Embed Size (px)
Citation preview
Black phosphate self-tapping screws with countersunk phillips heads, for fixing plasterboards to metalframing. The fasteners are for use on steel thickness between 0.7 mm to 2.0 mm.The screws are tested and they comply to ASTM C1002 - 07.
Knauf Self Tapping ScrewsTB 25 / 35 / 45 / 55 / 65 mm
Technical Datasheet 03- 2017
Please contact our sales department for inquiries about storage and packing.
Note:
Knauf Self Tapping Screws TB 25 / 35 / 45 / 55 / 65 mm
Black phosphate self-tapping screws with countersunk phillips heads, for fixing plasterboards to metalframing. The fasteners are for use on steel thickness between 0.7 mm to 2.0 mm.The screws are tested and they comply to ASTM C1002 - 07.
Self Tapping Screw TB 3.5 x 25 mmSelf Tapping Screw TB 3.5 x 35 mmSelf Tapping Screw TB 3.5 x 45 mmSelf Tapping Screw TB 3.5 x 55 mmSelf Tapping Screw TB 3.5 x 65 mm
25 mm35 mm45 mm55 mm65 mm
8 mm8 mm8 mm8 mm8 mm
Complies to ASTM C 1002 - 98Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07
1000 pcs/pack1000 pcs/pack1000 pcs/pack1000 pcs/pack1000 pcs/pack
Description Length Complying StandardScrew HeadDiameter
PackagingUnit
Product Description
Technical Data
Please contact our sales department for inquiries about storage and packing.
Note:
Knauf Self Tapping Screws TB 25 / 35 / 45 / 55 / 65 mm
Black phosphate self-tapping screws with countersunk phillips heads, for fixing plasterboards to metalframing. The fasteners are for use on steel thickness between 0.7 mm to 2.0 mm.The screws are tested and they comply to ASTM C1002 - 07.
Self Tapping Screw TB 3.5 x 25 mmSelf Tapping Screw TB 3.5 x 35 mmSelf Tapping Screw TB 3.5 x 45 mmSelf Tapping Screw TB 3.5 x 55 mmSelf Tapping Screw TB 3.5 x 65 mm
25 mm35 mm45 mm55 mm65 mm
8 mm8 mm8 mm8 mm8 mm
Complies to ASTM C 1002 - 98Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07Complies to ASTM C 1002 - 07
1000 pcs/pack1000 pcs/pack1000 pcs/pack1000 pcs/pack1000 pcs/pack
Description Length Complying StandardScrew HeadDiameter
PackagingUnit
Product Description
Technical Data
Knauf Head Office
The constructional and structural properties, and characteristic building physics Knauf system can solely be ensured with the exclusive use of Knauf system components, or other product expressly recommended by Knauf.
Knauf Manufacturing PlantKnauf Qatar Office
www. .ae
P.O.Box 27111Doha, State of QatarTel: +974 44528191Fax: +974 44528181
Phone: +971 4 337 7170
Fax: +971 4 334 9659
P.O. Box: 112871, Dubai
[email protected] information provided in this leaflet is only intended to give guidance in selecting and using Knauf products. While we make every effort to ensure its accuracy, neither Knauf LLC and its branchesnor any of this employees or affiliates warrant or assume any legal liability or responsibility for the completeness or usefullness of any failure in installation or constructing structure installation or builidingor caused by using this leaflet. Readers are adviced to independently verify this information prior to reply on it. In particular, readers must obtain appropriate independent advice on the use of products in specific structures, installations or buildings to ensure compliance with all regulations, in cluding health and safety regulations. Knauf reserves the right to amend technical specification without notice.
P.O.Box 50006Ras Al Khaimah, U.A.E.Tel: +971 7 221 5300Fax: +971 7 221 5301
Made in UAE
