kuhn krause PRODUCT RANGE · kuhn krause PRODUCT RANGE. Tillage and Seeding. INTRODUCING THE NEW KUHN KRAUSE PRODUCT LINE. 2011 – 2012

kuhn krausePRODUCT RANGETillage and Seeding

I N T R O D U C I N G T H E N E W K U H N K R A U S E P R O D U C T L I N E

2011 – 2012

The CompanyLocated in Hutchinson, Kansas, Krause Corporation is a 95-year-old, three-generation, family-owned tillage company. The company began when Kansas farmer Henry Krause invented the one-way plow. Since that time Krause has managed the ups and downs of the agricultural economy to become a leader in the North American tillage industry. The corporation today strives to develop the latest in tillage innovations to meet the growing agricultural technology trend and expanding global markets. In recent years, three new tillage tools have been released, each backed by the science of soil management, with the two latest being recognized by the American Society of Agricultural and Biological Engineers with awards for agricultural excellence for innovation and technology.

History1916: The year was 1916. Henry Krause built his first one-way disc plow in

a small farm shop in Western Kansas. Designed to leave more residue on the soil surface to fight wind erosion, Henry Krause’s one-way was the first conservation tillage tool! His neighbors saw the plow and were impressed with its value as a special tool for their own farming conditions and asked Henry to build more.

1920: In the early 1920’s Henry Krause’s one-way business had outgrown his Western Kansas location and he purchased the Twin Wheel Windmill factory in Hutchinson, Kansas, about 35 miles northwest of Wichita. This location and facility enabled Henry Krause to expand his one-way plow business and fill the growing needs of America’s farmers. And expand it did. During World War II Krause was given a steel allotment and continued production of one-way plows to help America’s farmers produce more efficiently. With a Krause one-way, a farmer could till as many as 100 acres/40.4 ha per day.

1947: In the years after World War II, Krause’s business grew by leaps and bounds. In 1946, over 10,000 one-ways were produced and sold. 1947 saw this number increase to 15,000 plows. It was calculated that in 1947 Krause one-ways tilled over 19 million acres/7.6 million ha and helped produce 380 million bushels of wheat.

1997: From that humble beginning in a small farm shop in Meade County, Kansas, Krause Corporation has grown into one of the world’s top manufacturers of tillage equipment and grain drills. In 1988, Fortune Magazine listed Krause tillage equipment as among the 100 products that America makes best. Krause’s modern production facility in Hutchinson, Kansas, covers 40 acres/16 ha with over 400,000 sq. ft./37,000m2 of manufacturing space under roof. Krause Corporation, still under close family ownership, produces the largest selection of farm tillage equipment and grain drills of any short-line manufacturer in the world. Krause products include: disc harrows, field cultivators, chisel plows, disc/coulter chisels, Landsman and Landstar one-pass finishers, no-till and minimum-till grain drills, and soil packers. In 1996, Krause celebrated its 80th year of manufacturing.

2000: Krause Corporation products are well recognized as the finest quality available. Krause Corporation continues to lead the industry with innovative products that respond to the needs of today’s modern agricultural producer. Krauses’ commitment is to provide our customers with the best equipment and service in the business.

2004: Successful introduction of the Dominator, a primary tillage tool that helps farmers incorporate residue into the soil and save time, fuel and fertilizer.

2010: Introduction of the Gladiator precision tillage system, a new development for the growing strip-till market. This new machine wins an “AE50” award from the American Society of Agricultural and Biological Engineers for agricultural excellence for innovation and technology.

2011: The Excelerator vertical tillage system is introduced. This new machine also wins an “AE50” award from the American Society of Agricultural and Biological Engineers. KUHN Group acquires Krause Corporation.

The PeopleThe Krause workforce totals approximately 250 employees; including a full, self-sufficient product development and manufacturing staff and a professional management team.

Key Figures2010 Revenue: approx. 60 million dollars. Annual Production: approx. 1,500 machines.

ValuesThe company’s focus, above all, is to continue to produce quality products to serve producers better; to strive to respond to their needs with new tools and new technology to meet their growing challenges. Agronomic practices are constantly changing, and at a faster pace now than ever. With this fact at the forefront, innovation and development are keys to continually providing our customers with the best equipment and service possible.

Manufacturing FacilitiesThe Krause facility is located in Hutchinson, Kansas. The total site consists of 40 acres/16 ha, with a total of 400,000 sq. ft./37,000m2 of covered area. The covered area includes two production facilities and one administration building, with ample room for future expansion if needed.

Registered trademark(s) in one or several countries.

Kuhn Krause - Hutchinson, Kansas

DOMINATORCombination Primary Tillage149 kW / 200 hp – 317 kW / 425 hp

Model Specifications 4850–12 4850–15 4850–18 4850–21

Working width (m/ft) 3.2 / 10'6" 4.1 / 13'6" 5.0 / 16'6" 5.9 / 19'6"

Number of 25" coulters 15 19 23 27

Number of shanks 7 9 11 13

Shank spacing (cm/in) 45.7 / 18"

Transport width (m/ft) 4.2 / 13'10" 4.8 / 15'9" 4.5 / 14'10" 4.5 / 14'10"

Transport height (m/ft) 1.9 / 6'6" 1.9 / 6'6" 3.7 / 12'3" 4.1 / 13'5"

Weight (kg/lbs) 5361 / 11,821 6470 / 14,266 8857 / 19,528 9626 / 21,223

Working depth (min/max) (cm/in) 20.3 – 40.6 / 8" – 16"

Tractor power range (kW/hp pto) 149 – 186 / 200 – 250 186 – 242 / 250 – 325 238 – 253 / 319 – 340 253 – 317 / 340 – 425

Recommended speed of operation (km/h / mph) 6 – 12 / 4 – 7

Rigid frame (12 and 15) – folding frame (18 and 21) – single point hydraulic depth control – hydraulic 22" coulters – combination shanks with wear bars – winged points – unique offset disc conditioner – LED lights – 24/7® Conditioning Reel or rear hitch, Guardian Hitch®

The Dominator combination primary tillage machine sets new standards for residue management, compaction removal and mixing of residue in one pass. This leads to faster decomposition of tough crop residue, improved crop root development and increased yields, while decreasing operational costs.

Heavy-duty, rigid frame with easy-to-set, single-point hydraulic depth control Excellent cutting with large hydraulic coulters for superior residue flow Removes soil compaction from 20 – 40 cm (8" – 16") allowing increased root development Mixes and levels soil and residue for easy seedbed preparation for planting Working width: 3.2 – 5.9 m (10'6" – 19'6")

The TL 3000 Disc Ripper manages heavy residue and removes compaction with large blades and deep-till shanks. This promotes breakdown of crop residue and allows good root development for the next crop. The robust frame provides many years of continuous operation in tough conditions.

Heavy-duty, rigid frame with easy-to-set, single-point hydraulic depth control Removes soil compaction from 20 – 40 cm (8" – 16") allowing increased root development Mixes and levels soil and residue for easy seedbed preparation for planting Working width: 3.8 – 5.3 m (12'6" – 17'6")

Model Specifications TL 3000–5R TL 3000–7R

Working width (m/ft) 3.8 / 12'6" 5.3 / 17'6"

Number of 24" discs 28 40

Number of shanks 5 7

Shank spacing (cm/in) 76 / 30"

Transport width (m/ft) 4.6 / 15' 6.2 / 20'4"

Transport height (m/ft) 1.9 / 6'6" 1.9 / 6'6"

Weight (kg/lbs) 5613 / 12,375 7601 / 16,757

Working depth (min/max) (cm/in) 20.3 – 40.6 / 8"–16"

Tractor power range (kW/hp pto) 149 – 186 / 200 – 250 206 – 253 / 276 – 340

Recommended speed of operation (km/h/mph) 6 – 12 / 4 – 7

Rigid Frame – single point hydraulic depth control – mechanical or hydraulic adjust disc gangs – deep-till shanks – winged points – LED lights – Guardian Hitch

TL 3000 DISC RIPPER149 kW/200 hp to 253 kW/340 hp

4830 IN-LINE RIPPER112 kW / 150 hp – 268 kW / 360 hp

The durable 4830 In-Line Ripper provides efficient compaction removal, while allowing crop residue to remain undisturbed on the surface. This allows for good root development and water infiltration into the soil, in areas requiring increased surface residue or no-till farming.

Primary tillage with minimal disturbance of residue and soil surface Removes soil compaction from 20 – 40 cm (8" – 16") allowing increased root development 3-Point or Pull-Type configuration Working width: 3.8 – 6.8 m (12'6" – 22'6")

Model Specifications 4830–5R 4830–6R 4830–7R 4830–7F 4830–8F 4830–9F

Working width (m/ft) 3.8 / 12'6" 4.6 / 15' 5.3 / 17'6" 5.3 / 17'6" 6.1 / 20' 6.8 / 22'6"

Frame type Rigid Folding

Number of shanks and coulters 5 6 7 7 8 9

Coulter size (cm/in) 55.8 / 22"

Shank spacing (cm/in) 76 / 30"

Transport width (m/ft) 3.4 / 11'1" 4.3 / 14'3" 4.9 / 15'11" 3.5 / 11'5" 3.5 / 11'5" 4.4 / 14'5"

Weight (kg/lbs) 1660 / 3660 2031 / 4479 2271 / 5008 2433 / 5364 2750 / 6063 3151 / 6947


Tractor power range (kW/hp pto) 112 – 149 /150 – 200

134 – 179 /180 – 240

157 – 209 /210 – 280

157 – 209 /210 – 280

179 – 239 /240 – 320

201 – 268 /270 – 360


Primary tillage with minimal residue and surface disturbance – double-bar frame – spring-reset shank mounts, no-till shanks with wear bars – pivoting, individual coulters – LED lights - optional no-till closing wheel attachment, pull-hitch

8100 DISC HARROWClass I - Seedbed Finishing46 kW / 62 hp – 108 kW / 145 hp

Class I Disc Harrows deliver excellent residue cutting and seedbed preparation to ensure the proper placement of seeds. These discs provide good weight-to-blade ratio to ensure consistent operation in a variety of soil conditions.

Heavy-duty, rigid frame with easy-to-set, single-point hydraulic depth control Residue Razor disc blades for superior residue cutting and soil penetration Rock-Flex bearing arms for protection from stony conditions or hard soil conditions Working width: 3.7 – 5.5 m (12'3" – 18'1")

8200 DISC HARROWClass II - All-Purpose98 kW / 132 hp – 258 kW / 347 hp

Class II Disc Harrows provide all-purpose operation in a variety of soil and residue conditions. Residue Razor disc blades with approximately 200 lbs (90 kg) per-blade offer consistent residue cutting and soil penetration in a variety of conditions. A wide range of widths are available for a variety of tractor power requirements, and Quad-Fold sizes provide exceptional transport dimensions.

Heavy crop residue management Residue Razor disc blades for superior residue cutting and soil penetration Rock-Flex bearing arms for protection from stony conditions or hard soil conditions Working width: 6 – 11.7 m (19'9" – 38'6")

Model Specifications 8200–19W 8200–22W 8200–25W 8200–28W 8200–31W 8200–34W 8200–36W 8200–36WQF 8200–38WQFWorking width (m/ft) 6 / 19'9" 6.8 / 22'7" 7.7 / 25'6" 8.6 / 28'5" 9.5 / 31'4" 10.4 / 34'2" 10.8 / 35'8" 10.8 / 35'8" 11.7 / 38'6"Disc diameter (cm/in) 60.9 / 24"Number of discs 54 62 70 78 86 94 98 98 106Disc spacing (cm/in) 23.1 / 9.125"Number of bearings arms 18 22 22 22 26 26 26 30 32Transport width* (m/ft) 3.7 / 12'2" 3.7 / 12'2" 4.1 / 13'7" 5.1 / 16'9" 5.1 / 16'9" 5.1 / 16'9" 5.1 / 16'9" 5.3 / 17'5" 5.3 / 17'5"Transport height* (m/ft) 3.2 / 10'8" 3.6 / 11'10" 3.6 / 11'11" 3.8 / 12'6" 4.1 / 13'6" 4.5 / 14'9" 4.7 / 15'6" 4.1 / 13'5" 4.1 / 13'5"

Weight (kg/lbs) 4913 /10,832

5643 /12,415

6377 /14,060

7390 /16,294

8115 /17,891

8391 /18,499

8790 /19,379

10,169 /22,420

10,467 /23,077

Max. working depth (cm/in) 15.2 / 6"


118 – 152 /158 – 203

133 – 171 /179 – 230

148 – 191 /199 – 256

164 – 210 /219 – 282

178 – 229 /239 – 308

186 – 239 /250 – 321

186 – 239 /250 – 321

201 – 258 /270 – 347


* May vary with harrow attachment.

Folding frame – single point hydraulic depth control – Rock-Flex bearing arms – Residue Razor disc blades – aggressive 20° front gang angle – adjustable dual scrapers at bearing arms - walking tandem wheels – LED lights – optional 24/7 harrow attachments or rear hitch – innovative Quad-Fold system on the two largest sizes – optional Guardian Hitch

Model Specifications 8100–12W 8100–14W 8100–15W 8100–18W

Working width (m/ft) 3.7 / 12'3" 4.2 / 13'9" 4.6 / 15'3" 5.5 / 18'1"Disc diameter (cm/in) 55.8 / 22"Number of discs 34 38 42 50Disc spacing (cm/in) 23.1 / 9.125"Number of bearings arms 8 8 12 12Transport width* (m/ft) 4.2 / 13'11" 4.6 / 15'4" 5.1 / 16'10" 6 / 19'8"Weight (kg/lbs) 1974 / 4343 2093 / 4604 2288 / 5033 2499 / 5499Max. working depth (cm/in) 12.7 / 5"Tractor power range (kW/hp pto) 46 – 73 / 61 – 98 51 – 82 / 69 – 110 57 – 91 / 76–122 67 – 108 / 90 – 145Recommended speed of operation (km/h / mph) 6 – 10 / 4 – 6* May vary with harrow attachment.

Rigid frame – mechanical depth control – Rock-Flex bearing arms – 55.8 cm (22") Residue Razor disc blades – adjustable gang angle (front 15° – 21° / rear 12° – 18°) – dual wheels – built-in rear hitch – LED lights – optional tine harrow

8300 DISC HARROWClass III - Primary Tillage118 kW / 159 hp – 278 kW / 373 hp

DISC COMPONENTS - A STORY OF STRENGTH

Class III Disc Harrows provide primary tillage operation where maximum soil penetration and residue mixing is required. Residue Razor disc blades with approximately 245 lbs (110 kg) per blade offer consistent residue cutting and soil penetration in a variety of conditions. A wide range of widths are available for a variety of tractor power requirements, and Quad-Fold sizes provide exceptional transport dimensions.

Kuhn Krause is proud to offer Residue Razor Disc Blades from Ingersoll as the standard sharp blade option for all disc harrows. This blade has an exceptionally sharp edge, 5 times sharper than conventional blades, for:

Kuhn Krause heavy ductile cast spools multiply the strength of the disc gang, making it the strongest in the industry. Kuhn Krause spools are machined for an exact fit on the tie rod and precision faced to perfectly match the surface of the disc blade. A larger bell on the convex end and a smaller bell on the concave end provides an overlap fit against the Residue Razor blades. This design supports the disc blade more positively without creating a "stress line" like competitive designs.

Rock-Flex bearing arms flex over the toughest obstacles. Kuhn Krause's exacting manufacturing process for Rock-Flex arms includes heat treating for durability and shot peening to relieve stress. Lubrication access to the SuperSeal gang bearings is through the protection of the Rock-Flex standard itself.

Kuhn Krause SuperSeal regreasable gang bearings are very tough and durable. First they're protected in a ductile cast iron holder and encased in a heavy rubber boot to absorb shock. The triple lip seal has an extra heavy outer lip to resist wear and keep dirt out. The grease fitting is aligned directly with the lube hole in the bearing for positive greasing directly into the cartridge.

Heavy crop residue management Residue Razor disc blades for superior residue cutting and soil penetration Rock-Flex bearing arms for protection from stony conditions or hard soil conditions Working width: 6 – 11.3 m (19'10" – 37'3")

Improved residue cutting Increased soil penetration Continued blade strength and durability

Model Specifications 8300–19W 8300–22W 8300–25W 8300–28W 8300–31W 8300–34W 8300–37WQFWorking width (m/ft) 6.0 / 19'10" 6.9 / 22'11" 7.5 / 24'7" 8.5 / 27'9" 9.4 / 30'11" 10.4 / 34'1" 11.3 / 37'3"Disc diameter (cm/in) 66/26"Number of discs 50 58 62 68 76 84 92Disc spacing (cm/in) 25.4/10"Number of bearings arms 16 18 20 20 22 24 28Transport width* (m/ft) 3.7 / 12'2" 3.7 / 12'2" 4.3 / 14'1" 5.2 / 17' 5.2 / 17' 5.2 / 17' 5.4 / 17'7"Transport height* (m/ft) 3.2 / 10'9" 3.7 / 12'2" 3.6 / 11'11" 4.0 / 13' 4.2 / 13'10" 4.4 / 14'8" 4.1 / 13'5"

Weight (kg/lbs) 5488 /12,101

6366 /14,036

6805 /15,004

7831 /17,265

8360 /18,432

9273 /20,,445

11,146 /24573

Max. working depth (cm/in) 20.3 / 8"


137 – 171 /183 – 229

147 – 183 /197 – 246

166 – 207 /222 – 278

184 – 231 /247 – 309

203 – 254 /273 – 341

222 – 278 /298 – 373


* May vary with harrow attachment.

Folding frame – single-point hydraulic depth control – Rock-Flex bearing arms – Residue Razor disc blades – aggressive 22° front gang angle – adjustable dual scrapers at bearing arms – walking tandem wheels – LED lights – optional 24/7 harrow attachments or rear hitch – innovative Quad-Fold system on largest size – optional Guardian Hitch

TL 6200 LANDSMANCombination Soil Finisher94 kW / 126 hp – 302 kW / 405 hp

TL 6200 Landsman delivers excellent residue flow handling capability, soil mixing, conditioning and leveling in one pass. Shallow concavity 20" Residue Razor blades size residue uniformly and minimize lateral soil movement to mix soil and residue without creating ridges.

Shallow concavity Residue Razor disc blades cut residue and begin mixing soil Spring shanks on a deep frame allow exceptional residue flow through the machine Variety of harrow options for superior seedbed leveling and preparation Working width: 3-section, single fold – 5.5 – 9.7 m (18' – 31'6") 5-section, double fold - 11 – 13.8 m (36' – 45')

Model Specifications 3-Section, Single-Fold Models 5-Section, Double-Fold Models

Working width (m/ft) 5.5 – 9.7 / 18' – 31'6" 11 – 13.8 / 36' – 45'

Number of discs 24 – 40 46 – 62

Number of shanks 25 – 53 49 – 77


Transport width (m/ft) 3.7 or 4.6 / 12' or 14'1" (depending on model) 4.6 / 14'1"

Transport height (m/ft) 2.9 – 4.5 / 9'6" – 14'6" 3.5 or 4.2 / 11'6" or 13'6"

Weight (kg/lbs) 6976 / 15,379 9719 / 21,426




Seedbed preparation, residue cutting and soil mixing – deep frame for exceptional residue flow – single-point hydraulic depth control – mechanical or hydraulic adjust 20" discs cut residue and begin mixing soil – spring shanks provide uniform seedbed tillage – variety of 24/7 harrow options – walking tandem wheels – LED lights – optional Guardian Hitch

TL 6400 LANDSTARCombination Soil Finisher94 kW / 126 hp – 242 kW / 324 hp

TL 6400 Landstar delivers excellent residue flow handling capability, soil mixing, conditioning and leveling in one pass. Shallow concavity 20" Residue Razor blades size residue uniformly and minimize lateral soil movement to mix soil and residue without creating ridges. Exclusive Star Wheels on TL 6400 Landstar models cut clods, level ridges and evently distribute residue.

Shallow concavity Residue Razor disc blades cut residue and begin mixing soil Exclusive Star Wheel Variety of harrow options for superior seed bed leveling and preparation Spring shanks on a deep frame allow exceptional residue flow through the machine Working width: 3-section, single fold – 5.5 – 9.7 m (18' – 31'6") 5-section, double fold – 11 m (36')


Working width (m/ft) 5.5 – 9.7 / 18' – 31'6" 11 / 36'

Number of discs 24 – 40 46

Number of shanks 25 – 43 49


Transport width (m/ft) 3.7 or 4.6 / 12' or 14'1" (depending on model) 4.60 / 14'1"

Transport height (m/ft) 2.9 – 4.5 / 9'6'' – 14'6" 3.50 / 11'6"

Weight (kg/lbs) 7564 / 16,676 9040 / 19,930




Seedbed preparation, residue cutting and soil mixing – deep frame for exceptional residue flow – single-point hydraulic depth control – mechanical or hydraulic adjust 20" discs cut residue and begin mixing soil – spring shanks provide uniform seedbed tillage – exclusive Star Wheel – variety of 24/7 harrow options – walking tandem wheels – LED lights – optional Guardian Hitch

5635 FIELD CULTIVATOR91 kW / 123 hp – 301 kW / 404 hp

The 5635 Field Cultivator provides increased residue flow between the five rows of shanks for high residue conditions. Uniform cultivation with the split-the-middle sweep pattern leads to better seed-to-soil contact. The exclusive floating hitch and mechanical depth adjustment allow for consistent tillage depth resulting in even germination and uniform emergence.

Shanks on a split-the-middle pattern for full-width seed bed preparation Unique frame construction offers strength while remaining flexible Exclusive floating hitch option and mechanical depth adjustment for superior depth control Working width: 3-section, single fold - 6.2 – 11.1 m (20'6" – 36'6") 5-section, double fold - 12 – 15.3 m (39'6" – 50'6")


Working width (m/ft) 6.2 – 11.1 / 20'6" – 36'6" 12 – 15.3 / 39'6" – 50'6"

Number of shanks 17 – 29 31 – 37


Transport width (m/ft) 4 or 4.6 / 13'3" or 15'3" 4.8 / 15'9"

Transport height (m/ft) 2.9 – 4.5 / 9'8" – 14'8'' 4.1 or 4.9 / 13'7" or 16'4"

Weight (kg/lbs) 4026 – 5875 / 8877 – 12,954 6777 – 7652 / 14,942 – 16,871




Seedbed preparation and soil mixing – shanks on a split-the-middle pattern – unique frame construction offers strength while remaining flexible – 139" frame with spring shanks no closer than 31" – mechanical depth control on each frame section – variety of 24/7 harrow options – walking tandem wheels – optional, exclusive floating hitch design – excellent field contouring capability – LED lights – optional Guardian Hitch on larger sizes

5200 CONVENTIONAL AND MINIMUM-TILL GRAIN DRILL134 kW / 180 hp – 161 kW / 216 hp

5200 Grain Drills deliver excellent seed placement for conventional or minimum-till conditions. Folding capabilities offer excellent transport dimensions, and the large capacities for seed and fertilizer provide efficient operation. The PRO Openers deliver seed and fertilizer at precise depth to ensure uniformity in seed-to-soil contact and proper emergence.

Model Specifications 5200–30 5200–36

Working width (m/ft) 9.1 / 30' 11.0 / 36'Row spacing (cm/in) 15 / 6"Number of openers 60 72Opener diameter (cm/in) 34.3 / 13.5"Transport width (m/ft) 3.9 / 12' 10"Max. hopper capacity (l/bu) 3383 / 96 4052 / 115Seed/fertilizer capacity 60% / 40%Weight (kg/lbs) 6663 / 14,690 7627 / 16,814Tractor power range (kW/hp pto) 134 / 180 161 / 216Recommended speed of operation (km/h / mph) 8 – 12 / 5 – 7

Folding frame – drawbar hitch with hydraulic tongue – walking tandem mainframe wheels – Precision Residue Opener – rotary scrapers – front-mounted transmission drive system – easily adjustable seed cups – digital acre meter – treadwalk - LED lights – narrow opener spacing, dry fertilizer meter and drive, press wheels, row markers

Seeding capability for conventional or minimum-till field conditions Front mounted transmission drive with easily adjustable seed cups Stainless steel tank floor and fertilizer cups made from non corrosive material provides years of trouble-free operation Working width: 9.1 – 11 m (30' – 36')

5200NT NO-TILL GRAIN DRILL89 kW / 120 hp – 149 kW / 200 hp

5200NT No-Till Grain Drills deliver excellent seed placement for heavy residue conditions. The front coulters, through the use of hydraulic leverage from the tractor, provide indexed residue cutting for the PRO Openers. These openers deliver seed and fertilizer at precise depth to ensure uniformity in seed-to-soil contact and proper emergence.

Model Specifications 5200NT–15 5200NT–20

Working width (m/ft) 4.5 / 15' 6 / 20'Row spacing (cm/in) 19 / 7.5"Number of openers 24 32Opener diameter (cm/in) 34.3 / 13.5"Transport width (m/ft) 4.8 / 16' 6.4 / 21'Max. hopper capacity (l/bu) 1691 / 48 2255 / 64Seed/fertilizer capacity 60% / 40%Weight (kg/lbs) 4122 / 9088 5100 / 11,243Tractor power range (kW/hp pto) 89 – 112 / 120 – 150 119 – 149 / 160 – 200Recommended speed of operation (km/h / mph) 8 – 12 / 5 – 7

Pull-type rigid frame – hydraulic weight transfer tongue – dual wheels – fluted, no-till coulters indexed to openers – Precision Residue Opener – rotary scrapers – front mounted transmission drive system – easily adjustable seed cups – digital acre meter – treadwalk - LED lights – dry fertilizer meter and drive, press wheels, row markers

Rugged frame design that integrates the no-till coulter bar for superior residue cutting and overall strength Front-mounted transmission drive with easily adjustable seed cups Stainless steel tank floor and fertilizer cups made from non-corrosive material provides years of trouble-free operation Working Width: 4.5 – 6.0 m (15' – 20')

Kuhn North America, Inc.Corporate Headquarters - 1501 West Seventh Avenue

Brodhead, WI 53520 - Phone: (608) 897-2131 - Fax: (608) 897-2561www.KuhnNorthAmerica.com

Kuhn Krause, Inc.305 South Monroe Street

Hutchinson, KS 67501 - Phone: (620) 663-6161 - Fax: (620) 622-5903www.KuhnKrause.com

KUHN DO BRAZIL Passo Fundo (Brazil)

KUHN KRAUSE Hutchinson, KS (U.S.A.)

KUHN NORTH AMERICABrodhead, WI (U.S.A.)

KUHN HUARDChâteaubriant (France)

KUHN BLANCHARDChéméré (France)

KUHN-AUDUREAULa opechagnière (France)

KUHN SASaverne (France)

KUHN GELDROPGeldrop (Netherlands)

KUHN extends its Tillage and Seeding offering with a broad range of machines that have wide working widths and high horsepower capabilities. KUHN Group reinforces itself with a highly-qualified development and

production facility for large-width tillage and seeding tools and becomes a leader in this field.KUHN Group strengthens its market position in the very important crop production segment with the addition of a new product range that perfectly complements existing tillage lines and helps to diversify the Company’s offering in North America and other areas where

these large-width, high-horsepower machines are in demand.

KUHN Group reinforces its long-term growth potential, gaining access to new technology, new resources and new market opportunities.

KUHN HUARDChâteaubriant (France)

» Plowing» Non PTO-Driven Tillage Tools» Precision Seeding» Min-Till or No-Till Seed Drills

KUHN BLANCHARDChéméré (France)

» Spraying

KUHN GELDROPGeldrop (Netherlands)

» Baling and Wrapping

KUHN DO BRAZILPasso Fundo (Brazil)

» Min-Till and No-Till Seed Drills

KUHN KRAUSEHutchinson, KS (U.S.A.)

» Tillage and Seeding

KUHN AUDUREAULa Copechagnière (France)

» Bedding and Feeding

KUHN NORTH AMERICABrodhead, WI (U.S.A.)» Bedding and Feeding» Manure Spreading» Hay and Forage Harvesting

KUHN SASaverne (France)

» Hay and Forage Harvesting» PTO-Driven Tillage Tools» Conventional Seed Drills

Prin

ted

in U

SA 7

0637

8US

1011

Cop

yrig

ht 2

011

Kuhn

Nor

th A

mer

ica,

Inc.

Documents

kuhn krause PRODUCT RANGE · kuhn krause PRODUCT RANGE. Tillage and Seeding. INTRODUCING THE NEW KUHN KRAUSE PRODUCT LINE. 2011 – 2012