7
Communications Systems | LBC3201/00 Line array loudspeaker, 60W LBC3201/00 Line array loudspeaker, 60W www.boschsecurity.com u Extended listening area u Excellent intelligibility of speech and music u Uniform distribution of natural sound throughout the room u Excellent directivity for use in acoustically difficult, reverberant applications u EN 54‑24 certified This loudspeaker, with its excellent directivity and high power output, can handle medium and large (reverberant) indoor environments, especially the more acoustically challenging ones. It is typically used in congress venues, meeting halls and places of worship. The full frequency range of the LBC 3201/00 makes it ideal for speech as well as music reproduction. Its exceptionally narrow housing (only 8 cm wide) makes it extremely unobtrusive. System overview A time and labor-saving mounting method has been developed for the LBC 3201/00. The loudspeaker comes with a chart, which shows the ideal installation height for the area that the loudspeaker has to cover. Once the appropriate height has been determined for a given area, the loudspeaker is mounted at an angle marked on the mounting bracket. This procedure is much simpler and more accurate than traditional trial and error installation methods. The LBC 3201/00 can be mounted on a wall or directly onto a floor stand LBC 1259/01 with an M10 threaded bolt without additional accessories. Dimensions in mm of mounting bracket included (with marked angle)

LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Communications Systems | LBC3201/00 Line array loudspeaker, 60W

LBC3201/00 Line array loudspeaker, 60W

www.boschsecurity.com

u Extended listening area

u Excellent intelligibility of speech and music

u Uniform distribution of natural sound throughoutthe room

u Excellent directivity for use in acoustically difficult,reverberant applications

u EN 54‑24 certified

This loudspeaker, with its excellent directivity and highpower output, can handle medium and large(reverberant) indoor environments, especially themore acoustically challenging ones. It is typically usedin congress venues, meeting halls and places ofworship. The full frequency range of the LBC 3201/00makes it ideal for speech as well as musicreproduction. Its exceptionally narrow housing (only8 cm wide) makes it extremely unobtrusive.

System overview

A time and labor-saving mounting method has beendeveloped for the LBC 3201/00. The loudspeakercomes with a chart, which shows the ideal installationheight for the area that the loudspeaker has to cover.Once the appropriate height has been determined fora given area, the loudspeaker is mounted at an anglemarked on the mounting bracket. This procedure ismuch simpler and more accurate than traditional trialand error installation methods. The LBC 3201/00 canbe mounted on a wall or directly onto a floor standLBC 1259/01 with an M10 threaded bolt withoutadditional accessories.

Dimensions in mm of mounting bracket included (withmarked angle)

Page 2: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Detail mounting bracket

Dimensions in mm

Mounted on optional loudspeaker stand (LBC 1259/01)

Functions

Range of applicationThe LBC 3201/00 is part of the XLA 3200 (eXtendedListening Area) range of line array loudspeakers.Advanced filtering and positioning of the loudspeakerdrivers has resulted in greatly improved audiodirectivity. Each speaker driver produces a dedicatedfrequency range. The specially developed high qualitydrivers enable reproduction of remarkably clear,natural sound, which gives excellent intelligibility ofboth speech and music.The difference between a conventional columnloudspeaker and this line array is noticeable in severalways. There is uniform sound distribution throughoutthe whole listening area: not too loud at the front, notto quiet at the back. All relevant frequencies arepresent everywhere in the listening area. Greatercoverage is achieved, so more people can be reachedwith speech and music with a higher intelligibilitylevel. All these important features give the experienceof a very natural sound quality in the whole listeningarea.

Easy installationThe advanced filtering generates larger verticalopening angles for high frequencies, so there is lessnarrow 'beaming' of higher tones in the vertical plane.As an example, at 4 kHz the vertical opening angle is

2 | LBC3201/00 Line array loudspeaker, 60W

Page 3: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

still 22°. Having more constant vertical opening anglesmakes installation easier, as the positioning of theloudspeakers is less critical because they cover awider area. An extremely wide horizontal openingangle of 132° at 4 kHz means that a single loudspeakercan provide natural sound reproduction over anextensive listening area.

Suppressed Side LobesAll conventional column loudspeakers produce a mainlobe of sound, which is directed at listeners, as well asa number of unwanted side lobes. The LBC 3201/00has highly suppressed side lobes in the vertical plane,typically at least 10 dB suppression of the 250 Hzoctave band at 90°, resulting in a much clearer, less'colored' sound, even when close to the loudspeakers.This gives the line array superb speech intelligibility.

Sound ReproductionThe positioning and very high quality of the 2-inchdrivers contribute significantly towards making theLBC 3201/00 a very efficient line array. With a soundpressure level of 110 dB at 1 m, and at 60 W, loud andclear sound reproduction is possible even atconsiderable distances from the loudspeaker.The high-quality loudspeaker drivers used in theLBC 3201/00 give excellent, natural soundreproduction of frequencies ranging from 190 Hz to18 kHz. Together with the constant directivity, thisensures that all important frequencies are heard in thelistening area.

Emergency CompliantThe loudspeaker has a ceramic terminal block, athermal fuse, and heat-resistant, high-temperaturewiring. These ensure that, in the event of a fire,damage to the loudspeaker does not result in failure ofthe circuit to which it is connected. Thus, systemintegrity is maintained, and loudspeakers within thesame loudspeaker zone in other areas can still be usedto inform people of the situation.The three-way ceramic terminal block with screwconnections is suitable for loop-through wiring, and islocated in a compartment at the base of theloudspeaker column. There is also a switch, whichallows the selection of nominal full power (60 W), halfpower (30 W) or quarter power (15 W). Thecompartment has knockout slots for accommodatingcables.

Certifications and approvals

All Bosch loudspeakers are designed to withstandoperation at their rated power for 100 hours inaccordance with IEC 268-5 Power Handling Capacity(PHC) standards. These loudspeakers also complywith the Simulated Acoustical Feedback Exposure(SAFE) test, which demonstrates that they canwithstand acoustical feedback at full power for shortdurations. This ensures extra reliability under extreme

conditions, leading to higher customer satisfaction,longer operating life, and much less chance of failureor performance deterioration.

Safety acc. to EN 60065 and CE

Emergency acc. to EN 54‑24 / BS 5839‑8 /EN 60849

Water and dust protection acc. to IEC 60529, IP 32

Impact acc. to EN 50102, IK 07

Region Regulatory compliance/quality marks

Europe CPR

CE DOP

CE DECL EC LBC3201_00

Poland CNBOP

Installation/configuration notes

Circuit diagram

Frequency response

250Hz

500Hz

1kHz

2 kHz 4 kHz 8 kHz

SPL 1.1 88 92 92 91 91 86

SPL max. 106 110 110 109 109 104

Q-factor 2.2 3.2 6.5 12.6 23.4 53.3

H. angle(deg)

360 360 210 192 132 100

V. angle(deg)

107 67 50 33 22 12

Acoustical performance specified per octave

3 | LBC3201/00 Line array loudspeaker, 60W

Page 4: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Polar diagram (horizontal)

Polar diagram (vertical)

Polar diagram (horizontal)

Polar diagram (vertical)

4 | LBC3201/00 Line array loudspeaker, 60W

Page 5: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Polar diagram (horizontal)

Polar diagram (vertical)

Polar diagram (horizontal)

Polar diagram (vertical)

5 | LBC3201/00 Line array loudspeaker, 60W

Page 6: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Polar diagram (horizontal)

Polar diagram (vertical)

Polar diagram (horizontal)

Polar diagram (vertical)

Parts included

Quantity Component

1 LBC 3201/00 Line arrayloudspeaker

1 Wall mounting bracket

6 | LBC3201/00 Line array loudspeaker, 60W

Page 7: LBC3201/00 Line array loudspeaker, 60Wresource.boschsecurity.com/documents/LBC_3201_00_Data...Detail mounting bracket Dimensions in mm Mounted on optional loudspeaker stand (LBC 1259/01)

Quantity Component

1 Attachment piece

1 Installation chart

Technical specifications

Electrical*

Rated power 60 / 30 / 15 W

Sound pressure levelat 60 W / 1 W (1 kHz, 1 m)

110 dB / 92 dB (SPL)

Sound pressure levelat 60 W / 1 W (1 kHz, 4 m)

92 dB / 76 dB (SPL)

Effective frequency range(-10 dB)

190 Hz to 18 kHz

Opening angle 1 kHz / 4 kHz (-6 dB)

horizontal 210° / 132°

vertical 50° / 22°

Rated input voltageRated impedance

100 V

60 W 167 Ohm

30 W 333 Ohm

15 W 667 Ohm

Connector Screw terminal block

*) Technical performance data acc. to IEC 60268-5

Mechanical

Dimensions (H x W x D) 1200 x 80 x 90 mm(47.24 x 3.15 x 3.54 in)

Weight 6,4 kg (14,1 lb)

Color Light gray (matches RAL 9022)

Environmental

Operating temperature -25 ºC to +55ºC (-13 ºF to +131 ºF)

Storage and transporttemperature

-40 ºC to +70 ºC (-40 ºF to+158 ºF)

Relative humidity <95%

Note:• The specification data is measured in an anechoic

chamber, free field• The reference axis is perpendicular to the center

point of the front grille• The reference plane is perpendicular to the center of

the reference axis• The horizontal plane is perpendicular to the center of

the reference plane

CE-label

Ordering information

LBC3201/00 Line array loudspeaker, 60WLine array loudspeaker for large (reverberant) indoorenvironments, 60 W, extended listening area,aluminum extruded enclosure, EN54-24 certified, lightgray, swivel wall-mounting bracket included.Order number LBC3201/00

Accessories

LBC1259/01 Universal floorstandUniversal floor stand lightweight aluminumconstruction, foldable, M10 x 12 reducer flange.Order number LBC1259/01

7 | LBC3201/00 Line array loudspeaker, 60W

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 [email protected]

Bosch Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 GrasbrunnGermanywww.boschsecurity.com

Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]

Robert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 [email protected]

© Bosch Security Systems 2018 | Data subject to change without notice1913103243 | en, V9, 07. Jun 2018