KIRAN AG 701 - Kiran Udyogkiranudyog.com/wp-content/uploads/2018/02/kiran-sleeving.pdfKIRAN NMG 601 NYLON MONOFILAMENT EXPANDABLE SLEEVING NYLON Monofilament Expandable Sleeving is

KIRAN AG – 701

ACRYLIC RESIN COATED FIBERGLASS SLEEVING

UL recognized component under UL File No. # E491961, Acrylic Coated Fiberglass Braided Sleeving are

precisely engineered sleeving with high Dielectric Strength capabilities. The product available in different grades

with varying Dielectric Strength upto 7000 Volts as per applications, consisting an inner wall layer made out of

Fiberglass Yarn that is Braided and Coated with Acrylic Resin. KIRAN Acrylic - F sleeving is recommended as a

universal coated sleeving for all thermal requirements from -30°C through 155°C. The sleeving is compatible with

most insulating varnishes and is capable of short-thermo operation above its thermal classification.

These Sleevings in nature are extremely flexible and very easy to use. They are used in electric equipments such as

Generators, Transformers, Electric Motors, Lightening, Home Appliances, Circuits and Control of various

instruments, Breaker Panels, Switches and Welding Equipments.

FEATURES :

Highly craze resistant. Withstands severe bending with no loss of dielectric properties.

Coating film will not flow upon application of heat.

Extremely tough and flexible. Able to withstand assembly handling, cut-through and mechanical stress.

Resistant to most acids and most organic solvents.

UNIQUE PROPERTIES :

Superior Electrical Properties.

Excellent Low Temperature Flexibility.

Chemical Resistance.

Extreme Abrasion Resistance.

Oil Resistance.

Longer Shelf Life.

TYPICAL APPLICATION :

Two & Four Wheeler Wiring Harness.

Alternator Core Winding.

Oil Filled Transformers Lead Wire Protection.

Relays, Radio Circuits.

Motor and Generator Lead Wire Protection.

www.kiranudyog.com

Parameters Details

Thermal Class “F” Class

Thermal Temp. -30° C to +155° C

Inner Diameter 0.5mm to 40.0mm

Color Available in different colors on request

Grade

&

Dielectric Strength

A - 7000 Volts

B – 4000 Volts

C – 2500 Volts

C1 – 1500 Volts

Length Continuous or Customized cut lengths

available on request.

MANUFACTURING STANDARD

PRODUCT COMPLIANCE

http://www.kiranudyog.com/

KIRAN AG – 701

IV. TECHNICAL CHARACTERISTICS :

SL. No. Property Test Result

1. Heat Resistance Bending after heating IEC 60684 part

2 Clause 13,

48hrs at +155°C

No Cracking or detachment of coating shall

be visible and the original colors shall be

clearly recognized.

1.a UL 1441 – 60days at +190°C Dielectric Strength after ageing : average

break down voltage 5000Volts

2. Flammability Flame Propagation :

IEC 60684 part 2 Clause 26

Method A

Vertical with Mandrel

Self Extinguish (within 60 Sec.)

2.a UL 1441 Vertical with Mandrel Passes

3. Cold Resistance Bending at Low temperature

IEC 60684 part 2 clause 14 at -70°C


be visible

3.a UL 1441 -1Hr at -10°C No Cracking

4. Chemical Resistance Simulation of real operating

conditions

Compatible with most insulating varnishes.

5. Insulation

Resistance

At room Temp. as per IEC 60684 Min. 103 MΩ

V. DIMENSIONS as per IEC 60684 :

Part No. Nominal Bore

(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

1 AG701 AWG # 18 1 ± 0.20 0.25 100

2 AG701 AWG # 12 2 ± 0.20 0.25 100

3 AG701 AWG # 09 3 ± 0.40 0.35 100

4 AG701 AWG # 06 4 ± 0.40 0.5 100

5 AG701 AWG # 04 5 ± 0.50 0.5 100

6 AG701 AWG # 03 6 ± 0.50 0.5 100

7 AG701 AWG # 01 7 ± 0.50 0.5 100

8 AG701 AWG # 00 8 ± 0.50 0.5 100

9 AG701 AWG # 1/0 9 ± 0.50 0.5 100

10 AG701 AWG # 2/0 10 ± 0.50 0.65 100

12 AG701 AWG # 3/0 12 ± 0.50 0.65 50

14 AG701 AWG # 250 14 ± 0.50 0.65 50

16 AG701 AWG # 300 16 ± 1.00 0.65 50

18 AG701 AWG # 400 18 ± 1.00 0.65 50

20 AG701 AWG # 500 20 ± 1.00 0.65 50

22 AG701 AWG # 600 22 ± 1.00 0.65 25

25 AG701 AWG # 750 25 ± 1.00 0.65 25

** Other diameters supplied upon request.

www.kiranudyog.com


KIRAN KFC/KFH 001/NMG 601 IEEMA UL File No. # E318161

FIBERGLASS CORD-KFC 001

Fiberglass braided Cords are intended for high-temperature applications up to 550ºC. The Cord consists of fiberglass

yarn core with a fiberglass braided jacket to form an exact diameter for controlled compression seals. Larger diameters

have a "Braid-Over-Braid" or “Yarn- Filled -Braid” jacket for durability and precise gasket dimensions.

Cords are available in many sizes and manufactured to fit Customer Specifications for Roundness and Softness.

These Cords are suitable for all types of sealing applications where High Temperatures upto 550ºC are needed.

Cords are the best choice for new or alternative gaskets for boilers, fireproof safe applications, flanges, furnaces, gas

fireplaces, glass manufacturing, ovens, pipe wraps, thermal insulation.

1. Thermal Class : “E” Glass

2. Thermal Temperature : +550° C

3. Outer Diameter : 1.0mm to 40mm

4. Color : White

5. Length : 25, 50, 100, 500 Meters and As per Customer Request

6. Type : Glass Filled Type and Braided Type

7. Features :a. Free of environmentally contaminating and hazardous chemicals.

b. Extremely flexible.

c. Able to withstand assembly handling, cut-through and mechanical stress.

8. Unique Properties :

i..Extremely Soft and Flexible

ii. Good Mechanical Protection.

iii. Oil Resistant.

iv. Very High Tensile Strength

9. Typical Application :

i. Motor and Generator Core Binding

ii. Transformer Core Binding

iii. Traction Motor Core Binding (Railways)

iv. Wind Generators Core Binding.

www.kiranudyog.com


FIBERGLASS FLAT HOSE- KFH 001

Fiberglass Braids are made from high temperature fiberglass yarn with low thermal conductivity. The rope and braid

are designed as gasket or seal for various industrial applications.



3. Inner Diameter : 1.0mm to 40mm

4. Color : White

5. Length : 25, 50 and 100 Meters

6. Type : Braided Type

7. Features : a. Free of environmentally contaminating and hazardous chemicals.

b. Extremely flexible.

c. Able to withstand assembly handling, cut-through and mechanical stress.


i. Very Flexible.

ii. Good Mechanical Protection.

iii. Oil Resistance.

iv. Extreme Soft Material.


i. Wind Generator Core Cover.

www.kiranudyog.com


KIRAN NMG 601

NYLON MONOFILAMENT EXPANDABLE SLEEVING

NYLON Monofilament Expandable Sleeving is commonly used in the automotive industry to protect wires and hoses

from excessive Wear. Vibration and Abrasion can tear automotive hoses to pieces, but Nylon can increase hose life up

to 300%. This lengthened lifespan is recognized in terms of reduced maintenance and downtime leading to greater

customer satisfaction.

NYLON Monofilament Expandable Sleeving is braided from 0.012" Nylon 6-6 polyamide monofilament. The tight

braid construction fully covers and provides excellent surface abrasion resistance for assemblies exposed to excessive

wear. The smooth Nylon fibers and tight construction also reduces abrasion damage caused by hoses and harnesses

rubbing against the inside wall of the sleeving.

1. Thermal Class : “F” Class

2. Thermal Temperature : -70° C to +150° C

3. Inner Diameter : 1 mm to 40 mm

4. Color : Black, Grey

6. Length : Continuous or customized cut length on request

7. Type : Nylon 6.6

8. Expandability :1:2

9. Features :a. Adaptable & Suitable for all weather conditions.

b. Open weave construction allows expansion above or below original diameter.

10. Unique Properties:

i. Lightweight and flexible for ultimate protection.

ii. Sleeving expands up to 200% to fit over most connectors.

iii. Resists automotive fluids to keep engines safe.

iv. Cut & abrasion resistant to protect hoses from excessive wear.

v. UV resistant for outdoor usage.

11. Typical Application:

i. Aerospace

ii. Automobile Industry

iii. Computer Cable Management

iv. Satellite, Robotics

v. Audio Visual, Home Entertainment Wiring Protection

www.kiranudyog.com


KIRAN KFT 001/002

FIBERGLASS NON ADHESVIE TAPE-KFT 001

Fiberglass Tapes are narrow woven fabric made of Non-alkali E-glass fibers with a strong selvage edge. This prevents

fraying and unraveling of fabric at the edges. The narrow widths eliminate the cutting of wider fiberglass fabrics down

to size and increases accuracy and productivity. The tightly woven tapes offer more uniformity and are highly drapable.



3. Width : 1/4 Inch to 6 Inch

4. Thickness : As per Customer Request

4. Color : White

5. Length : 50, 100, 500 Meters or as per Customer Request

6. Type : Plain Weave and Twill Weave upon Customer Request


b. Able to withstand assembly handling, cut-through and mechanical stress.


i. High Dimensional Stability.

ii. High Tensile Strength

iii. Oil Resistant.

iv. Extreme Soft Material.

v. Excellent Flexibility and Reinforcing Quality.



ii. Transformer Core Binding

iii. Traction Motor Core Binding

iv. Wind Generators Core Binding

v. Used in Boilers, Furnaces and Ovens for sealing.

MANUFACTURING STANDARD COMPLIANCES

www.kiranudyog.com

QUALITY CERTIFICATIONS PRODUCT COMPLIANCES


POLYESTER NON ADHESIVE TAPES- KFT002

Polyester Non Adhesive Tapes are manufactured from Polyester yarn. These Polyester woven tapes will not burn or

smoulder and retain as much as 25% of its tensile strength at 1550 C.

They exhibit a high strength-to-weight ratio while maintaining excellent flexibility.

1. Thermal Class : “F” Glass

2. Thermal Temperature : 155° C

3. Width : 1/4 Inch to 4 Inches

4. Thickness : As per Customer Request

4. Color : White

5. Length : 50, 100, 500 Meters or as per Customer Request


b. Able to withstand assembly handling, cut-through and mechanical stress.


i. High Dimensional Stability.

ii. High Tensile Strength

iii. Oil Resistance.

iv. Excellent Flexibility and Reinforcing Quality.



ii. Traction Motor Core Binding

iii. Transformer Core Binding

iv. Wind Generators Core Binding

v. Used in Boilers, Furnaces and Ovens for sealing.

www.kiranudyog.com

QUALITY CERTIFICATIONS MANUFACTURING STANDARD COMPLIANCES


KIRAN PVG – 301

POLYURETHANE COATED FIBERGLASS SLEEVING

Fiberglass sleeving impregnated with Polyurethane varnish is used where reliable heat resistance & dielectric

strength is required. The product available in different grades with varying Dielectric Strength upto 4000 Volts as

per applications, consisting an inner wall layer made out of Fiberglass Yarn that is Braided and Coated with

Polyurethane. KIRAN PVG - 301 F Class sleeving is recommended as a universal coated sleeving for all thermal

requirements of Class 155°C. The sleeving is compatible with most insulating varnishes and is capable of short-

thermo operation above its thermal classification.

They are used in electric equipments such as Generators, Transformers, Electric Motors, Lightening, Home

Appliances, Circuits and Control of various instruments.

FEATURES :

Free of environmentally hazardous and contaminating chemicals, completely different from

conventional polyurethane coating.

Tough, highly flexible, reliable with smooth finish.

Excellent compatibility with Class F impregnating resins and varnishes.

Solvent free.

UNIQUE PROPERTIES :

Incombustible in Nature.

Good Compatibility with Class F Impregnation Varnish.

Excellent Resistance to Ageing.

Oil Resistance.



Alternator Core winding.

Oil Filled Transformers Lead Wire Protection.


Class “F” Motor and Generator Lead Wire Protection.

www.kiranudyog.com

Parameters Details


Thermal Temp. 0° C to +155° C


Color Natural, Black

Grade

&

Dielectric Strength

A - 4000 Volts

B – 3000 Volts

C – 2500 Volts




PRODUCT COMPLIANCE


KIRAN PVG – 301




2 Clause 13.



clearly recognized.



Method A

Horizontal with Mandrel

Passes horizontal flame test.


IEC 60684 part 2 clause 14


be visible


conditions.


5. Flexibility Passes. There are neither cracks to be

observed on the surface of the sleeving, nor

does the varnish film come off.

6. Insulation

Resistance




(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

1 PVG301 AWG # 18 1 ± 0.30 0.25 100

2 PVG301 AWG # 12 2 ± 0.40 0.25 100

3 PVG301 AWG # 09 3 ± 0.50 0.35 100

4 PVG301 AWG # 06 4 ± 0.50 0.5 100

5 PVG301 AWG # 04 5 ± 0.50 0.5 100

6 PVG301 AWG # 03 6 ± 0.50 0.5 100

7 PVG301 AWG # 01 7 ± 0.50 0.5 100

8 PVG301 AWG # 00 8 ± 0.60 0.5 100

9 PVG301 AWG # 1/0 9 ± 0.60 0.5 100

10 PVG301 AWG # 2/0 10 ± 0.60 0.65 100

12 PVG301 AWG # 3/0 12 ± 0.60 0.65 50

14 PVG301 AWG # 250 14 ± 1.00 0.65 50

16 PVG301 AWG # 300 16 ± 1.00 0.65 50

18 PVG301 AWG # 400 18 ± 1.00 0.65 50

20 PVG301 AWG # 500 20 ± 1.00 0.65 50

22 PVG301 AWG # 600 22 ± 1.00 0.65 25

25 PVG301 AWG # 750 25 ± 1.00 0.65 25


www.kiranudyog.com


KIRAN VG – 501

POLYVINYL CHLORIDE COATED FIBERGLASS SLEEVING

Fiberglass sleeving impregnated with Polyvinyl chloride varnish is used where reliable heat resistance & dielectric

strength is required. The product available in different grades with varying Dielectric Strength upto 3000 Volts as

per applications, consisting an inner wall layer made out of Fiberglass Yarn that is Braided and Coated with

Polyvinyl. KIRAN VG - 501 B Class sleeving is recommended as a universal coated sleeving for all thermal

requirements of Class 130°C. The sleeving is compatible with most insulating varnishes and is capable of short-

thermo operation above its thermal classification.

They are used in electric equipments such as Generators, Transformers, Electric Motors, Lightening, Home

Appliances, Circuits and Control of various instruments.

FEATURES :

Free of environmentally hazardous and contaminating chemicals, completely different from

conventional polyurethane coating.

Extremely flexible and smooth finish.

UNIQUE PROPERTIES :

Very Flexible.

Good Mechanical Protection.

Extreme Soft Material.

Excellent Resistance to Ageing.

Oil Resistance.


Wiring Harness.

TV Sets.

Domestic Home Appliances.


Mechanical Protection for “B” Class Electrical Machinery.

www.kiranudyog.com

Parameters Details

Thermal Class “B” Class



Color Black, Yellow

Grade

&

Dielectric Strength

A - 3000 Volts

B – 3000 Volts



STANDARD SPECIFICATION


KIRAN VG – 501



1. Heat Resistance Bending before and after Heating as

per BS 2848:1973.



clearly recognized.

2. Rate of Burning Flame Propagation :

As per BS 2848 : 1973 Passes.


conditions.


4. Flexibility Passes. There are neither cracks to be

observed on the surface of the sleeving, nor

does the varnish film come off.

5. Insulation

Resistance

At room Temp. as per BS 2848:1973 Min. 104 MΩ

V. DIMENSIONS as per BS 2848 :


(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

1 VG501 AWG # 18 1 ± 0.15 0.35 100

2 VG501 AWG # 12 2 ± 0.15 0.45 100

3 VG501 AWG # 09 3 ± 0.15 0.45 100

4 VG501 AWG # 06 4 ± 0.15 0.45 100

5 VG501 AWG # 04 5 ± 0.15 0.45 100

6 VG501 AWG # 03 6 ± 0.15 0.45 100

7 VG501 AWG # 01 7 ± 0.15 0.5 100

8 VG501 AWG # 00 8 ± 0.15 0.5 100

9 VG501 AWG # 1/0 9 ± 0.15 0.5 100

10 VG501 AWG # 2/0 10 ± 0.15 0.5 100

12 VG501 AWG # 3/0 12 ± 0.30 0.7 50

14 VG501 AWG # 250 14 ± 0.30 0.7 50

16 VG501 AWG # 300 16 ± 0.30 0.7 50

18 VG501 AWG # 400 18 ± 0.30 0.7 50

20 VG501 AWG # 500 20 ± 0.50 0.7 50

22 VG501 AWG # 600 22 ± 0.50 0.7 25

25 VG501 AWG # 750 25 ± 0.50 0.7 25


www.kiranudyog.com


KIRAN SRG – 001 (Fire)

FIRE RETARDENT SILICON COATED FIBERGLASS SLEEVING Fire retardant Fiberglass sleeving is coated with Silicon are flexible, Fire Sleeving is designed to protect hoses,

wires and cables from the hazards of intense heat and occasional direct flame. KIRAN SRG – 001 Fire Sleeving

protects continuously to 500°F (260°C) and will withstand a molten splash at 2200°F (1200°C). Made of braided

high quality fiberglass yarns in a flexible substrate, it is then coated with a high-grade, fully-cured silicone rubber.

Resistant to hydraulic fluids, lubricating oils, and fuels, fire sleeve insulates against energy loss in piping and

hosing, protects employees from burns and provides flame and molten splash resistant protection for wires, hoses,

and cables. Both Aerospace and Industrial fire sleeves are coated with the same proprietary silicone rubber

compound for increased durability and enhanced heat & flame protection.

Braided (Industrial / Aerospace grade) fire sleeve utilizes a braided interior fiberglass sleeve to provide the highest

level of protection in critical areas potentially exposed to intense fire conditions (ex. an oil line inside of an engine

compartment). In addition to being applicable for use in Aerospace applications by meeting requirements, braided

fire sleeve is also commonly used in Automotive, Maritime, Locomotive, Heavy Equipment and Petrochemical

industries

I. FEATURES :

Excellent High temperature, flexibility with outstanding flame retardant properties.

Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons.

II. UNIQUE PROPERTIES :


Good Expandability and Flexibility.



Oil Resistance.

Self Extinguishable.

III. TYPICAL APPLICATION :

Transportation (Aerospace, Auto, Locomotive, Heavy Equipment) Metals, Iron & Steel Hose Fabrication Oil & Gas OEM

www.kiranudyog.com

Parameters Details

Thermal Class “H” Class

Thermal Temperature 500°F (260°C)

Sizes 10.0mm to 50mm

Color Black and Red Oxide

Grade

&

Dielectric Strength

Min,. 12000 Volts




PRODUCT COMPLIANCE


KIRAN SRG – 001 (Fire)




2 Clause 13,

48hrs at +180°C



clearly recognized.





Method A


Self Extinguish (within 60 Sec).





be visible



conditions


5. Insulation

Resistance


After damp Test as per IEC 60684 Min. 104 MΩ



(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

10 SRG001 AWG # 2/0 10 ± 0.50 0.65 30

12 SRG001 AWG # 3/0 12 ± 0.50 0.65 30

14 SRG001 AWG # 250 14 ± 1.00 0.65 30

16 SRG001 AWG # 300 16 ± 1.00 0.65 30

18 SRG001 AWG # 400 18 ± 1.00 0.65 30

20 SRG001 AWG # 500 20 ± 1.00 0.65 30

22 SRG001 AWG # 600 22 ± 1.00 0.65 30

25 SRG001 AWG # 750 25 ± 1.00 0.65 30


www.kiranudyog.com


KIRAN SRG – 001

HIGH TEMPERATURE SILICON ELASTOMER COATED

FIBERGLASS SLEEVING UL recognized GRADE “A” component under UL File No. # E324343 (UZFT2) and Grade-B UL FILE

NO.E491961,Silicon Elastomer Coated Fiberglass Sleeving are flexible, confirming to wired and connections,

keeping its elasticity in a range between-60ºC to +220º C. It can also with stand up to +250 º C for a short while.

KIRAN SRG - 001 sleeving is a high temperature Silicon Rubber Elastomer that is pressure bonded to a heat

stabilized fiberglass braid. Its outstanding flexibility allows to withstand severe push-back, even in lower

dielectric grades. KIRAN SRG - 001 sleeving is the ideal insulation where sharp bends are encountered or the

ability to expand over irregular shaped parts is required. The electrical strength stays higher even after folding and

bending. The sleeving have excellent abrasion resistance, flame retardant and are physically tough. It can with

stand high difference in temperatures and being moisture resistant, prevents humidity to enhance the life of the

generator / motor.

I. FEATURES :

Excellent low temperature flexibility with outstanding flame retardant properties.

Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons.






Oil Resistance.




Alternator Core winding.

Transformers Lead Wire Protection.

Wind Generators.


Parameters Details


Thermal Temperature -60° C to +180° C

Sizes 0.50mm to 40.0mm


Grade

&

Dielectric Strength

A -- Above 7000 Volts

B – 4000 Volts

C – 2500 Volts

C1 – 1500 Volts

C2 – Less than 1500 Volts




PRODUCT COMPLIANCE

www.kiranudyog.com

KIRAN SRG – 001




2 Clause 13,

48hrs at +180°C



clearly recognized.





Method A







be visible



conditions


5. Insulation

Resistance





(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

0.5 SRG001 AWG # 24 0.5 ± 0.20 0.25 100

1 SRG001 AWG # 18 1 ± 0.20 0.25 100

2 SRG001 AWG # 12 2 ± 0.40 0.25 100

3 SRG001 AWG # 09 3 ± 0.40 0.35 100

4 SRG001 AWG # 06 4 ± 0.50 0.5 100

5 SRG001 AWG # 04 5 ± 0.50 0.5 100

6 SRG001 AWG # 03 6 ± 0.50 0.5 100

7 SRG001 AWG # 01 7 ± 0.50 0.5 100

8 SRG001 AWG # 00 8 ± 0.50 0.5 100

9 SRG001 AWG # 1/0 9 ± 0.50 0.5 100

10 SRG001 AWG # 2/0 10 ± 0.50 0.65 100

12 SRG001 AWG # 3/0 12 ± 0.50 0.65 50

14 SRG001 AWG # 250 14 ± 1.00 0.65 50

16 SRG001 AWG # 300 16 ± 1.00 0.65 50

18 SRG001 AWG # 400 18 ± 1.00 0.65 50

20 SRG001 AWG # 500 20 ± 1.00 0.65 50

22 SRG001 AWG # 600 22 ± 1.00 0.65 25

25 SRG001 AWG # 750 25 ± 1.00 0.65 25


www.kiranudyog.com



KIRAN SRG – 002

SILICON RESIN COATED FIBERGLASS SLEEVING

IEEMA UL recognized component under UL File No. # E318161, Silicon Resin Coated Fiberglass Sleeving are

flexible, confirming to wires and connections, keeping its elasticity in a range between -60°C to +180°C. It can

also with stand up to +220°C for a short while.

KIRAN SRG - 002 is the ideal insulation where sharp bends are encountered or the ability to expand over irregular

shaped parts is required. It is typically used as a protective covering for automotive wiring harnesses and ABS

brake wiring also used for aerospace and aircraft wiring leads as well as for heat generating appliances such as

coffee pots, hair dryers, toasters, etc. KIRAN SRG 002 can also be used for covering leads on extrusion plastic

molding, die casting machinery and presses.

I. FEATURES :

Good abrasion and radiation resistance.

Aero space and Atomic energy applications.






Oil Resistance.




Alternator Core Winding.

Transformers Lead Wire Protection.

Carbon Brush Wiring Protection.


www.kiranudyog.com

Parameters Details





Grade

&

Dielectric Strength

A -- Above 7000 Volts

B – 4000 Volts

C – 2500 Volts

C1 – 1500 Volts

C2 – Less than 1500 Volts




PRODUCT COMPLIANCE


KIRAN SRG – 002 IV. TECHNICAL CHARACTERISTICS :



2 Clause 13,

48hrs at +180°C



clearly recognized.



Method A






be visible


conditions


5. Insulation

Resistance





(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

0.5 SRG001 AWG # 24 0.5 ± 0.20 0.25 100

1 SRG001 AWG # 18 1 ± 0.20 0.25 100

2 SRG001 AWG # 12 2 ± 0.40 0.25 100

3 SRG001 AWG # 09 3 ± 0.40 0.35 100

4 SRG001 AWG # 06 4 ± 0.50 0.5 100

5 SRG001 AWG # 04 5 ± 0.50 0.5 100

6 SRG001 AWG # 03 6 ± 0.50 0.5 100

7 SRG001 AWG # 01 7 ± 0.50 0.5 100

8 SRG001 AWG # 00 8 ± 0.50 0.5 100

9 SRG001 AWG # 1/0 9 ± 0.50 0.5 100

10 SRG001 AWG # 2/0 10 ± 0.50 0.65 100

12 SRG001 AWG # 3/0 12 ± 0.50 0.65 50

14 SRG001 AWG # 250 14 ± 1.00 0.65 50

16 SRG001 AWG # 300 16 ± 1.00 0.65 50

18 SRG001 AWG # 400 18 ± 1.00 0.65 50

20 SRG001 AWG # 500 20 ± 1.00 0.65 50

22 SRG001 AWG # 600 22 ± 1.00 0.65 25

25 SRG001 AWG # 750 25 ± 1.00 0.65 25


www.kiranudyog.com


KIRAN VPI – 155

VPI ACRYLIC COATED FIBERGLASS SLEEVING

UL recognized component under UL File No. # E491961, Acrylic Coated Fiberglass Braided Sleeving are

precisely engineered sleeving are flexible with an outer layer of E glass Fiberglass braid. The outer fiberglass braid

is lightly treated with acrylic resin to prevent fray, improve abrasion resistance and allow coating by the VPI resin.

KIRAN VPI - 155 is used for applications which require VPI processes and higher temperatures. It can be used for

high voltage transformers as well as for aerospace and aircraft wiring leads. VPI-155 sleeving allows for expansion

to fit over difficult joints and terminals.

FEATURES :

KIRAN VPI - 155 with an over braided glass jacket.

Lightly treated with acrylic resin to prevent end fray and improve abrasion resistance.

Resistant to most acids and most organic solvents.

UNIQUE PROPERTIES :


Excellent Low Temperature Flexibility.



Oil Resistance.

Longer Shelf Life.


Aero Space and Aircraft Wiring.

Wind Turbines, Solar Panels and Alternator Core Winding.

High Voltage Transformers.

Heat Generating Appliances.

VPI Application.

www.kiranudyog.com

Parameters Details



Inner Diameter 2mm to 20.0mm


Grade

&

Dielectric Strength

A - 7000 Volts

B – 4000 Volts




PRODUCT COMPLIANCE


KIRAN VPI – 155




2 Clause 13,

48hrs at +155°C



clearly recognized.





Method A


Self Extinguish (within 60 Sec.)





be visible



conditions


5. Insulation

Resistance




(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

2 AG701 AWG # 12 2 ± 0.20 0.25 100

3 AG701 AWG # 09 3 ± 0.40 0.35 100

4 AG701 AWG # 06 4 ± 0.40 0.5 100

5 AG701 AWG # 04 5 ± 0.50 0.5 100

6 AG701 AWG # 03 6 ± 0.50 0.5 100

7 AG701 AWG # 01 7 ± 0.50 0.5 100

8 AG701 AWG # 00 8 ± 0.50 0.5 100

9 AG701 AWG # 1/0 9 ± 0.50 0.5 100

10 AG701 AWG # 2/0 10 ± 0.50 0.65 100

12 AG701 AWG # 3/0 12 ± 0.50 0.65 50

14 AG701 AWG # 250 14 ± 0.50 0.65 50

16 AG701 AWG # 300 16 ± 1.00 0.65 50

18 AG701 AWG # 400 18 ± 1.00 0.65 50

20 AG701 AWG # 500 20 ± 1.00 0.65 50


www.kiranudyog.com


KIRAN KVPI – 200

VPI SILICON COATED FIBERGLASS SLEEVING

UL recognized GRADE “A” component under UL File No. # E324343 (UZFT2) and NEMA TF – 1 Type 5,

Silicon Elastomer Coated Fiberglass Sleeving are flexible with an outer layer of Fiberglass braid. The over braid

bonding process adheres the over braid to the silicon coated substrate and minimizes end fray to improve assembly

performance and eliminate the long term handling effects of operator dermatitis. KIRAN KVPI - 200 sleeving is a

high temperature Silicon Rubber Elastomer that is pressure bonded to a heat stabilized fiberglass braid.

KIRAN VPI – 200 Silicon Sleeving is resistant to most acids, oils, organic solvents and water. It is also compatible

with virtually all Electrical grade varnishes and Impregnation systems suitable for all VPI applications.

I. FEATURES :

This double wall sleeving provides higher abrasion resistance and for vacuum pressure impregnation.

Overlap braid on sleeving being saturated has high resin absorption properties and are highly protective.






Oil Resistance.



Aero Space and Aircraft Wiring.

Wind Turbines, Solar Panels and Alternator Core Winding.

High Voltage Transformers.

Heat Generating Appliances.

VPI Application.

www.kiranudyog.com

Parameters Details




Braid Color White

Sleeving Color Natural / Black

Grade

&

Dielectric Strength

A -- 7000 Volts

B – 4000 Volts




PRODUCT COMPLIANCE


KIRAN KVPI – 200




2 Clause 13,

48hrs at +180°C



clearly recognized.





Method A







be visible



conditions


5. Insulation

Resistance





(AWG)

Nominal Bore

(mm)

Bore Tolerance

(mm)

Minimum Wall

Thickness (mm)

Standard

Packing (Mtrs)

2 KVPI200 AWG # 12 2 ± 0.40 0.25 100

3 KVPI200 AWG # 09 3 ± 0.40 0.35 100

4 KVPI200 AWG # 06 4 ± 0.50 0.5 100

5 KVPI200 AWG # 04 5 ± 0.50 0.5 100

6 KVPI200 AWG # 03 6 ± 0.50 0.5 100

7 KVPI200 AWG # 01 7 ± 0.50 0.5 100

8 KVPI200 AWG # 00 8 ± 0.50 0.5 100

9 KVPI200 AWG # 1/0 9 ± 0.50 0.5 100

10 KVPI200 AWG # 2/0 10 ± 0.50 0.65 100

12 KVPI200 AWG # 3/0 12 ± 0.50 0.65 50

14 KVPI200 AWG # 250 14 ± 1.00 0.65 50

16 KVPI200 AWG # 300 16 ± 1.00 0.65 50

18 KVPI200 AWG # 400 18 ± 1.00 0.65 50

20 KVPI200 AWG # 500 20 ± 1.00 0.65 50


www.kiranudyog.com


Documents

KIRAN AG 701 - Kiran Udyogkiranudyog.com/wp-content/uploads/2018/02/kiran-sleeving.pdfKIRAN NMG 601 NYLON MONOFILAMENT EXPANDABLE SLEEVING NYLON Monofilament Expandable Sleeving is