Katalog en Final

1

How to fi nd the right product for professional sealing:

Products for external sealing/application

Products for central sealing/application

Products for internal sealing/application

Company profile: 2

System solutions: Connecting joints 3 Facade system 5 Duo Window Foil 6 i3 system 7 illmod Trio 8

Products:

� Sealants Silicone FA 101 Windows and Perimeter 9 FA 151 Windows and Perimeter 9 NM 131 Natural stone 10 Pyrosil B 10 GS 221 Glass and Metal 10 SB 241 Sanitary silicone 11 AQ 201 Aquarium silicone 11 Acrylic LD 701 Structural acrylic sealant 11 LD 702 Perimeter acrylic sealant 11 LD 703 Painter acrylic sealant 12 Organic Window Putty TX-2001 S 12 Application spreadsheet Bituminous OT 11 Bitumen sealant 12 Polyurethane PU 15 sealant 13 PU 25 sealant 13� Foams 1 C 1C low expansion foam MAXX all season 15 1C Winter / gun foam 15 1C Elastic gun foam 15 1C Fire Retardant Gun Foam 15 1C Mounting PUR foam 16 1C Comfort PUR foam 16 1C Water Well Mounting foam 16 2 C 2C Mounting PUR foam 16 2C fast curing TWIN FOAM 17� Adhesives SF 141 Mirror adhesive 17 Adhesive foam 010 17 PU 01/08 Gun Adhesive 18 PU 11 Construction adhesive RAPID 18 PU 12 Construction adhesive 18 PU 13 Construction adhesive ULTRA 19 PU 14 Construction adhesive MULTI 19 PU 15 Roof adhesive 19 PU 40 Sealant adhesive 20 PU 50 Sealant adhesive 20 PU 82 2C Construction adhesive 20 MS 40 Sealant adhesive 21 MS 55 Sealant adhesive 21 OT 12 PVC adhesive 21 OT 13 Contact adhesive 21 OT 15 Paste adhesive 22 OT 20 Paste adhesive 22 MT 13 Mounting adhesive EXTRA 22 MT 11 Mounting adhesive ECO 22 Nathpaste 23 WD 11 Wood adhesive D2 23 WD 12 Wood adhesive D2 RAPID 23 WD 13 Wood adhesive D3 / D4 24 WD 14 Wood adhesive hardener D4 24 CT 11 Contact adhesive 24 CT 12 Contact adhesive Gel 25 CT 13 Contact adhesive Spray 25 SF 14 Spray adhesive 25 SF 18 Spray adhesive 26 SF 22 Contact spray adhesive 26 SF 24 Spray adhesive 26

� Tapes PU illmod TRIO 27 illmod 600 27 illmod ECO 27 illac 600 28 illac 28 illmod i 28 illmod a 28 illmod 2D 29 PVC TV 110 PVC foam tape 29 TV 120 PVC foam tape 29 TV 130 PVC foam tape 29 illrid 30 EPDM TO 110 30 PE TE 121 30 PE tape with/out liner 30 PE round profile 31 Ceramic Pyrosil B 31 Butyl TB 210 butyl tape 31 TB 211 butyl tape 31 illbruck butyl tape 32 TB 220 butyl with PVC core 32 Double sides TA 200 acrylic tape 32 TA 201 PVC tape 32 TE 210 PE tape 33 TE 211 PE tape 33 TE 212 PE tape 33 TE 220 PE tape 34 V 2100/2200 SG tape 34 V 2800 PU tape 34� Foils Sealing FF 220 / FF 220 HP EPDM foil 38 FF 220 butyl / SK adhesive 38 FF 210 butyl foil 38 FF 210 butyl / SK adhesive 39 illbruck Duo Window Foil 39 Window Foil Exterior 40 Window Foil Interior 40 Window butyl foil 41 Butyl Fleece 41 Butyl ALU 41 Bitumen ALU 42 Protecting FO 310 PP foil 42 and covering FO 311, FO 313 AL foils 42 FO 210 Masking tape - paper 42 FO 211 Masking tape - PVC 43 FO 212 Protecting foil 43 FO 213 Protecting foil 43 Application spreadsheet� Trims Window trim Interior 44 Window trim Exterior 44 Styrofoam window sill blocks 44� Accessories Primers R 40 cleaner 45 and cleaners MT 15 trim cleaner 45 PUR FOAM cleaner 45 Butyl & Bitumen primer 45 Primer S 46 Primer NS 46 Glattmittel 46 Guns PUR foam guns 46 Mechanical sealants guns 47 Pneumatic sealant guns 47 Vacuum manipulators 47 Others Clamps 47 Spatulas 47 Setting blocks 47� Table of tape/foil applications 35� Table of sealants compatibility and primer requirements 14

Content

2

Company profile

We protect what you create

Times are changing. So are buildings. It is a fact; changes in both environmental legisla-tion and building standards force the building industry to be more flexible and innovative than ever before. Topics like durability and sustainability of buildings have led to chan-ges in construction methods and practices and with soaring prices for oil and gas, ener-gy conservation has become one of the top priorities. Besides this increased complexity of requirements, our customers have to meet tight deadlines and stay focused on their daily tasks, hence, the need for a part-ner they can rely on.

At Tremco illbruck, we have a deep unders-tanding and appreciation for what our busi-ness partners do, and what architects and craftsmen create has a value. Tremco illbruck is here to protect these values – innovative, high-quality sealant solutions for any kind of building.

Global know-how, local expertise

Tremco illbruck’s core business is focused on the sealing of buildings. Providing sealant solutions for windows, facades and flooring, the company is serving clearly defined mar-kets, sharing technologies and best practises across business throughout Europe, Africa and the Middle East. Through our decentrali-zed organisation, customers benefit directly from international reach, a full range of tech-nological know-how and our familiarity with local regulations such as industry standards or environmental legislation.

With more than 1,000 employees and generating an annual turnover of 250 million Euros, Tremco illbruck is part of US-based RPM Group - and one of the few companies with the ability to provide comprehensive solutions for the construction industry. Something that made us earn leadership positions in markets across Europe.

Building on our extensive experience, we developed strong premium brands such as Tremco, illbruck, Perennator, Coco and Nul-lifire - brands that stand for innovation, high quality, reliability and unrivalled services.

Innovation for tomorrowSystems & Service

High-tech enterprises thrive on innovation, and Tremco illbruck is no exception. Innovati-on has been the common thread throughout our company’s history. Today more than ever before, the key challenge is to incorporate the latest research into new products that aim to exceed our customers’ expectations and to come up with system solutions and extensive services that simply make life

easier.

One place for all you need

The Tremco illbruck Group allows its custo-mers to choose from a broad product range that covers all important fields - protective sealant solutions for most construction applications. Prior to being sold to the mar-ket, each product is thoroughly tested. As a result, high quality products with extremely long life-cycles become available, offering long warranty periods that are hard to find elsewhere in the industry. We know our pro-ducts might only be a small yet invisible part of a building, but to leave them out of your plans would endanger their one and only pur-pose: to protect what you create.

3

Mould – a result of incorrect installation

Connecting joints

Introduction

This article contains a number of recommen-dations and explanations regarding the crea-tion of sealing of window, door and AL/glass facade connecting joints that will maintain functionality over a long period of time. You will of course also find materials suitable for general use in connecting joints.

What is a facade and window connecting joint?

The term “connecting joint” classifies the space, of which normally there are tens of metres on the facade envelope of each buil-ding between the masonry and other con-struction sections such as windows, doors, AL/glass facades and roof skylights.

Why pay attention to the sealing of a connecting joint

A connecting joint is a space that should achieve similar thermal insulation properties and durability as its adjacent construction sections in accordance with local norms fol-lowing the EU Council directive 2002/91/EC. This directive implemented on the local level for builders actually means that they will need to provably implement measures in the area of reducing the energy performance of buildings and will apply to the majority of newly constructed buildings as well as in

instances of carrying out greater modifica-tions to existing buildings. The elementary indicators for assessing the energy perfor-mance are thermal and lighting technical properties of structures and the parameters of technical fittings’ operation in buildings. Fulfilment of the requirements will be docu-mented by an energy performance certifi-cate. Therefore, it can be assumed that a greater emphasis will also be placed on durable and high-quality installations of connection details in structures. Should this aspect be underestimated, it would have a negative impact on the building’s overall characteristics and therefore also its value.

Unsatisfactory condition On many buildings nowadays still pre-vails a solution, when a joint is only foamed-in with polyurethane foam and plastered over from the outside as well as from the inside. Although dry polyurethane foam itself provides good thermal insulation, many building contractors still perceive it as a sufficient and effective joint filling solution. However, the reverse is actually true. Ther-mal insulation that is unprotected against the adverse effects of weather and air moisture from the interior significantly increases its moistness and therefore also its thermal conductivity. This, in combination with low temperatures in winter, is usually the star-ting mechanism for the degrading processes of materials and the cause leading towards

the decrease of an overall detail’s life. If any of the connecting joint’s sealing functi-ons is violated, then thermal bridges and plaster cracks appear, the joint’s tightness diminishes and mould grows. Last but not least, sound transmission through the detail increases. This may occur with windows of all common groups of materials ( made from aluminium, PVC, wood and of their combina-tions ) as well as AL/glass facades.

Detail design

It is an absolute necessity to design a solu-tion, select products and consider feasibility together with a coordination of contractors’ works from the point of creating an overall high-quality construction work. This applies especially for the creation of a connection solution for component structures that main-tains functionality over a long period of time. The key to successful implementation usu-ally lies in detailed project documentation, which, if elaborated all the way through to the phase of details, significantly contributes towards an optimisation of the construction progress.

Housing estate in Švédska Street, Prague 5

4

Requirements for the connecting joint’s function

• zero leakage into the joint • zero air transmission through the joint • effective evaporation of the joint; mini mization of potential condensation inside joints • enables dilatation movement • thermal and sound insulation

Materials

Selected suitable sealants, prefabricated round profiles/backing rods, strips, foils, adhesive tapes or special profiles may gene-rally be used as sealing materials. Vapour tight for interior and on the contrary water proof but vapour open, weather resistant tapes or foils for the exterior may comprise of plastics, aluminium, elastomers, bitumi-nous material and their various combinations with verified tightness. The fact that “ther-mal insulation” such as PUR foams or mine-ral wool insulation are only able to compens-ate dilatation movements of construction elements to a limited extent and therefore are not a sufficient solution for connecting joint detail, is an important point that should not be neglected.

Internal barrier Function area External barrier

water-tight membrane thermal insulation

Principle

The most convenient solution is usually to layer several materials in a joint, as stated in the product diagram below, which in mutual interaction maintain the joint in a completely dry and functional condition. The impermeable layer is usually located on the internal side of the insulati-on plane, which prevents air flow into the structure or joint. Highly permeable and at the same time driving rain penetration resistant materials are then located on the external side. Connections and joints must be sealed by effective sealing materials with required life, and weather effects, dilatation movements and volume changes resistance. From the point of view of water vapour penetration and the risk of water vapour condensation in a structure, it is usually convenient to arrange the layers in a structure in order of a gradual decrease of the diffusion resistance factor of the layers in the direction from the internal surface (from the interior). However, this does not apply to all materials available on the market. A sealing foil with a variable water vapour penetration tightness value may be considered as very exceptional amongst the materials on today’s market. Such materials enable application as an external as well as internal barrier of a joint. Their advantage is amongst others in lower requirements for contractors’ competence and facilitation of detail planning.

Advantages of correct sealing

• energy saving thanks to prevention of thermal bridges and close to zero air transmission • maximum reliability and durability of the joint • reduction of the level of sound transmission through the joint • prevention of moisture penetration and growth of mould in the joint• elimination of possible water condensation on interior surfaces

The most suitable materials for forming the primary protection against driving rain penetration into a joint under the effects of weather and are also highly diffusion permeable, which allow for evaporation of the connecting joint.

The space between the window frame and wall should be fi lled with a high-quality thermal and sound insulating material.

moisture and air-tight membrane

Serves as an air as well as moisture penetration resistant barrier for the joint and at the same time, the principle “inside tighter than outside” applies.

Three-stage sealing

e.g. – illmod 600 – Window Foil Exterior – Duo Window Foil – Facade Foil FF 220

e.g. – illbruck PUR gun foam e.g. – Window Foil Interior – Window Butyl Foil – Duo Window Foil – Facade Foil FF 210

5

Facade sealing system

Professional sealing of facade connecting joints

This complex sealing system for “connecting joints” of facade structures offers time tested and proven materials in a combina-tion, which guarantees that the joint is per-fectly sealed. It meets the criteria of current standards determined mainly by the require-ments on the thermal protection of buildings in accordance with local norms following the EU Council directive 2002/91/EC. The product composition inside the connecting joint complies with the universally applicable principle “inside tighter than outside”, whe-re an air-tight foil is on the inside of the joint, which prevents air moisture (water vapours) from penetrating the joint’s thermal insula-tion material. This function is fulfilled by the illbruck FF 210 Butyl Foil. The outside of the joint is protected by a foil with maximum resistance against the effects of weather, wi-th a long-lasting UV stability, tight against the attacks of driven rain – the illbruck FF 220 or FF 220 HP with optimised water vapour permeability, which allows the detail to be adequately ventilated. The joint between these two membranes must of course be filled with a suitable thermally insulating material, such as for instance mineral wool or PUR foam of suitable properties. Materi-als of both foils are produced on the basis of synthetic rubber, containing also black, filler, antioxidants and vulcanising agents. Thanks

System advantages:

• Excellent resistance against ageing • Long life and UV resistance of the exterior foil • Difference in diffusion resistances of the internal and external barrier prevents condensation and develop- ment of mould inside the joint • 100% waterproof and air tight, guaranteeing correct functioning of the joint’s thermal insulation • High mechanical resistance of the foil materials against puncturing • Transfer of dilatation movements in longitudinal and transversal directions • Integral foil type identification preven- ting interchanging during application

to their chemical composition, the materials are very elastic, resilient, flexible and at the same time puncture resistant. They are also extremely resistant against ageing, even when permanently exposed to the effects of weather, UV radiation, temperature fluctua-tions and various chemicals. EPDM (illbruck FF 220 / FF 220 HP) and butyl (illbruck FF 210) foils do not contain any softeners, and hence there is no risk of migration of these substances into the surrounding surfaces. Both foils have been supplied by our compa-ny to construction projects for more than 10 years as water and vapour insulation for both interior and exterior applications.

Products in the system:


Mineral wool insulation FF 210

Three-stage sealing

FF 220 HP

FF 220

Silicone FA 101

6

illbruck Duo Window Foil – 1 window foil for 2 applications

illbruck Duo Window Foil is the world’s first and only window foil which changes its water vapour parameters according to ambient temperature conditions to ensure the connecting joint’s all year-round dry insulation. The foil’s climatic ability enables a permanent drying out of the connecting joint by altering its permeability towards penetrati-on by water vapour according to ambient humidi-ty. The higher the relative humidity around the foil, the less water vapour-proof it is and vice versa. When the indoor temperature is higher than the outdoor temperature, Duo Window Foil prevents air moisture from penetrating the connection joint and at the same time enables the connecting joint’s ventilation into the exterior. The rule applies that moisture diffuses from the warmer side into the colder side. When the indoor temperature is lower than the outdoor temperature, and moisture transmits through the connecting joint’s thermal insulation from the warmer outdoor side through to the cooler indoor side, Duo Window Foil ena-bles the drying out into the interior!Owing to this unique property, it is possible to use

illbruck Duo Window Foil EW – the simplest application of window foils

In the case of classic standard window foils marked for instance Window Foil interior version E, the adhesive is normally applied to one side of the foil, which can be glued only in the L shape. Version W on the other hand only allows for the foil to be glued in the Z shape. The specification for Duo Window Foil EW combines both standard window foil versions in one and can be applied in either the L shape or the Z shape. Therefore with the new innovative design of illbruck Duo Window Foil EW, you really need only one foil to make a complete insulation of the window connecting joint.

a single foil from the external as well as the inter-nal side of the connecting joint.

Advantages of illbruck Duo Window Foil:

• 10 year guarantee for the connecting joint’s functionality • Dynamic moisture transfer from the connecting joint thanks to its variable “sd” value • Single product design for interior and exterior usage = removes accidental mix-up possibility • maximum reliability of the connecting joint functionality all year round • optimised stock control • energy saving

illbruck Duo Window Foil

3 options of bonding to the window reveal:

• with butyl

• glued with Nahtpaste or PU 25

• with mesh

Two versions of illbruck Duo Window Foil:

• illbruck DuoWindow Foil EW - classical flat foil

illbruck Duo Window Foil Flex – a foil with a movement loop


Duo Window Foil Flex illbruck PUR gun foam

The most suitable materials for forming the primary protection against driving rain penetration into a joint under the effects of weather and are also highly diffusion permeable, which allow for evaporation of the connecting joint.


Duo Window Foil Flex

Serves as an air as well as moisture penetration resistant barrier for the joint and the rule applies that moisture diffuses from the warmer side into the colder side.

Three-stage sealing

Duo Window Foil EW Duo Window Foil EW

•

7

Window sealing system i3

Window sealing system i3

It is necessary to pay attention to the correct sealing of a connecting joint when installing windows. It is not sufficient to just fill a joint with PUR foam because it brings numerous problems in the future. To provide preven-tion against a growth of mould and proper thermal fucionality in joints, we recommend that you to use the window sealing system i3. This system complies with all modern requirements on energy saving and joint sealing. It has been verified by independent institutes for window technology. The mutu-al reactions of the components under extre-me conditions were also tested. The system was assessed as a whole. Nine system components for internal, central as well as external sealing may be arbitrarily combined according to the individual needs of a par-ticular construction project. Independently from the window frames material, you can decide, which of the products from the sys-tem illbruck „i3“ you wish to use.

Advantages of the window sealing system i3

• 10 year guarantee for the connecting joint’s functionality • return on investment within the guarantee period thanks to energy saving • substantial reduction of noise level • prevention of moisture penetration and growth of mould • 3 options of foil installation • the EW variant of foils enables easy installation and detail formation


illbruck PUR gun foam

Forms the primary protection against driving rain penetration into a joint under the effects of weather. The designed materials are also highly vapour-permeable and allow for evaporation of the connecting joint, in which water vapour may accumulate and condensate.


Serves as an air as well as moisture penetration resistant barrier for the joint and at the same time, the principle “inside tighter than outside” applies. The differences in window sealing system i3 materials’ tightness are selected with an emphasis to the greatest possible difference between the joint’s exterior and the interior side. The recommended difference in the tightness of both materials indicated by the Sd value should be at least 10x.

Three-stage sealing

illmod 600

Window Foil Exterior

Window Foil Interior

Window Butyl Foil

FA 101 Window and Perimeter Silicone

Butyl Fleece

8

illmod Trio

High-quality and convenient technology for the fastest possible window installation on the market

illbruck illmod Trio is an impregnated compres-sion multifunction tape designed for a com-prehensive sealing of joints. It is suitable mainly for the sealing of connecting movement joints e.g. window / door frames and the reveal. Such a connection is waterproof, air-tight and the joint is also thermally insulated. illmod Trio is an insulation material that enables joint sealing using one product only and at the same time, the principle “inside tighter than outside” still applies. This product was developed for extre-mely fast and safe insulation during the installa-tion of windows and doors.

Interior Function area Exterior

Three-stage sealing

Advantages

• tight against driving rain, thermal insulation and air transmission tightness • without application temperature and weather conditions limitation • easy and fast window insulation within a single work step • weather effects resistant including UV stability • very suitable for movement joints

Advantages in comparison with PUR foam:

• no curing time• no additional cutting • ideal movement capability • minimum waste • the product is not classified as dangerous (not even its waste) • weather effects resistant + UV stability• waterproof up to 600 Pa • application at low temperatures

Application:

• pre-cast buildings made of wood, steel, sandwich panels etc. • prefabricated concrete constructions • constructions built from bricks or blocks for exact positioning

The material was tested for:

• sound transmission insulation• water-tightness • air-tightness

illmod Trio illmod Trioillmod Trio

9

Sanitary silicone may be used in wet areas for jointing walls, floors and connecting joints.

Alkoxy (neutral curing system)

Acetoxy (acetoxy curing system)

Acryl

How to find the right product for your purpose:

Sealants

FA 101 Windows and Perimeter Joints Silicone

FA 151 Windows and Perimeter Joints Silicone

Colourtransparent, white, grey, black, brown, jas-mine, transparent grey, concrete grey, silver grey, light grey, medium grey, manhattan grey

Advantages• 10 year guarantee within the system „i3“*• abrasion and mould resistant • UV radiation and weather effects resistant • long-term elasticity Packaging310 ml – cartridge600 ml – sausage

This product belongs to the sealing system (page 7).

MaterialSingle-component neutral silicone sealant that cures with air moisture and is specially designed for window/door frame glazing in-cluding butt joint sealing.

ApplicationExcellent adhesion to glass, wood, paints, varnishes, metals, ceramics, PVC, plastics and other surfaces, e.g. mineral (see the ta-ble Applications of Primers). Patented formu-la guarantees a long-term elastic joint sealing and a good compatibility with a wide variety of materials.

MaterialNeutrally-curing, one-component elastic sili-cone sealant which cures with air-moisture into an elastic sealant. Its viscosity is well balanced for industrial applications with a compressed air gun.

ApplicationPerennator FA 151 is particularly suitable for wooden window frames glazing as well as connecting joints and other movement joints. It offers long-term, good adhesion to most non-porous surfaces such as e.g. an-odized aluminium, polyacrylate, polycarbona-te, coated or glazed wood, glass and glazed surfaces.

Colourtransparent, white, grey, black, brown

Advantages• UV radiation and weather effects resistant • no sagging, easy tool-able • suitable for air gun application • resistant to mould fungus (mould resistant)

Packaging310 ml – cartridge600 ml – sausage

10

NM 131 Natural Stone Silicone

Pyrosil B

GS 221 Silicone for Glass and Metal

Advantages• no colouring of the jointed materials’ edges • long-term elasticity • mould resistant • UV resistant Packaging310 ml – cartridge

MaterialSingle-component neutral silicone sealant that that cures with air-moisture

ApplicationThis silicone is suited for use when sealing joints of very absorbent and sensitive mate-rials such as marble and natural stone. Does not cause soiling and staining of the jointed materials’ edges after vulcanizing.

Colourtransparent, white, beige bahamma, velvet black, medium grey, dark grey

MaterialSingle-component neutral silicone sealant that that cures with air-moisture.

ApplicationNon-flammable sealing silicone material pur-suant to DIN 4102, class B1. This silicone is designed for use in the sealing and jointing of fire resistant building parts, e.g. for glazing and all types of butt and connecting joints.

Colourwhite, grey, black

Advantages• non-flammable • UV radiation resistant

Packaging310 ml – cartridge

MaterialSingle-component acetoxy silicone that cu-res with air-moisture.

ApplicationThis silicone is designed for use in the gla-zing of aluminium window/door frames and also for glass constructions joint sealing.

Colour transparent, white, grey, brown, black

Advantages• excellent adhesion • excellent resistance to ageing • UV radiation resistant


11

Advantages• mould resistant • long-term elasticity • long-term resistance to ageing



ApplicationOwing to its mould and fungi resistance, the silicone is particularly suited for application in damp environments such as kitchens and bathrooms.

Colourtransparent, white, beige bahamma, manhattan grey

SB 241 Sanitary Silicone


ApplicationThis fast setting silicone is especially suited for use when bonding aquariums, glass dis-play cases and all-glass constructions.

Colourtransparent, black

Advantages• excellent adhesive performance • physiologically non-toxic• resistant to the effects of sea water • approved for use in contact with foodstuffs


AQ 201 Aquarium Silicone

MaterialPlasto-elastic dispersive acrylic sealing ma-terial with a structure that corresponds to plaster.

ApplicationParticularly suitable for use in the repairs of structural plasters’ appearance. Can be used for the sealing of joints and cracks in brick-work, lime blocks, stone, plaster.

Colour white

Advantages• plaster structure • can be plastered and painted over• UV and weather effects resistant


LD 701 Structural Acrylic Sealant

MaterialPlasto-elastic dispersive acrylic sealant de-signed for use in the sealing of interior butt joints with a minimum movement capacity for the adjacent constructions.

ApplicationParticularly suited for joints between the interior door frame and the adjacent brick-work, plaster, plasterboard. Can be applied on damp base surfaces, can be painted and plastered over.

Colour white, grey, black, chocolate brown

Advantages• can be plastered and painted over• good adhesion to porous materials• fast-setting


LD 702 Perimeter Acrylic Sealant

12

Windows Putty TX - 2001 S

OT 11 Bitumen Sealant

Advantages• can be plastered and painted over• good adhesion to porous materials• movement capability up to 15% Packaging310 ml – cartridge

MaterialPlasto-elastic dispersive acrylic sealant de-signed for use in the sealing of interior butt joints with middle movement capacity for the adjacent constructions.

ApplicationParticularly suited for joints between the interior door frame and the adjacent brick-work, plaster, plasterboard. Can be applied on damp base surfaces, can be painted and plastered over.

Colourwhite

Advantages• rapid setting putty• easy to apply by hand or with putty spray equipment• low volume shrinkage of less then 2,5% Packaging585 ml – foil bag (diameter 50 mm)1165 ml – foil bag (diameter 56 mm)11 kg – bucket25 kg – bucket

MaterialPlastix thixotropic putty based on organic and synthetic oils.

ApplicationWindow Putty TX-2001 S is suitable for sea-ling of a single-pane glass and industrial glass in consideration with DIN 18 545 part 3.

Colourgrey, brown

Advantages• good adhesion• odourless • thixotropic, non-toxic • adheres to wet surfaces • moisture barrier Packaging310 ml – 24 pieces in a carton

MaterialPlasto-elastic neutrally curing sealant based on superior-quality bitumen rubber.

ApplicationParticularly suited for the bonding of illbruck façade systems foils ( EPDM and butyl ) as well as roof insulation bitumen materials (APP and SBS modified bitumen). It is fur-ther used for water-tight joint sealing, vapour barrier creation, jointing applications in roof ridges, chimneys and skylights. Fast solution for leakages and urgent repairs even when applied on wet surfaces.

Colourblack

LD 703 Painter Acrylic Sealant

13

PU 15 Sealant

PU 25 Sealant

Colourwhite, marble white, black, brown, dark grey, special grey, aluminium stone grey, Nordic stone grey, buff

Advantages• chemically resistant to the effects of water and sea water • UV and weather resistant • excellent adhesion and compatibility with various coatings • high elasticity• can be also used on damp base surfaces• wide colour range Packaging310 ml – cartridge600 ml – sausage

MaterialPU 15 sealant is a single-component polyure-thane based sealing material that cures with air-moisture and is specially designed for high-movement connecting joints.

ApplicationThe sealant has excellent adhesion proper-ties for use on a variety of building materials, especially concrete and brickworks. It is used for the sealing of butt and connecting joints in the building industry, particularly suited for concrete buildings ( block of flats ) exterior joint sealing and renovation as well as for joint sealing in refrigeration and air-conditioning technologies.

Advantages• excellent compatibility with a variety of coatings • excellent long-term ageing resistance • can be also used on damp base surfaces • excellent adhesion to polystyrene Packaging310 ml – cartridge600 ml – sausage

MaterialPU 25 Sealant is a single-component polyu-rethane material that cures with air-moisture

ApplicationThis sealant has excellent adhesion qualities with a variety of building materials. It is used for the sealing of butt and connecting joints in the building industry and is particularly suited for use in the bonding and sealing of illbruck window foils.

Colourwhite, grey, other colours on demand

14

Sealants FA 101Windows and perime-ter joints silicone

NM 131Natural stone silicone

SF 141Mirror adhesive silicone

Pyrosil BFire pro-tective silicone

AQ 201Aquariumsilicone

GS 221Siliconefor glass and metal

SB 241Sanitarysilicone

LD 701Structuralacryl

LD 702Acryl

base surface materials

min

eral

base

sur

face

s

concrete S S S S - - - without without1

porous concrete S S - S - - - - without1

marble - S - - - - - - -

plaster1 S S S S - - - without without1

sandstone - S - S - - - without (without)1

brickwork S S S S - - - without without

met

als

natural aluminium NS (without)/NS without/NS without without/NS without/NS without/NS without (without)

stain anodized aluminium without without/NS without/NS without without/NS without/NS without/NS without (without)

lead NS NS NS - - - - - -

brass NS NS NS NS - - - - -

copper without/NS NS NS NS - - - - -

stainless steel class V2A without/NS NS NS NS NS NS NS - (without)

plain steel NS NS NS NS - - - - (without)

galvanized steel NS NS NS NS - - - - (without)

zinc sheet NS NS NS NS - - - - -

varn

ishe

s/co

atin

gs

alkyd resin based varnish without without without without - - (without) - without

alkyd resin based glazing paint without without without without - - (without) - without

alkyd resin based paint without without without without - - - - without

epoxy coating without without without without without without without - without

plas

tics

acryl glass (plexiglass)3 without/NS without/S S - - - - - -

polykarbonate3 without without/NS NS - NS3 - - - -

polyester (glass fibres reinforced) without without without - - without without - (without)

hard PVC without/NS without NS - - - NS - without

glaz

ed

surf

aces

enamel without without without - without without without - -

ceramic without without without without without without without - -

ceramic (rear side) S S S S - - - - -

woo

d varnished wood2 without without without without - - - - -

double varnished wood2 without without without without - - (without) - -

Misc

ell-

aneo

us glass without without without without without without without - -

styrofoam - - - - - - - - (without)

We will provide information on the compatibility of silicones with other surfaces upon request. NS = primer for non-porous surfaces S = primer for porous surfaces (without) = due to the various type of material the adhesion performance test prior application is recommended without = without any problems - = not suitable

1 = surfaces in contact with sealant must be free of any coatings and impregnations, otherwise the adhesion and curing of sealant may be impaired 2 = solvent based varnishes and coatings all the way to the first intermediate coating; in other cases, carry out a test or contact us 3 = risk of tears in the event of material stressing * = the adhesion of the acryl LD 702 onto absorbent porous surfaces can be improved by applying a base coat comprised of one unit of acryl and three units of water

Table - applications of primers for sealants

15

1C – Low Expansion Foam Maxx

Foams / Adhesives

1C – Gun Foam / Winter Gun Foam

1C - Elastic Gun Foam

Colourgreen

Advantages• low expansion • application temperature from –10 °C• excellent dimensional stability • excellent foam structure and easy cutting Packaging850 ml – 12 pieces in a carton

MaterialUnique single-component polyurethane foam that cures with air moisture and uses a Fre-on-free gas propellant. The foam is not UV resistant.

Application1C – Low Expansion Foam Maxx is a highly stable PUR material particularly suited for the sealing of connecting joints around win-dows and doors. This product serves both as a thermal and sound insulation material, also suitable for bonding applications. The foam is suitable for all-year-round application.

Colourgreen

Advantages• excellent adhesion to concrete, brickwork, plaster, stone, wood, metal, plastic • Freon-free• good dimensional stability Packaging750 ml – 12 pieces in a carton

MaterialSingle-component polyurethane foam that cures with air moisture and uses a Freon-free gas propellant. The foam is not UV re-sistant. The winter version 1C – Winter Gun Foam guarantees trouble-free application from –10 °C.

ApplicationThe high-quality PUR material is suited for the sealing of connecting joints around win-dows and doors. This product serves both as a thermal and sound insulation material, also suitable for bonding applications. The foam is suitable for all-year-round application.

Colourwhite

Advantages• elasticity of more then 35%• application from -3°C• low post-expansion

Packaging500 ml700 ml

MaterialSingle-component polyurethane foam that cures with air moisture and uses a Freon-free gas propellant. The foam is not UV resistant.

ApplicationThis elastic single-component PUR foam is particularly suitable for mounting door and windows frames as well as filling and sealing wall connection joints. It has a very high elasticity of more then 35 % and is therefore particularly suitable for expansion joints.

1C Fire Retardant Gun FoamColourgrey

Advantages• hydrocarbon-free • good dimensional stability

Packaging700 ml – 12 pieces in a carton

MaterialSingle-component polyurethane foam that cures with air moisture and uses a Freon-free gas propellant.

ApplicationFire Resistant Gun Foam is a modified, sin-gle-component foam designed for the filling and sealing of joints, which are designated as increasingly resistant to flame. This pro-duct may also be used as sound and thermal insulation material.

16

Colourgreen

Advantages• easy application • good adhesion to a wide range of base surfaces • dimensional stability Packaging750 ml – 12 pieces in a carton

MaterialSingle-component polyurethane foam that cures with air moisture and uses a hydrocar-bon-free gas propellant.

ApplicationThe Mounting Foam is designed for one-off applications, particularly for small contractors as an application gun is not required for its application. The material is primarily desi-gned for thermal insulation and the sealing of joints or gaps.

1C – Mounting Foam

Colourgreen

Advantages• better and more comfortable application • foam structure at the level of gun foam • 50% higher coverage compared to stan dard mounting foam• accurate dispensing Packaging750 ml – 12 pieces in a carton

MaterialSingle-component polyurethane foam that cures with air moisture and uses a Freon-free gas propellant. Its unique formula and paten-ted nozzle design gives ultimate yield ca 50% higher in comparison to standard mounting foams and one-off application is not required.

Applicationillbruck 1C – Comfort Foam is suited for the filling and sealing of cavities and joints. The foam is a good thermal insulator and can also be used in bonding applications. Specially desi-gned cap shape offers much easier one hand application as well as better dispensing control.

1C – Comfort Foam

1C – Water Well Mounting Foam

2C – Mounting Foam

Colourgreen

Advantages• easy application • suitable for water well applications • good resistance to water, moisture and soil Packaging750 ml – 12 pieces in a carton

MaterialSingle-component polyurethane foam that cures with air moisture and uses a hydrocar-bon-free gas propellant.

Application1C Water Well Mounting Foam is designed for joint sealing particularly in water well details between its concrete elements or stones. It has excellent adhesion to a wide range of materials such as concrete, brick-work, wood, metals and plastics.

Advantages• excellent initial adhesion • fast application due to fast curing• dimensional stability and heat resistant • can be painted and plastered over Packaging400 ml – 12 pieces in a carton

MaterialFast curing double-component polyurethane foam that uses a Freon-free gas propellant.

Application2C – Mounting Foam is particularly suitable for the installation of interior door frames and sets, window frames, wooden panels and also to fill grooves, cracks and to seal joints.

Colourgreen

17

Advantages• patented nozzle shape for clean and fast application • can be cut after 90 seconds • coverage up to 4.5 litres • door frame installation completion in 20 min. Packaging210 ml – 12 pieces in a carton

MaterialExtremely fast curing double-component polyurethane foam without propellant. Fully loadable within 20 minutes.

ApplicationThe foam is particularly suitable for the fast and yet high-quality installation of interior door frames and sets, window frames, wooden panels etc.

Colourbeige

2C – Fast Curing Foam

MaterialSingle-component neutral silicone that cures with air-moisture and is specially designed for affixing mirrors.

ApplicationThis silicone with exceptional adhesion qualities is designed to mount mirrors onto various surfaces. The silicone is fast reacting and has high shear strength.

Colourwhite

Advantages• high initial adhesion • fast reacting • high shear strength


SF 141 Mirror Adhesive

Adhesive foam 010Colourgreen

Advantages• easy and fast application• loading time after approximately 3 hrs• open time between 30 – 40 min• ergonomic, light-weighted packaging • standard equipment for PU foams can be used Packaging750 ml – can

MaterialUnique one-component polyurethane foam that cures with air moisture and uses a Fre-on-free gas propellant. The foam is not UV resistant.

Application1C – Adhesive foam 010 is specially desi-gned for the bonding of EPS ( Extruded polystyrene ) boards mainly in EIFS ( Exterior insulation façade systems ) applications. This new EPS board adhesive foam displays much better thermal insulations properties than standard adhesives and offers an ea-sier, faster and more effective application. Product complies with the EIFS standards and requirements.

18

PU 01/08 Gun AdhesiveColourbrown

Advantages• fast easy application• very strong bond• highly efficient, higher coverage than standard PU adhesives Packaging700 ml – can

MaterialOne-component adhesive based on modified polyurethane pre-polymers that cures with air moisture. Resistant against water, diluted acids and most solvents. Correspond to EN 204/205 D4 and WATT 91 requirements.

ApplicationPU 08 Gun Adhesive is particularly suitable for wood on wood bonding such as wooden window frames construction bonding, details in wood pre-cast houses, wood floors bon-ding etc. Furthermore it is suitable for wood bonding on a variety of base surfaces such as with wooden steps on concrete, metal, natural stone and for roof applications. PU 08 can be applied with standard PU foam gun or the special shorter barrel PU foam gun that allows better application control..

Advantages• fast curing • very strong adhesive strength• high temperature resistance• good resistance to diluted acids and common solvents Packaging310 ml – cartridge

MaterialOne-component thixotropic transparent adhe-sive based on solvent-free modified polyure-thane that cures with air moisture.

ApplicationPU 11 is designed for the fast bonding of porous materials connections e.g. wood on wood, wood onto concrete, natural stone, insulation material as well as porous onto non-porous materials connections e.g. sandwich panels to create a strong weather and tem-perature resistant bond. Classified as D4 for interior and exterior applications

Colourtransparent

PU 11 Construction Adhesive Rapid

PU 12 Construction Adhesive Advantages• easy applied liquid adhesive • limited expandability• suitable for dry and semi-dry wood Packaging750 g – bottle5 and 20 kg – container

Larger packaging sizes avaible on request.

MaterialOne-component liquid water resistant adhe-sive based on modified polyurethane that cures with air moisture.

ApplicationPU 12 is designed to create water and temperature-resistant bonding of sandwich panels, plywood, polyurethane plates, exotic woods, and wood connections. Correspond to the EN 204 class D4 for interior and exte-rior application.

Colourtransparent

19

PU 13 Construction adhesive UltraBenefits• fast curing• high adhesive strength• high temperature resistance• resistant against diluted acids, alkaline substances and most solvents Packaging310 ml – cartridge

MaterialOne-component thixotropic transparent adhesive based on solvent-free modified po-lyurethane that cures with air moisture.

ApplicationPU 13 is designed for porous material connections e.g. wood on wood, wood on concrete, natural stone, insulation materials as well as porous onto non-porous material connections e.g. sandwich panels to create a strong weather and temperature resistant bond. Classified as D4 for interior and exteri-or applications

Colourtransparent

Colourbeige

Benefits• good adhesion to metals• high adhesive strength• filling capacity due to the expansion properties• high temperature resistance• resistant against diluted acids, alkaline substances and most solvents Packaging310 ml – cartridge

MaterialOne-component thixotropic transparent adhe-sive based on solvent-free modified polyure-thane that cures with air moisture.

ApplicationPU 14 is designed for porous material connec-tions e.g. wood on wood, wood onto concrete, natural stone, insulation materials as well as porous onto non-porous material connections e.g. sandwich panels to create a strong wea-ther and temperature resistant bond. Due to its ability to expand, PU14 has additional filling capabilities. Classified as D4 for interior and exterior applications.

PU 14 Construction adhesive Multi

PU 15 Roof AdhesiveColourbrown

Advantages• fast and easy application• very strong bonding• high temperature resistance• resistant against diluted acids, alkaline substances and most solvents Packaging5.5 kg – metal container

MaterialOne-component water resistant adhesive based on modified polyurethane that cures with air moisture.

ApplicationPU 15 Roof adhesive is designed for bonding various insulation materials e.g. EPS, PU and mineral wool to materials such as con-crete, bitumen roofing felt, vapour barriers, trapezoidal corrugated sheets, wood etc. It is particularly suitable for sandwich panel applications.

20

PU 40 Sealant adhesiveAdvantages• long-term chemical resistance to a number of chemicals • resistant to the effects of weather and ageing • excellent compatibility with a variety of coatings • good adhesion to variety of surfaces without use of primer

Packaging310 ml – 12 pieces in a carton600 ml – 20 pieces in a carton

MaterialPU 40 Sealant is a single-component polyu-rethane material that cures with air-moisture

ApplicationPU 40 is particularly suited for heavy and light precast panel expansion joints, wood, aluminium and PVC joinery seams, and expansion joints in traditional construction. Additionally used for the bonding and sealing of sandwich panels and elements in the buil-ding industry.

Colourwhite, grey, other colours on demand

Advantages• long-term chemical resistance to a number of chemicals • resistant to the effects of weather and ageing • excellent adhesion and compatibility with a variety of coatings Packaging310 ml – 12 pieces in a carton

MaterialPU 50 Sealant is a single-component polyure-thane material that cures with air-moisture

ApplicationTypically used for industrial applications such as in the automobile and coach building indus-try, for the bonding of sandwich panels and elements in the building industry, refrigeration and insulation technologies.

Colourwhite, grey

PU 50 Sealant adhesive

PU 82 2C - Construction AdhesiveColourbeige, special colour pigments available on demand

Advantages• high joint strength • UV and weathering resistant• can be abraded and painted over Packaging550 g – 6 pieces in a carton900 g – 6 pieces in a carton

MaterialThixotropic, non sagging polyurethane adhe-sive, solvent-free with excellent resistance to weathering and aging that can be painted over after curing.

ApplicationPU 82 2C Construction bonding of anodized or powder varnished aluminium profiles - corner formations for making aluminium windows and doors.

21

MS 40 Sealant AdhesiveColourtransparent

Benefits• excellent adhesion to majority of conventional building materials • suitable for styrene bonding• permanent elasticity • compatible with dispersive and alkyd resin coatings


MaterialMS polymer based high quality single-com-ponent adhesive and sealing material that cures with air-moisture.

ApplicationExcellent for bonding and final sealing of low movement joints between aluminium and synthetic materials on façades, balconies and conservatories, for affixing decorative and protective trims, profiles, window ledges, co-vering frames, decorative frames etc.

Colourwhite, black

Advantages• excellent adhesion to majority of conventional building materials • suitable for styrene bonding, thinner and isocyanate-free • permanent elasticity • compatible with dispersive and alkyd resin coatings Packaging290 ml – 12 pieces in a carton

MaterialMS polymer based single-component adhe-sive and sealing material that cures with air-moisture.

ApplicationExcellent for bonding and final sealing of low movement joints between aluminium and synthetic materials on façades, balconies and conservatories, for affixing decorative and protective trims, profiles, window ledges, co-vering frames, decorative frames etc.

MS 55 Sealant adhesive

OT 12 PVC AdhesiveColourwhite

Advantages• good temperature resistance• excellent UV resistance• no yellowing• good weather resistance Packaging200 g – tube

MaterialPVC adhesive, based on a vinyl chloride poly-mer with solvent, for the quick construction-al bonding of PVC hard parts and trims.

ApplicationParticularly suitable for PVC window profiles bonding, drainage and protective trims, win-dow blinds guided trims bonding etc. It is further possible to use it for PVC pipe bondi-ng in sanitary applications as well as general-ly had PVC constructional bonding.

OT 13 Contact Adhesive Colourblack

Advantages• excellent resistance to ageing • strong and elastic joint • good resistance to temperature fluctuations and water • high strength obtained immediately after application Packaging4.7 kg


MaterialSynthetic rubber and resin based high-vis-cous contact adhesive.

ApplicationOT 13 Contact adhesive is a special adhesive designed for contact adhesion of the illbruck FF 220 and illbruck FF 210 foils, particularly in façade applications onto base surfaces from wood, metals, brickwork and other building materials, with which the product is compatible. Such joint is highly resistant to the effects of weather, ageing, temperature fluctuations, can absorb dilatations move-ments and is water-tight.

22

OT 15 Paste AdhesiveAdvantages• very easy, fast and precise application • excellent joint strength • excellent long-term resistance to ageing • good resistance to temperature fluctuations and water



MaterialSynthetic rubber based polymer.

ApplicationOT 15 Paste adhesive is specially designed for adhesion of the illbruck FF 220 and FF 210 foils and onto base surfaces such as alumi-nium, steel, zinc-coated sheet metal, wood, hard PVC or other non-porous materials.

Colourblack

Advantages• compatible with styrene and PUR boards• excellent joint strength • excellent long-term resistance to ageing • good resistance to temperature fluctuations and water Packaging600 ml – 20 pieces in a carton


MaterialSolvent-free synthetic rubber based polymer.

ApplicationOT 20 Paste adhesive is specially designed for adhesion of the illbruck FF 220 and FF 210 foils and onto base surfaces such as styrene, alu-minium, steel, zinc-coated sheet metal, wood, hard PVC or other non-porous materials.

Colourblack

OT 20 Paste Adhesive

MT 13 Mounting Adhesive Extra Advantages• water-tight • fast and high adhesion • for exterior as well as interior applications • good resistance to temperature Packaging310 ml – 12 pieces in a carton

MaterialNeoprene rubber based high-quality moun-ting adhesive.

ApplicationMounting adhesive for the bonding of PVC skirting-boards and profiles, window ledges, wooden racks, trims, sills, boards and interi-or facings. Not suitable for bonding polysty-rene.

Colourbeige

MT 11 Mounting Adhesive EcoColouroff white

Advantages• solvent-free and almost odour-free • easy application (non-fibrous) • thixotropic adhesive (non-sagging) Packaging310 ml – 12 pieces in a carton

MaterialSynthetic resin dispersion based universal mounting adhesive, solvent-free

ApplicationMounting adhesive for bonding trims to wood, stone, concrete, plaster and for the bonding of facing-boards and slab wooden sills such as hard panels, plywood-boards, particleboards and ceiling boards etc. Can be also used on sandwich insulation boards pro-duced from polystyrene and polyurethane.

23

NahtpasteAdvantages• can even be applied to damp surfaces • ability to even out larger unevenness in the base surface • good adhesion to problematic base surfaces



MaterialPolymer dispersion based high-quality sea-ling and adhesive material.

ApplicationLong-term elastic self-adhesive sealing mate-rial designed to create joints between illbruck window foils and base surfaces. Such joints are leakage-resistant and air-tight. Adheres to brickwork, concrete, lime blocks, plaster and wood.

Colourgrey-white

Colourwhite / transparent

Benefits• fast curing• strong adhesion• transparent after curing Packaging750 g5 kg25 kg

Larger packaging sizes available on request.

MaterialWhite coloured PVAC adhesive based on syn-thetic resin, solvent-free that cures through water evaporation.

ApplicationWD 11 is suited for the bonding of all kinds of wood on wood applications e.g. hard, soft and tropical woods in interior applications such as furniture, interior doors, etc. Classified D2 for interior applications with limited resistance to humidity where wood water content doesn’t exceed 18%.

WD 11 Wood adhesive D2

WD 12 Wood adhesive D2 RapidColourwhite / transparent

Benefits• very fast curing• strong adhesion• transparent after curing Packaging750 g5 kg25 kg


MaterialWhite coloured PVAC adhesive based on synthetic resins, solvent-free that cures through water evaporation.

ApplicationWD 12 is suited for the bonding of all kinds of wood on wood applications e.g. hard, soft and tropical woods in interior applications such as furniture, interior doors, etc where fast bond setting is required. Classified D2 for interior applications with limited resi-stance to humidity where wood water con-tent doesn’t exceed 18%.

24

WD 13 Wood adhesive D3/D4Colourwhite / transparent

Benefits• fast curing• exterior and interior applications• easy to extend to D4 class adhesive• strong adhesion• transparent after curing Packaging750 g5 kg25 kg


MaterialWhite coloured PVAC adhesive based on synthetic resins, solvent-free that cures through water evaporation.

ApplicationWD 13 is suited for the bonding of all kinds of wood on wood applications e.g. hard, soft and tropical woods in both interior and exte-riors but only for weather protected appli-cations such as furniture, interior doors, etc. Classified D3 for applications with high resi-stance to water moisture requirements but only weather effects protected. It is easy to extend this adhesive to the fully weather resistant D4 class type suitable for exterior applications with the addition of WD 14 hardener. Can be used for the bonding of multiplex boards - plywood.

Benefits• fast curing and water resistant• exterior applications• strong adhesion• easy to mix with WD13 Packaging250 g1 kg

MaterialA polyurethane based hardener.

ApplicationUsed as hardener to reach D4 adhesive classi-fication (EN 204/205) in combination with the WD13 Wood adhesive.

Colourbeige

WD 14 Wood adhesive hardener D4

CT 11 Contact AdhesiveBenefits• rapid bond formation• water resistant• high adhesive strength Packaging750 g – metal canister5 kg – metal canister

MaterialLiquid, solvent based contact adhesive, based on polychloroprene.

ApplicationCT 11 Contact adhesive is particularly sui-table for bonding various materials such as plastic laminates to wood, particle board, metal and other generally non-porous mate-rial surfaces.

Colourtransparent

25

CT 12 Contact Adhesive GelColourtransparent

Advantages• rapid bond formation• water resistant• high adhesive strength

Packaging750 g – metal canister5 kg – metal canister

MaterialThixotrophic, solvent based contact adhesive, based on polychloroprene.

ApplicationCT 12 Contact adhesive gel is particularly suitable for bonding various materials such as plastic laminates to wood, particle board, metal and other generally non-porous material surfaces.

Advantages• rapid bond formation• water resistant• high adhesive strength Packaging25 kg – metal canister

MaterialSpray-able, solvent based, contact adhesive, based on polychloroprene.

ApplicationCT 12 Contact adhesive spray is particularly suitable for bonding various material such as plastic laminates to wood, particle board, metal and other generally non-porous material surfaces.

Colourtransparent

CT 13 Contact Adhesive Spray

SF 14 Spray adhesive Colourcream

Advantages• increased productivity of application by 70%• safe, clean, efficient installation• comfortable and easy application• solvent free and non-flammable• zero VOC Packaging17 kg – pressurized canister 24 pcs / pallet

Related productsSF Spray Cleaner, application gun, application nozzle

MaterialWater-based, solvent-free latex adhesive for a range of smooth-backed floor coverings that utilises a unique patented spray appli-cation.

ApplicationTreadfast SF 14 is suitable for bonding Ac-tion Back and other smooth-backed carpets to variety of a base floor materials such as common smoothing compounds, concrete, sand screed, wood, metal. Due to its unique spray application productivity can be increa-sed by as much as 70%. Adhesive is solvent free, non-flammable, will not promote bacte-ria growth in wet or dry state and is classi-fied EC 1 according to GEV-EMMICOCE.

26

SF 22 Contact spray adhesiveAdvantages• increased productivity of application by 70%• rapid drying time• safe, clean, efficient installation• comfortable and easy application• solvent free and non-flammable• zero VOC

Packaging17 kg – pressurized canister 24 pcs / pallet


MaterialWater-based, solvent-free latex aerosol spray adhesive for a range of smooth-backed floor coverings that utilises a unique patented spray application.

ApplicationTreadfast SF 22 is particularly suited for bondi-ng of wide range of floor coverings in vertical or horizontal loaded applications e.g. stairs, facings and wall details to variety of a base floor materials such as common smoothing compounds, concrete, sand screed, wood, metal. Adhesive is solvent free, non-flamma-ble, will not promote bacteria growth in wet or dry state.

Colourpale pink

Colourpale pink

Benefits• rapid drying time• safe, clean, efficient installation• comfortable and easy application• solvent free and non-flammable• zero VOC

Packaging358 ml – can

MaterialWater-based, solvent-free latex repair aerosol spray adhesive for a range of smooth-backed floor coverings.

ApplicationTreadfast SF 24 is particularly suited for small areas or repair installations bonding of a wide range of materials, including vinyl or rubber flooring carpet tiles etc. It can be used on porous or non-porous substrates such as metal, wood, fibreglass, concrete, common smoothing compounds and sand screed. Adhesive is solvent free, non-flammable, will not promote bacteria growth in wet or dry states.

SF 24 Spray adhesive

SF 18 Spray adhesiveColourgreen

Advantages• increased productivity of application by 70%• safe, clean, efficient installation• comfortable and easy application• permanent or easy removable bond • open time 48 hrs• zero VOC

Packaging17 kg – pressurized canister 24 pcs / pallet


MaterialWater-based, solvent-free latex adhesive for a range of smooth-backed floor coverings that utilises a unique patented spray application.

ApplicationTreadfast SF 18 is suitable mainly for bondi-ng rubber backed or PVC backed carpet tiles and PVC floor coverings to variety of a base floor materials such as common smoothing compounds, concrete, sand screed, wood, metal. Due to its unique spray application productivity can be increased by as much as 70%. Adhesive is solvent free, non-flamma-ble, will not promote bacteria growth in wet or dry state and is classified EC 1 according to GEV-EMMICOCE.

27

Advantages• without application weather condition limitations • easy and fast window insulation carried out within a single work step • weather effects resistant • ideal for movement/connection joints

SizesThickness in mm: 5 -10 / 7 - 15 / 10 - 20Width in mm: 50 / 58 / 66 / 77

For further information on application of the product see the page 8.

Tapes

MaterialPre-compressed soft polyurethane foam ta-pe with an open cell structure, impregnated with a synthetic fire retardant resin. Diverse water vapour diffusion properties are achieved by using different impregnation on sidewall surfaces.

ApplicationThe material is particularly suited for a very fast sealing of connecting joints between window/door frames and the reveal. Such a connection is water-tight, air-tight and the joint is also thermally insulated.

Colouranthracite, interior side: light grey

illmod Trio

illmod 600

illmod eco

Advantages• 10 year guarantee within the „i3“ system*• proven resistance against water penetration up to a pressure of 600 Pa• water vapour permeable • adhesive applied on tape on one side facilitates affixing during installation • the tape can be painted over with conventional dispersive paints • without application temperature limitation

SizesThickness in mm: 2 / 3 / 3 - 7 / 5 - 10 / 8 - 15 / 10 - 18 / 13 - 24 / 17 - 32 / 28 - 40Width in mm: 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50Other sizes available upon request.

This product is a part of window sealing system (page 7)

MaterialPre-compressed single-side adhesive PUR tape with an open cell structure, impregna-ted with synthetic resin.

ApplicationSealing against driving rainwater, dust, noise. Extremely suited for the connecting joints of building envelopes, i.e. façade, windows.

Colourgrey, anthracite


Advantages• tight against water leakage and air transmission • water vapour permeable• adapts its elasticity to the joint’s movements

SizesThickness in mm: 2 / 3 / 4 (3 - 6) / 6 (5 - 9) / 8 (7 - 12) / 10 (9 - 15)Width in mm: 10 / 15 / 20 / 25 / 30

Other sizes available upon request.

MaterialPre-compressed single-side adhesive PUR tape with an open cell structure and polymer impregnation.

ApplicationSealing against driving rainwater, dust, noise. The tape is suited for the connecting joints of building envelopes, i.e. façade, windows.


28

illac 600

illac

illmod i

illmod a

Colourgrey

Advantages• slower expansion rate• driving rain tightness up to 600 Pa• UV stable • open to water vapour diffusion

SizesThickness in mm: 2 / 4 / 6 / 8 / 12Width in mm: 10 / 15 / 20 / 25 / 30

MaterialPre-compressed polyurethane foam based tape primarily with an open cell structure and dispersive impregnation.

ApplicationThe material is used to create an effective barrier that provides long-term protection against penetration by driving rainwater and is at the same time water vapour permeable. It is used mainly in connecting joints, where the tape’s ability to even out dimensional to-lerances can be particularly appreciated.

Advantages• single-side adhesive tape for easy installation • good compatibility with conventional sealing materials • application is independent from temperature

SizesThickness in mm: 2 / 3 / 4 / 6 / 8 / 10Width in mm: 10 / 15 / 20 / 25 / 30


MaterialPre-compressed single-sided self-adhesive PUR tape with an open cell structure and acrylic polymer impregnation.

ApplicationNoise, dust and draught tight, thermal bridge prevention. Can be used also as a spacing tape. Suited for butt as well as movement/connecting joints. Ideal for joint sealing of ribbon windows, conservatories.


Advantages• easy and economical application • the sealing tape’s expansion activates only after its installation

SizesThickness in mm: 5 - 10 / 8 - 15Width in mm: 15 / 20

Materialillmod i is impregnated, pre-compressed PUR (polyurethane) tape encapsulated within a PP (polypropylene) foil.

ApplicationSuited for the final sealing of the interior connecting joints or non-system trims during installation of windows and doors.

Colourgrey

Advantages• the tape can be activated as required after the removal of a section of the PP foil • minimum offcut owing to the length of the tape in a roll • driving rainwater-tight up to 600 Pa

SizesThickness in mm: 7 / 10 / 12 / 15 / 18Width in mm: 15 / 20

Materialillmod a is impregnated, pre-compressed top-quality PUR (polyurethane) tape encapsu-lated within a PP (polypropylene) film.

ApplicationSuited for sealing of the exterior side of the connecting joints around windows and façades where controlled expansion is re-quired

Colourgrey

29

illmod 2D

TV 110 PVC Foam Tape



Colouranthracite, brown colour available on request

Advantages• wide working range • open to vapour diffusion, driving rain tight• resistant to weather conditions• without application temperature limitation SizesThickness in mm: 3 - 9 / 5 - 12 / 6 - 18Width in mm: 14 / 14 / 18 /

MaterialPre-compressed soft polyurethane foam ta-pe with an open cell structure, impregnated with a synthetic resin on both sides and coated with acrylic adhesive.

Applicationillmod 2D is particularly suited for sealing connecting joints of metal halls, log houses and wooden pre-cast buildings and sandwich panels constructions as well as for details in facade envelopes providing protection against driving rain and wind. Due to the wide dimen-sional working range its uniqueness is to seal a range of joint’s widths with only 3 standard dimensions. illmod 2D soft material allows easy compression during the installation.

Colourblack, grey

Advantages• evens out dimensional tolerances • fast, easy and aesthetic sealing of many applications • UV, weather effects and chemical resistant

SizesThickness in mm: 3 / 4.5 / 6 / 10 / 12 / 15Width in mm: 9 / 12 / 15 / 19 / 25 / 30


MaterialSoft foam PVC tape with a predominantly closed cell structure, equipped with acrylic pressure adhesive on one side, covered with a protective liner.

ApplicationThe tape is particularly suitable for the creati-on of a dust-tight barrier, joint sealing against draught and thermal bridge sealing and prevention. The tape is used in prefabricated partition constructions, windows and doors, steel constructions and HAVC (heat, air, ven-tilation and cooling).

Colourblack, grey

Advantages• can be riveted or screwed through • fast, easy and aesthetic sealing of many applications • UV, weather effects and chemical resistant SizesThickness in mm: 1.5 / 3 / 4.5 / 6 / 10Width in mm: 9 / 12 / 15 / 19 / 25 / 30


MaterialPVC medium hardness foam based tape with a predominantly closed cell structure, equipped with acrylic pressure adhesive on one side, covered with a protective liner.

ApplicationThe tape is particularly suitable for the cre-ation of a dust-tight barrier, thermal bridge sealing and prevention, prevention of driving rain leakage. The tape is suited for joint sealing use in metal constructions, façades, skylights, prefabricated buildings and for dry glazing.

Colourblack, grey

Advantages• can be riveted or screwed through • UV, weather effects and many chemicals resistant • dimensionally stable even at high load bearing • excellent vibration and shock reduction and absorption

SizesThickness in mm: 7 / 10 / 12 / 15 / 18Width in mm: 15 / 20

MaterialPVC hard foam based tape with a predomi-nantly closed cell structure, equipped with acrylic pressure adhesive on one side, cove-red with a protective liner.

ApplicationThe tape is particularly suitable for joint sealing against draught, thermal bridge sea-ling and prevention, prevention of driving rain leakage and vibrations dampening. The tape is suited for joint sealing use in metal constructions, façades, skylights, prefabrica-ted buildings and for dry glazing.

30

illrid

TO 110 EPDM Foam Tape

TE 121 PE Foam Tape

PERENNATOR PE Tape with Removable Protective Liner, PERENNATOR PE Tape with Integrated Liner

Advantages• soundproofing and vibration dampening• good resistance against diluted salts, lye, acids, salt water, oils and fats, glycerine and petrol • good resistance against ageing, weather effects and UV radiation • water-tight at 40% compression (column of water up to 50 mm) SizesThickness in mm: 3 / 4 / 5 / 6 / 8 / 10 / 12Width in mm: 10 / 15 / 20 / 30

MaterialSingle-side adhesive PVC tape primarily with a closed cell structure and impregnation.

ApplicationServes as water and noise insulation. Particularly suited for use between friction-connected joints, sealing in façades details, industrial prefabricated buildings etc.

Colouranthracite

Colouranthracite

Advantages• UV and weather effects resistant • dimensionally stable even at high load bearing • higher temperature resistance

SizesThickness in mm: 2 / 3 / 4 / 6 / 8 / 10Width in mm: 9 / 12 / 15 / 19 / 25 / 30


MaterialEPDM foam based tape with a predominant-ly closed cell structure, equipped with acrylic pressure adhesive on one side, solvent-free.

ApplicationThe tape is particularly suitable for use in thermal bridge sealing and prevention, joint sealing against draughts and for vibration dampening. The tape is extremely suited for dry glazing of interior constructions and for application in prefabricated buildings. Poly-carbonate compatibility.

Colouranthracite

Advantages• fast, easy and aesthetic application • good temperature resistance from –30 °C to +85 °C• easy compression SizesThickness in mm: 3Width in mm: 20 / 25 / 30 / 35 / 40 / 45 / 50 / 60 / 70 / 75 / 95 / 100


MaterialPolyethylene foam tape with integrated protective liner. The material is equipped with rubber adhesive on one side to facilitate installation.

ApplicationThe tape is a sealing and setting material suitable for applications such as plasterboard partitions, HAVC sealing, soft setting of steel constructions and in building envelopes details. The tape primarily serves for thermal bridge sealing and prevention, prevention of galvanic cell, sealing against dust and draught.

Colourwhite, anthracite

Advantages• excellent compatibility with silicone sealants • does not contain silicone; suitable for painting shops etc. • ideal as the spacing or backing material for sealants

SizesThickness in mm: 2 / 3 / 4 / 5 / 6 / 8 / 10Width in mm: 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPerennator PE Tape with Integrated Liner and PE Tape with Removable Protective Liner are PE foam based tapes with a predo-minantly closed cell structure, equipped with rubber adhesive on one side.

ApplicationThe products are suitable for the creation of a sealant bed for glazing, HAVC sealing, as a setting tape in building envelopes etc. It works reliably as basic sealing solution against dust and draught, as thermal bridge sealing and prevention and also prevents un-desirable contacts between constructions.

31

PE Round Profile

Pyrosil B Tape

TB 210 Butyl Tape

TB 211 Butyl Tape

Colourgrey

Advantages• easy application • optimization of sealant usage • no adhesion to silicone sealants

SizesDiameter in mm: 6 / 8 / 10 / 15 / 20 / 25 / 30 / 40 / 50


MaterialPolyethylene round profile primarily with a closed cell structure.

ApplicationServes particularly as an backing filler of joints that are then sealed with sealant bar-riers. PE round profile prevents excessive ineffective usage of sealant and at the same time ensures the correct and functional sea-lant body formation.

Colourwhite

Advantages• non-inflammable • non-toxic • high temperature resistance

SizesThickness in mm: 2 / 3 / 4 / 5 / 6 / 8 / 10Width in mm: 9 / 12 / 15 / 19 / 25 / 30


Related productsPERENNATOR Pyrosil B silicone sealant (page 30)

MaterialSelf-adhesive glass fibre tape bound with an organic bonding agent and coated with an acrylic adhesive strip on one side for easy installation. Asbestos free.

ApplicationPyrosil B Tape is a single-side adhesive sealing and spacing tape suitable for use on glazing in fire-resistant constructions, joint sealing in ventilating shafts, escape stairs, HAVC collars connection.The tape is suitable for joint sealing in metal constructions, façades, skylights, prefabrica-ted buildings.

Advantages• high joint tightness • excellent durability of the material• excellent adhesion SizesThickness in mm: 1 / 3 / 6Width in mm: 9 / 12 / 15 / 19 / 25 / 30

Other sizes available upon request

MaterialSynthetic butyl rubber based, double sided self adhesive sealant tape.

ApplicationFor water and the water vapour tight sealing of joints and foils used in building as well as automobile industry.

Colourblack

Advantages• excellent insulation properties • does not contain silicone • excellent adhesion to non-porous surfaces

SizesThickness in mm: 0.6 / 1 / 1.5Width in mm: 4 / 6 / 9 / 12 / 15 / 19


MaterialButyl rubber based, textile-reinforced sealant tape, double sided self-adhesive.

ApplicationWater and water vapour tight sealing of va-rious applications, e.g. roof foils connection, sandwich panels sealing, façade details, pre-fabricated buildings. Suitable for use in the building as well as engineering industry.

Colourblack

32

illbruck Butyl

TB 220 Butyl Round Profile with PVC Core

TA 200 Double-sided self-adhesive Acrylic Tape

TA 201 Double-sided self-adhesive PVC Tape

Colourgrey

Advantages• compatible with many conventional foils • good weathering resistance• excellent adhesion to non-porous surfaces

SizesThickness in mm: 1.5Width in mm: 10 / 15 / 20


MaterialSynthetic butyl rubber based double sided self adhesive sealant tape.

ApplicationFor water and the water vapour tight sealing of various insulation foils’ and frames con-nections as well as metal, wood and plastic parts connection in roofs, sandwich panels, façade details and prefabricated buildings applications. Suitable for use in the building as well as engineering industry.

Colourblack

Advantages• dilatation movement capability • wider joint sealing solution • excellent adhesion to non-porous surfaces

SizesDiameter v mm: 4.8 / 6.4 / 8 / 9.5


MaterialExtruded PVC foam based core primary with closed cells structure, coated with high-adhesion butyl.

ApplicationWater and water vapour tight sealing of connections with dilatations movements or wider joint dimension e.g.lorry cases and bodies, roof constructions, skylights, cooling boxes, application in building envelopes etc. Excellent water and moisture-tight sealing properties. Does not dry out.

Colourtransparent

Advantages• excellent UV resistance• high strength and long lasting bond • excellent moist-tightness

SizesThickness in mm: 0.25 / 0.64 / 1Width in mm: 9 / 15


MaterialDouble sided self-adhesive, pressure sen-sitive, solid acrylic adhesive body tape with protective PE liner.

ApplicationThe tape is suited for a wide range of interior as well as exterior industrial applications, where high requirements for the bond’s durability, resistance and strength are spe-cified.

Colourwhite

Advantages• good adhesion to non-porous surfaces • high initial adhesion • fast, easy and aesthetic application

SizesThickness in mm: 0.265Width in mm: 9


MaterialDouble-sided self-adhesive PVC tape equip-ped with acrylic adhesive and a protective liner.

ApplicationThe tape is used in applications that require high-quality bond including good load capaci-ty and durability. The tape is suited for use in applications that require high shear strength and excellent initial adhesive performance along with thin joint thickness.

33

TE 210 Double-sided self-adhesive PE Tape



Colourwhite, anthracite

Advantages• good adhesion of the tape to non-porous surfaces • immediate joint creation• fast, easy and aesthetic application

SizesThickness in mm: 2 / 3 / 4 / 6Width in mm: 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPE foam based tape with a predominantly closed cell structure, coated with acrylic adhesive on both sides, covered by a protec-tive liner.

ApplicationThe tape is suited for use in lightweight interior applications such as the bonding of trims, emblems or light facings in connection with sealant. The bonding creates a perma-nent joint.

Advantages• high initial adhesion • reduction or complete elimination of mechanical fasteners• fast, easy and aesthetic application• good adhesion onto many types of surfaces, e.g. plastics including polycarbonate, wood, metal and glass SizesThickness in mm: 1 / 1.5 / 3Width in mm: 4 / 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPE foam based tape with a predominantly closed cell structure, coated with rubber adhesive on both sides, covered by a protec-tive liner.

ApplicationThe tape is suited for interior use in appli-cations requiring a combination of excellent tack & load bearing capacity at normal temperatures. Due to its excellent initial ta-ckiness it is further employed as an auxiliary tape in adhering mirrors or other boards with silicone sealants.

Colourwhite

Advantages• reduction or complete elimination of mechanical fasteners • excellent resistance to effects of weather • fast, easy and aesthetic application• good adhesion to many types of surfaces, e.g. plastics including polycarbonate, wood, metal and glass

SizesThickness in mm: 1 / 2Width in mm: 4 / 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPE foam based tape with a predominantly closed cell structure, coated with acrylic pressure adhesive on both sides, covered by a protective liner.

ApplicationThe tape is suited for use in interior as well as exterior applications that require excellent adhesive performance and joint strength. It is used mainly in metal and façade construc-tions, modular units, glazing.

Colourwhite

34

V 2100 / V2200 Structural Glazing Tape

V 2800 Hi-performance Double-sided self-adhesive Tape

Advantages• dimensionally stable even at high load bearing • excellent UV, weather effects and fungi resistance • compatible with all structural façade silicones

SizesThickness in mm: 4.8 / 6.4 / 8Width in mm: 6 / 9 / 12 / 15 / 19 / 25 / 30


Related productsStructural Glazing silicone sealants

MaterialPUR foam based tape with an open cell struc-ture, coated with pressure adhesive on one or both sides, covered by a protective liner.

ApplicationV2100 Structural Glazing Tape is a unique, high-performance double-sided self-adhesive tape designed primarily as a spacer in joints between the insulation glass for structural façades and the base profile during bonding. The tape sets the space necessary for a subsequent application of the adhesive sea-lant in required thickness, serving as a per-manent connecting agent. A softer version V2200 is used for less even surfaces.

Colourblack

Advantages• high strong and long lasting bond • excellent environmental resistance• ideal for exterior applications• small joint thickness ( min 0.8 mm ) SizesThickness in mm: 0.8 / 1.2 / 1.6Width in mm: 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPUR foam based tape with a primarily closed cell structure, coated with high-performance acrylic adhesive on one or both sides, cove-red by a protective PE liner.

ApplicationThe tape is an ideal choice for severe ex-terior applications e.g. industrial bonding, construction bonding and transportation booth assembly. The tape is durable in all weather conditions and provides resistance against both UV light and extreme tempera-tures.

Colourblack

TE 220 Double-sided self-adhesive PE TapeAdvantages• very small thickness of joint (0.8 mm)• immediate joint creation• fast, easy and aesthetic application

SizesThickness in mm: 0.8Width in mm: 4 / 6 / 9 / 12 / 15 / 19 / 25 / 30


MaterialPE foam based tape with a predominantly closed cell structure, coated with acrylic adhesive on both sides, covered by a protec-tive liner.

ApplicationThe tape is suited for use in interior appli-cations such as the bonding of trims, em-blems, light facings in areas with constant temperature and humidity. The tape is used for the bonding of flat, non-porous surfaces, e.g. varnished wood, metal, plastic etc.

Colourblack

35

Table of tape / foils applications

This table serves as a tool for the selection of a suita-ble tape or foil for various applications. However, we recommend for you to consult the suitability with us after your selection. Not all possible applications are stated with all types to retain readability of the table.

Tapes / foils : PRN

Pe tapeTE121 PE rod TV110 TV120 TV130 illrid FF220 FF210 TO110

illmod Trio

illmod 600 illmod eco illac illac 600

Dimensional setting and thermal bridge prevention

x x x x

Dust and draught sealing x x x x x x x x x x x x x x x

Moisture transmission sealing x x x x x x x x x x x x

Water penetration sealing x x x x x x x x x

Vapour penetration sealing x

Sealing in fire resistant constructions

Self-adhesive tapes (bonding app.)

Pressure sealing

Surface protection

Particular application : PRN

Pe tapeTE121 PE rod TV110 TV120 TV130 illrid FF220 FF210 TO110

illmod Trio

illmod 600 illmod eco illac illac 600

Facade systems (glass, AL, steel, stone) x x x x x x x x x x x x x x

Cladding of buildings (sheet, steel, panels)

x x x x x x x x x x x x x x x

Roof systems x x x x x x x

Glazing x x x x x

Plasterboard structures x

Polycarbonate structures x x x x x x x x

Window connecting joints x x x x x x x

Heat, air ventilation and cooling x x x x

Fitting of machinery, glassed-in floors x x

Affixing of trims and decorative elements

Pre-cast houses x x x x x x x

Ambiance : PEF/ PEB TE121 PE rod TV110 TV120 TV130 illrid FF220 FF210 TO110illmod

Trioillmod 600 illmod eco illac illac 600

Exterior x x x x x x x x x x

Interior x x x x x x x x x x x

36

illmod i illmod aV2100V2200

Butyl TB210 TB211 Butyl ALU TB220 Bitumen ALU FO210 FO211 FO212 FO213 FO310 FO311 FO313 Pyrosil B

x x

x x x x x x x x x x x

x x x x x x x x x x

x x x x x x x x x

x x x x x x x x

x

x

x x x x



x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x

x x x x x x x x x

x x

x x x x

x x x

x x x

x



x x x x x x x x

x x x x x x x x x x x x

37

This table serves as a tool for the selection of a sui-table tape or foil for various applications. However, we recommend for you to consult the suitability with us after your selection. Not all possible appli-cations are stated with all types to retain readability of the table.

Table of tape applications

Tapes / foils : TA200 TA201 TE210 TE211 TE212 TE220Duo

Window Foil

FE FI BF WBF

Dimensional setting and thermal bridge prevention

Dust and draught sealing x x x x x

Moisture transmission sealing x x x x x x

Water penetration sealing x x

Vapour penetration sealing x x x x

Sealing in fire resistant constructions

Self-adhesive tapes (bonding app.) x x x x x x

Pressure sealing

Surface protection

Particular application : TA200 TA201 TE210 TE211 TE212 TE220Duo

Window Foil

FE FI BF WBF

Facade systems (glass, AL, steel, stone) x x x x x x x x

Cladding of buildings (sheet, steel, panels)

x x x x x x x

Roof systems

Glazing x x x

Plasterboard structures

Polycarbonate structures x

Window connecting joints x x x x x

Heat, air ventilation and cooling

Fitting of machinery, glassed-in floors

Affixing of trims and decorative elements

x x x x x x

Pre-cast houses

Ambiance : TA200 TA201 TE210 TE211 TE212 TE220Duo

Window Foil

FE FI BF WBF

Exterior x x x x

Interior x x x x x x x x x x

38

FF 220 EPDM Foil / FF 220 HP EPDM Foil

FF 220 EPDM foil with adhesive stripes

FF 210 Butyl Foil

Advantages• high resistance to mechanical damage • ability to transmit dilatation movements up to 250%• UV stable, extremely resistant to the effects of weather • high flexibility, easy to shape it for non-standard details

SizesThickness in mm: 0.7 / 1.2Width in mm: 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 500 / 600 / 750 / 1500


Related productsOT13 Contact adhesive, OT 15 and OT20 Paste adhesives


MaterialEPDM based sealant foil. The material does not contain any solvents that may migrate to surrounding surfaces over time.

ApplicationThe foil serves as sealing for the connecting joint between a window/door frame or a curtain wall glass facades and the adjacent construction. illbruck FF220 EPDM Foil ow-ing to its unique properties is designed for the creation of waterproofing barrier on the joint’s exterior side. Also available is illbruck FF 220 HP EPDM foil with a very low diffusi-on penetration coefficient.

Colourblack

Advantages• high resistance to mechanical damage • ability to transmit dilatation movements up to 250%• UV stable, extremely resistant to the effects of weather • high flexibility, easy to shape it for non-standard details

SizesThickness in mm: 0.75 / 1.2Width in mm: 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400



MaterialEPDM butyl based pre-cut sealant foil pre-equipped with adhesive strips on either single or both sides that allow for affixing to windows, doors and reveals.

ApplicationThe foil serves as sealing for the connecting joint between a window/door frame and the adjacent construction. illbruck FF220 EPDM foil is designed for the creation of a wa-terproof barrier on the joint’s exterior side. Pre-cut foils are ideal for precise applications where the joint thickness is determined in advance.

Colourblack

Advantages• high resistance to mechanical damage • ability to transmit dilatation movements up to 250%• high tightness (minimal air transmission) SizesThickness in mm: 0.8 / 1.2Width in mm: 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 500 / 600 / 750 / 1500


Related productsOT13 Contact adhesive, OT 15 and OT20 Paste adhesives


MaterialSynthetic butyl based sealant foil. The mate-rial does not contain any solvents that may migrate to surrounding surfaces over time.

ApplicationThe foil serves as sealing for the connecting joint between window/door frames or a curtain wall glass facades and the adjacent construction. illbruck FF210 Butyl Foil is designed for the creation of an air-tight and water vapour tight barrier on the joint’s inte-rior side.

Colourblack

Foils

39

FF 210 butyl foil with adhesive stripes

illbruck Duo Foil EW

illbruck Duo Foil Flex

Advantages• high resistance to mechanical damage • stripes pre-equipped with various options of adhesives• ability to transmit dilatation movements up to 250%• high tightness (minimal air transmission)

SizesThickness in mm: 0.75 / 1.2Width in mm: 100 / 150 / 200 / 250 / 300 / 350 / 400



MaterialSynthetic butyl based pre-cut sealant foil pre-equipped with adhesive strips on either single or both sides that allow for affixing to windows, doors and reveals.

ApplicationThe foil serves as sealing for the connecting joint between window/door frames and the adjacent construction. illbruck FF210 Butyl Foil is designed for the creation of an air-tight and water vapour tight barrier on the joint’s interior side. Pre-cut foils are ideal for preci-se applications where the joint thickness is determined in advance.

Colourblack

Advantages• One type of foil for internal as well as external joint sealing • Duo Foil EW allows for the application of a single foil in all standard shapes of detail • selection of three alternative affixing methods • faster drying out of the connecting joint

SizesThickness in mm: 0.35Width in mm: 50 / 70 / 100 / 140 / 60 with mesh/ 90 with mesh

Related productsButyl & Bitumen primer, Nahtpaste


MaterialHumidity reactive unique foil equipped with adhesive strips that allow for affixing to win-dows, doors and reveals. Duo Foil EW has adhesive on both sides to affix the foil onto windows. Affix the foil to reveals with either the integrated butyl strip, with mesh to be embedded into fresh plaster, or with the Nahtpaste adhesive for the version without butyl.

Applicationillbruck Duo Foil EW is designed for the sea-ling of both the interior and exterior sides of window and door connecting joints. The foil changes its tightness against water vapour in accordance with changes in ambient hu-midity.

Colourgrey

Advantages• One type of foil for internal as well as external joint sealing • a guarantee of maximum evaporation and drying out of the joint’s thermal insulation • Duo Foil Flex with an integrated dilatation loop ensures the joint’s optimum movement capability

SizesThickness in mm: 0.35Width in mm: 60 - 80 / 80 - 110 / 50 - 70 with mesh / 70 - 100 with mesh



MaterialHumidity reactive unique foil equipped with adhesive strips that allow for affixing to win-dows, doors and reveals. Duo Foil Flex has an integrated movement loop for an easy sealing of irregular and very wide joints. Affix the foil to reveals with either the integrated butyl strip, with mesh to be embedded into fresh plaster, or with the Nahtpaste adhesive for the version without butyl.

Applicationillbruck Duo Foil Flex is designed for the sea-ling of both the interior and exterior sides of window and door connecting joints. The foil changes its tightness against water vapour in accordance with changes in the ambient humidity.

Colourgrey

40

illbruck Duo Foil Prefab

Window Foil Exterior (FE)

Window Foil Interior (FI)

Advantages• One type of foil for internal as well as external joint sealing • a guarantee of maximum evaporation and drying out of joint’s thermal insulation • single foil width for a wide range of joints

SizesThickness in mm: 0.35Width in mm: 35 mm (120 mm when unrolled) 26 mm (78 mm when unrolled)



MaterialHumidity reactive unique foil equipped with adhesive strips that allow for affixing to win-dows, doors and reveals.

Applicationillbruck Duo Foil Prefab is a window foil designed for the sealing of both the interior and exterior sides of window and door joints. The product is optimised for installation onto window and door frames prior to transporta-tion to the construction site.

Colourgrey

Advantages• 3 different wall affixing options • EW version allowing the foil to be adhered to windows in various ways • highly water vapour permeable • print on the foil enables easy identification and detail check

SizesThickness in mm: 0.35Width in mm: 50 / 70 / 100 / 140 / 60 mm with mesh / 90 mm with mesh



MaterialPolypropylene foil with adhesive strips that allow for affixing to windows, doors and reveals.

ApplicationWindow Foil Exterior is intended for creating a water-tight and yet highly water vapour permeable insulation layer on the exterior surface of connecting joints. The EW version of the Window Foil Exterior can be applied in all standard types of detail. The foil is availa-ble in 3 versions for easy affixing onto wall surfaces.

Colourfront: grey, back: white

Advantages• 3 different wall installation options • EW version allowing the foil to be adhered to windows in various ways • print on the foil enables easy identification and detail check

SizesThickness in mm: 0.35Width in mm: 50 / 70 / 100 / 140 / 60 mm with mesh / 90 mm with mesh



MaterialPolypropylene foil with adhesive strips that allow for affixing to windows, doors and reveals.

ApplicationWindow Foil Interior is intended for creating an air-tight and water vapour impermeable insulation layer on the interior surface of connecting joints. The EW version of the Window Foil Interior can be applied in all standard types of detail. The foil is available in 3 versions for easy affixing onto wall sur-faces.

Colourwhite

41

Window Butyl Foil (WBF)

Butyl Fleece (BF)

Butyl Alu

Colourgrey

Advantages• very good adhesion of the affixing strip in combination with window frame adhesive • excellent adhesion of butyl • the textile can be plastered and painted over

SizesThickness in mm: 1.2Width in mm: 75 / 100 / 150



MaterialButyl rubber based sealant foil, laminated with a synthetic textile on one side and equipped with adhesive strip for affixing to window and door frames.

ApplicationButyl Window Foil comprises of a self-adhe-sive plasto-elastic butyl rubber body of high adhesion, laminated with synthetic textile on one side. For a fast and easy application, the foil is equipped with a self-adhesive strip to affix window/door frames. The foil has been specially developed for the fast creation of high-quality water vapour tight insulation of window/door frame connecting joints. The foil can be completely covered by plaster or other coating.

Advantages• excellent adhesion to many types of surfaces without application of any primers • can be plastered or painted over by dispersed paints • able to transmit movements in transversal direction up to 10 %• easy, fast and cost effective application

SizesThickness in mm: 1.2Width in mm: 50 / 75 / 100 / 150



MaterialButyl rubber based sealing foil laminated with synthetic textile on one side.

ApplicationThe foil is dimensionally stable in the lon-gitudinal direction and allows for long-term stretching by up to 10 % in the transversal direction. Butyl Fleece foil is suited for the sealing of joints and cracks of profile ele-ments’ sealing in metal constructions during window/door frame installations.

Colourgrey

Advantages• good adhesion to many types of surfaces • UV and effects of weather resistant, water tight • suited for glass constructions• easy, fast and cost effective application

SizesThickness in mm: 1.2Width in mm: 40 / 45 / 50 / 60 / 75 / 100 / 150


MaterialThe tape consists of a self-adhesive plasto-elastic butyl rubber material with high adhe-sion qualities, equipped with strong, weather effect and UV resistant aluminium foil on one side.

ApplicationThe foil is suited for the sealing of joints and connections in various applications e.g. metal building constructions, conservato-ries, sky-lights, air-conditioning, ventilation, repairs and reinstating of weathered joints etc. Particularly suitable for application onto glass constructions due to the non-staining properties.

Colournatural aluminium / black or grey

42

Bitumen Alu

FO 310 PP Foil

FO 311, FO 313 Aluminium Foil

Colourlead, copper, natural aluminium, brick

Advantages• the tape is water-tight and UV resistant • easy, fast and effective budget priced sealing of joints • available in four colours

SizesThickness in mm: 1.2Width in mm: 45 / 50 / 60 / 75 / 100 / 125 / 150 /175 / 200 / 300


MaterialAluminium foil coated with bitumen rubber on one side.

ApplicationUniversally applicable self-adhesive tape, de-signed primarily for water and vapour sealing in various applications. Particularly suited for sealing of metal and plastic joints, eaves gut-ters, attic flashing, stove piping, roof ridge details, walls, drainpipes. Can be applied onto brickwork, plaster, concrete, wood, me-tals, steel, zinc, aluminium and glass.

Advantages• aesthetic appearance • easy and fast application

SizesThickness in mm: 0.055Width in mm: 38 / 45 / 50 / 75 / 100 / 150


MaterialMetal-plated PP (polypropylene) foil with acrylic adhesive applied on one side.

ApplicationSuited for applying over ventilation ducts, air-conditioning etc. Designed for air-tight insula-tion of joints and as a dust-tight barrier.

Colournatural aluminium

Advantages• high tightness (very good water vapour retardant and air-tight properties) • easy and fast application • good adhesion to most of conventional non-porous base surfaces

Sizes (for FO 311)Thickness in mm: 0.03Width in mm: 50 / 75 / 100

Sizes (for FO 313)Thickness in mm: 0.05Width in mm: 25 / 38 / 50 / 60


MaterialFO311 and FO313 are aluminium foils with a transfer acrylic adhesive for extended usable life on one side. The foils differ in the alumi-nium base’s thickness.

ApplicationFO311 and FO313 are aluminium foils with a transfer acrylic adhesive for extended usable life on one side. The foils differ in the alumi-nium base’s thickness.

Colournatural aluminium

FO 210 Masking TapeAdvantages• easy solution for protecting the covered surfaces against soiling • optimal adhesive properties • very easy manipulation and removal from the surface



MaterialImpregnated paper carrier coated with hot-melt adhesive

ApplicationShort therm covering and masking foil for painting and coating works. Ideal for covering surrounding surfaces during joint sealants application.

Colouryellow

43

FO 211 Masking Tape

FO 212 Protective Foil

FO 213 Protective Foil

Advantages• the advantage of this tape is its knurled surface, owing to which it is easy to uncoil • cold resistant • water-tight, resistant to moisture, oil, acids and many other chemicals

SizesThickness in mm: 1.16Width in mm: 50


MaterialPVC based masking foil with hot-melt adhe-sive applied to one side.

ApplicationUniversal masking tape for professional use. Used primarily for painting and plastering, designed for short-term covering of interior surfaces.

Colouryellow

Advantages• can be applied onto a wide range of base surfaces e.g. glass, stone, metals (except for copper and brass), ceramics and PVC • application on exterior surfaces for up to 3 months without the risk of adhesive residues after its removal

SizesThickness in mm: 0.05Width in mm: 50 / 75 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 1000


MaterialLDPE foil with acrylic adhesive applied to one side.

ApplicationSelf-adhesive covering foil for the protection of surfaces from damage and soiling duri-ng transportation, processing, storing and installation. Suited for temporary exterior application.

Colourblue

Advantages• the foil’s thickness optimally helps prevent against mechanical damage to the base surface • application on exterior surfaces for up to 9 months without the risk of adhesive residues after its removal • elasticity of the foil protects peeling off effect



MaterialHigh quality polyethylene foil with rubber adhesive applied to one side.

ApplicationSelf-adhesive covering foil for the protection of very sensitive surfaces from damage and possible soiling during transportation, processing, storing and installation. Suited also for temporary exterior application. Ideal protection solution for surfaces such as PVC profiles, varnished surfaces, powder paint coated metals, steel (brushed/rubbed), alu-minium (highly polished or brushed/rubbed) or anodized.

Colourblack

44

Advantages• controlled activation of the sealing tape after installation • unique roll packaging • air and vapour barrier • compensates for small unevenness of surfaces • professional sealing solution for reconstruction use in old buildings

SizesThe width of the trim when coiled:25, 35 and 50 mm

Packaging45 m – in a carton

MaterialSealing trim made from high-quality, colour-fast PVC with softened edge and integrated seal profile. Affix the trim onto a PVC profile using the integrated self-adhesive strip. Sup-plied in a unique roll packaging that provides effective storage and easier transportation and handling

ApplicationUsed exclusively for an air-tight seal on the interior side of PVC window/door frame con-necting joint.

ColourWhite

Window Trim Interior

Trims

Window Trim Exterior

Styrofoam window sill blocks system

Advantages• controled activation of the sealing tape after installation • unique roll packaging• water-tight up to 600 Pa• compensates for small unevenness of surfaces• professional sealing solution for reconstruction use in old buildings

SizesThe width of the trim when coiled: 25, 35 and 50 mm

Packaging45 m – in a carton

MaterialSealing trim made from high-quality, colour-fast PVC with softened edge and integrated seal profile. Supplied in a unique roll packa-ging that provides effective storage and easier transportation and handling.

ApplicationUsed exclusively for a water-tight seal on the exterior side of PVC window/door frame connecting joint. Affix the trim onto a PVC profile using the MS 55 Sealant adhesive in combination with TA 201 Double-sided self-adhesive PVC Tape or mechanically with screws or rivets.

Colourwhite

Colourwhite

Advantages• excellent thermal insulation properties • warm window sill solution• fast and easy application

SizesThickness / height in mm:according to detail specificationLength in mm: 1000

Please feel free to ask for further detailed info and system TDS.

MaterialSystem comprises of one or two extruded styrene foam blocks designed for particular detail applications and type of window pro-file. Additionally it is installed with the use of paste adhesive and special fast curing mortar with low thermal transmission rate. Sealed with illmod ECO tape.

ApplicationBlocks are designed for window ledge detail applications and serve as thermal and at the same time sealing air-tight and water tight barrier. The whole system is designed in advance customised to the project specifi-cation and in cooperation with the particular frame profile producer or supplier.

45

Accessories

Description Acetone and multi compound based transpa-rent liquid agent.

ApplicationFor optimum cleaning of glass, metal, glaze, plastic and other non-porous surfaces.

Colourtransparent

Advantages• optimum surface preparation for various applications • very fast evaporation

Packaging1 l – can

R40 Cleaner

Advantages• optimized for the perfect cleaning of hard PVC • does not leave any residues • very fast evaporation


MaterialMT15 Trim Cleaner is a quick-drying cleaning agent with slight odour.

ApplicationThe cleaner is used to clean PVC trims. It ex-ceptionally removes dust, adhesive residues from masking foils, grease and other non-cu-red residues of adhesive after application.

Colourtransparent

MT 15 Trim Cleaner

MaterialAcetone and lubricant based cleaner, deli-vered in a pressurised can.

ApplicationDesigned as a universal protective agent for all PUR guns. Use of the protective spray will maintain good functionality of the gun and also prevent corrosion also due to its special formula containing gun lubricant.

Colourtransparent

Advantages• optimised for the perfect cleaning of guns.• special adaptor for gun-off application • suitable also for removing fresh residues of paints, grease and adhesives

Packaging500 ml – can

PUR Cleaner

Advantages• quick drying, about 15 minutes • reinforcement of the base surface • improves adhesion


MaterialSynthetic resin based impregnation and adhesion promoter.

ApplicationButyl & Bitumen Primer is used as base coat and adhesive promoter to prepare the base surface for application of butyl and bitumen tapes particularly suited for the butyl adhe-sive strips of illbruck window foils.

Colourtransparent

Butyl & Bitumen Primer

46

MaterialMulti compound resin based impregnation agent.

ApplicationImproves adhesion of Perennator silicone sealants to absorbent and porous surfaces. There are one or more recommendations for each sealant and base surface combination, which are stated in „the table Applications of Primers“.

Colourcolourless to yellowish; forms film

Advantages• quick drying • light reinforcement of the base surface • improves adhesion

Packaging500 ml – tin

Primer S

Colourtransparent, does not form film

Advantages• very easy application • improves adhesion • quick drying

Packaging500 ml – tin

MaterialMulti compound liquid impregnation agent.

ApplicationImproves adhesion of Perennator silicone sealants to non-porous surfaces e.g. metals. There are one or more recommendations for each sealant and base surface combination, which are stated in „the table Applications of Primers“.

Primer NS

Perennator Glättmittel is used as a smoothing agent for Perennator sealants tooling. Conventional agents such as washing-up liquids are not suitable for these purposes as they have a negative impact on the cured silicone’s appearance (i.e. shine).

Glättmittel - Smoothing Agent

Guns for professionals and easy application of PUR foams. Spare parts for all guns are also available.

PUR Foam Guns

47

High-performance and long-life guns for pro-fessional purposes.

Mechanical Guns

High-quality guns for professionals. The silicone is dispensed from the gun by air pressure, which is supplied by a compressor, after the trigger is activated. The air pressure can be regulated. Spare parts for all pneuma-tic guns are also available.

Pneumatic Guns

All manipulators supplied by our company operate on the principle of a vacuum bet-ween the base surface and the manipulator’s rubber vacuum sleeve. Firstly, place the manipulator on a prepared surface and then use the integrated lever or the built-in vacuum pump to suck. The next step is the object’s transportation itself. To release the manipulator, use the integrated lever or the vacuum pump valve (differs by type). The base surfaces must be dry, clean, free from any grease and loose particles. It is also ne-cessary that the base surfaces are air-tight, i.e. impermeable.

Vacuum Manipulators

We also supply:• clamps – ideal help e.g. for the temporary fixing of bonded or otherwise worked objects. Clamps are supplied with metal as well as plastic jaws. • spatulas designed to tool and wipe off any excess material • setting blocks – durable and strong plastic setting blocks suited for glaziers, window/ door frame manufacturers etc.

Other accessories

Documents

Katalog en Final