, manufacture and supply of surface and subsea wellhead and christmas tree equipment, drill through equipment, choke and kill manifold systems, subsea and downstream pipeline valves; bolting Repair, remanufacture, refurbishment and overhauling of equipment for the oil and gas industry
Manufacture and supply of machined components
Manufacture and supply of castings and ingots of various material grades in cast heat treated condition or cast heat treated and machined condition
Manufacture and supply of forged heat treated and machined components
Place and date: For the issuing office: Chennai, 28, September, 2018 DNV GL – Business Assurance
ROMA, No. 10, GST Road, Alandur, Chennai - 600 016, India
Sivadasan Madiyath Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance UK Limited, 4th Floor, Vivo Building, 30 Stamford Street, London, SE1 9LQ, United Kingdom. TEL:+44(0) 203 816 4000. www.dnvgl.co.uk
Certificate No: 274563-2018-AQ-IND-UKAS Place and date: Chennai, 28, September, 2018
Appendix to Certificate
Worldwide Oilfield Machine Pvt. Ltd. Locations included in the certification are as follows:
Site Name Site Address Site Scope Worldwide Oilfield Machine Pvt. Ltd.
Gat No. 778, At & Post Velu, Taluka Bhor, Pune – 412 205, Maharashtra, India
Design, manufacture and supply of surface and subsea wellhead and christmas tree equipment, drill through equipment, choke and kill manifold systems, subsea and downstream pipeline valves; bolting Repair, remanufacture, refurbishment and overhauling of equipment for the oil and gas industry
Manufacture and supply of machined components
Magna Casting and Machine Works Pvt. Ltd.
Gat No. 777, At & Post Velu, Taluka Bhor, Pune - 412 205, Maharashtra, India
Manufacture and supply of castings and ingots of various material grades in cast heat treated condition or cast heat treated and machined condition
Magnum Forge and Machine Works Pvt. Ltd.
Gat No. 777, At & Post Velu, Taluka Bhor, Pune - 412 205, Maharashtra, India
Manufacture and supply of forged heat treated and machined components
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance UK Limited, 4th Floor, Vivo Building, 30 Stamford Street, London, SE1 9LQ, United Kingdom. TEL:+44(0) 203 816 4000. www.dnvgl.co.uk
Page 1 of 1
RECOGNITION CERTIFICATE
Certificate No: MSARC0000AU4 Revision No: 1
This is to certify:
That DNV GL recognizes the manufacturer’s procedures and processes for production and quality control applied for the manufacturing of the below products. The procedures and processes have been found to meet the quality and safety levels set forth in the DNV GL Rules.
for product(s) Offshore Containers & Portable Offshore Units
Manufacturer
Worldwide Oilfield Machine Pvt. Ltd PUNE, India
This Certificate is valid until 2021-01-10.
Issued at Mumbai CMC on 2017-02-09
for DNV GL
This document has been digitally signed and will therefore not have handwritten signatures
Basu, Partha Principal Surveyor
Successful periodical assessments are a precondition for the validity of this certificate. The current status of the certificate is shown on http://approvalfinder.dnvgl.com/
Form code: MSA 301 Revision: 2016-06 www.dnvgl.com Page 1 of 1 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
Q1-2167
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
No Exclusions Identified as Applicable
Effective Date:Expiration Date:
Registered Since:
OCTOBER 22, 2019OCTOBER 22, 2022OCTOBER 22, 2013
Vice President of Global Industry Services
Design, Manufacture, Supply and Service of Surface and Subsea Wellhead andChristmas Tree Equipment, Drill Through Equipment, Choke and Kill Manifold
Systems, Subsea and Downstream Pipeline Valves; Manufacture of Bolts;General Machining Services; Repair, Remanufacture, Refurbishment and
Overhauling of Equipment for the Oil and Gas Industry
20E-0043
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
API-20E
20E-0043
QMS Exclusions: Design and Development
Effective Date:Expiration Date:
OCTOBER 22, 2019OCTOBER 22, 2022
Vice President of Global Industry Services
The scope of this license includes the following: Studs, Machined Bolts, Screws and Nuts -All / Machined atBSL 1, BSL 2, BSL 3; Hot Formed Bolts and Screws, Hot Formed Nuts -< 1.50 in / Machined at BSL 1, BSL 2,BSL 3, -≥ 1.50 in / Machined at BSL 1, BSL 2, BSL 3
6A-0203.1
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
API-6A
6A-0203.1
QMS Exclusions: No Exclusions Identified as Applicable
Effective Date:Expiration Date:
OCTOBER 14, 2019OCTOBER 22, 2022
Vice President of Global Industry Services
The scope of this license includes the following: Casing and Tubing Heads, Chokes, Cross-Over Connectors,Blind and Test Flanges, Tees and Crosses, Threaded Connectors, Top Connectors, Adapter Spools andSpacer Spools, Slip-Type Hangers, Mandrel-Type Hangers, Gate, Ball, Plug Valves, Check Valves at PSL 1,PSL 2, PSL 3; Surface Safety Valves at PSL 2, PSL 3; Back Pressure Valves; Bullplugs; Pneumatic andHydraulic Actuators; Ring Gaskets; Valve Removal Plugs
6D-0548
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
API-6D
6D-0548
QMS Exclusions: No Exclusions Identified as Applicable
Effective Date:Expiration Date:
OCTOBER 22, 2019OCTOBER 22, 2022
Vice President of Global Industry Services
The scope of this license includes the following: Ball Valves
16A-0080.1
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
API-16A
16A-0080.1
QMS Exclusions: No Exclusions Identified as Applicable
Effective Date:Expiration Date:
OCTOBER 22, 2019OCTOBER 22, 2022
Vice President of Global Industry Services
The scope of this license includes the following: Hub and Clamp Connectors, Adapters, Drilling Spools, AnnularBOP, Ram Blocks, Packers, and/or Top Seals and Ram BOP
16C-0200
WORLDWIDE OILFIELD MACHINE PVT., LTD. At & Post Velu, Gat No. 778
Tal Bhor Pune, Maharashtra
India
API-16C
16C-0200
QMS Exclusions: No Exclusions Identified as Applicable
Effective Date:Expiration Date:
OCTOBER 22, 2019OCTOBER 22, 2022
Vice President of Global Industry Services
The scope of this license includes the following: Drilling Chokes, Drilling Choke Controls, Drilling ChokeActuators and Choke and Kill Manifold Buffer Chamber